Installation and Assembly - Double Stack Box Accessory
IMPORTANT! Read entire instruction sheet before you start inst allation and assembly .
Before you b egi n, m ake sure all parts shown are included wit h your product .
Model: MIS-ACC201
Parts List
Description Qty. Part#
moun t i ng box 1 124-1841
A
til t brack et 1 200-1552
B
M10 x 15 mm pent a-pin s crew 8 520-9263
C
penta-pin driver 1 520-9260
D
u-bolt 2 560-1060
E
nylock nut 4 530-9310
F
flat washer 4 540-9454
G
: S om e parts may appear sli ght l y different than ill us trated.
NOTE
B
C
A
ED
F
Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-729-0307 or 708-865-8870.
G
1 of 3
ISSUED: 07-27-07 SHEET #: 124-9093-2 02-25-08
WARNING
• Installer must verify that the ceiling will safely support the combined weight of all attached equipment and
hardware.
Securely fasten mounting box (A) to support pipe
1
(not included) using two u-bolts (E), four flat
washers (G) and four nylock nuts (F).
F
E
G
A
fig 1.1
BY HAND, insert four M10 x 1.5 x 15 mm penta-pin screws (C) into threaded holes in the sides of ceiling arm
1- 1
box (A). Leave approximately 1/4" of exposed thread as shown in detail 1.
SUPPORT PIPE (NOT INCLUDED)
C
1/4"
C
DETAIL 1
fig 1.2
ISSUED: 07-27-07 SHEET #: 124-9093-2 02-25-082 of 3
Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-729-0307 or 708-865-8870.
Loading...