Honeywell CM 507 A User Manual

5 (2)
Honeywell CM 507 A User Manual

n Introduction

1.1Description

The Honeywell CM507 is a programmable room thermostat designed to control your heating system efficiently. The following instructions explain how to install, program and use the CM507.

1.2Features

7-day heating program with factory default energy saving schedule

Time-line display facilitating programming

Subtle, unobtrusive styling matching variety of room decors

 

Adjustment

Display

buttons

Comfort

Economy

 

Mode selection /

Program

program exit

temperature

temperature

button

 

preset

preset

 

 

 

Display

 

Appears when the

: Comfort temperature indicator

set temperature is

displayed

: Economy temperature indicator

Temperature

Time

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Day

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Manual mode

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Automatic mode

 

 

 

 

 

 

 

 

Schedule

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Heating is On

Low battery indicator

 

 

 

 

o Installation

NOTE: The installation must be performed by an electrician or a qualified installer.

2.1Baseplate Installation

Choose a location approximately 1.5 m above the floor and on an inside wall. Avoid draughty areas (top of staircase, air outlet, etc.), dead air spots (behind doors), direct sunlight or areas near concealed pipes or chimneys.

CM507A

Programmable Room Thermostat

Installation and User Guide

2.2Wiring

2.3Installing the Batteries

:

Use Alkaline batteries only!

After the batteries are installed, the thermostat performs a series of tests for approximately 5 seconds.

Once installed on the wall, the thermostat will display the ambient temperature. The time and day settings flash to indicate that they must be set (see section 4.1).

2.4Completing the Installation

p Basic Functions

3.1Displaying the Temperature

The measured temperature is normally displayed. To view the set temperature, press once on either of the buttons. The set temperature is displayed for 5 seconds along with the icon.

NOTE: Pressing either of the buttons more than once will change the set temperature.

CM507A

400-147-024-A

2/6/05

1/2

Loading...
+ 1 hidden pages