Installation and Assembly - |
Adapter Bracket for VESA® |
||
|
|
600 x 200 Screens |
Model: PLP V6X2 |
|
|
|
|
IMPORTANT! Read instruction sheet before you start installation and assembly. |
|
||
Before you start make sure all parts listed are included with your product. |
|
||
Parts ListTS LIST |
|
AA |
BB |
Description |
Qty. |
Part # |
|
AA adapter bracket |
1 |
201-1068 |
|
BB M8 x 15 mm socket pin screw |
4 |
520-1068 |
|
CC 4 mm security allen wrench |
1 |
560-9646 |
|
CC
Some parts may appear slightly different than illustrated.
Attach adapter bracket (AA) to back of plasma screen using four M8 x 15 mm socket pin screws (BB) as shown. Tighten M8 x 15 mm socket pin screws (BB) using 4 mm security allen wrench (CC).
WARNING
• Do not overtighten! Overtightening may cause permanent damage to the screen.Torque to 26-35 in • lb (30-40 kg • cm).
BB
AA
1 of 1 |
ISSUED: 11-20-07 SHEET #: 202-9261-1 |
Visit the Peerless Web Site at www.peerlessmounts.com |
For customer service call 1-800-729-0307 or 708-865-8870. |
© 2007, Peerless Industries, Inc. All rights reserved.
All other brand and product names are trademarks or registered trademarks of their respective owners.