Loading...
ProSAFE® Gigabit Web Managed
(Plus) Switches
User Manual
GS105Ev2
GS105PE
GS108Ev3
GS108PEv3
GS116Ev2
JGS516PE
JGS524Ev2
JGS524PE
March 2017 202-11700-02
350 East Plumeria Drive
San Jose, CA 95134
USA
ProSAFE Gigabit Web Managed (Plus) Switches
Support
Thank you for purchasing this NETGEAR product. You can visit www.netgear.com/support to register your product, get help, access the latest downloads and user manuals, and join our community. We recommend that you use only official NETGEAR support resources.
Conformity
For the current EU Declaration of Conformity, visit http://kb.netgear.com/app/answers/detail/a_id/11621.
Compliance
For regulatory compliance information, visit http://www.netgear.com/about/regulatory.
See the regulatory compliance document before connecting the power supply.
Trademarks
© NETGEAR, Inc., NETGEAR, and the NETGEAR Logo are trademarks of NETGEAR, Inc. Any non-NETGEAR trademarks are used for reference purposes only.
Revision History
Publication Part Number |
Publish Date |
Comments |
|
|
|
202-11700-02 |
March 2017 |
Made corrections to Specify a Port PVID for an 802.1Q-Based VLAN. |
|
|
|
202-11700-01 |
August 2016 |
First publication. |
|
|
|
2
Contents
Chapter 1 Get Started
Supported Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Configure the Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Access the Switch Using a Web Browser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Access a Switch That Is Off-Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Access a Switch That Is Connected to a Network . . . . . . . . . . . . . . . . . . . . . . . 8 Access the Switch With the ProSAFE Plus Configuration Utility . . . . . . . . . . . . . 9 Install the ProSAFE Plus Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Access and Configure the Switch Using the ProSAFE Plus Utility . . . . . . . . . . 9 Change the Password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Use Browser-Based Access to Change the Password . . . . . . . . . . . . . . . . . . . 11 Use the ProSAFE Plus Utility to Change the Password . . . . . . . . . . . . . . . . . . 11
Chapter 2 Manage Network Settings
Specify IP Address Settings for the Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Use Browser-Based Access to Specify the Switch IP Address. . . . . . . . . . . . 14 Use the ProSAFE Plus Utility to Specify the Switch IP Address . . . . . . . . . . . 15 Manage Multicast Traffic With IGMP Snooping . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Use Browser-Based Access to Customize IGMP Snooping. . . . . . . . . . . . . . . 16 Use the ProSAFE Plus Utility to Customize IGMP Snooping . . . . . . . . . . . . . . 17 Use Browser-Based Access to Specify a VLAN for IGMP Snooping . . . . . . . 19 Use the ProSAFE Plus Utility to Specify a VLAN for IGMP Snooping . . . . . . 20 Set Up Static Link Aggregation Groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Use Browser-Based Access to Specify LAG Membership and
Enable LAGs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Use the ProSAFE Plus Utility Specify LAG Membership and
Enable LAGs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Chapter 3 Optimize Performance With Quality of Service
Enable 802.1p/DSCP-Based Quality of Service . . . . . . . . . . . . . . . . . . . . . . . . . 26 Use Browser-Based Access to Enable 802.1p/DSCP-Based QoS . . . . . . . . 26 Use the ProSAFE Plus Utility to Enable 802.1p/DSCP-Based QoS. . . . . . . . 27 Configure Port-Based Quality of Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Use Browser-Based Access to Configure Port-Based QoS . . . . . . . . . . . . . . 28 Use the ProSAFE Plus Utility to Configure Port-Based QoS. . . . . . . . . . . . . . 29 Set Up Rate Limiting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Use Browser-Based Access to Set Up Rate Limiting . . . . . . . . . . . . . . . . . . . . 31 Use the ProSAFE Plus Utility to Set Up Rate Limiting . . . . . . . . . . . . . . . . . . . 32 Set Up Broadcast Filtering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
3
ProSAFE Gigabit Web Managed (Plus) Switches
Use Browser-Based Access to Set Up Broadcast Filtering . . . . . . . . . . . . . . . 33 Use the ProSAFE Plus Utility to Set Up Broadcast Filtering . . . . . . . . . . . . . . 34
Chapter 4 Use VLANS for Traffic Segmentation
VLAN Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Create Basic Port-Based VLANs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Use Browser-Based Access to Create Basic Port-Based VLANs . . . . . . . . . . 37 Use the ProSAFE Plus Utility to Create Basic Port-Based VLANs . . . . . . . . . 38 Assign Ports to Multiple Port-Based VLANs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Use Browser-Based Access to Assign Ports to Multiple
Port-Based VLANs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Use the ProSAFE Plus Utility to Assign Ports to Multiple
Port-Based VLANs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Create 802.1Q-Based VLANs in a Basic Configuration. . . . . . . . . . . . . . . . . . . . 43
Use Browser-Based Access to Create 802.1Q-Based VLANs
in a Basic Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 Use the ProSAFE Plus Utility to Create 802.1Q-Based VLANs
in a Basic Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 Create 802.1Q-Based VLANs in an Advanced Configuration . . . . . . . . . . . . . . 46
Use Browser-Based Access to Create 802.1Q-Based VLANs in
an Advanced Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 Use the ProSAFE Plus Utility to Create 802.1Q-Based VLANs in
an Advanced Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 Add Tagged or Untagged Ports to an 802.1Q-Based VLAN. . . . . . . . . . . . . . . . 49
Use Browser-Based Access to Add Tagged or Untagged Ports
to an 802.1Q-Based VLAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 Use the ProSAFE Plus Utility to Add Tagged or Untagged
Ports to an 802.1Q-Based VLAN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 Specify a Port PVID for an 802.1Q-Based VLAN . . . . . . . . . . . . . . . . . . . . . . . . 51 Use Browser-Based Access to Assign a PVID to Ports . . . . . . . . . . . . . . . . . . 52 Use the ProSAFE Plus Utility to Assign a PVID to Ports. . . . . . . . . . . . . . . . . . 53
Chapter 5 Manage and Monitor the Switch
Manage Flow Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 Use Browser-Based Access to Manage Flow Control . . . . . . . . . . . . . . . . . . . 55 Use the ProSAFE Plus Utility to Manage Flow Control . . . . . . . . . . . . . . . . . . 56 Manage the Port Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Use Browser-Based Access to Specify the Port Speed or Shut
Down a Port. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 Use the ProSAFE Plus Utility to Specify the Port Speed or Shut
Down a Port. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 Enable Loop Detection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 Use Browser-Based Access to Enable Loop Detection . . . . . . . . . . . . . . . . . . 59 Use the ProSAFE Plus Utility to Enable Loop Detection . . . . . . . . . . . . . . . . . 60 Manage Power Saving Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 Use Browser-Based Access to Enable Power Saving Mode . . . . . . . . . . . . . . 61 Use the ProSAFE Plus Utility to Enable Power Saving Mode . . . . . . . . . . . . . 62
4
ProSAFE Gigabit Web Managed (Plus) Switches
Upgrade the Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 Use Browser-Based Access to Upgrade the Firmware . . . . . . . . . . . . . . . . . . 63 Use the ProSAFE Plus Utility to Upgrade the Firmware. . . . . . . . . . . . . . . . . . 64 Reboot the Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 Use Browser-Based Access to Reboot the Switch . . . . . . . . . . . . . . . . . . . . . . 65 Use the ProSAFE Plus Utility to Reboot the Switch . . . . . . . . . . . . . . . . . . . . . 66 Save the Switch Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 Use Browser-Based Access to Save the Switch Configuration . . . . . . . . . . . 67 Use the ProSAFE Plus Utility to Save the Switch Configuration. . . . . . . . . . . 67 Restore a Saved Switch Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 Use Browser-Based Access to Restore a Saved Switch Configuration . . . . . 68 Use the ProSAFE Plus Utility to Restore a Saved Switch Configuration . . . . 69 Restore Factory Default Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 Use Browser-Based Access to Restore Factory Settings . . . . . . . . . . . . . . . . 69 Use the ProSAFE Plus Utility to Restore Factory Settings. . . . . . . . . . . . . . . . 70 Enable Port Mirroring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 Use Browser-Based Access to Enable Port Mirroring . . . . . . . . . . . . . . . . . . . 71 Use the ProSAFE Plus Utility to Enable Port Mirroring . . . . . . . . . . . . . . . . . . 72 View Switch Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 Use Browser-Based Access to View Switch Information . . . . . . . . . . . . . . . . 73 Use the ProSAFE Plus Utility to View Switch Information. . . . . . . . . . . . . . . . 74 View the Port Statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 Use Browser-Based Access to View and Clear the Port Statistics. . . . . . . . . 75 Use the ProSAFE Plus Utility to View and Clear the Port Statistics . . . . . . . . 76
Chapter 6 Diagnostics and Troubleshooting
Use Browser-Based Access to Register Your Product . . . . . . . . . . . . . . . . . . . . . 78 Test Cable Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 Use Browser-Based Access to Test a Cable Connection . . . . . . . . . . . . . . . . . 79 Use the ProSAFE Plus Utility to Test a Cable Connection . . . . . . . . . . . . . . . . 79 Resolve a Subnet Conflict to Access the Switch . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Appendix A Factory Default Settings
5
1. Get Started |
1 |
|
|
||
|
|
|
This chapter covers the following topics:
•Supported Switches
•Configure the Switch
•Access the Switch Using a Web Browser
•Access the Switch With the ProSAFE Plus Configuration Utility
•Change the Password
Note: For hardware information, see the hardware installation guide (HIG) for your switch model. You can download the HIG by visiting downloadcenter.netgear.com.
Note: For more information about the topics covered in this manual, visit the support website at netgear.com/support.
Note: Firmware updates with new features and bug fixes are made available from time to time at downloadcenter.netgear.com. You can check for and download new firmware manually. If the features or behavior of your product does not match what is described in this guide, see the latest firmware release notes for your switch model.
6
ProSAFE Gigabit Web Managed (Plus) Switches
Supported Switches
The ProSAFE Gigabit Web Managed (Plus) Switch Series User Manual supports the following switch models:
•GS105Ev2
•GS105PE
•GS108Ev3
•GS108PEv3
•GS116Ev2
•JGS516PE
•JGS524Ev2
•JGS524PE
Configure the Switch
ProSAFE Web Managed (Plus) Switches are Plug-and-Play, so they can be used without any configuration. Just connect power, connect to your network and to your other devices, and you’re done. You can also configure and manage additional advanced features of the switch either by using your computer’s web browser or by installing the ProSAFE Plus Utility on your Windows-based computer.
For easiest access, we recommend that you cable the switch to a network with a router or DHCP server that assigns IP addresses, power on the switch, and then use a computer that is connected to the same network as the switch (on-network). However, it is also possible to configure the switch connected directly only to the computer that you are using to configure it, and not connected to the network (off-network). See the following sections for details about the different options for configuring your switch.
Access the Switch Using a Web Browser
You can access and configure the switch directly through its web-based management interface by entering the switch’s IP address in the address bar of a browser. When using web-browser setup, the simplest way to configure the switch is not connected to your network (off-network). You can also configure the switch with it connected to your network, router, or modem, (on-network) but you must be able to determine the IP address of the switch if your network uses DHCP.
Get Started
7
ProSAFE Gigabit Web Managed (Plus) Switches
Access a Switch That Is Off-Network
To use your web browser to configure a switch that is not connected to a network:
1.Record your computer’s TCP/IP configuration settings, and then configure the computer with a static IP address of 192.168.0.210 and 255.255.255.0 as the subnet mask.
Note: If you are unsure how to do this, visit the support website at netgear.com/support and search for Static IP address on computer.
2.Plug the switch into a power outlet and then connect your computer to the switch using an Ethernet cable.
You can connect the Ethernet cable to any port on the switch.
3.Open a web browser, and enter http://192.168.0.239. This is the default address of the switch.
4.When prompted, enter the password. The default password is password.
5.Click the Login button.
You can now configure additional options for the switch in the web browser interface.
6.After you complete the configuration of the switch, reconfigure the computer that you used for this process to its original TCP/IP settings.
You can now connect your switch to your network using an Ethernet cable.
Access a Switch That Is Connected to a Network
To use your web browser to configure a switch that is connected to a network:
1.Cable the switch to a network with a router or DHCP server that manages IP addresses.
2.Power on the switch.
The DHCP server assigns the switch an IP address.
3.Connect your computer to the same network as the switch.
4.Determine the IP address of the switch.
DHCP is enabled on the switch by default. Use the IP address that the DHCP server assigned to the switch. If you are unsure how to determine the IP address of the switch, you can use the ProSAFE Plus Configuration Utility or an IP scanner utility.
5.Open a web browser, and enter the IP address of the switch.
6.When prompted, enter the password. The default password is password.
7.Click the Login button.
You can now configure additional options for the switch in the web browser interface.
Get Started
8
ProSAFE Gigabit Web Managed (Plus) Switches
Access the Switch With the ProSAFE Plus Configuration
Utility
The ProSAFE Plus configuration utility runs on Windows-based computers. You can install the utility to select additional options to manage and customize the switch for your network. The utility is located on the resource CD that came with the switch. You can also visit netgear.com/support/product/PCU to download the utility.
Install the ProSAFE Plus Utility
Note: The ProSAFE Plus Utility requires WinPcap and Adobe Air. If WinPcap and Adobe Air are not detected during ProSAFE Plus Utility installation, you are prompted to allow them be installed.
To install the utility from the resource CD:
1.Insert the resource CD into a computer that is connected to the switch. The Resource CD page displays.
2.Click the Install ProSAFE Plus Utility link and follow the prompts to install the program.
The utility is installed in the program directory of your computer and a ProSAFE Plus Utility icon is placed on your desktop.
3.If prompted, allow WinPcap and Adobe Air to be installed.
Note: We recommend that you reboot your computer after installing the
ProSAFE Plus Utility.
Access and Configure the Switch Using the ProSAFE Plus Utility
For easiest access, we recommend that you cable the switch to a network with a router or DHCP server that assigns IP addresses, power on the switch, and then use a computer that is connected to the same network as the switch.
Note: You can also access and configure the switch directly using a web browser. See Access the Switch Using a Web Browser on page 7.
Get Started
9
ProSAFE Gigabit Web Managed (Plus) Switches
To access and configure the switch using the ProSAFE Plus Utility:
1.Cable the switch to a network with a router or DHCP server that manages IP address.
2.Power on the switch.
The DHCP server assigns the switch an IP address.
3.Connect your computer to the same network as the switch.
You can use a WiFi or wired connection. The computer and the switch must be on the same Layer 2 network.
4.Double-click the ProSAFE Plus Utility icon.
The Switch Selection page displays a list of Web Managed (Plus) switches that it discovers on the local network.
Note: To use the ProSAFE Plus Utility, make sure that your computer’s security software allows broadcast of UDP packets to go through UDP remote and source (local and destination) ports 63321 through 63324. To allow this traffic, you can create a rule in your computer’s security software, or temporarily disable the firewall, Internet security, antivirus programs, or all on the computer that you use to configure the switch. If you temporarily disable any security services, be sure to reenable those services once configuration is complete.
5.Select the ProSAFE Web Managed (Plus) switch that you want to configure. If you do not see the switch, click the REFRESH button.
6.When prompted, enter the password. The default password is password. The Switch Information page displays.
7.Use the utility to configure the switch settings.
8.If you temporarily disabled the firewall, Internet security, antivirus programs, or all of these programs, return them to their usual settings when you are finished with the configuration.
For a description of Web Managed (Plus) features, see the ProSAFE Plus Switch Utility User Guide. You can access the user guide through links on the Help tab of the utility and from the resource CD.
Change the Password
The default password to access the switch is password. We recommend that you change this password to a more secure password. The ideal password contains no dictionary words from any language and contains uppercase and lowercase letters, numbers, and symbols. It can be up to 20 characters.
Get Started
10
ProSAFE Gigabit Web Managed (Plus) Switches
Use Browser-Based Access to Change the Password
To change the password:
1.Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is off-network using an Ethernet cable.
2.Launch a web browser.
3.In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Access the Switch Using a Web Browser on page 7.
The login window opens.
4.Enter the switch’s password in the password field. The switch’s default password is password.
The Switch Information page displays.
5.Select Maintenance > Change Password. The Change Password page displays.
6.In the Old Password field, type the current password for the switch.
7.Type the new password in the New Password field and in the Re-type New Password field.
8.Click the Apply button.
Your settings are saved. Keep the new password in a secure location so that you can access the switch in the future.
Use the ProSAFE Plus Utility to Change the Password
To change the password:
1.Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is off-network using an Ethernet cable.
2.Double-click the ProSAFE Plus Utility icon.
The Switch Selection page displays a list of Web Managed (Plus) switches that it discovers on the local network.
3.Select the switch.
If you do not see the switch, click the REFRESH button.
4.Click the APPLY button.
You are asked to enter the password for the switch.
Get Started
11
ProSAFE Gigabit Web Managed (Plus) Switches
5.Enter the switch’s password in the password field. The switch’s default password is password.
The Switch Status page displays.
6.Select System > Maintenance > Change Password. The Change Password page displays.
7.In the Old Password field, type the current password for the switch.
8.Type the new password in the New Password field and in the Re-type New Password field.
9.Click the APPLY button.
Your settings are saved. Keep the new password in a secure location so that you can access the switch in the future.
Get Started
12
2. Manage Network Settings |
2 |
|
|
||
|
|
|
This chapter covers the following topics:
•Specify IP Address Settings for the Switch
•Manage Multicast Traffic With IGMP Snooping
•Set Up Static Link Aggregation Groups
13
ProSAFE Gigabit Web Managed (Plus) Switches
Specify IP Address Settings for the Switch
By default, the switch IP address works as follows:
•If you cable the switch to a network with a DHCP server before you power on the switch, the DHCP server assigns an IP address to the switch when the switch is powered on.
•If you power on the switch when it is not connected to a network with a DHCP server, the switch uses its default IP address, which is 192.168.0.239.
You can disable the DHCP mode in the switch and enter static IP address and subnet mask values for the switch as well as the address of the gateway device used by the switch.
Use Browser-Based Access to Specify the Switch IP Address
To specify IP address settings for the switch:
1.Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is off-network using an Ethernet cable.
2.Launch a web browser.
3.In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Access the Switch Using a Web Browser on page 7.
The login window opens.
4.Enter the switch’s password in the password field. The switch’s default password is password.
The Switch Information page displays.
5.In the DHCP Mode menu, select Disable.
Manage Network Settings
14
ProSAFE Gigabit Web Managed (Plus) Switches
The IP Address, Subnet Mask, and Gateway Address fields are enabled.
6.Enter the IP address, subnet mask, and if available, the gateway address.
7.Click the Apply button. Your settings are saved.
Use the ProSAFE Plus Utility to Specify the Switch IP Address
To specify IP address settings for a switch:
1.Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is off-network using an Ethernet cable.
2.Double-click the ProSAFE Plus Utility icon.
The Switch Selection page displays a list of Web Managed (Plus) switches that it discovers on the local network.
3.Select the switch.
If you do not see the switch, click the REFRESH button.
4.Click the IP SETTING button.
Note: To navigate to this page, select Network, select the switch, and click the IP SETTING button.
5.In the DHCP Mode menu, select Disable.
The IP Address, Subnet Mask, and Gateway Address fields are enabled.
6.Enter the IP address, subnet mask, and if available, the gateway address.
7.Enter the switch’s password in the Password field. The switch’s default password is password.
8.Click the APPLY button. Your settings are saved.
Manage Network Settings
15
ProSAFE Gigabit Web Managed (Plus) Switches
Manage Multicast Traffic With IGMP Snooping
Internet Group Management Protocol (IGMP) snooping allows a switch to forward multicast traffic intelligently on the switch. Multicast IP traffic is traffic that is destined to a host group. Host groups are identified by class D IP addresses, which range from 224.0.0.0 to 239.255.255.255. Based on the IGMP query and report messages, the switch forwards traffic only to the ports that request the multicast traffic. This feature prevents the switch from broadcasting the traffic to all ports and possibly affecting network performance.
The switch maintains a map that shows which links need which IP multicast streams. The switch forwards multicast traffic only to the links that requested them and cuts multicast traffic from links that do not contain a multicast listener. Essentially, IGMP snooping helps optimize multicast performance at Layer 2 and is especially useful for bandwidth-intensive IP multicast applications such as IPTV.
Use Browser-Based Access to Customize IGMP Snooping
By default, IGMP snooping is enabled. You can customize the settings for your network.
To customize IGMP snooping:
1.Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is off-network using an Ethernet cable.
2.Launch a web browser.
3.In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Access the Switch Using a Web Browser on page 7.
The login window opens.
4.Enter the switch’s password in the password field. The switch’s default password is password.
The Switch Information page displays.
5.Select System > Multicast.
Manage Network Settings
16
ProSAFE Gigabit Web Managed (Plus) Switches
6.Make sure that the IGMP Snooping Status Enable radio button is selected. By default, the Enable radio button is selected.
7.Make sure that a VLAN ID between 1 and 4094 is stated in the VLAN ID Enabled for IGMP Snooping field.
IGMP snooping functions only on the VLAN that is specified in the VLAN ID Enabled for IGMP Snooping field.
8.(Optional) Select the Validate IGMPv3 IP header Enable radio button.
Some network devices might not conform to the IGMPv3 standard. When the Validate IGMPv3 IP header option is enabled, IGMP messages are required to include TTL = 1, ToS Byte = 0xC0 (Internetwork Control), and the router alert IP option (9404) must be set. Otherwise, the packets are ignored.
9.(Optional) Select the Block Unknown MultiCast Address Enable radio button.
When this feature is enabled, multicast packets are forwarded only to the ports that are in the multicast group learned from IGMP snooping. All unknown multicast packets are dropped.
10.(Optional, for some models only) Select an option from the IGMP Snooping Static Router Port menu.
You can select a port to be the dedicated IGMP snooping static router port if no IGMP query exists in the network for the switch to discover the router port dynamically. After a port is selected as the static router port, all IGMP Join and Leave reports are forwarded to the port.
11.Click the Apply button. Your settings are saved.
Use the ProSAFE Plus Utility to Customize IGMP Snooping
By default, IGMP snooping is enabled. You can customize the settings for your network.
To customize IGMP snooping:
1.Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is off-network using an Ethernet cable.
2.Double-click the ProSAFE Plus Utility icon.
The Switch Selection page displays a list of Web Managed (Plus) switches that it discovers on the local network.
3.Select the switch.
If you do not see the switch, click the REFRESH button.
4.Click the APPLY button.
You are asked to enter the password for the switch.
Manage Network Settings
17
ProSAFE Gigabit Web Managed (Plus) Switches
5.Enter the switch’s password in the password field. The switch’s default password is password.
The Switch Status page displays.
6.Select System > Multicast.
7.Select the IGMP Snooping Status Enable radio button.
8.(Optional) Select the Validate IGMPv3 IP header Enable radio button.
Some network devices might not conform to the IGMPv3 standard. When the Validate IGMPv3 IP header option is enabled, IGMP messages are required to include TTL = 1, ToS Byte = 0xC0 (Internetwork Control), and the router alert IP option (9404) must be set. Otherwise, the packets are ignored.
9.(Optional) Select the Block Unknown MultiCast Address Enable radio button.
When this feature is enabled, multicast packets are forwarded only to the ports that are in the multicast group learned from IGMP snooping. All unknown multicast packets are dropped.
10.(Optional, for some models only) Select an option from the IGMP Snooping Static Router Port menu.
You can select a port to be the dedicated IGMP snooping static router port if no IGMP query exists in the network for the switch to discover the router port dynamically. After a port is selected as the static router port, all IGMP Join and Leave reports are forwarded to the port.
11.Click the APPLY button. Your settings are saved.
Manage Network Settings
18
ProSAFE Gigabit Web Managed (Plus) Switches
Use Browser-Based Access to Specify a VLAN for IGMP Snooping
You can specify a VLAN for IGMP snooping only if you enabled port-based or 802.1Q-based VLANs (see Chapter 4, Use VLANS for Traffic Segmentation).
To specify a VLAN for IGMP snooping:
1.Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is off-network using an Ethernet cable.
2.Launch a web browser.
3.In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Access the Switch Using a Web Browser on page 7.
The login window opens.
4.Enter the switch’s password in the password field. The switch’s default password is password.
The Switch Information page displays.
5.Select System > Multicast.
6.Make sure that the IGMP Snooping Status Enable radio button is selected.
7.In the VLAN ID Enabled for IGMP Snooping field, enter the ID of the VLAN.
By default, if you enable IGMP snooping, snooping occurs on VLAN 1. However, you can enable snooping on any VLAN:
•For port-based VLANs, you can enter a VLAN ID from 1 to the maximum number that you switch supports (5, 8, 16, or 24).
•For 802.1Q-based VLANs, you can enter a VLAN ID from 1 to 4094.
8.Click the Apply button. Your settings are saved.
Manage Network Settings
19
ProSAFE Gigabit Web Managed (Plus) Switches
Use the ProSAFE Plus Utility to Specify a VLAN for IGMP Snooping
You can specify a VLAN for IGMP snooping only if you enabled port-based or 802.1Q-based VLANs (see Chapter 4, Use VLANS for Traffic Segmentation).
To specify a VLAN for IGMP snooping:
1.Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is off-network using an Ethernet cable.
2.Double-click the ProSAFE Plus Utility icon.
The Switch Selection page displays a list of Web Managed (Plus) switches that it discovers on the local network.
3.Select the switch.
If you do not see the switch, click the REFRESH button.
4.Click the APPLY button.
You are asked to enter the password for the switch.
5.Enter the switch’s password in the password field. The switch’s default password is password.
The Switch Status page displays.
6.Select System > Multicast.
The previous figure is an example. Your switch might support more or less VLANs for IGMP snooping.
7.Make sure that the IGMP Snooping Status Enable radio button is selected.
8.In the VLAN ID Enabled for IGMP Snooping field, enter the ID of the VLAN.
Manage Network Settings
20
ProSAFE Gigabit Web Managed (Plus) Switches
By default, if you enable IGMP snooping, snooping occurs on VLAN 1. However, you can enable snooping on any VLAN:
•For port-based VLANs, you can enter a VLAN ID from 1 to the maximum number that you switch supports (5, 8, 16, or 24).
•For 802.1Q-based VLANs, you can enter a VLAN ID from 1 to 4094.
9.Click the APPLY button. Your settings are saved.
Set Up Static Link Aggregation Groups
Note: Static link aggregation (port trunking) is supported on models GS116E, JGS516PE, JGS524E, and JGS524PE.
Link aggregation groups (LAGs) allow you to combine multiple Ethernet links into a single logical link. Network devices treat the aggregation as if it were a single link, which increases fault tolerance and load sharing. The number of LAGs that the switch supports depends on the model. Configure LAG membership before you enable the LAG.
Note: The switch does not support IEEE 802.3ad Link Aggregation or Link Aggregation Control Protocol (LACP) groups. The switch supports manual static LAGs only.
Use Browser-Based Access to Specify LAG Membership and Enable LAGs
You must set up LAG membership before you can enable LAGs.
To specify LAG membership and enable a LAG:
1.Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is off-network using an Ethernet cable.
2.Launch a web browser.
3.In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Access the Switch Using a Web Browser on page 7.
The login window opens.
4.Enter the switch’s password in the password field.
Manage Network Settings
21
ProSAFE Gigabit Web Managed (Plus) Switches
The switch’s default password is password.
The Switch Information page displays.
5.Select System > LAG > LAG Membership.
The previous figure is an example. Your switch might provide a larger number of ports.
6.In the LAG ID menu, select the LAG ID.
The number of LAGs that the switch supports depends on the model.
7.Select the ports for the LAG by selecting the associated check boxes under the port numbers.
A LAG consists of at least two ports.
8.Click the Apply button. Your settings are saved.
9.Select System > LAG > LAG Configuration.
10.Select the ID of the LAG for which you just set up the port membership.
11.In the Admin Mode menu, select Enable.
12.Click the Apply button. Your settings are saved.
Manage Network Settings
22
ProSAFE Gigabit Web Managed (Plus) Switches
Use the ProSAFE Plus Utility Specify LAG Membership and Enable LAGs
You must set up LAG membership before you can enable LAGs.
To specify LAG membership and enable a LAG:
1.Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is off-network using an Ethernet cable.
2.Double-click the ProSAFE Plus Utility icon.
The Switch Selection page displays a list of Web Managed (Plus) switches that it discovers on the local network.
3.Select the switch.
If you do not see the switch, click the REFRESH button.
4.Click the APPLY button.
You are asked to enter the password for the switch.
5.Enter the switch’s password in the password field. The switch’s default password is password.
The Switch Status page displays.
6.Select System > LAG > LAG Membership.
The previous figure is an example. Your switch might provide a larger number of ports.
7.In the LAG ID menu, select the LAG ID.
The number of LAGs that the switch supports depends on the model.
8.Select the ports for the LAG by selecting the associated check boxes under the port numbers.
A LAG consists of at least two ports.
9.Click the APPLY button. Your settings are saved.
10.Select System > LAG.
Manage Network Settings
23
ProSAFE Gigabit Web Managed (Plus) Switches
11.Select the ID of the LAG for which you just set up the port membership.
12.In the Admin Mode menu, select Enable.
13.Click the APPLY button. Your settings are saved.
Manage Network Settings
24
3. Optimize Performance With |
3 |
|
|
||
|
Quality of Service |
|
|
|
|
This chapter covers the following topics:
•Enable 802.1p/DSCP-Based Quality of Service
•Configure Port-Based Quality of Service
•Set Up Rate Limiting
•Set Up Broadcast Filtering
25
Loading...