Temperature Sensors
C7735 Return Air Sensor
Application: Mount on return duct for backup control of non-zoned systems
Dimensions, Approximate: 3 7/8 in. high x 4 1/8 in. wide x 1 1/4 in. deep (77 mm x 102 mm x 25 mm). Sensor probe: 3 3/4 in. long (77 mm)
Mount on return duct for backup control of non-zoned RedLINK™ enabled wireless systems. Works with the EIM to maintain safe indoor temperatures if power is lost at the wireless thermostat.
•Works with THM5320R1000 Equipment Interface Module to maintain safe indoor temperatures if power is lost at the wireless thermostat
•Takes control of the equipment by turning on the blower fan and sensing the indoor temperature of the home
•Controls heating at 62 F and cooling at 82 F
•Provides homeowners with peace of mind
•Installs in minutes
•Includes mounting hardware
Color: Gray
Operating Temperature Range: 0 F to 200 F (-17.8 C to 93.3 C)
Mounting: Mounts on return duct
|
|
|
Product Number |
Comments |
Used With |
|
|
|
C7735A1000/U |
Return Air Sensor is also available in kits for |
THM5320R1000 Equipment Interface Module; TH6320R1004 or TH5320R1002 |
|
non-zoned systems |
Wireless FocusPRO® Thermostat |
|
|
|
C7089 Outdoor Sensor
Dimensions, Approximate: 2 1/4 in. x 3/8 in. with 60 in. leadwires (57 mm x 10 mm with 1524 mm leadwires.)
Operating Humidity Range (% RH): 5 to 95% RH, non-condensing
Remote outdoor temperature sensor, when installed, the current outdoor temperature is displayed. Also can be used to manage dual fuel and lock-out expensive auxiliary heat in heat pump applications.
•Mounting clip allows easy sensor positioning on siding or soffit
•Includes 60 in. leadwires
•Factory calibrated; no field calibration required
•Maximum wire run of 200 feet
Ambient Temperature Range: -40 F to +128 F (-40 C to +53 C)
Mounting: Mounting Clip provided and screws provided.
|
|
|
|
Product Number |
Description |
Application |
Used With |
|
|
|
|
C7089B1000/U |
Outdoor sensor used to measure |
Outdoor sensor for Chronotherm IV |
TZ-4 Zone Panel |
|
outdoor temperature |
thermostats and TZ-4 Zone Panel |
|
|
|
|
|
C7089U1006/U |
Outdoor Sensor used to measure |
Outdoor sensor for Prestige® IAQ, |
Prestige® IAQ, VisionPRO® Series Thermostats, |
|
the outdoor temperature |
VisionPRO with RedLINK™ and |
VisionPRO® IAQ Thermostat |
|
|
VisionPRO IAQ Thermostats |
|
|
|
|
|
C7189 Remote Indoor Sensor
|
|
|
The Remote Indoor Temperature Sensor is used to sense |
||
|
|
|
temperature remotely. |
|
|
|
|
|
• Used to sense temperature if the thermostat is installed in a |
||
|
|
|
|
poor temperature sensing location. |
|
|
|
|
• Small remote temperature sensor to match any room decor. |
||
|
|
|
• Easy to install and use. |
|
|
|
|
|
• Factory calibrated; no field calibration required. |
||
|
|
|
• Works with a maximum 200 foot wire run. |
||
|
|
|
Application: Remote Indoor Temperature Sensor for Prestige® IAQ, |
||
|
|
|
VisionPRO and VisionPRO IAQ Thermostats |
||
|
|
|
Dimensions, Approximate: 1 1/2 in. wide x 2 1/4 in. high x 3/4 in. deep |
||
|
|
|
(38 mm x 57 mm x 19 mm) |
|
|
|
|
|
Color: Premier White® |
|
|
|
|
|
Operating Humidity Range (% RH): 5 to 95% RH, non-condensing |
||
|
|
|
Ambient Temperature Range: 45 F to 88 F (7 C to 32 C) |
||
|
|
|
Mounting: Mounts directly on wall using mounting screws and anchors |
||
|
|
|
provided |
|
|
|
|
|
|
|
|
|
Product Number |
Description |
|
Temperature Setting Range |
Used With |
|
|
|
|
|
|
* |
C7189U1005/U |
Remote indoor sensor for remote sensing applications |
|
See Thermostats |
Prestige IAQ®, VisionPRO® and |
|
|
|
|
|
VisionPRO® IAQ Series Thermostats |
|
|
|
|
|
|
* TRADELINE models • SUPER TRADELINE models |
|
|
|
||
|
|
|
|
|
|
<![endif]>Home
<![if ! IE]><![endif]>Controls
70-6910 |
|
|
|
35 |
|
|
Loading...