9000 Overhead Projector
Illustrated Parts Breakdown
3M Visual Systems Division |
OHP Service Documentation Resource |
6801 River Place Boulevard |
Copyright © 2001, 3M IPC. All Rights Reserved |
Austin, Texas 78726-9000 |
78-6970-7536-0 |
Original Issue date: 1994
The release date, revision level, pages changed and a description of the modifications are listed below.
Revision |
Date |
Page(s) Changed |
Description |
Rev A |
1994 |
All pages |
First edition released |
Rev K |
8/2002 |
Section 14, |
New Roll Film Kit |
|
|
Page 41 |
|
|
|
|
|
NOTE 1: Blue text indicates a link to that page.
All rights reserved. No part of this book covered by the copyrights hereon may be reproduced or copied in any form or by any means-graphic, electronic, or mechanical, including photocopying, taping or information storage and retrieval systems-without written permission of 3M Visual Systems Division.
i
3M™Overhead Projector 9000 Series |
Illustrated Parts Breakdown |
This Illustrated Parts Breakdown (IPB) Manual contains the information necessary to locate and identify assemblies, sub-assemblies, and specific parts of the 9000 Series Overhead Projector.
All components available on a replacement basis are listed with their 3M identification number. The parts identification list opposite each illustration provides the description adequate to identify components. If the component is available only as part of the next higher assembly, the description column provides the next higher assembly description or identification number.
If physical appearance and general location of an item are known:
1.Use the IPB Section Titles to help determine which assembly or sub-assembly includes the item.
2.Refer to the view for the assembly or sub-assembly and locate the item on the exploded view. Match the part callout number to the corresponding number in the parts list.
3.Parts shown inside a dashed box can only be ordered as an assembly. Any part or mounting hardware shown outside the box is not included with the assembly.
Machine Identification Plate
The serial number plate for the 9000 is located on the bottom side of the projector. The Machine Identification Plate is divided into the following components:
1.Product Name: The specific version number of the projector.
2.Model Number/Alpha Code: The series number of the projector followed by a three or four character alpha code identifier. The Alpha Code indicates the design level, specific product characteristics, power cord or distribution specific to a country.
3.Lamp: The electrical rating of the lamp.
4.MFG Code: The MFG Code indicates the year and quarter the projector was built. (See the example to the right):
5.S/N: The serial number assigned to this projector.
Ordering Parts
When ordering parts, include the following information:
1.Machine model number and serial number.
2.Parts identification number.
3.Part description.
4.Quantity required.
MFG Code
|
Letter |
|
Digit |
E |
1997 |
1 |
Jan-Mar |
|
|
|
|
F |
1998 |
2 |
Apr-Jun |
|
|
|
|
H |
1999 |
3 |
Jul-Sep |
|
|
|
|
J- |
2000 |
4 |
Oct-Dec |
|
|
|
|
K |
2001 |
1 |
Jan-Mar |
|
|
|
|
For U.S. retail customers: Call 1-800-650-8429, or fax 1-800-650-9268. Dealers: Refer to Dealers Guide. 3M Subsidiaries: Contact Export Operations.
© 3M IPC 2001
3M™Overhead Projector 9000 Series |
Illustrated Parts Breakdown |
||
|
Table of Contents |
|
|
|
QUICK REFERENCE PARTS INDEX .................................................................................. |
|
1 |
0 |
OVERVIEW.......................................................................................................................... |
|
3 |
1 |
WIDE ANGLE (OPEN) 293MM HEAD ASSEMBLY.............................................................. |
|
4 |
2 |
ARTICULATE (CLOSED) HEAD ASSEMBLY ..................................... |
................................ |
6 |
3 |
TRIPLET AND VARIFOCAL (OPEN) HEAD ASSEMBLIES ................................................. |
8 |
|
4 |
ARM AND FOCUS ASSEMBLY ........................................................................................... |
|
10 |
5 |
TOP COVER........................................................................................................................ |
|
12 |
6 |
BASE ENCLOSURE ............................................................................................................ |
|
15 |
7 |
COOLING FAN .................................................................................................................... |
|
20 |
8 |
LAMP HOUSING - ENX SINGLE LAMP............................................................................... |
|
23 |
9 |
LAMP HOUSING - ENX/FXL DUAL LAMP........................................................................... |
|
25 |
10A |
LAMP HOUSING - EVD DUAL LAMP - 9550 (MFG CODE A3 AND EARLIER) ................... |
27 |
|
10B |
LAMP HOUSING - EVD DUAL LAMP - 9550 (MFG CODE A3 AND LATER)....................... |
29 |
|
11 |
LAMP HOUSING - FNT SINGLE LAMP ............................................................................... |
|
32 |
12A |
LAMP HOUSING - FNT DUAL LAMP (MFG CODE A3 AND EARLIER) .............................. |
34 |
|
12B |
LAMP HOUSING - FNT DUAL LAMP (MFG CODE A3 AND LATER) .................................. |
36 |
|
13 |
LAMPCHANGER AND HI/LO LAMP CONTROL MODULE (DUAL LAMP VERSIONS) ....... |
38 |
|
14 |
ROLL FILM KIT................................................................................................................... |
|
41 |
15 |
WIRE JUMPERS.................................................................................................................. |
|
42 |
16 |
SMALL ELECTRICAL PARTS KIT (EUROPE ONLY) ......................................................... |
|
47 |
17 |
SMALL MECHANICAL PARTS KIT (EUROPE ONLY) ........................................................ |
|
48 |
18 |
SMALL PLASTIC PARTS KIT (EUROPE ONLY) ................................................................ |
|
49 |
19 |
KIT FASTENERS 9000 SERIES (EUROPE ONLY) ............................................................ |
|
51 |
APPENDIX A SPECIFICATIONS..................................................................................................... |
|
A-1 |
IMPORTANT NOTICE
3M reserves the right to sell or furnish NEW OR RECONDITIONED PARTS. New and reconditioned parts are covered by the same 3M new parts limited warranty.
© 3M IPC 2001
3M™ Overhead Projector 9000 Series |
|
Illustrated Parts Breakdown |
|||||
|
Quick Reference Parts Index |
|
|
|
|
||
|
|
|
|
|
|
|
|
|
Description |
|
Part |
|
Figure |
Item |
|
|
|
|
Number |
|
No. |
No. |
|
|
BLADE, Fan |
78-8054-1823-9 |
7 |
5 |
|
||
|
|
|
|
|
|
||
|
CRADLE, Post (Folding Post) |
78-8079-8890-8 |
6 |
24 |
|
||
|
|
|
|
|
|
||
|
DIODE KIT, Inline |
78-8054-1836-1 |
7 |
16 |
|
||
|
|
|
|
|
|
||
|
FAN MOTOR ASSEMBLY (International) |
78-8054-1855-1 |
7 |
28 |
|
||
|
|
|
|
|
|
||
|
FAN MOTOR ASSEMBLY (U.S.) |
78-8114-9015-6 |
7 |
29 |
|
||
|
|
|
|
|
|
||
|
FOOT |
26-1008-5211-5 |
6 |
41 |
|
||
|
|
|
|
|
|||
|
FRESNEL LENS, Single Element, Glare Free, 182.9 mm |
78-8064-1645-5 |
5 |
8A |
|||
|
(9050, 9060, 9070, 9080, 9100 AABD, AJB, AJBW, AJBX, |
|
|
|
|
|
|
|
9200 AACD, AKC, AMD) |
|
|
|
|
|
|
|
|
|
|
|
|||
|
FRESNEL LENS, Dual Element, Clear, 182.5mm |
78-8079-9176-1 |
5 |
8B |
|||
|
(9075 AJG only) |
|
|
|
|
|
|
|
FRESNEL LENS, Dual Element, Glare Free, 182.5 mm |
78-8054-1236-4 |
5 |
8C |
|||
|
(9100 except AABD, AJB, AJBW and AJBX, 9200 except |
|
|
|
|
|
|
|
AACD and AJC) |
|
|
|
|
|
|
|
FRESNEL LENS, Dual Element, Clear, 174mm | |
78-8079-9045-8 |
5 |
8D |
|||
|
(9550 except ABAJ) |
|
|
|
|
|
|
|
FRESNEL LENS, Dual Element, Europe, Glare Free, |
78-8095-8353-3 |
5 |
8E |
|||
|
174mm (9550 ABHJ) |
|
|
|
|
|
|
|
GLASS, Exit, Articulate (293 mm Singlet Head) |
- |
- |
- |
2 |
4A |
|
|
|
|
|
|
|||
|
GLASS, Coated, Articulate (9075 AJG) |
78-8073-2982-2 |
2 |
4B |
|||
|
|
|
|
|
|||
|
GLASS, Stage (9050, 9060, 9070, 9075, 9080, 9100, 9200, |
78-8064-1473-2 |
5 |
6A |
|||
|
and 9550 Europe) |
|
|
|
|
|
|
|
GLASS, Stage (9550) |
78-8079-8975-7 |
5 |
6B |
|||
|
|
|
|
|
|
||
|
KNOB, Focus |
78-8064-1601-8 |
4 |
16 |
|
||
|
|
|
|
|
|||
|
LAMP, Projection, ENX, 82V, 360W |
78-8011-1186-1 |
8 |
9A |
|||
|
|
|
|
|
|||
|
LAMP, FXL (9200) |
78-8073-7100-6 |
9 |
13B |
|||
|
|
|
|
|
|
||
|
LATCH, Top Cover |
78-8079-8768-6 |
5 |
12 |
|
||
|
|
|
|
|
|
|
|
|
LENS, Triplet, (342 mm) (9200) |
- |
- |
- |
3 |
3 |
|
|
|
|
|
|
|
||
|
LENS, Varifocal, (270-325 mm) |
78-8073-3296-6 |
3 |
4 |
|
||
|
|
|
|
|
|||
|
LENS, Meniscus (355 mm) |
78-8011-1440-2 |
2 |
14B |
|||
|
|
|
|
|
|
||
|
LENS, Exit, Articulate (355 mm Doublet Head) |
78-8014-8812-9 |
2 |
5 |
|
||
|
|
|
|
|
|
||
|
LENS, Condenser (60mm) |
78-8079-9025-0 |
10A |
12 |
|
||
|
|
|
|
|
|
|
|
© 3M IPC 2001 |
1 |
3M™ Overhead Projector 9000 Series |
|
Illustrated Parts Breakdown |
|||||
|
Quick Reference Parts Index |
|
|
|
|
||
|
|
|
|
|
|
|
|
|
Description |
|
Part |
|
Figure |
Item |
|
|
|
|
Number |
|
No. |
No. |
|
|
MIRROR ASSEMBLY (Open Singlet) |
78-8057-4230-7 |
1 |
3 |
|
||
|
|
|
|
|
|
||
|
MIRROR ASSEMBLY (Doublet) |
78-8064-1457-5 |
2 |
17 |
|
||
|
|
|
|
|
|||
|
MIRROR ASSEMBLY, Triplet (9550 - Dark Grey, 4mm) |
78-8079-9227-2 |
3 |
12A |
|||
|
|
|
|
|
|||
|
MIRROR ASSEMBLY, Triplet (9200 - Black, 3mm) |
78-8079-9156-3 |
3 |
12B |
|||
|
|
|
|
|
|||
|
MOTOR, Fan (230 Volt) |
78-8079-8936-9 |
7 |
15A |
|||
|
|
|
|
|
|||
|
MOTOR, Fan (100 Volt) |
78-8079-8937-7 |
7 |
15B |
|||
|
|
|
|
|
|
||
|
RESISTOR, 1.2 Ohm (9050, 9060, 9070) |
78-8073-7127-9 |
8 |
14 |
|
||
|
|
|
|
|
|
||
|
SOCKET, Single lamp (ENX) |
78-8079-8820-5 |
8 |
8 |
|
||
|
|
|
|
|
|
|
|
|
SWITCH, Micro |
- |
- |
- |
7 |
7 |
|
|
|
|
|
|
|
||
|
SWITCH, Lampchanger/Hi/Lo, Dimmer |
78-8079-8855-1 |
13 |
8 |
|
||
|
|
|
|
|
|
||
|
THERMOSTAT, Safety (ENX) |
78-8079-8872-6 |
8 |
5 |
|
||
|
|
|
|
|
|
||
|
THERMOSTAT (9080/ENX, 9100/ENX, 9200/ENX, 9550) |
78-8079-8933-6 |
13 |
2 |
|
||
|
|
|
|
|
|
|
|
|
TRANSFORMER, EVD, Japan (9550) (100V) |
- |
- |
- |
6 |
16A |
|
|
|
|
|
|
|||
|
TRANSFORMER, Auto, EVD (120V) |
78-8079-9079-7 |
6 |
16B |
|||
|
|
|
|
|
|||
|
TRANSFORMER, EVD (220V) |
78-8079-8991-4 |
6 |
16C |
|||
|
|
|
|
|
|||
|
TRANSFORMER, FNT (100V) |
78-8079-8921-1 |
6 |
16D |
|||
|
|
|
|
|
|||
|
TRANSFORMER, FNT, Taiwan (120V) |
78-8079-9070-6 |
6 |
16E |
|||
|
|
|
|
|
|
|
|
|
TRANSFORMER, FNT, Indonesia (127/220V) |
- |
- |
- |
6 |
16F |
|
|
|
|
|
|
|||
|
TRANSFORMER, Auto, Hong Kong, Thailand (220/230V) |
78-8073-3009-3 |
6 |
16G |
|||
|
|
|
|
|
|||
|
TRANSFORMER, Auto (230/240V) |
78-8073-3010-1 |
6 |
16H |
|||
|
|
|
|
|
|||
|
TRANSFORMER, Auto, Australia, India, New Zealand, |
78-8073-3011-9 |
6 |
16I |
|||
|
South Africa (240/250V) |
|
|
|
|
|
|
|
TRANSFORMER, Brazil (127/220V) (9080 ABDB) |
- |
- |
- |
6 |
16J |
|
|
|
|
|
|
|||
|
LAMP, EVD |
78-8079-8791-8 |
9 |
13B |
|||
|
LAMP, FNT |
78-8054-1175-4 |
9 |
13B |
© 3M IPC 2001 |
2 |
3M™ Overhead Projector 9000 Series |
Illustrated Parts Breakdown |
|
|
|
|
Section 0. Machine Overview
SMALL ELECTRICAL PARTS KIT
(EUROPE ONLY)
(See Section 16)
SMALL MECHANICAL PARTS KIT
(EUROPE ONLY)
(See Section 17)
SMALL PLASTIC PARTS KIT
(EUROPE ONLY)
(See Section 18)
KIT FASTENERS 9000 SERIES
(EUROPE ONLY)
(See Section 19)
© 3M IPC 2001 |
3 |
3M™ Overhead Projector 9000 Series |
Illustrated Parts Breakdown |
|
|
|
|
Section 1.
Wide Angle (Open) 293mm Head Assembly
© 3M IPC 2001 |
4 |
3M™ Overhead Projector 9000 Series |
Illustrated Parts Breakdown |
|||||
|
|
|
Section 1. |
|
|
|
|
|
Wide Angle (Open) 293mm Head Assembly Parts List |
|
|
||
|
|
|
|
|
||
|
Item |
3M |
Description |
Qty. |
||
|
No. |
Part Number |
|
|
|
|
0 |
78-8079-9151-4 |
HEAD ASSEMBLY, Wide Angle (Open), 293mm Singlet |
3 |
|
||
|
1A |
78-8014-8951-5 |
LENS, Wide Angle (293mm) |
|
1 |
|
|
1B |
78-8073-2980-6 |
LENS, Wide Angle (Used on 9075 United States, 9085 United |
1 |
|
|
|
|
|
States plus AAWB, ABWB) |
|
|
|
|
|
|
|
|
|
|
2 |
78-8064-1646-3 |
TUBING, Lens |
|
3 |
|
|
3 |
78-8057-4230-7 |
MIRROR ASSEMBLY (Open Singlet) |
1 |
|
||
4 |
78-8064-1605-9 |
SPRING, Mirror Damping (Used on 9050 and 9080, except |
1 |
|
||
|
|
|
9080 AJD) |
|
|
|
|
|
|
|
|
|
|
5 |
(See Note 1) |
NUT, U-Type, 8-32 |
|
1 |
|
|
6 |
78-8079-8802-3 |
COVER, Head, Singlet |
|
1 |
|
|
7 |
(See Note 1) |
SCREW, Taptite, M3.5 X 8 |
|
1 |
|
|
8 |
(See Note 1) |
SCREW, Type BT, 8-18 X 7/16 |
|
1 |
|
|
9 |
(See Note 1) |
WASHER, Plain Nylon |
|
1 |
|
|
10 |
78-8079-8803-1 |
BRACKET, Lens, Singlet |
|
1 |
|
|
11 |
JV-0890-0185-1 |
LABEL, Caution, Japan (9050 ABAJ, 9080 ABDJ, 9200 ABCJ) |
1 |
|
Note 1: Order the 9000 Series Hardware Repair Kit (78-8054-1818-9). This kit contains a complete set of hardware for the 9000 Series O.H.P. *For Europe only, see Sections 16, 17, 18, and 19 for Parts Kits.
© 3M IPC 2001 |
5 |
3M™ Overhead Projector 9000 Series |
Illustrated Parts Breakdown |
|
|
|
|
Section 2.
© 3M IPC 2001 |
6 |
3M™ Overhead Projector 9000 Series |
Illustrated Parts Breakdown |
|||||
|
|
|
Section 2. |
|
|
|
|
|
Articulate (Closed) Head Assembly Parts List |
|
|
||
|
|
|
|
|
||
|
Item |
3M |
Description |
Qty. |
||
|
No. |
Part Number |
|
|
|
|
|
0A |
78-8079-9152-2 |
HEAD ASSEMBLY, Articulate (Closed), 293mm Singlet, Wide |
1 |
|
|
|
|
|
Angle |
|
|
|
|
|
|
|
|
|
|
|
0B |
78-8079-9153-0 |
HEAD ASSEMBLY, Articulate (Closed), 355mm Doublet |
1 |
|
|
|
0C |
78-8073-3115-8 |
HEAD ASSEMBLY, Articulate (Closed), Coated, 293mm |
1 |
|
|
|
|
|
Singlet, Wide Angle (9075 AJG) |
|
|
|
|
|
|
|
|
|
|
|
1A |
78-8064-1602-6 |
CLAMP, Dust Shield and Lens |
|
1 |
|
|
1B |
78-8054-1791-8 |
CLAMP, Dust Shield and Lens (Singlet) (Used on United |
1 |
|
|
|
|
|
States versions of: 9070, 9075, 9080 plus AADD, 9085) |
|
|
|
|
|
|
|
|
|
|
2 |
78-8064-1797-4 |
SHIELD, Dust (Short) |
|
1 |
|
|
3 |
78-8064-1562-2 |
HOUSING, Exit Lens |
|
1 |
|
|
|
4A |
78-8064-1650-5 |
GLASS, Exit, Articulate (293mm Singlet Head) |
1 |
|
|
|
4B |
78-8073-2982-2 |
GLASS, Coated, Articulate (9075 AJG) |
1 |
|
|
5 |
78-8014-8812-9 |
LENS, Exit, Articulate (355mm Doublet Head) |
1 |
|
||
|
6A |
78-8079-8805-6 |
COVER, Head, Doublet |
|
1 |
|
|
6B |
78-8079-9229-8 |
COVER, Head, Doublet, Xerox |
|
1 |
|
7 |
(See Note 1) |
SCREW, Taptite, M3.5 X 8 |
|
1 |
|
|
8 |
(See Note 1) |
SCREW, Taptite, M3 X 6 |
|
1 |
|
|
9 |
78-8014-8817-8 |
SPRING, Tension |
|
3 |
|
|
10 |
78-8064-1643-0 |
MOUNT, Lens (293mm Singlet Wide Angle) |
1 |
|
||
11 |
78-8079-8804-9 |
BRACKET, Lens, Doublet |
|
1 |
|
|
12 |
78-8011-1445-1 |
PIVOT |
|
1 |
|
|
13 |
78-8064-1646-3 |
TUBING, Lens |
|
2 |
|
|
|
14A |
78-8014-8951-5 |
LENS, Wide Angle (293mm) |
|
1 |
|
|
14B |
78-8011-1440-2 |
LENS, Meniscus (355mm) |
|
1 |
|
|
14C |
78-8073-2980-6 |
LENS, Wide Angle (9075 AJG) |
|
1 |
|
|
15A |
78-8064-1596-0 |
CLAMP, Lens (293mm Singlet Head) |
1 |
|
|
|
15B |
78-8064-1595-2 |
CLAMP, Lens (355mm Doublet Head) |
1 |
|
|
16 |
(See Note 1) |
SCREW, Plastite, 4-20 X 1/4 |
|
2 |
|
|
17 |
78-8064-1457-5 |
MIRROR ASSEMBLY (Doublet) |
|
1 |
|
|
18 |
JV-0890-0185-1 |
LABEL, Caution, Japan (9050 ABAJ, 9080 ABDJ, 9200 ABCJ) |
1 |
|
Note1: Order the 9000 Series Hardware Repair Kit (78-8054-1818-9). This kit contains a complete set of hardware for the 9000 Series O.H.P. *For Europe only, see Sections 16, 17, 18, and 19 for Parts Kits.
© 3M IPC 2001 |
7 |
3M™ Overhead Projector 9000 Series |
Illustrated Parts Breakdown |
|
|
|
|
Section 3.
Triplet and Varifocal Head Assemblies
© 3M IPC 2001 |
8 |
3M™ Overhead Projector 9000 Series |
Illustrated Parts Breakdown |
|||||
|
|
|
Section 3. |
|
|
|
|
|
Triplet and Varifocal Head Assemblies Parts List |
|
|
||
|
|
|
|
|
||
|
Item |
3M |
Description |
Qty. |
||
|
No. |
Part Number |
|
|
|
|
|
0A |
78-8079-9154-8 |
HEAD ASSEMBLY, Triplet (Open) (9200) |
1 |
|
|
|
0B |
78-8079-9155-5 |
HEAD ASSEMBLY, Varifocal (Open) (9550) |
1 |
|
|
|
0C |
TBD |
HEAD ASSEMBLY, Triplet (317mm) (9400) |
1 |
|
|
1 |
(See Note 1) |
NUT, U-Type, 8-32 |
|
2 |
|
|
2 |
(See Note 1) |
SCREW, Taptite, M3 X 6mm, Black, Zinc |
3 |
|
||
|
3A |
78-8097-3693-3 |
LENS, Triplet, High Resolution (342mm) (9200, 9400 AHRG) |
1 |
|
|
|
3B |
78-8014-8916-8 |
LENS, Triplet (317mm) (9400) |
|
1 |
|
4 |
78-8073-3296-6 |
LENS, Varifocal (270-325mm) |
|
1 |
|
|
5 |
78-8079-9014-4 |
ADAPTER, Lens (9550) |
|
1 |
|
|
6 |
(See Note 1) |
SCREW, Taptite, M3.5 X 8 |
|
2 |
|
|
7 |
(See Note 1) |
SCREW, Plastite, 4-20 X 1/4 BZN |
3 |
|
||
|
8A |
78-8079-9015-1 |
COVER, Head (9200, 9400) |
|
1 |
|
|
8B |
78-8079-9017-7 |
COVER, Head (9550) |
|
1 |
|
9 |
(See Note 1) |
SCREW, Type BT, 8-18 X 7/16 |
|
2 |
|
|
10 |
(See Note 1) |
WASHER, Plain, Nylon |
|
2 |
|
|
11 |
78-8079-9012-8 |
BRACKET, Lens (9550) |
|
1 |
|
|
|
12A |
78-8079-9227-2 |
MIRROR ASSEMBLY, Triplet (9550 - Dark Grey, 4mm) |
1 |
|
|
|
12B |
78-8079-9156-3 |
MIRROR ASSEMBLY, Triplet (9200, 9400 - Black, 3mm) |
1 |
|
Note 1: Order the 9000 Series Hardware Repair Kit (78-8054-1818-9). This kit contains a complete set of hardware for the 9000 Series O.H.P. *For Europe only, see Sections 16, 17, 18, and 19 for Parts Kits.
© 3M IPC 2001 |
9 |
3M™ Overhead Projector 9000 Series |
Illustrated Parts Breakdown |
|
|
|
|
Section 4.
© 3M IPC 2001 |
10 |
|
3M™ Overhead Projector 9000 Series |
Illustrated Parts Breakdown |
||||
|
|
|
Section 4. |
|
|
|
|
|
Arm and Focus Assembly Parts List |
|
|
||
|
|
|
|
|
|
|
|
Item |
3M |
|
Description |
Qty. |
|
|
No. |
Part Number |
|
|
|
|
|
0A |
DY-0210-2704-9 |
FOCUS ARM UPGRADE KIT (Europe only) |
1 |
|
|
|
0B |
78-8054-1821-3 |
FOCUS ARM UPGRADE KIT (All versions except 9550) |
1 |
|
|
|
|
|
(Includes items 1, 2, 3A, 4, 5, 6, 7, 9, 13, 14, 15, and 16) |
|
|
|
|
|
|
|
|
|
|
|
0C |
78-8073-2951-7 |
FOCUS ARM UPGRADE KIT (9550) (Includes items 1, 2, 9, |
1 |
|
|
|
|
|
17, 18, 22, and Focus Arm 78-8120-2942-5) |
|
|
|
|
|
|
|
|
|
|
|
1 |
(See Note 1) |
SCREW, Plastite, 6-19 X 1/2, BZN |
4 |
|
|
|
2 |
78-8120-2930-0 |
CAP, Focus Arm |
|
1 |
|
|
3A |
78-8079-8745-4 |
GEAR, Focus |
|
1 |
|
|
3B |
26-1009-4445-8 |
LUBRICANT (All versions) |
AR |
||
|
4 |
(See Note 1) |
SCREW, Shoulder |
|
2 |
|
|
5 |
26-1009-4515-8 |
SPRING, Compression |
2 |
|
|
|
6 |
78-8079-8747-0 |
BAR, Pressure |
|
1 |
|
|
7 |
78-8079-8743-9 |
CLAMP, Friction |
|
1 |
|
|
8 |
78-8079-8744-7 |
RACK, Focus |
|
1 |
|
|
9 |
(See Note 1) |
SCREW, Plastite, Sems, 8-11 X 5/8 |
2 |
|
|
|
10 |
(See Note 1) |
SCREW, Plastite, Sems, Hex Washer |
2 |
|
|
|
11 |
78-8079-8798-3 |
PLATE, Washer |
|
1 |
|
|
12 |
26-1009-3653-8 |
CAP, Post (22mm square) |
1 |
|
|
|
13 |
78-8120-2929-2 |
ARM, Focus, Plastic |
|
1 |
|
|
14 |
78-8120-2920-1 |
PLATE, Standoff |
|
1 |
|
|
15 |
78-8120-2925-0 |
PAD, Wear |
|
2 |
|
|
16 |
78-8064-1601-8 |
KNOB, Focus |
|
1 |
|
|
17 |
(See Note 1) |
SCREW, Plastite, 8-16 X 3/8, BZN |
2 |
|
|
|
18 |
78-8120-2933-4 |
CLAMP, Fixed Arm (9550) |
1 |
|
|
|
19 |
JV-0890-0183-6 |
LABEL, Caution, Japan |
1 |
|
|
|
|
|
(9050 ABAJ, 9080 ABDJ, 9200 ABCJ, 9550 ABHJ) |
|
|
|
|
|
|
|
|
|
|
|
20A |
78-8079-8759-5 |
POST, Fixed (9050, 9060, 9070, 9075, 9400) |
1 |
|
|
|
20B |
78-8079-9088-8 |
POST, Folding, Long |
(9080, 9100, 9200) |
1 |
|
|
20C |
78-8079-9089-6 |
POST, Folding, Long |
(9550) |
1 |
|
|
21 |
78-8054-1713-2 |
LABEL, Post, Japan (9050 ABAJ, 9080 ABDJ, 9550 ABHJ) |
1 |
|
Note 1: Order the 9000 Series Hardware Repair Kit (78-8054-1818-9). This kit contains a complete set of hardware for the 9000 Series O.H.P. *For Europe only, see Sections 16, 17, 18, and 19 for Parts Kits.
© 3M IPC 2001 |
11 |
3M™ Overhead Projector 9000 Series |
Illustrated Parts Breakdown |
|
|
|
|
Section 5.
© 3M IPC 2001 |
12 |
3M™ Overhead Projector 9000 Series |
Illustrated Parts Breakdown |
|||||
|
|
|
Section 5. |
|
|
|
|
|
|
Top Cover Parts List |
|
|
|
|
|
|
|
|
|
|
|
Item |
3M |
|
Description |
Qty. |
|
|
No. |
Part Number |
|
|
|
|
1 |
(See Note 1) |
SCREW, Plastite, 6-19 X 5/16 |
6 |
|
||
|
2A |
78-8120-2943-3 |
BRACKET, Hinge, Fresnel Lens, Dual Element |
1 |
|
|
|
|
|
(9075, 9085, 9100/FNT, 9200/FNT, 9400, 9550) |
|
|
|
|
2B |
78-8120-2941-7 |
BRACKET, Hinge Fresnel Lens, Single Element |
1 |
|
|
|
|
|
(9050, 9060, 9070, 9080, 9100/ENX, 9200/ENX) |
|
|
|
3 |
78-8073-2955-8 |
DOOR, Lamp Changer (9080, 9100, 9200) |
1 |
|
||
|
4A |
78-8073-2956-6 |
DOOR, Lamp Changer (9550) |
1 |
|
|
|
4B |
78-8095-8398-8 |
DOOR, Lamp Changer (9400) |
1 |
|
|
5 |
78-8079-9022-7 |
LABEL, Lamp Indicator |
(9550) |
1 |
|
|
|
6A |
78-8064-1473-2 |
GLASS, Stage (9050, 9060, 9070, 9075, 9080, 9100, 9200, |
1 |
|
|
|
|
|
9400, 9550 Europe), |
|
|
|
|
6B |
78-8079-8975-7 |
GLASS, Stage (9550) |
|
1 |
|
|
7A |
78-8054-1835-3 |
TOP COVER, 10.5″ (267mm) (without lamp changer door) |
1 |
|
|
|
|
|
(9050, 9060, 9070, 9075, 9080, 9085) |
|
|
|
|
7B |
78-8054-1837-9 |
TOP COVER, 10.5″ (267mm) (with lamp changer door) |
1 |
|
|
|
|
|
(9080, 9100, 9200 AACM, BGC) |
|
|
|
|
7C |
78-8054-1839-5 |
TOP COVER, A4 (9050) |
1 |
|
|
|
7D |
78-8054-1838-7 |
TOP COVER, A4 (9080, 9085, 9100, 9200) |
1 |
|
|
|
7E |
78-8054-1842-9 |
TOP COVER, A4 |
|
1 |
|
|
|
|
(All 9550 except AAHD, AAHT, and AHHM, AJH) |
|
|
|
|
7F |
78-8054-1840-3 |
TOP COVER, A4 (9550 AAHD, AAHT and AHHM, AJH) |
1 |
|
|
|
7G |
78-8073-3108-3 |
TOP COVER, A4 (9080 Indonesia) |
1 |
|
|
|
7H |
78-8073-3106-7 |
TOP COVER, A4 (9100 Indonesia) |
1 |
|
|
|
7I |
78-8073-3107-5 |
TOP COVER, A4 (9200 Indonesia) |
1 |
|
|
|
7J |
78-8054-1842-9 |
TOP COVER, A4 (9400 Korea and Europe) |
1 |
|
|
|
7K |
78-8079-9178-7 |
TOP COVER, A4, Kit (9550 outside U.S.) |
1 |
|
|
|
8A |
78-8064-1645-5 |
FRESNEL LENS, Single Element, Glare Free, 182.9mm |
1 |
|
|
|
|
|
(9050, 9060, 9070, 9080, 9100 AABD, AJB, AJBW, AJBX, |
|
|
|
|
|
|
9200 AACD, AKC, AMD) (Europe) |
|
|
|
|
8B |
78-8095-8353-3 |
FRESNEL LENS, Dual Element, Clear, 182.5mm |
1 |
|
|
|
|
|
(9075 AJG only) |
|
|
|
|
|
|
|
|
|
|
|
8C |
78-8054-1236-4 |
FRESNEL LENS, Dual Element, Glare Free, 182.5mm |
1 |
|
|
|
|
|
(9100 except AABD, AJB, AJBW and AJBX, 9200 except |
|
|
|
|
|
|
AACD and AJC) (Europe) |
|
|
© 3M IPC 2001 |
13 |
3M™ Overhead Projector 9000 Series |
Illustrated Parts Breakdown |
|||||
|
|
|
Section 5. |
|
|
|
|
|
|
Top Cover Parts List |
|
|
|
|
|
|
|
|
|
|
|
Item |
3M |
|
Description |
Qty. |
|
|
No. |
Part Number |
|
|
|
|
|
8D |
78-8079-9045-8 |
FRESNEL LENS, Dual Element, Clear, 174mm |
1 |
|
|
|
|
|
(9550 U.S. except ABHJ) |
|
|
|
|
|
|
|
|
|
|
|
8E |
78-8079-9176-1 |
FRESNEL LENS, Dual Element, Glare Free, 174mm |
1 |
|
|
|
|
|
(9550 ABHJ Europe) |
|
|
|
|
|
|
|
|
|
|
|
9A |
78-8079-8828-8 |
RETAINER, Fresnel Lens, Single Element |
1 |
|
|
|
9B |
78-8079-8830-4 |
RETAINER, Fresnel Lens, Dual Element |
1 |
|
|
10 |
78-8079-8939-3 |
LABEL, Caution (Lens) |
|
1 |
|
|
11 |
78-8005-0481-9 |
SPRING |
|
|
|
|
12 |
78-8079-8768-6 |
LATCH, Top Cover |
|
1 |
|
|
|
13A |
78-8079-8748-8 |
BUTTON, Power Switch, RED (All versions except 9550) |
1 |
|
|
|
13B |
78-8079-8974-0 |
BUTTON, Power Switch, PLUM (9550 except AHHK) |
1 |
|
|
|
13C |
78-8079-9165-4 |
BUTTON, Power Switch, Korea (9550 AHHK) |
1 |
|
|
14 |
78-8064-1515-0 |
ACTUATOR, Switch Button |
1 |
|
||
15 |
78-8079-8924-5 |
SHIELD, Heat, ENX Lamp |
1 |
|
||
|
16A |
78-8079-8918-7 |
SHIELD, Heat, FNT/EVD Lamp (all FNT and EVD versions |
1 |
|
|
|
16B |
78-8095-8339-2 |
SHIELD, Heat, EVD Lamp (9400, 9550 except AAHD, AAHT, |
1 |
|
|
17 |
78-8073-2965-7 |
BRACKET, Airflow (9400, 9550) |
1 |
|
||
18 |
(See Note 1) |
SCREW, Plastite, 6-19 X 3/8 |
2 |
|
||
19 |
JV-0890-0183-6 |
LABEL, Caution, Japan |
(9050, 9080, 9200, 9550) |
1 |
|
Note 1: Order the 9000 Series Hardware Repair Kit (78-8054-1818-9). This kit contains a complete set of hardware for the 9000 Series O.H.P. *For Europe only, see Sections 16, 17, 18, and 19 for Parts Kits.
© 3M IPC 2001 |
14 |
3M™ Overhead Projector 9000 Series |
Illustrated Parts Breakdown |
|
|
|
|
Section 6.
© 3M IPC 2001 |
15 |