USB
Graphics tablet
© 2004 Medion®. All rights reserved. Trademarks:
Microsoft, MS-DOS and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
Intel and Pentium are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries.
Other trademarks are property of their respective owners.
Artwork is for illustrative purposes only. Actual product appearance may vary. Medion can not be held liable for misprints or typos.
CONTENTS |
|
Safety and Maintenance ......................................................... |
3 |
Ergonomics.............................................................. |
4 |
Inventory .................................................................. |
4 |
Technical data ............................................................ |
5 |
System requirements .................................................. |
5 |
Usage ....................................................................... |
5 |
Getting Started........................................................................ |
6 |
Insert the Battery into the pen...................................... |
6 |
Insert the battery into the cordless mouse...................... |
6 |
Used batteries - waste disposal .................................. |
7 |
Graphics tablet diagram............................................... |
7 |
Installation of the graphics tablet .................................. |
8 |
Driver installation ..................................................... |
9 |
Installation of the applications .................................. |
10 |
Uninstalling applications .......................................... |
11 |
Configuring the Graphics tablet................................... |
11 |
Calibrating the drawing pen ..................................... |
11 |
Customer service .................................................................. |
12 |
What to do in the event of problems ............................ |
12 |
Basic hints............................................................. |
12 |
Troubleshooting ..................................................... |
12 |
Technical Support................................................... |
13 |
Additional Support .................................................. |
13 |
Warranty ............................................................................... |
14 |
ii
SAFETY AND MAINTENANCE
Keep these instructions with your graphics tablet at all times. The proper set up, use and care can help extend the life of your graphics tablet. In the event that you transfer ownership of this device, please provide these instructions to the new owner.
ÖWhenever you edit your data, make backup copies on an external data medium (e.g., floppy disks, CD). We not liable for loss of data and consequential damages.
ÖThis product is designed to run on a PC/AT (IBM-compatible) computer with a free USB-port.
ÖFollow the safety instructions for the computer to which you are connecting the device.
ÖNever open up the component housings. This might lead to a shortcircuit or even a fire.
ÖNever allow children to use electronic devices unsupervised. Children may not always correctly identify potential hazards.
ÖArrange the connection set so that no one can tread on or trip-over it.
ÖThis device should only be repaired by an authorized service partner. Please contact customer service if you have any technical problems.
ÖOnly a qualified engineer should perform upgrades and repairs.
If you do not have the necessary qualifications, go to an appropriate Service Engineer. Please contact customer care if you are experiencing technical problems with this device.
ÖKeep the device away from moisture and avoid dust, heat and direct sunlight. Ensure an ambient temperature that is suitable for office equipment.
ÖAllow a clearance of at least 20 inches from sources of highfrequency and magnetic interference (TV, mobile telephone, infrared devices, loudspeaker cabinets, etc), in order to avoid malfunctions and loss of data. The clearance between the transmitter and the charging/slave station should be greater than 20 inches.
ÖPosition and operate this device only on a stable, flat and vibrationfree surface.
3
ÖBefore cleaning the devices, remove the cable connection from the computer. Clean the devices and other components with a damp cloth. Do not use any solvents, corrosive or gaseous detergents.
ÖWhen connecting additional or other components the EMC (electromagnetic compatibility) directives must be adhered to. Do not operate the mouse when it is in the charger. The devices are not intended for use in a heavy industry environment.
ERGONOMICS
Medical studies have shown that certain physical ailments and injuries are linked to prolonged and repetitive movements in an unsuitable working environment and to bad working habits. Take frequent breaks when using a computer. If you experience pain, numbness or tingling in your arms, wrists, hands or fingers, consult a medical doctor.
Remove the power plug of your computer from the power outlet and contact customer care:
•if the connections are grazed or damaged;
•if liquid has entered the device housing;
•if a device does not operate correctly;
•if a device is dropped or the housing damaged.
INVENTORY
Please check that these contents are complete and notify us within 14 days of purchase if any item is missing. The product you have purchased contains:
Graphics tablet with USB cable set
Pen*
Wireless mouse*
2 batteries (AAA, 1.5 V)
Installation and application software
This user manual
* ONLY for use with the Graphics tablet.
4
TECHNICAL DATA
|
Active surfaces |
9 x 12 in. (height x width) |
|
|
|
|
Maximum resolution |
3048 lpi / 120 lpmm |
|
|
|
|
Sensitivity |
512 Steps |
|
|
|
|
Connection |
USB |
|
|
|
|
Environment temperature |
41° F – 104° F |
|
|
|
|
Humidity |
20% - 80% (noncondensing) |
|
|
|
|
Mouse operating battery |
Microcells LR03 AAA type, 1.5V |
|
|
|
|
Pen operating battery |
Microcells LR03 AAA Type, 1.5V |
|
|
|
|
Certification |
CE, FCC, VCCI CI.II |
|
|
|
|
|
|
SYSTEM REQUIREMENTS
|
Computer |
PC/AT compatible computer |
|
Processor performance |
Pentium class 200MHz or higher |
|
|
|
|
Operating system |
Windows® 98SE/ME/2000/XP |
|
RAM |
32 MB, 64 MB or more recommended |
|
|
|
|
Hard disk storage |
at least 10 MB of free storage |
|
Installation |
CD-ROM Drive |
|
|
|
|
Connection |
USB |
|
|
|
USAGE
With this Graphics tablet, new forms of graphics data input are available to you. The familiar ergonomics of the touch-sensitive pen allow you to draw directly into your Graphics program. You will be able to increase the efficiency of the input of your designs. Digitally, the drawing produced with the Graphics tablet, as always, can be further processed by specific digital imaging application software. The drawing pen has two buttons available, which can be programmed with the desired functions. The included cordless mouse offers you three programmable buttons for optimal functionality and control.
5
Loading...