Loading...
ProSAFE Easy-Mount 8-Port Gigabit
Ethernet PoE+ Web Managed Switch
Model GS408EPP
User Manual
December 2016 202-11693-01
350 East Plumeria Drive
San Jose, CA 95134
USA
ProSAFE Easy-Mount 8-Port Gigabit Ethernet PoE+ Web Managed Switch
Support
Thank you for purchasing this NETGEAR product. You can visit www.netgear.com/support to register your product, get help, access the latest downloads and user manuals, and join our community. We recommend that you use only official NETGEAR support resources.
Conformity
For the current EU Declaration of Conformity, visit http://kb.netgear.com/app/answers/detail/a_id/11621.
Compliance
For regulatory compliance information, visit http://www.netgear.com/about/regulatory.
See the regulatory compliance document before connecting the power supply.
Trademarks
© NETGEAR, Inc., NETGEAR, and the NETGEAR Logo are trademarks of NETGEAR, Inc. Any non-NETGEAR trademarks are used for reference purposes only.
2
Contents
Chapter 1 Getting Started
Configure the Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Access the Switch Using a Web Browser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Access a Switch That Is Off-Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Access a Switch Connected to a Network. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Access the Switch With the ProSAFE Plus Configuration Utility . . . . . . . . . . . . . 7 Install the ProSAFE Plus Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Access the Switch Using the ProSAFE Plus Utility . . . . . . . . . . . . . . . . . . . . . . . 8 Change the Password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Chapter 2 Network Settings
Specify IP Address Settings for the Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Use Browser-Based Access to Specify the Switch IP Address. . . . . . . . . . . . 12 Use the ProSAFE Plus Utility to Specify the Switch IP Address . . . . . . . . . . . 13 Manage Multicast Traffic With IGMP Snooping . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Customize IGMP Snooping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Specify a VLAN for IGMP Snooping. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Set Up Link Aggregation Groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Chapter 3 Optimize Performance With Quality of Service
Enable 802.1p/DSCP-Based Quality of Service . . . . . . . . . . . . . . . . . . . . . . . . . 19 Enable Port-Based Quality of Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Set Up Rate Limiting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Set Up Broadcast Filtering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Chapter 4 Use VLANS for Traffic Segmentation
VLAN Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Create a Basic Port-Based VLAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Assign Ports to Multiple VLAN Groups. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Create 802.1Q-Based VLANs in a Basic Configuration. . . . . . . . . . . . . . . . . . . . 28 Create 802.1Q-Based VLANs in an Advanced Configuration . . . . . . . . . . . . . . 30 Add Tagged or Untagged Ports to an 802.1Q-Based VLAN. . . . . . . . . . . . . . . . 31 Specify a Port PVID for an 802.1Q-Based VLAN . . . . . . . . . . . . . . . . . . . . . . . . 32 Manage the Voice VLAN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Select the Voice VLAN and Class of Service . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Enable the Voice VLAN for Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Manage the OUI Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
3
ProSAFE Easy-Mount 8-Port Gigabit Ethernet PoE+ Web Managed Switch
Chapter 5 Manage and Monitor the Switch
Manage Flow Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Manage the Port Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Specify a Port Description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Enable Loop Detection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Control the Port LEDs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Enable the Power Saving Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Change the Switch Management Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Manage Access Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Add Devices to the Access Control Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Remove Devices From the Access Control Table . . . . . . . . . . . . . . . . . . . . . . . 47
Upgrade the Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Reboot the Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Save the Switch Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Restore a Saved Switch Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Restore Factory Default Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Enable Port Mirroring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
View Switch Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
View Port Statistics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Chapter 6 Manage Power over Ethernet
PoE Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 Device Class Power Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 Power Allocation and Power Budget . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 Manage and View the PoE Port Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 Reset One or More PoE+ Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Chapter 7 Diagnostics and Troubleshooting
Register Your Product. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 Test Cable Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 Resolve a Subnet Conflict to Access the Switch . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Appendix A Supplemental Information
Factory Default Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Technical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
4
1. Getting Started |
1 |
|
|
||
|
|
|
This user manual is for the ProSAFE® Easy-Mount 8-Port Gigabit Ethernet PoE+ Web Managed Switch, model GS408EPP.
For more information about the switch, see the following documents that you can download by visiting downloadcenter.netgear.com:
•ProSAFE Easy-Mount 8-Port Gigabit Ethernet PoE+ Web Managed Switch GS408EPP Installation Guide
•ProSAFE Easy-Mount 8-Port Gigabit Ethernet PoE+ Web Managed Switch GS408EPP Hardware Installation Guide
•ProSAFE Plus Configuration Utility User Manual
This chapter covers the following topics:
•Configure the Switch
•Access the Switch Using a Web Browser
•Access the Switch With the ProSAFE Plus Configuration Utility
•Change the Password
Note: For more information about the topics covered in this manual, visit the support website at netgear.com/support.
Note: Firmware updates with new features and bug fixes are made available from time to time at downloadcenter.netgear.com. Some products can regularly check the site and download new firmware, or you can check for and download new firmware manually. If the features or behavior of your product does not match what is described in this guide, you might need to update your firmware.
5
ProSAFE Easy-Mount 8-Port Gigabit Ethernet PoE+ Web Managed Switch
Configure the Switch
ProSAFE Web Managed (Plus) Switches are Plug-and-Play, so they can be used without any configuration. Just connect power, connect to your network and to your other devices, and you’re done. You can also configure and manage additional advanced features of the switch either by using your computer’s web browser or by installing the ProSAFE Plus Utility on your Windows-based computer.
For easiest access, we recommend that you cable the switch to a network with a router or DHCP server that assigns IP addresses, power on the switch, and then use a computer that is connected to the same network as the switch (on-network). However, it is also possible to configure the switch connected directly only to the computer that you are using to configure it, and not connected to the network (off-network). See the following sections for details about the different options for configuring your switch.
Access the Switch Using a Web Browser
You can access and configure the switch directly through its web-based user interface by entering the switch’s IP address in the address bar of a browser. When using web browser setup, the simplest way to configure the switch is not connected to your network (off-network). You can also configure the switch with it connected to your network, router, or modem, (on-network), but you must be able to determine the IP address of the switch if your network uses DHCP.
Access a Switch That Is Off-Network
To use your web browser to configure a switch that is not connected to a network:
1.Record your computer’s TCP/IP configuration settings, and then configure the computer with a static IP address of 192.168.0.210 and 255.255.255.0 as the subnet mask.
Note: If you are unsure how to do this, visit https:www.netgear.com/search-support.aspx and search for Static IP address on computer.
2.Plug the switch into a power outlet and then connect your computer to the switch using an Ethernet cable.
You can connect the Ethernet cable to any port on the switch.
3.Open a web browser, and enter http://192.168.0.239. This is the default address of the switch.
4.When prompted, enter the password. The default password is password.
5.Click the Login button.
Getting Started
6
ProSAFE Easy-Mount 8-Port Gigabit Ethernet PoE+ Web Managed Switch
You can now configure additional options for the switch in the web browser interface.
6.After you complete the configuration of the switch, reconfigure the computer that you used for this process to its original TCP/IP settings.
You can now connect your switch to your network using an Ethernet cable.
Access a Switch Connected to a Network
To use your web browser to configure a switch that is connected to a network:
1.Cable the switch to a network with a router or DHCP server that manages IP addresses.
2.Power on the switch.
The DHCP server assigns the switch an IP address.
3.Connect your computer to the same network as the switch.
4.Determine the IP address of the switch.
DHCP is enabled on the switch by default. Use the IP address that the DHCP server assigned to the switch. If you are unsure how to determine the IP address of the switch, you can use the ProSAFE Plus Configuration Utility or an IP scanner utility.
5.Open a web browser, and enter the IP address of the switch.
6.When prompted, enter the password. The default password is password.
7.Click the Login button.
You can now configure additional options for the switch in the web browser interface.
Access the Switch With the ProSAFE Plus Configuration
Utility
The ProSAFE Plus Configuration Utility runs on Windows-based computers. You can install the utility to select additional options to manage and customize the switch for your network. The utility is located on the resource CD that came with the switch. You can also visit support.netgear.com/product/PCU to download the utility and its user manual.
Install the ProSAFE Plus Utility
Note: The ProSAFE Plus Utility requires WinPcap and Adobe Air. If WinPcap and Adobe Air are not detected during ProSAFE Plus Utility installation, you are prompted to allow them to be installed.
Getting Started
7
ProSAFE Easy-Mount 8-Port Gigabit Ethernet PoE+ Web Managed Switch
To install the utility from the resource CD:
1.Insert the resource CD into a computer that is connected to the switch. The Resource CD page displays.
2.Click the Install ProSAFE Plus Utility link and follow the prompts to install the program.
The utility is installed in the program directory of your computer and a ProSAFE Plus Utility icon is placed on your desktop.
3.If prompted, allow WinPcap and Adobe Air to be installed.
Note: We recommend that you reboot your computer after installing the ProSAFE Plus Utility.
Access the Switch Using the ProSAFE Plus Utility
For easiest access, we recommend that you cable the switch to a network with a router or DHCP server that assigns IP addresses, power on the switch, and then use a computer that is connected to the same network as the switch.
By default, the switch management mode allows management through the ProSAFE Plus Utility. For more information, see Change the Switch Management Mode on page 45.
Note: You can also access and configure the switch directly using a web browser. See Access the Switch Using a Web Browser on page 6.
To configure the switch using the ProSAFE Plus Utility:
1.Cable the switch to a network with a router or DHCP server that manages IP address.
2.Power on the switch.
The DHCP server assigns the switch an IP address.
3.Connect your computer to the same network as the switch.
You can use a WiFi or wired connection. The computer and the switch must be on the same Layer 2 network.
4.Double-click the ProSAFE Plus Utility icon.
The configuration home page displays a list of Web Managed (Plus) Switches that it discovers on the local network.
Note: To use the ProSAFE Plus Utility, you must configure your computer’s security software to allow broadcast UDP packets to go through UDP remote and source (local and destination) ports 63321 through 63324. To allow this traffic, you can create a rule in your computer’s security
Getting Started
8
ProSAFE Easy-Mount 8-Port Gigabit Ethernet PoE+ Web Managed Switch
software, or temporarily disable the firewall, Internet security, antivirus programs, or all of these on the computer that you use to configure the switch. If you temporarily disable any security services, be sure to reenable those services once configuration is complete.
5.Select the ProSAFE Easy-Mount Switch that you want to configure. If you do not see the switch, click the REFRESH button.
6.When prompted, enter the password. The default password is password. The Switch Information page displays.
7.Use the utility to configure the switch settings.
8.When you are finished with the configuration, return the computer’s firewall, Internet security, and antivirus programs to their usual settings.
For a description of Web Managed (Plus) features, see the ProSAFE Plus Switch Utility User Guide. You can access the user guide through links on the Help tab of the utility and from the resource CD.
Change the Password
The default password to access the switch is password. We recommend that you change this password to a more secure password. The ideal password contains no dictionary words from any language and contains uppercase and lowercase letters, numbers, and symbols. It can be up to 20 characters.
To change the password:
1.Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is off-network using an Ethernet cable.
2.Launch a web browser.
3.In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Access the Switch Using a Web Browser on page 6.
The login window opens.
4.Enter the switch’s password in the password field. The switch’s default password is password.
The Switch Information page displays.
5.Select Maintenance > Change Password. The Change Password page displays.
Getting Started
9
ProSAFE Easy-Mount 8-Port Gigabit Ethernet PoE+ Web Managed Switch
6.In the Old Password field, type the current password for the switch.
7.Type the new password in the New Password field and in the Re-type New Password field.
8.Click the Apply button.
Your settings are saved. Keep the new password in a secure location so that you can access the switch in the future.
Getting Started
10
2. Network Settings |
2 |
|
|
||
|
|
|
This chapter covers the following topics:
•Specify IP Address Settings for the Switch
•Manage Multicast Traffic With IGMP Snooping
•Set Up Link Aggregation Groups
11
ProSAFE Easy-Mount 8-Port Gigabit Ethernet PoE+ Web Managed Switch
Specify IP Address Settings for the Switch
By default, the switch IP address works as follows:
•If you cable the switch to a network with a DHCP server before you power on the switch, the DHCP server assigns an IP address to the switch when the switch is powered on.
•If you power on the switch when it is not connected to a network with a DHCP server, the switch uses its default IP address, which is 192.168.0.239.
You can disable the DHCP mode feature in the switch and enter IP address and subnet mask values for the switch as well as the address of the gateway device used by the switch.
Use Browser-Based Access to Specify the Switch IP Address
To specify IP address settings for the switch:
1.Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is off-network using an Ethernet cable.
2.Launch a web browser.
3.In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Access the Switch Using a Web Browser on page 6.
The login window opens.
4.Enter the switch’s password in the password field. The switch’s default password is password.
The Switch Information page displays.
5.In the DHCP Mode menu, select Disable.
The IP Address, Subnet Mask, and Gateway Address fields are enabled.
Network Settings
12
ProSAFE Easy-Mount 8-Port Gigabit Ethernet PoE+ Web Managed Switch
6.Enter the IP address, subnet mask, and if available, the gateway address.
7.Click the Apply button. Your settings are saved.
Use the ProSAFE Plus Utility to Specify the Switch IP Address
To specify IP address settings for a switch:
1.Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is off-network using an Ethernet cable.
2.Double-click the ProSAFE Plus Utility icon.
The Switch Selection page displays a list of Web Managed (Plus) switches that it discovers on the local network.
3.Select the switch.
If you do not see the switch, click the REFRESH button.
4.Click the IP Setting button. The IP Setting page displays.
Note: To navigate to this page, select Network, select the switch, and click the IP Setting button.
5.In the DHCP Mode menu, select Disable.
The IP Address, Subnet Mask, and Gateway Address fields are enabled.
6.Enter the IP address, subnet mask, and if available, the gateway address.
7.Enter the switch’s password in the Password field.
Network Settings
13
ProSAFE Easy-Mount 8-Port Gigabit Ethernet PoE+ Web Managed Switch
The switch’s default password is password.
8.Click the APPLY button. Your settings are saved.
Manage Multicast Traffic With IGMP Snooping
Internet Group Management Protocol (IGMP) snooping allows a switch to forward multicast traffic intelligently on the switch. Multicast IP traffic is traffic that is destined to a host group. Host groups are identified by Class D IP addresses, which range from 224.0.0.0 to 239.255.255.255. Based on the IGMP query and report messages, the switch forwards traffic only to the ports that request the multicast traffic. This feature prevents the switch from broadcasting the traffic to all ports and possibly affecting network performance.
The switch maintains a map that shows which links need which IP multicast streams. The switch forwards multicast traffic only to the links that requested them and cuts multicast traffic from links that do not contain a multicast listener. Essentially, IGMP snooping helps optimize multicast performance at Layer 2 and is especially useful for bandwidth-intensive IP multicast applications such as IPTV.
Customize IGMP Snooping
By default, IGMP snooping is enabled. You can customize the settings for your network.
To customize IGMP snooping:
1.Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is off-network using an Ethernet cable.
2.Launch a web browser.
3.In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Access the Switch Using a Web Browser on page 6.
The login window opens.
4.Enter the switch’s password in the password field. The switch’s default password is password.
The Switch Information page displays.
5.Select System > Multicast.
Network Settings
14
ProSAFE Easy-Mount 8-Port Gigabit Ethernet PoE+ Web Managed Switch
6.Make sure that the IGMP Snooping Status Enable radio button is selected. By default, the Enable radio button is selected.
7.(Optional) Select the Validate IGMPv3 IP header Enable radio button.
Some network devices might not conform to the IGMPv3 standard. When the Validate IGMPv3 IP header option is enabled, IGMP messages are required to include TTL = 1 and ToS Byte = 0xC0 (Internetwork Control), and the router alert IP option (9404) must be set. Otherwise, the packets are ignored.
8.(Optional) Select the Block Unknown MultiCast Address Enable radio button.
When this feature is enabled, multicast packets are forwarded only to the ports that are in the multicast group learned from IGMP snooping. All unknown multicast packets are dropped.
9.(Optional) Select any item in the IGMP Snooping Static Router Port menu.
You can select a port to be the dedicated IGMP snooping static router port if no IGMP query exists in the network for the switch to discover the router port dynamically. After a port is selected as the static router port, all IGMP Join and Leave reports are forwarded to this port.
10.Click the Apply button. Your settings are saved.
Specify a VLAN for IGMP Snooping
To specify a VLAN for IGMP snooping:
1.Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is off-network using an Ethernet cable.
2.Launch a web browser.
3.In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Access the Switch Using a Web Browser on page 6.
The login window opens.
Network Settings
15
ProSAFE Easy-Mount 8-Port Gigabit Ethernet PoE+ Web Managed Switch
4.Enter the switch’s password in the password field. The switch’s default password is password.
The Switch Information page displays.
5.Select System > Multicast.
6.Make sure that the IGMP Snooping Status Enable radio button is selected. By default, the Enable radio button is selected.
7.In the VLAN ID Enabled for IGMP Snooping field, enter the ID of the VLAN.
By default, if you enable IGMP snooping, snooping occurs on VLAN 1. However, you can enable snooping on any VLAN as follows:
•For port-based VLANs, you can enter a VLAN ID from 1 to 8.
•For 802.1Q-based VLANs, you can enter a VLAN ID from 1 to 4094.
8.Click the Apply button. Your settings are saved.
Set Up Link Aggregation Groups
Link aggregation groups (LAGs) allow you to combine multiple Ethernet links into a single logical link. Network devices treat the aggregation as if it were a single link, which increases fault tolerance and load sharing. Specify LAG membership before you enable the LAG. The switch supports up to two static LAGs.
To specify LAG membership and enable one or both LAGs:
1.Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is off-network using an Ethernet cable.
2.Launch a web browser.
3.In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Access the Switch Using a Web Browser on page 6.
Network Settings
16
ProSAFE Easy-Mount 8-Port Gigabit Ethernet PoE+ Web Managed Switch
The login window opens.
4.Enter the switch’s password in the password field. The switch’s default password is password.
The Switch Information page displays.
5.Select System > LAG > LAG Membership.
6.For each LAG, select the ports for the LAG by selecting the associated check boxes under the port numbers.
A LAG must consist of at least two ports. For LAG 1, you can select a combination of ports 1 through 4. For LAG 2, you can select a combination of ports 5 through 8.
7.Click the Apply button. Your settings are saved.
8.Select System > LAG > LAG Configuration.
9.Select the ID of the LAG for which you just set up the port membership or select both LAG IDs.
10.In the Admin Mode menu, select Enable.
11.Click the Apply button. Your settings are saved.
Network Settings
17
3. Optimize Performance With |
3 |
|
|
||
|
Quality of Service |
|
|
|
|
This chapter covers the following topics:
•Enable 802.1p/DSCP-Based Quality of Service
•Enable Port-Based Quality of Service
•Set Up Rate Limiting
•Set Up Broadcast Filtering
18
ProSAFE Easy-Mount 8-Port Gigabit Ethernet PoE+ Web Managed Switch
Enable 802.1p/DSCP-Based Quality of Service
802.1p/DSCP-based priority uses a field in the data packet header that identifies the class of data in the packet (for example, voice or video). When 802.1p/DSCP-based priority is used, the switch reads information in the packet header to determine the priority to assign to the packet. The switch reads both 802.1p tag information and DSCP and ToS tag information. If an ingress packet contains an 802.1p tag and a DSCP or ToS tag, the switch gives precedence to the 802.1p tag.
All ports on the switch check the packet header and transmit the packet with a priority determined by the packet content.
To enable 802.1p/DSCP-based QoS:
1.Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is off-network using an Ethernet cable.
2.Launch a web browser.
3.In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Access the Switch Using a Web Browser on page 6.
The login window opens.
4.Enter the switch’s password in the password field. The switch’s default password is password.
The Switch Information page displays.
5.Select QoS.
The Quality of Service page displays.
6.Select the 802.1p/DSCP-based radio button.
A pop-up window opens, informing you that the current QoS settings will be lost.
7.Click the YES button.
The pop-up window closes.
8.Click the Apply button. Your settings are saved.
Optimize Performance With Quality of Service
19
ProSAFE Easy-Mount 8-Port Gigabit Ethernet PoE+ Web Managed Switch
Enable Port-Based Quality of Service
You can assign a priority to all data passing through a particular port. Data with a higher priority is transmitted faster. If packets arrive at several ports at the same time, the ports configured as higher priority transmit their packets first. You must determine which ports will carry delay-sensitive data.
To enable port-based QoS:
1.Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is off-network using an Ethernet cable.
2.Launch a web browser.
3.In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Access the Switch Using a Web Browser on page 6.
The login window opens.
4.Enter the switch’s password in the password field. The switch’s default password is password.
The Switch Information page displays.
5.Select QoS.
The Quality of Service page displays.
6.If this is the first time that you are setting up port-based QoS, select the Port-based radio button and continue with Step 7.
Otherwise, see Step 9.
A pop-up window opens, informing you that the current QoS settings will be lost.
7.Click the YES button.
The pop-up window closes.
8.Click the Apply button.
Your settings are saved and the Port Priority table displays.
Optimize Performance With Quality of Service
20
ProSAFE Easy-Mount 8-Port Gigabit Ethernet PoE+ Web Managed Switch
9.To set the port priority for one or more ports, do the following:
a.Select one or more ports.
b.In the Priority menu, select the priority.
The options are High Priority, Medium Priority, Normal Priority, and Low Priority. The default setting is Low Priority.
c.Click the Apply button.
Your settings are saved. The same priority is applied to all ports that you selected.
10.To set a different port priority for one or more other ports, repeat Step 9.
Set Up Rate Limiting
You can limit the rate at which the switch accepts incoming data and the rate that it retransmits outgoing data.
Rate limiting can be set for a port in addition to other QoS settings. If the port rate limit is set, the switch restricts the acceptance or retransmission of data to the values configured.
To set up rate limiting:
1.Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is off-network using an Ethernet cable.
2.Launch a web browser.
3.In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Access the Switch Using a Web Browser on page 6.
The login window opens.
4.Enter the switch’s password in the password field.
Optimize Performance With Quality of Service
21
Loading...