Loading...
TI-5320sv
Texas Instruments U.S.A.
7800 Banner Drive
Dallas, Texas 75251
Texas Instruments Holland B.V.
Rutherfordweg 102
3542 CG Utrecht—The Netherlands
1998 Texas Instruments Incorporated
Getting Started
Installing the Paper Roll
1.Remove the printer compartment cover.
2.Lift the paper holder so that it extends behind the printer compartment.
3.Remove any packing materials from the printer compartment.
4.Replace the printer compartment cover.
5.Make sure the calculator is plugged into an electrical outlet.
6.Set the power switch on the right side of the calculator to on (P).
7.Place the paper roll on the paper holder.
8.Cut any jagged edges off the end of the paper.
9.Insert the end of the paper into the paper slot as shown. To avoid paper jams, use quality bond paper.
10. While feeding the paper into the slot, press and hold &.
Note To prevent damaging the printer (which may void the warranty), when operating the calculator without paper, move the PRINTER switch to OFF.
Replacing the 2-Color Ink Ribbon
1.Remove the paper roll and press & to run out any remaining paper.
2.Set the power switch on the right side of the calculator to off (S).
3.Remove the printer compartment cover.
4.Lift each ribbon spool until the ribbon is clear of the printer.
5.Lower the new ribbon (red side on the bottom) into the compartment and press down until it snaps into place.
1
6.Place the ribbon around the guides and along the paint drum as shown below.
7. Replace the printer compartment cover.
Key Descriptions
&Advances the paper.
2Clears the entire pending operation except the memory or the grand total.
/Prints a reference number or date without affecting calculations.
>Interprets the number in the display as a percentage.
IClears an entry or an error or overflow.
(Removes the last digit entered in the display.
!Changes the sign (+ or – ) of the displayed number.
"Computes the percentage of change between two values. (The price increase from 9.75 to 11.25 is 1.50 and the percentage increase is 15.38%.)
#Calculates the selling price and profit or loss amount on an item.
1Displays grand subtotal (GS) when pressed once. Displays grand total (GT) when pressed twice. Clears the grand total when pressed third time.
:Displays and prints the total, but does not clear the total.
EDisplays and prints the total and clears the total. Also resets the item counter (IC) to zero.
0Displays and prints the value in memory and clears the memory. Also clears M from the display and resets the memory item count to zero.
;Displays and prints the subtotal in memory but does not clear the memory.
2
Loading...