GPSMAP® 500/700 Series and echoMAP™ 50/70 Series
Quick Start Manual
February 2013 |
190-01556-01_0A |
Printed in Taiwan |
WARNING
See the Important Safety and Product Information guide in the product box for product warnings and other important information.
Power key
À
Automatic backlight sensor
Á
Touchscreen
Â
microSD™ memory card slot
Ã
•Tap the screen to select an item.
•Drag or swipe your finger across the screen to pan or scroll.
•Pinch two fingers together to zoom out.
•Spread two fingers apart to zoom in.
Automatic backlight sensor
À
Power key
Á
Â
microSD memory card slot
Ã
Device Keys
Turns on and off the device when held.
Adjusts the backlight and color mode.
Zooms out of a chart or view.
Zooms in to a chart or view.
Scrolls, highlights options, and moves the cursor.
Select Acknowledges messages and selects options.
Back Returns to the previous screen.
Mark Saves the present location as a waypoint.
Home |
Returns to the Home screen. |
Menu |
Opens a menu of options for the page, when applicable. |
|
Closes a menu, when applicable. |
|
|
When you turn on the chartplotter, the GPS receiver must collect satellite data and establish the current location. When the chartplotter acquires satellite signals, appears at the top of the Home screen. When the chartplotter loses satellite signals, disappears and a flashing question mark appears over on the chart.
For more information about GPS, go to www.garmin.com /aboutGPS.
1 Select Settings > System > Display > Backlight.
TIP: Press from any screen to access the backlight settings.
2Select an option:
•Adjust the backlight level.
•Select Enable Auto Backlight or Auto.
1 Select Settings > System > Display > Color Mode.
2 Select an option.
You can use optional memory cards in the chartplotter. Map cards allow you to view high-resolution satellite imagery and aerial reference photos of ports, harbors, marinas, and other points of interest. You can use blank memory cards to transfer data such as waypoints, routes, and tracks to another compatible Garmin chartplotter or a computer.
1 Open the access door on the front of the chartplotter.
À
2 |
Insert the memory card Á with the label facing to the right. |
3 |
Press the card in until it clicks. |
4 |
Close the door. |
Waypoints are locations you record and store in the device.
From any screen, select Mark.
2Select an option:
•To create the waypoint by entering position coordinates, select Enter Coordinates, and enter the coordinates.
•To create the waypoint using a chart, select Use Chart, select the location, and select Move Waypoint.
When you mark a waypoint, you can designate it as a man overboard (MOB) location.
2