MD 8833
UK/ N. IRELAND HELPLINE 0871 3761020
REP. IRELAND HELPLINE 1-800-992508
Notes on this Manual
Keep these instructions with your computer at all times. The proper set up, use and care
can help extend the life of your computer. In the event that you transfer ownership of this
computer, please provide these instructions to the new owner.
This manual is divided into sections to help you locate the information you require. Along
with the Table of Contents at the beginning of this manual, an Index has been provided to
help you find topical information.
If you want to start up your PC immediately, please read the chapters Operational
Safety (page 3) and Setting up and Getting Started (page 8).
We strongly recommend you read this entire manual to ensure the proper set-up and
operation of your PC.
Many application programs incorporate extensive help functions. As a general rule, you
can access help functions by pressing F1 on the keyboard. These help functions will be
available to you while you are using the Microsoft Windows
®
operating system or the re-
spective application program.
Windows Vista
®
offers you additional aids to learn about the new version of Windows and
your PC. You can find this information in the Welcome Center after booting up your PC.
We have listed further useful sources of information starting on page 55.
Audience
These instructions are intended for both the novice and advanced user. Regardless of the
possible professional utilisation, this PC is designed for day-to-day household use. The
functions and applications for use with this PC have been designed with the entire family
in mind.
Purchase Details
Enter your purchase details below for quick reference.
Serial Numbers ......................................
(i.e. Microsoft
®
) ......................................
Place and date of Purchase ......................................
You will find the PC serial number on the rear of the PC. Also copy this number into your
guarantee documents, if necessary.
UK/ N. IRELAND HELPLINE 0871 3761020
REP. IRELAND HELPLINE 1-800-992508
-ii-
Quality
Medion has selected the components in this computer for their high level of functionality,
ease of use, safety and reliability.
Through balanced hardware and software design we are able to provide you with an in-
novative personal computer useful for applications relating to both work and leisure.
We are pleased to welcome you as our newest customer. Thank you for choosing our
products.
© 2008 Medion
®
. All rights reserved. Microsoft®, MS-DOS®, and Windows are registered trademarks of
Microsoft Corporation in the U.S. and other countries. Pentium® is a registered trademark of Intel
Corporation. The names of actual companies and products mentioned herein may be the trademarks
of their respective owners.
Information in this document is subject to change without notice.
UK/ N. IRELAND HELPLINE 0871 3761020
REP. IRELAND HELPLINE 1-800-992508
Table of contents
Safety............................................................................................................ 1
Operational Safety.......................................................................................................3
Data Security............................................................................................................3
Setting Up & Getting Started ....................................................................... 5
Included with your PC.................................................................................................7
Setting Up ...................................................................................................................8
Set-up Location........................................................................................................8
Ambient Temperature ..............................................................................................8
Ergonomics..............................................................................................................9
Connecting ...............................................................................................................11
Cabling ..................................................................................................................11
Front Connectors ...................................................................................................12
Connecting Speakers/Audio Output ......................................................................13
PCs with Surround Sound...................................................................................13
Connecting a Sound Source/Audio Input...............................................................13
LAN Connection.....................................................................................................14
Connecting IEEE 1394 (Fire Wire) Devices ..............................................................14
Connecting USB Devices ........................................................................................15
Installing wireless keyboard & mouse.................................................................16
Connecting Serial Devices......................................................................................19
Connecting PS/2 Devices .......................................................................................19
TV-out....................................................................................................................19
Connecting the Monitor.........................................................................................20
Antenna Connection for TV....................................................................................21
DVB-S TV reception.............................................................................................21
Analogue TV reception .......................................................................................21
DVB-T TV reception.............................................................................................21
Connecting headphones........................................................................................22
Connecting a Microphone .....................................................................................22
Connecting a Recording Source / Video Inlet .........................................................23
Connecting S-ATA devices......................................................................................23
Remove S-ATA devices ........................................................................................23
Connecting the Power Supply ...............................................................................24
Getting Started..........................................................................................................25
Step 1: Power On...................................................................................................25
Switch ................................................................................................................25
On/off Switch .....................................................................................................25
Step 2: Starting Initial Setup...................................................................................26
UK/ N. IRELAND HELPLINE 0871 3761020
REP. IRELAND HELPLINE 1-800-992508
-iv-
Step 3: Finalising....................................................................................................27
Short Description of the Windows
®
Desktop........................................................27
Operation ................................................................................................... 29
The Mouse ................................................................................................................31
Battery save function..............................................................................................31
The Keyboard ............................................................................................................32
The Alt and Ctrl Keys..............................................................................................32
Multimedia functions .............................................................................................33
The Hard Drive ..........................................................................................................34
Important Directories.............................................................................................35
Connecting an external hard drive .........................................................................36
The Optical Drive ......................................................................................................37
Loading a Disc:.......................................................................................................37
Playing Back and Retrieving Data from Discs ..........................................................37
How to Remove a Disc ...........................................................................................38
The Optical Drive as Boot Drive..............................................................................38
Regional Playback Information for DVD..................................................................38
Subjects Concerning the CD/DVD-Rewriter............................................................39
The Card Reader........................................................................................................40
The Graphics Card.....................................................................................................41
Personalize appearance and sounds.......................................................................41
Connecting the PC to a Television..........................................................................42
How to Connect the PC to a Television: ..............................................................43
The Sound Card ........................................................................................................44
IEEE 1394 (Fire Wire)..................................................................................................45
Application Options for IEEE1394...........................................................................45
Technical Specifications .........................................................................................45
USB Port ....................................................................................................................46
The Network .............................................................................................................47
What is a Network? ................................................................................................47
Wireless LAN ..........................................................................................................48
Safety Note .........................................................................................................48
Conditions..........................................................................................................48
Troubleshooting within the Network .....................................................................49
The TV Tuner Card ....................................................................................................50
Watch TV ...............................................................................................................50
The Remote Control ..................................................................................................50
UK/ N. IRELAND HELPLINE 0871 3761020
REP. IRELAND HELPLINE 1-800-992508
Inserting Batteries ..................................................................................................50
Button layout .........................................................................................................51
Changing the transmission/reception channels......................................................53
Serial COM Port.........................................................................................................54
Software....................................................................................................................55
Getting to Know Windows Vista
®
............................................................................55
Windows Vista
®
– Quick Start Guide ....................................................................55
Windows Vista
®
- Help and Support.....................................................................55
Windows Vista
®
– Welcome Center......................................................................56
Windows Vista
®
– User Account Control ..............................................................57
Installation of Software ..........................................................................................58
How to Install your Software...............................................................................58
Software Uninstallation.......................................................................................59
Windows Activation ...............................................................................................60
Product Activation on your PC ............................................................................60
BIOS Setup.............................................................................................................61
Execution of the BIOS Setup ...............................................................................61
BullGuard Internet Security ....................................................................................62
Customer Service & Self Help ..................................................................... 65
Data and System Security..........................................................................................67
Data Security..........................................................................................................67
Maintenance Programs ..........................................................................................67
Password Reset File ................................................................................................67
System Restore ..........................................................................................................68
Correction..............................................................................................................68
Windows
®
Update...................................................................................................69
Windows Update Information for Data Security ..................................................70
System Restore powered by Symantec ...................................................................71
Limits of the Recovery .........................................................................................71
Carrying out a Restore ........................................................................................71
FAQ – Frequently Asked Questions............................................................................72
Customer Service ......................................................................................................73
Troubleshooting ....................................................................................................73
Localise the Cause..................................................................................................73
Errors and Possible Causes .....................................................................................74
Additional Support.................................................................................................75
Driver Support .......................................................................................................75
Transporting the PC ...............................................................................................76
Cleaning and Care .................................................................................................76
Recycling and Disposal...........................................................................................76
UK/ N. IRELAND HELPLINE 0871 3761020
REP. IRELAND HELPLINE 1-800-992508
-vi-
Battery Treatment ..................................................................................................77
Upgrades and Repairs ............................................................................................78
Notes for Service Engineers.................................................................................78
Appendix .................................................................................................... 81
Standards ..................................................................................................................83
Electromagnetic Compatibility ...............................................................................83
Electrical Safety ......................................................................................................83
Ergonomics............................................................................................................83
Noise Emission .......................................................................................................84
Information about the Regulatory Compliance according to R&TTE......................84
FCC Compliance Statement ...................................................................................85
Making Copies of this Manual ................................................................................85
Index.........................................................................................................................86
Safety Connecting Operation Help Appendix
UK/ N. IRELAND HELPLINE 0871 3761020
REP. IRELAND HELPLINE 1-800-992508
Chapter 1
Safety
Subject Page
Operational Safety ..........................................................3
Data Security ...................................................................3
UK/ N. IRELAND HELPLINE 0871 3761020
REP. IRELAND HELPLINE 1-800-992508
-2-
Safety Connecting Operation Help Appendix
UK/ N. IRELAND HELPLINE 0871 3761020
REP. IRELAND HELPLINE 1-800-992508
-3-
Operational Safety
Please read this chapter carefully and observe all listed notes.
This ensures a reliable operation and long life expectancy of your PC.
• Do not allow children to play unattended with electrical equipment. Children are
incapable of judging potential risks properly.
• Keep the packing materials, such as plastic sheeting away from children. The dan-
ger of suffocation could arise in the case of misuse.
• Do not open the PC casing or use the PC with the casing removed. When the casing
is open there is a danger to life from electric shock.
• Optical drives are Laser Class 1 devices. These lasers must remain in their sealed PC
casing. Do not remove the drive covers, as exposure to the lasers may prove harm-
ful.
• Do not insert objects through the slots and openings of the PC. This may lead to
electric shock, electrical short-circuit or fire that will damage your PC.
• Do not cover the slots and openings in the PC casing. These openings are for venti-
lation purposes. Covering these vents may lead to overheating. Please keep free a
minimum distance of 20 cm on all sides when setting up the PC.
Switch off your PC immediately or do not switch it on at all and contact customer
service …
• … if the power cord or the connectors attached to it are burnt or damaged. Replace
the defective power cord with an original power cord. Under no circumstances may
a defective power cord be repaired.
• ... if the housing of the PC is damaged or fluids have leaked into it. Have the PC
checked by customer service first, because the PC may not be safely operated oth-
erwise and there may be a life-threatening risk of electrocution!
Data Security
Attention!
Every time you update your data make back-up copies on an external stor-
age medium. The supplier does not assume liability for data loss or damage
to data storage units, and no claims can be accepted for damages result-
ing from the loss of data or consequential losses.
UK/ N. IRELAND HELPLINE 0871 3761020
REP. IRELAND HELPLINE 1-800-992508
-4-
Safety Connecting Operation Help Appendix
UK/ N. IRELAND HELPLINE 0871 3761020
REP. IRELAND HELPLINE 1-800-992508
Chapter 2
Setting Up &
Getting Started
Subject Page
Included with your PC ......................................................7
Setting Up ........................................................................8
Connecting .....................................................................11
Getting Started ..............................................................25
UK/ N. IRELAND HELPLINE 0871 3761020
REP. IRELAND HELPLINE 1-800-992508
-6-
Safety Connecting Operation Help Appendix
UK/ N. IRELAND HELPLINE 0871 3761020
REP. IRELAND HELPLINE 1-800-992508
-7-
Included with your PC
Please check that the contents listed below are supplied with your package and notify us
within 14 days of purchase if this is not the case. You MUST provide your PC’s serial num-
ber when contacting a customer service representative.
Your PC bundle should include the following components:
• PC and power cord
• Wireless keyboard and mouse set containing of:
• Wireless keyboard +
2 batteries type Micro LR03/AAA, 1,5V
• Wireless mouse +
2 batteries type Mignon LR6/AA, 1,5V
• USB receiver
• Remote control type OR24E +
2 batteries type Micro LR03(SN)/AAA/1,5V
• OEM Version of Operating System
• Application-/ Support Disc
• Documentation
UK/ N. IRELAND HELPLINE 0871 3761020
REP. IRELAND HELPLINE 1-800-992508
-8-
Setting Up
Remember that choosing the proper location for your PC is just as important as connect-
ing it correctly.
Set-up Location
• Keep your PC and all units connected to it away from moisture, dust, heat and di-
rect sunlight. Failure to observe these instructions can lead to malfunctions or dam-
age to the PC.
• To prevent damage to your PC from a fall, place and operate the PC and all con-
nected units on a stable, balanced and vibration-free surface.
Ambient Temperature
• The PC can be operated at an ambient temperature of between 10° and 35°C
(+41° and +95°F) and at a relative humidity of between 30% and 70% (without
condensation).
• When powered off, the PC can be stored at temperatures between -20° and 50°C
(–40° and +158°F).
• Unplug the cable during thunderstorms and make especially sure to remove the an-
tenna cables, if present. We recommend the use of a surge protector for additional
safety, in order to protect your PC from being damaged by power peaks or light-
ning strikes through the power network.
• Delay operating a PC after transport until the device has adjusted to the ambient
temperature. In situations of large temperature or humidity differences condensa-
tion may build up moisture inside the PC, which might cause an electrical short cir-
cuit.
Safety Connecting Operation Help Appendix
UK/ N. IRELAND HELPLINE 0871 3761020
REP. IRELAND HELPLINE 1-800-992508
-9-
Ergonomics
Note
Ensure that the monitor is set up in such a way that reflections, glare and
light/darkness contrast are avoided.
You should not position the monitor in close proximity to a window as this is usually the
brightest area of the room and may cause visual impairments during daylight hours.
Always position the monitor in a line of sight that runs parallel to the window front (see
picture).
You should also apply a parallel line of sight with respect to artificial lighting. This means
that in a room lit by artificial light essentially the same criteria and objectives apply. Should
it not be possible to arrange the monitor as outlined above, the following measures might
be helpful:
• Turn, lower or incline the monitor.
• Place horizontal or vertical shades at the windows.
• Work in Comfort
Note
Take regular breaks from the work at your screen to prevent tenseness and
exhaustion.
Sitting in one position for long periods can be uncomfortable. To minimize the potential
for physical discomfort or injury, it’s important that you maintain proper posture.
UK/ N. IRELAND HELPLINE 0871 3761020
REP. IRELAND HELPLINE 1-800-992508
-10-
Overall:
Change your position frequently and take regular breaks to avoid fatigue.
Back:
While sitting at your work surface, make sure your back is supported by the chair’s back-
rest. This should be in an erect position or angled slightly backwards.
Legs:
Your thighs should be horizontal or angled slightly downward. Your lower legs should be
near a right angle to your thighs. Your feet should rest flat on the floor. If necessary, use a
footrest, but double check that you have your seat height adjusted correctly before getting
a footrest.
Arms:
Your arms should be relaxed and loose, elbows close to your sides, with forearms and
hands approximately parallel to the floor.
Wrists:
Your wrists should be as straight as possible while using the keyboard, mouse or trackball.
They should not be bent sideways, or more than 10 degrees up or down.
Head:
Your head should be upright or tilted slightly forward. Avoid working with your head or
neck twisted.
• Hand rest:
2” – 4”
• Viewing distance:
20” – 27.5”
• Legroom (vertical):
minimum 25.5”
• Legroom (horizontal): minimum
23.6”
• Top line of screen at eye level or
slightly below.
Safety Connecting Operation Help Appendix
UK/ N. IRELAND HELPLINE 0871 3761020
REP. IRELAND HELPLINE 1-800-992508
-11-
Connecting
For a better guidance, open up the left inner page of the cover with the dia-
grams to find the location of the described connections.
Note:
The devices listed are not necessarily included with your PC.
All the connections listed are optional and will not inevitably be available
on your PC.
Cabling
Please follow the instructions below in order to correctly connect your PC:
• Arrange cables in such a way that no one can tread on or trip over them.
• Do not place objects on the cables.
• To avoid damage to your PC, connect your peripherals (e.g., keyboard, mouse and
monitor) whilst your PC is powered off. Some devices can be connected whilst your
PC is in use. These devices usually have a USB connector. Please follow the appro-
priate instructions for each device.
• Keep the PC at least one meter (approximately three feet) away from high fre-
quency and magnetic interference sources (e.g., televisions, loudspeaker cabinets,
mobile telephones, etc.) in order to avoid malfunctions and/or loss of data.
• Please note that only shielded cables shorter than 3 meters (9.84 ft) should be used
for the external interfaces. Please only use double screened cables for printer cables.
• Do not replace the cables supplied with the machine by any others. Use the cables
belonging to the scope of the delivery exclusively, because they will have been
tested extensively in our laboratories.
• Also only use the connection cable supplied with the devices for the connection of
your peripheral devices.
• Make sure that all connection cables have been connected to the peripheral devices
associated with them, in order to avoid disruptive radiation. Remove unneeded ca-
bles.
• The connection of devices is limited to equipment that complies with EN60950
“Safety of information technology equipment” or EN60065 “Audio, video and simi-
lar electronic apparatus. Safety requirements”.
UK/ N. IRELAND HELPLINE 0871 3761020
REP. IRELAND HELPLINE 1-800-992508
-12-
• In the first hours of operation, new devices may emit a typical, unavoidable but
completely harmless smell, which will decline increasingly in the course of time.
We recommend that you ventilate the room regularly, in order to counteract the
formation of the smell. During the development of this product, we have made
sure that the applicable limits are clearly decreased.
Note
You only need to connect those components to your computer that you re-
quire. If you do not have the described device available (e. g. printer) you
may carry out the connection later.
Front Connectors
Diagram reference: D
Some connections are located behind the front flap. This offers you the great advantage of
creating frequently used connections quickly and conveniently, without turning the PC
round. The flap, which can be slid, also protects the connections.
(similar picture)
Press on the front screen,
so that it folds open. The
right image shows the
opened screen.
Turn the screen
back to its starting
position.
Optical drive
Front flap
Optical drive
Safety Connecting Operation Help Appendix
UK/ N. IRELAND HELPLINE 0871 3761020
REP. IRELAND HELPLINE 1-800-992508
-13-
Connecting Speakers/Audio Output
Diagram reference: E
Here you can connect your active speakers for replaying or audio connection cables
for recording. Please refer to the user's guide of your stereo installation for information
about which connector you should use (usually Line In or Aux).
1. Connect the cable with the 3.5 mm stereo jack plug into the green socket on the
rear of your PC.
PCs with Surround Sound
Diagram reference: E
Connect your surround equipment as follows:
1. Connect the Front speaker to the green socket (front out).
2. Attach the rear loudspeakers to the connector back surround.
3. Your centre speaker or subwoofer can be connected to the socket
centre/subwoofer.
4. Connect to the optional side surround socket two more speakers for the back sur-
round.
A digital audio output (SPDIF) can be connected to an optical and/or a coaxial cable.
Diagram reference: F1, F2
1. Plug an optical cable to the socket at position F1 or a Cinch cable to the socket at
position F2.
2. Connect the other end of the cable to an audio device with a corresponding digital
input.
Connecting a Sound Source/Audio Input
Diagram reference: G1, G2
This port is used to accommodate a connecting cable for external analogue audio
sources (i.e. stereo system, keyboard/synthesizer).
1. Connect the cable with the 3.5 mm stereo jack plug to the light-blue coloured
socket. Optionally, you can connect a stereo Cinch cable (position G2).
UK/ N. IRELAND HELPLINE 0871 3761020
REP. IRELAND HELPLINE 1-800-992508
-14-
LAN Connection
Diagram reference: H
Your PC is equipped with a network connection, in order to prepare it for network opera-
tion.
The network cable usually has two RJ45 plugs so that it is unimportant which plug is
connected to which jack.
1. Connect the one plug of the cable to the PC jack.
2. Connect the other plug to the other PC or hub/switch.
For further information refer to chapter “The Network” starting at page 47.
The voltage outputs of your PC for IEEE1394/USB are protected by a fuse (limited power
source according to EN60950). This ensures that a malfunction of the PC will not damage
the peripheral devices connected to the respective jacks.
Connecting IEEE 1394 (Fire Wire) Devices
Diagram reference: I
Warning!
Connect your IEEE 1394 devices after initial set-up of your new PC. This
will prevent unnecessary confusion during installation. These devices can
generally be connected during operation. Read the manual for your periph-
eral device first.
Note
Peripheral devices can have different connecting cables (6-pole, 4-pole ).
Please check what kind of cable you need for your peripheral device.
Note
Take care to ensure that the connector and the socket fit exactly to avoid
damaging the contacts. Because of its asymmetric form the plug only fits
into the socket in one position.
1. Connect the IEEE 1394 cable to the IEEE 1394 port of your PC.
Important
The connectors on the front side are not configured for parallel use.
Safety Connecting Operation Help Appendix
UK/ N. IRELAND HELPLINE 0871 3761020
REP. IRELAND HELPLINE 1-800-992508
-15-
Connecting USB Devices
Diagram reference: J
Warning!
Connect your USB devices after initial set-up of your new PC. This will
prevent unnecessary confusion during installation. These devices can gener-
ally be connected during operation. Read the manual for your peripheral
device first.
• The voltage outputs of your PC for USB are protected by a fuse (limited power
source according to EN60950). This ensures that a malfunction of the PC will not
damage the peripheral devices connected to the respective jacks.
You have a choice of several connection sockets. It does not matter which you use.
Note
Take care that the connector and the socket fit exactly to avoid damaging
the contacts. Because of its asymmetric form the plug only fits into the
socket in one position.
1. If you wish to use a printer, scanner or other device with a USB port, connect the
cable to the USB socket on your PC.
Note
Connect your devices always to the same port otherwise your operating sys-
tem will give a new ID and asks for driver installation.
UK/ N. IRELAND HELPLINE 0871 3761020
REP. IRELAND HELPLINE 1-800-992508
-16-
Installing wireless keyboard & mouse
The wireless keyboard and mouse operate with digital radio technology to ensure no cross
communication between the keyboard, the mouse and your computer without connect-
ing cables. The transmission and receiving of keyboard and mouse signals are free from
angle restriction. Before working with your new keyboard and mouse, ensure you take the
following steps.
Beware!
Please read and follow the security advices concerning the use of batteries
on page 77.
Inserting batteries in keyboard
The keyboard requires two alkaline batteries (LR03/AAA, 1,5V).
1. Remove the battery compartment cover on the bottom of the keyboard by pushing
it in the direction of the arrow.
2. Insert two LR03/AAA batteries. The illustration on the cover shows how to insert the
batteries properly.
3. Recover the battery compartment.
Note
If the battery status indicator on the keyboard lights up, exchange the batter-
ies and possibly conduct a frequency control.
Inserting batteries in mouse
The mouse requires two alkaline batteries (LR6/AA, 1,5V).
1. Push the lock of the battery compartment on the under-side of the mouse in the di-
rection of the arrow.
2. Lift the battery compartment cover gently, while holding the lock of the battery
compartment in the direction of the arrow.
3. Release the lock of the battery compartment and remove the battery compartment
cover carefully. Pay attention that you do not break off or damage either of the re-
sistance hooks on the battery compartment cover.
4. Insert two AA batteries. Ensure that the polarity corresponds to the illustration (+
must correspond with + and – with –).
5. Replace the battery compartment cover.
Safety Connecting Operation Help Appendix
UK/ N. IRELAND HELPLINE 0871 3761020
REP. IRELAND HELPLINE 1-800-992508
-17-
Connecting the receiver
Diagram reference: J
• Attach the receiving station for the mouse and keyboard to the USB port on your
PC.
• Set up the receiver with a minimum distance of 20 cm from other electrical appli-
ances (e.g. monitor) in order to obtain optimal results. The distance between the
receiving station and transmitters (keyboard and mouse) should not exceed 1.50
m. Do not place the receiver on metal surfaces.
Note
Change the batteries if it is no longer possible to make entries smoothly. The
operation of the mouse and the keyboard is described on page 31.
UK/ N. IRELAND HELPLINE 0871 3761020
REP. IRELAND HELPLINE 1-800-992508
-18-
Setting the frequency
(ill.: Setting the frequency mouse) (ill.: Setting the frequency keyboard)
(ill.: Setting the frequency receiver)
1. Press the automatic frequency control on the receiver.
2. Within 15 seconds, press the automatic frequency control key at the bottom of the
mouse with a pointed object (ball-point pen or the like).
3. Move the mouse. If the LED on the receiver lights up and the mouse pointer (if
available) moves, the control has taken place. If this is not the case, repeat Steps 1-3.
4. Press the automatic frequency control on the receiver.
5. Within 15 seconds, press the automatic frequency control key on the keyboard.
6. Press the space bar on the keyboard. If an LED on the receiver lights up, the control
has taken place. If not, repeat steps 4-6.
7. The devices are now coordinated with one another. If several equipment sets are
operated at the same time and, because of this, there is mutual interference, repeat
Steps 1-6 until the interference is remedied.
Safety Connecting Operation Help Appendix
UK/ N. IRELAND HELPLINE 0871 3761020
REP. IRELAND HELPLINE 1-800-992508
-19-
Connecting Serial Devices
Diagram reference: K
You can connect an external modem or another serial device using this port.
Note
Take care that the connector and the socket fit exactly to avoid damaging
the contacts. Because of its asymmetric form the plug only fits into the
socket in one position.
1. In order to connect an external modem, card reader or other serial device, connect
the serial cable with the turquoise-coloured connection socket (K) on the rear of
your PC.
2. Hand-tighten the screws of the serial cable.
Connecting PS/2 Devices
Diagram reference: L
You can omit this step if you want to connect a USB mouse or a USB keyboard.
1. Connect the mouse cable to the right, green PS/2 port.
2. Connect the keyboard to the left, blue PS/2 port.
TV-out
Diagram reference: N, M1, M2, M3
You can attach a television set to the video exit (TV-out) and transfer it to your computer
display. You will be able to use a SCART cable (M1), a composite cable (Cinch, M2), an S-
video cable (M2) or a component cable (M3).
Alternatively, if your television set has an appropriate port, you can use the digital HDMI
connection (High Definition Multimedia Interface) (N) for the transmission of picture and
sound signals.
Note
The video output can only be used for replaying.
1. Connect your PC and your television with the cord required for your TV.
UK/ N. IRELAND HELPLINE 0871 3761020
REP. IRELAND HELPLINE 1-800-992508
-20-
Connecting the Monitor
Diagram reference: N
Your PC is equipped with a VGA, DVI and a HDMI connector.
Note
Always only connect one data cable, in order to avoid problems with the
signal allocation, if your monitor has several inputs (e.g. VGA and DVI).
Note
Take care that the connector and the socket fit exactly to avoid damaging
the contacts. Because of its asymmetric form the plug only fits into the
socket in one position.
1. Connect the data cable of the monitor to the socket on the graphics card (reference
N). If necessary, remove the white guard-ring on the monitor plug and ensure that
the plug and socket mate together precisely.
2. Hand-tighten the screws on the monitor cable.
Caution!
Your PC monitor is preconfigured for a screen resolution of 1024 x 768
pixels and an optimal refresh rate of 60 hz. If your monitor does not sup-
port these settings it may become damaged or malfunction during use. You
can change the screen resolution and configuration of your monitor as fol-
lows (See also your monitor's User Manual).
You can change the screen resolution in the Control Panel under Personalize
appearance and sounds.
The Program can be started in the following way:
• Right mouse click on the Windows interface (Desktop) and a left mouse click on
Personalization.
or
• Through Start Ö Control Panel Ö Personalize appearance and sounds, by
double clicking with the left mouse button.
Safety Connecting Operation Help Appendix
UK/ N. IRELAND HELPLINE 0871 3761020
REP. IRELAND HELPLINE 1-800-992508
-21-
Antenna Connection for TV
DVB-S TV reception
Diagram reference: O1
You can watch television with your digital satellite equipment by means of the DVB-S
connection (O1).
1. Connect your satellite equipment to the TV socket of your TV card (O1).
Analogue TV reception
Diagram reference: O2
1. Connect a terrestrial aerial or cable television to the TV socket (O2) of your TV card.
DVB-T TV reception
Diagram reference: O2
You will have the possibility of using these services by means of a corresponding aerial
(not included in the scope of delivery), if DVB-T or digital services are offered at your loca-
tion.
1. Connect a DVB-T aerial to the TV socket (O2) of your TV card.
UK/ N. IRELAND HELPLINE 0871 3761020
REP. IRELAND HELPLINE 1-800-992508
-22-
Connecting headphones
Diagram reference: R
Here you connect headphones/earphones.
1. Connect the cable with the 3.5 mm stereo jack plug in the green socket at the
front of your PC (diagram reference R).
Caution!
The use of headphones/earphones with a high volume can lead to lasting
damage to your hearing. Set the volume to the lowest level before reproduc-
ing any sound. Start the sound reproduction and increase the volume to the
level that is comfortable for you. Changing the basic settings of the equalizer
can also cause damage to the hearing of the listener.
It can cause damage to the hearing ability of the
listener if a device is operated through earphones with
an increased volume for a long period.
Connecting a Microphone
Diagram reference: S
1. You can use the pink socket S to connect a microphone with a 3.5 mm mono jack
plug.
2. Position the microphone in such a way that it does not point directly at the speak-
ers. If you hear feedback, characterised by loud whistling noises, reposition the mi-
crophone until the sound stops.
Safety Connecting Operation Help Appendix
UK/ N. IRELAND HELPLINE 0871 3761020
REP. IRELAND HELPLINE 1-800-992508
-23-
Connecting a Recording Source / Video Inlet
Diagram reference: G2, T
You can connect an external video source to your PC using an S-Video or composite
(cinch) cable. These connections enable you to record and, if necessary, edit video data.
1. Connect a composite (cinch) or an S-Video cable to the socket T.
2. Use the audio input on the TV card (socket G2) to feed in the audio signal.
Connecting S-ATA devices
Diagram reference: U
eSATA stands for "external Serial ATA" and is used for connecting external hard disks.
Unlike common USB standards, the transmission speed of an e-SATA connection is higher
than that of external USB hard disks.
Note
Take care that the connector and the socket fit exactly to avoid damaging
the contacts. Because of its asymmetric form the plug only fits into the
socket in one position.
1. Connect the cable to the eSata socket in the front of your PC.
Remove S-ATA devices
1. Before removing an S-ATA hard disk from your PC, click on the icon "Safely remove
hardware" in the task bar and then on the hard disk to be removed.
Loading...