Peerless Industries PAP 113, PAP 113-S, PAP 113-W User Manual
Installation and Assembly - Projector Adapter Plate for
™
Mitsubishi
model Mitsubishi XL1U Projector
Models: PAP 1 13, P AP 1 13-S,
P AP 1 13-W
IMPORT ANT! Read entire instruction sheet
before you start installation and assembly.
Before you start check the parts list below to
make sure all of the parts shown are included.
Parts List
Description
AA adapter plate
BB M4 x .7 x 12 mm socket pin screw
CC 4 mm security wrench (for PAP only)
DD L bracket
EE M4 x .7 x 6 mm socket pin screw
FF adhesive foam pad
Note: Actual parts may appear slightly different than illustrated.
*Notch indicates front of projector.
Turn projector upside down. Attach adapter plate
(AA) to projector using three screws (BB).
Qty.
1
3
1
2
2
2
PAP 113
055-1186
520-1079
560-9646
055-1212
520-1059
570-0008
PAP 113-S
055-4186
510-2079
560-9646
055-4212
520-2059
570-0008
WARNING
• Installer must verify that the ceiling will safely support
four times the combined weight of all attached equipment and hardware.
PAP 113-W
055-2186
510-2079
560-9646
055-2212
520-2059
570-0008
BB
CC
Adhere foam pads (FF) to L-brackets (DD).
Secure projector by attaching two L-brackets to
adapter plate (AA) using two screws (EE).
Tighten all screws using 4 mm security allen
wrench (CC).
EE
DD
FF
AA
BB
EE
AA
AA
*
ADHERE PADS
TO L-BRACKETS
1 of 1
Visit the Peerless Web Site at www.peerlessindustries.com For customer service call 1-800-729-0307 or 708-865-8870.
© 2004 Peerless Industries, Inc. All rights reserved.
Peerless is a registered trademark of Peerless Industries, Inc.
All other brand and product names are trademarks or registered trademarks of their respective owners.
ISSUED:10-30-01 SHEET#: 055-9063-6 08-05-04
Loading...