Peerless Industries PAP 121-W, PAP 121, PAP 121-S User Manual

0 (0)
Installation and Assembly - Projector Adapter Plate for
Sharp
Models: PAP 121, PAP 121-S,
P AP 121-W
IMPORT ANT! Read entire instruction sheet before you start installation and assembly .
Before you start check the parts list below to make sure all of the parts shown are included.
Parts List
Description
AA adapter plate BB 1/4 CC M3 -.5 x 25 mm thumb screw DD 4 mm allen wrench EE retaining spacer FF spacer GG M3 - .5" x 6 mm phillips pan
Note: Actual parts may appear slightly different than illustrated.
- 20 x 3/8" socket pin screw
Flip projector upside-down and attach adapter plate (AA) using one socket pin screw (BB) and one phillips screw (GG) as shown. Tighten screw (BB) using 4 mm allen wrench (DD).
Qty.
1 1 1 1 1 1 1
PAP 121
055-1207 520-1109 560-1139 560-9646 590-1128 590-0108 520-1028
WARNING
• Installer must verify that the ceiling will safely support four times the combined weight of all attached equip­ment and hardware.
PAP 121-S
055-4207 520-2109 560-7139 560-9646 590-2128 590-0108 520-2036
PAP 121-W
055-2207 520-2109 560-7139 560-9646 590-2128 590-0108 520-2036
CC
BB
AA
DD
GG
FF
*Notch indicates front of projector. Secure adapter plate with thumb screw (CC), spacer (FF) and retaining spacer (EE) in remaining hole.
EE
AA
CC
FF
BB
GG
*
EE
1 of 1
Visit the Peerless Web Site at www.peerlessindustries.com For customer service call 1-800-729-0307 or 708-865-8870.
© 2005 Peerless Industries, Inc. All rights reserved. Peerless is a trademark of Peerless Industries, Inc. All other brand and product names are trademarks or registered trademarks of their respective owners
ISSUED: 12-27-01 SHEET #: 055-9073-5 03-09-05
Loading...