Apple LED
Cinema Display
Apple Inc.
© 2008 Apple Inc. All rights reserved.
Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Apple.
The Apple logo is a trademark of Apple Inc., registered in the U.S. and other countries. Use of the “keyboard” Apple logo (Option-Shift-K) for commercial purposes without the prior written consent of Apple may constitute trademark infringement and unfair competition in violation of federal and state laws.
Every effort has been made to ensure that the information in this manual is accurate. Apple is not responsible for printing or clerical errors.
Apple
1 Infinite Loop Cupertino, CA 95014-2084 408-996-1010 www.apple.com
Apple, the Apple logo, Apple Cinema Display, iChat, iMovie, iPod, iSight, Mac, MacBook, MagSafe, and Photo Booth are trademarks of Apple Inc., registered in the U.S. and other countries.
iPhone is a trademark of Apple Inc.
Apple Store is a service mark of Apple Inc., registered in the U.S. and other countries.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Apple is under license.
ENERGY STAR is a U.S. registered trademark.
Other company and product names mentioned herein may be trademarks of their respective companies. Mention of third-party products is for informational purposes only and constitutes neither an endorsement nor a recommendation. Apple assumes no responsibility with regard to the performance or use of these products.
Contents
7 Getting Started
8 Setting Up Your Display
10 Using Your Display
14Care and Safety
15Ergonomics
17Troubleshooting Your Display
18Learning More, Service, and Support
19Specifications
21Premiers contacts
22Installation du moniteur
24 Utilisation du moniteur
28Entretien et sécurité
29Ergonomie
31Dépannage du moniteur
32Informations, services et assistance
33Spécifications
3
35Einführung
36Einrichten Ihres Bildschirms
38 Verwenden des Bildschirms
42 Sicherheit und Pflege
44 Ergonomie
46Fehlerbeseitigung
47Weitere Informationen, Service und Support
48Technische Daten
49Introduzione
50Installare il monitor
52 Utilizzare il monitor
56Sicurezza e manutenzione
57Disposizione dell’ambiente di lavoro
59Risoluzione dei problemi del monitor
60Ulteriori informazioni, servizio e supporto
61Specifiche tecniche
63Aan de slag
64Het beeldscherm installeren
66 Het beeldscherm gebruiken
70Voorzorgsmaatregelen en veiligheid
71Ergonomie
73 Problemen met het beeldscherm oplossen
4Contents
74Meer informatie over service en ondersteuning
75Specificaties
77Primeros pasos
78Instalación de la pantalla
80 Utilización de la pantalla
84Mantenimiento y seguridad
85Ergonomía
87Solución de problemas con la pantalla
88Más información, servicio y soporte
89Especificaciones
91Introduktion
92Opstille skærmen
94 Bruge skærmen
98Vedligeholdelse og sikkerhed
99Ergonomi
101Fejlfinding til skærmen
102Flere oplysninger samt service og support
103Specifikationer
105Introdução
106Instalação do monitor
108 Utilização do monitor
112 Cuidado e segurança
Contents 5
113 Ergonomia
115Resolução de problemas do monitor
116Mais informações, assistência e suporte
117Especificações
119Regulatory Compliance Information
120Apple and the Environment
6Contents
Your Apple LED Cinema Display is designed to work seamlessly with the MacBook family of computers that have a Mini DisplayPort connector. It features a 24-inch LED-backlit widescreen display, a MagSafe connector to charge your MacBook computer, a built-in iSight camera, a speaker system, and a microphone.
The instructions on the following pages help you set up and use your new display, including:
ÂConnecting the display to your computer
ÂUsing the camera, microphone, speakers, and USB ports
ÂAdjusting your display’s settings
Important: Read all the installation instructions (and the safety information starting on page 14) carefully before you first use your display.
For information about the specific computers and graphics cards that are compatible with your display, go to www.apple.com/displays.
English 7
Follow these steps to set up your Apple LED Cinema Display:
1 Remove the protective film from the display and cables.
2Insert the power cord into the display, and then insert the AC plug into a grounded power outlet.
3 Connect the Mini DisplayPort cable to your computer, as shown below.
Apple LED Cinema Display
Mac portable |
Power |
|
outlet |
MagSafe USB |
Mini |
|
DisplayPort |
4Connect the USB cable to your computer to use the display’s built-in iSight camera, speakers, microphone, and USB ports.
5Plug the MagSafe connector into the MagSafe power port on your computer to charge the battery and provide power to your computer.
6Press the power button on your computer to start it up. The display turns on automatically when you start up your computer.
8English
You can close the lid of your computer and use just your Apple LED Cinema Display. Follow the setup instructions on the previous page and make sure the MagSafe connector from the display is plugged into the MagSafe power port on your computer.
To use your Apple LED Cinema Display with your computer’s display closed:
1Connect an external USB keyboard and mouse to the USB port on your display or use the Bluetooth® Setup Assistant to set up a wireless keyboard and mouse.
2 Make sure your computer is turned on.
3 Close the display on your computer to put it to sleep.
4Wait a few seconds, and then press any key on the external keyboard or move the mouse to wake your computer.
English 9
Your Apple LED Cinema Display has a built-in iSight camera, microphone, and display speaker system. The USB connection between the display and your computer enables these features.
|
Built-in |
Microphone |
iSight camera |
Display speaker system
You can listen to music, movies, games, and multimedia files through the speaker system on your display. You can use the microphone to record sounds, or talk with friends using iChat. Use Sound preferences to manage sound input and output.
To set up sound input:
1 Choose Apple ( ) > System Preferences, and then click Sound.
2 Click the Input tab in Sound preferences.
3 Choose Display Audio to input sound through your display’s microphone.
10 English
To set up sound output: 1 Click the Output tab.
2Choose Display Audio to hear sound through your display’s speaker system.
These sound settings are used whenever your computer is connected to your display. They remain in effect until you change them.
You can use the built-in iSight camera and microphone to capture still images, video, and audio with applications such as iChat, iMovie, and Photo Booth.
To set up the camera and microphone with iChat:
1 Click the iChat icon in the Dock to open the iChat application.
2 Choose iChat > Preferences, and then click Audio/Video.
3 Choose Display iSight from the Camera pop-up menu.
4 Choose Display Audio from the Microphone pop-up menu.
When you leave your computer’s display open, you can mirror the same image on both displays or use the displays as an extension of your desktop. Use Displays preferences to set up video mirroring or extended desktop.
To set video mirroring or extended desktop:
1 Choose Apple ( ) > System Preferences, and then click Displays.
2 Click Arrangement and follow the onscreen instructions.
English 11
You can use your Apple Keyboard to increase () or decrease () the brightness of your display. You can also use System Preferences to adjust the resolution, brightness, and color settings.
To adjust the resolution, the number of colors, or the brightness of your display: 1 Choose Apple ( ) > System Preferences, and then click Displays.
2 Click the Display tab.
3Choose a resolution or color setting, or drag the Brightness slider to adjust the brightness.
To change the display profile or calibrate your display: 1 Click the Color tab in Displays preferences.
2Choose a display profile, or click Calibrate to open the Display Calibrator Assistant.
For more information about calibrating your display, choose Help > Mac Help in the menu bar, and search for “calibrate.”
12 English
Your display has three powered USB ports on the back. Use these ports to connect a mouse, keyboard, iPhone, iPod, or other USB peripheral. Make sure the display’s USB cable is connected to your computer.
USB ports
Security slot
To secure your display, use the security slot to attach a locking cable.
You can attach your display to an alternative mounting solution, using the VESA Mount Adapter kit available from the Apple Online Store at www.apple.com/store. Use the kit to attach your display to any available VESA-compatible mounting solution. Simply follow the instructions included with the kit.
English 13
Before you lift or reposition your display, you may need to disconnect the cables and power cord. Use correct lifting techniques when positioning the display. When lifting or carrying the display, hold it by the edges. Don’t lift the display by the stand or the cord.
To clean the screen on your display: 1 Disconnect the power cord.
2Use the cloth that came with your display or another soft, dry cloth to wipe dust from the screen.
WARNING: Don’t clean the screen with a cleaner containing alcohol or acetone. Use a cleaner intended for use with a screen or display. Never spray cleaner directly on the screen. It may drip inside the display and cause damage.
Follow these safety guidelines for using your display:
ÂThe only way to completely disconnect power is to unplug the power cord. Be sure to pull the plug, not the cord.
ÂDisconnect power immediately if the power cord is frayed or damaged, if you spill something on the display, or if the display falls or is damaged in some other way.
WARNING: Use only the power cord that came with your display. The power cord has a three-wire grounding plug (a plug that has a third grounding pin) that fits only a grounded AC outlet. If you are unable to insert the plug into an outlet because the outlet is not grounded, contact a licensed electrician to replace the outlet with a properly grounded outlet.
14 English
WARNING: Your display is a high-voltage component and should not be opened for any reason, even when it’s unplugged. If your display needs service, see “Learning
More, Service, and Support” on page 18.
Here are some guidelines for adjusting your display to reduce glare and to accommodate your physical size and shape.
ÂArrange the display so that the top of the screen is slightly below your eye level when you’re sitting at the keyboard. The best distance from your eyes to the screen is up to you, although most people tend to prefer 18 to 28 inches (45 to 70 cm).
English 15
ÂPosition the display by tilting it up or down to minimize glare and reflections from overhead lights and nearby windows.
Shoulders |
|
relaxed |
18–28 in. (45–70 cm) |
Forearms and hands in a straight line
Forearms level or tilted slightly
Lower back supported
Thighs tilted slightly
Top of the screen at or slightly below eye level (You may need to adjust the height of your display by raising or lowering your work surface)
Screen positioned to avoid reflected glare
Clearance under work surface
Feet flat on the floor or on a footrest
For more information about health, safety, and maintenance, go to the Apple ergonomic website at www.apple.com/about/ergonomics.
16 English
Before performing any of these steps, make sure your computer is turned on, the display is plugged into an outlet, all the cables are connected properly to your computer and display, and your computer is not in sleep mode.
If the screen doesn’t have an image:
ÂCheck the cables and connectors again to make sure they are connected properly to your computer and the display.
ÂMake sure your computer is turned on and is not in sleep mode. If your computer’s display is closed, use the external keyboard or mouse to wake the computer from sleep.
ÂReset the PRAM by restarting your computer while holding down the Command (x), Option, P, and R keys until you hear the startup sound a second time.
If the screen is dim:
ÂMake sure the display brightness controls are set properly. Choose Apple ( ) > System Preferences and click Displays. Drag the Brightness slider to adjust the brightness.
ÂIf the colors on the display are too saturated or not correct, you may need to calibrate your display. Open Displays preferences, click Color, click Calibrate, and follow the instructions.
If your portable computer isn’t charging:
Make sure the MagSafe connector from your display is seated properly in the MagSafe power port on your computer.
English 17
If the built-in iSight camera, microphone, speakers, or USB ports on the display aren’t working:
Make sure the USB cable from the display is firmly plugged into the USB port on your computer. The display’s camera, microphone, speakers, and USB ports work only when this cable is attached to your computer.
You can find more troubleshooting information on the Displays support website at: www.apple.com/support/displays
You can find more information about your display on the Apple website and in Mac Help.
To learn about |
Do this |
Using your display |
Choose Help > Mac Help in the menu bar, and search for |
|
“displays.” |
|
|
Displays service, support, |
Go to: www.apple.com/support/displays |
discussions, troubleshooting, |
|
and software downloads |
|
|
|
The latest information about |
Go to: www.apple.com/displays |
displays |
|
|
|
Registering your display |
Go to: www.apple.com/register |
|
|
18 English
ÂModel number: A1267
ÂResolution: 1920 x 1200 @ 60 Hz
ÂPorts: Three USB 2.0 ports on the back
ÂCamera and microphone: Built-in iSight camera with microphone
ÂSpeakers: Built-in 2.1 speakers with 12 W output
Dimensions:
ÂWeight: 20.92 lb. (9.49 kg)
ÂHeight: 18.84 inches (478.38 mm)
ÂWidth: 22.57 inches (573.22 mm)
ÂDepth (with stand): 7.76 inches (197.10 mm)
ÂViewable: 24 inches (609.60 mm) diagonal
Operating environment:
ÂOperating temperature: 50° to 95° F (10° to 35° C)
ÂRelative humidity: 20% to 80% (noncondensing)
ÂAltitude: 0 to 10,000 feet (0 to 3048 meters)
English 19
Votre moniteur Apple LED Cinema Display est conçu pour fonctionner parfaitement avec la famille d’ordinateurs MacBook possédant un connecteur Mini DisplayPort. Il comprend un moniteur à écran large à rétro-éclairage par diode électroluminescente de 24 pouces, un connecteur MagSafe pour recharger votre ordinateur MacBook, une caméra iSight intégrée, un système de hautparleurs et un micro.
Les instructions des pages suivantes vous permettent de configurer et d’utiliser votre nouveau moniteur et de :
Âbrancher le moniteur sur votre ordinateur ;
Âutiliser la caméra, le micro, les haut-parleurs et les ports USB ;
Ârégler votre moniteur.
Important : lisez soigneusement toutes les instructions d’installation (et les consignes de sécurité à partir de la page 28) avant d’utiliser votre moniteur pour la première fois.
Pour en savoir plus sur les ordinateurs et les cartes graphiques compatibles avec votre moniteur, rendez-vous sur www.apple.com/fr/displays.
Français 21
Suivez ces étapes afin de configurer votre moniteur Apple LED Cinema Display:
1 Retirez le film protecteur du moniteur et des câbles.
2Branchez le câble d’alimentation sur le moniteur, puis la fiche CA dans une prise de courant avec mise à la terre.
3 Branchez le câble Mini DisplayPort sur votre ordinateur, comme illustré ci-dessous.
Moniteur Apple LED Cinema Display
Portable Mac |
Prise |
|
d’alimentation |
MagSafe USB |
Mini |
DisplayPort
4Branchez le câble USB sur votre ordinateur pour utiliser la caméra iSight, les haut-parleurs, le micro et les ports USB intégrés du moniteur.
5Branchez le connecteur MagSafe sur le port secteur MagSafe de votre ordinateur pour recharger la batterie et alimenter votre ordinateur.
6Appuyez sur le bouton d’alimentation de l’ordinateur pour l’allumer. Le moniteur s’allume automatiquement lorsque vous mettez l’ordinateur sous tension.
22 Français
Vous pouvez fermer le couvercle de votre ordinateur et utiliser votre moniteur Apple LED Cinema Display. Suivez les instructions d’installation à la page précédente et assurez-vous que le connecteur MagSafe du moniteur est branché sur le port secteur MagSafe de votre ordinateur.
Pour utiliser votre moniteur Apple LED Cinema Display avec le moniteur de votre ordinateur fermé :
1Branchez un clavier et une souris USB externes sur le port USB de votre moniteur ou utilisez l’Assistant réglages Bluetooth® pour installer un clavier et une souris sans fil.
2 Assurez-vous que votre ordinateur est activé.
3 Fermez le moniteur de votre ordinateur pour le mettre en mode veille.
4Attendez quelques secondes, puis appuyez sur n’importe quelle touche du clavier externe ou déplacez la souris pour réactiver votre ordinateur.
Français 23
Votre moniteur Apple LED Cinema Display possède une caméra iSight, un micro et un système de haut-parleurs intégrés. La connexion USB entre le moniteur et votre ordinateur active ces fonctionnalités.
Caméra iSight
Microphone intégrée
Système de haut-parleurs de l’écran
Vous pouvez écouter de la musique, des films, des jeux et des fichiers multimédia grâce au système de haut-parleurs de votre moniteur. Le micro vous permet d’enregistrer des sons ou de parler avec des amis à l’aide d’iChat. Utilisez les Préférences audio pour gérer l’entrée et la sortie audio.
Pour configurer l’entrée audio :
1 Sélectionnez le menu Pomme ( ) > Préférences Système puis cliquez sur Son.
2 Cliquez sur l’onglet Entrée dans Préférences audio.
24 Français
3Sélectionnez Audio du moniteur pour utiliser le micro de votre moniteur comme entrée audio.
Pour configurer la sortie audio : 1 Cliquez sur l’onglet Sortie.
2Sélectionnez Audio du moniteur pour utiliser le système de haut-parleurs de votre moniteur comme sortie audio.
Ces réglages sonores sont utilisés chaque fois que votre ordinateur est connecté à votre moniteur. Ils restent actifs jusqu’à ce que vous les modifiiez.
La caméra iSight et le microphone intégrés vous permettent de capturer des images, de la vidéo et de l’audio avec des applications comme iChat, iMovie et Photo Booth.
Pour configurer la caméra et le micro avec iChat :
1 Cliquez sur l’icône iChat dans le Dock pour ouvrir l’application iChat.
2 Choisissez iChat > Préférences, puis cliquez sur Audio/Vidéo.
3 Choisissez iSight du moniteur dans le menu local Caméra.
4 Choisissez Audio du moniteur dans le menu local Micro.
Lorsque vous gardez le moniteur de votre ordinateur ouvert, vous pouvez afficher la même image sur les deux moniteurs ou bien les utiliser comme extension de votre bureau. Utilisez Préférences Moniteurs pour configurer la recopie vidéo ou le bureau étendu.
Français 25
Pour configurer la recopie vidéo ou le bureau étendu :
1 Sélectionnez le menu Pomme ( ) > Préférences Système puis cliquez sur Moniteurs.
2 Cliquez sur Disposition et suivez les instructions à l’écran.
Vous pouvez utiliser votre clavier Apple Keyboard pour augmenter () ou réduire () la luminosité de votre moniteur. Les Préférences Système vous permettent également de régler la résolution, la luminosité et la balance des couleurs.
Pour régler la résolution, le nombre de couleurs ou la luminosité de votre écran : 1 Sélectionnez le menu Pomme ( ) > Préférences Système puis cliquez sur Moniteurs.
2 Cliquez sur l’onglet Moniteur.
3Choisissez un réglage de résolution ou de couleur ou faites glisser le curseur pour régler la luminosité.
Pour changer le profil de moniteur ou étalonner votre moniteur : 1 Cliquez sur l’onglet Couleur dans Préférences Moniteurs.
2Choisissez un profil de moniteur ou cliquez sur Étalonner pour ouvrir l’assistant de l’outil d’étalonnage du moniteur.
Pour en savoir plus sur l’étalonnage de votre moniteur, sélectionnez Aide > Aide Mac dans la barre des menus et effectuez une recherche sur « étalonner ».
26 Français
Votre moniteur présente trois ports USB à l’arrière. Utilisez-les pour brancher une souris, un clavier, un iPhone, un iPod ou d’autres périphériques USB. Assurez-vous que le câble USB du moniteur est branché sur votre ordinateur.
Ports USB
Logement de sécurité
Pour protéger votre moniteur, utilisez le logement de sécurité pour attacher un câble de sécurité.
Il est possible d’utiliser d’autres configurations de montage à l’aide du kit VESA Mount Adapter en vente sur l’Apple Store en ligne à l’adresse www.apple.com/fr/store. Utilisez ce kit pour connecter votre moniteur à n’importe quelle configuration de montage compatible avec la norme VESA. Suivez les instructions qui accompagnent le kit de montage.
Français 27
Avant de soulever ou déplacer votre moniteur, il peut s’avérer nécessaire de débrancher les différents câbles, dont le câble d’alimentation. Lorsque vous soulevez ou déplacez le moniteur, utilisez la méthode la plus adéquate. Tenez-le toujours par les côtés, jamais par le support ou le câble d’alimentation.
Pour nettoyer votre écran, procédez comme suit : 1 Débranchez le câble d’alimentation.
2Utilisez le tissu fourni avec le moniteur ou tout autre tissu doux et sec pour dépoussiérer l’écran.
AVERTISSEMENT : ne nettoyez pas l’écran à l’aide d’un produit nettoyant contenant de l’alcool ou de l’acétone. Utilisez un produit destiné à nettoyer les écrans. Ne projetez jamais directement le produit nettoyant directement sur l’écran. Le produit risque de s’infiltrer à l’intérieur du moniteur et d’entraîner des dégâts.
Suivez ces consignes de sécurité lors de l’utilisation de votre moniteur :
ÂLe seul moyen de couper entièrement l’alimentation est de débrancher le câble d’alimentation. Ce faisant, veillez à tirer sur la prise et non sur le câble.
28 Français
ÂCoupez immédiatement l’alimentation si le câble d’alimentation est détérioré, si vous avez renversé un liquide sur le moniteur, ou si ce dernier est tombé ou a subi une détérioration.
AVERTISSEMENT : utilisez uniquement le câble d’alimentation fourni avec votre moniteur. Le câble d’alimentation est constitué d’une prise de terre à trois fils (une prise équipée d’une troisième broche reliée à la masse) que vous ne pouvez brancher qu’à une prise de courant alternatif. Si vous ne parvenez pas à insérer la fiche dans une prise parce que celle-ci n’est pas mise à la terre, contactez un électricien agréé qui se chargera de remplacer la prise par une prise mise à la terre adéquate.
AVERTISSEMENT : votre moniteur est un composant haute tension et ne doit être ouvert ou démonté sous aucun prétexte, même s’il est débranché. Si votre moniteur doit être révisé ou réparé, voir « Informations, services et assistance » à la page 32.
Veuillez trouver ci-après quelques recommandations pour régler votre moniteur pour réduire la luminosité et pour placer le moniteur de façon à respecter votre morphologie.
ÂDisposez le moniteur de façon à ce que la partie supérieure soit située légèrement en dessous de vos yeux lorsque vous êtes assis(e) devant le clavier de l’ordinateur. Il vous appartient de juger de la meilleure distance entre vos yeux et l’écran. Elle se situe en général entre 45 et 70 cm.
Français 29
ÂPositionnez le moniteur en le faisant pivoter vers le haut ou le bas pour limiter tout éblouissement ou reflet sur l’écran, notamment lorsque l’écran est placé sous un éclairage ou près d’une fenêtre.
Épaules |
|
Haut de l’écran au niveau |
détendues |
45–70 cm |
des yeux ou légèrement |
|
|
en dessous. (Vous devrez |
|
|
peut-être ajuster la hauteur |
Mains dans le |
|
du moniteur en surélevant |
|
votre plan de travail ou |
|
prolongement |
|
|
|
le moniteur lui-même.) |
|
des avant-bras |
|
|
|
|
|
|
|
Écran orienté de manière |
Avant-bras à |
|
à réduire les reflets |
l’horizontale ou |
|
|
légèrement relevés |
|
Espace dégagé sous |
|
|
|
Dossier soutenant |
|
le plan de travail |
|
|
|
la région lombaire |
|
Pieds à plat sur le sol |
|
|
|
|
|
ou sur un repose-pied |
Cuisses |
|
|
légèrement |
|
|
inclinées |
|
|
Pour en savoir plus sur la santé, la sécurité et l’entretien du moniteur, rendez-vous sur le site web d’Apple consacré à l’ergonomie à l’adresse www.apple.com/fr/about/ergonomics.
30 Français