Product environmental attributes – THE ECO DECLARATION
The declaration may be published only when all rows and/or fields marked with an * are filled-in (n.a. for not applicable). Additional information regarding each item may be found under P14.
Brand * |
Sharp |
Logo |
Company name * |
Sharp Electronics (Europe) GmbH |
|
Contact information * |
umwelt.de@sharp.eu |
|
Internet site * |
www.sharp.eu |
|
Additional information |
|
|
The company declares (based on product specification or test results based obtained from sample testing), that the product conforms to the statements given in this declaration.
Type of product * |
MFP |
|
|
|
|
Commercial name * |
MX-3140N |
|
|
|
|
Model number * |
MX-3140N |
|
|
|
|
Issue date * |
2013-1-24 |
|
|
|
|
Intended market * |
Global |
Europe |
Asia, Pacific & Japan |
Americas |
Other |
Additional information |
|
|
|
|
|
This is an uncontrolled copy when in printed form. Please refer to the contact information for the latest version.
Quality Control |
Requirement met |
||
Item |
|
Yes |
No |
QC1 * |
The company enforces an internal quality control scheme to ensure the correctness of this eco declaration |
|
|
QC2 * |
The company is a member of an eco declaration system that enforces regular independent quality control |
|
|
|
such as organized by IT-Företagen (see www.itecodeclaration.org). |
|
|
Annex B of ECMA-370 4th edition Amended, February 2010
Page 1 (6)
Model number * |
MX-3140N |
|
|
Issue date * |
2013-1-24 |
Logo |
|
|
|
|
|
Product environmental attributes - Legal requirements |
Requirement met |
||
Item |
|
|
Yes No n.a. |
P1 |
Hazardous substances and preparations |
|
|
P1.1* |
Products do not contain more than; 0.1% lead, 0.01% cadmium, 0.1% mercury, 0.1% hexavalent chromium, |
||
|
0.1% polybrominated biphenyls (PBB) or 0.1% polybrominated diphenyl ethers (PBDE). (See legal |
||
|
reference and Note B1) |
|
|
P1.2* |
Products do not contain Asbestos (see legal reference). |
|
|
|
Comment: Legal reference has no maximum concentration value. |
||
P1.3* |
Products do not contain Ozone Depleting Substances: Chlorofluorocarbons (CFC), |
||
|
hydrobromofluorocarbons (HBFC), hydrochlorofluorcarbons (HCFC), Halons, carbontetrachloride, 1,1,1- |
||
|
trichloroethane, methyl bromide (see legal reference). Comment: Legal reference has no maximum |
||
|
concentration values. |
|
|
P1.4* |
Products do not contain more than; 0.005% polychlorinated biphenyl (PCB), 0.005% polychlorinated |
||
|
terphenyl (PCT) in preparations (see legal reference). |
|
|
P1.5* |
Products do not contain more than 0.1% short chain chloroparaffins (SCCP) with 10-13 carbon atoms in the |
||
|
chain containing at least 48% per mass of chlorine in the SCCP |
(see legal reference). |
|
P1.6* |
Textile and leather parts with direct skin contact do not contain Tri-(2,3,-dibromopropyl)-phosphate (TRIS), |
||
|
Tris-(aziridinyl)-phosphineoxide (TEPA), polybrominated biphenyl (PBB) (see legal reference). |
||
|
Comment: Legal reference has no maximum concentration values. |
||
P1.7* |
Textile and leather parts with direct skin contact do not contain more than 0.003% Azo colorants that split |
||
|
aromatic amines. (See legal reference and Note B1) |
|
|
P1.8* |
Wooden parts do not contain arsenic and chromium as a wood preservation treatment as well as |
||
|
pentachlorophenol and derivatives (see legal reference). |
|
|
|
Comment: Legal reference has no maximum concentration values. |
||
P1.9* |
Parts with direct and prolonged skin contact do not release nickel in concentrations above 0.5 |
||
|
microgram/cm2/week (see legal reference). |
|
|
|
Comment: Max limit in legal reference when tested according to EN1811:1998. |
||
P1.10* |
REACH Article 33 information about substances in articles is available at (add URL or mail contact): |
||
|
www.sharp.eu |
|
|
|
|
|
|
P2 |
Batteries |
|
|
P2.1* |
If the product contains a battery or an accumulator, it is labeled with the disposal symbol and if it contains |
||
|
more than 0.0005% of mercury (for button cells only) by weight, or more than 0.004% of lead, it shall be |
||
|
marked with the chemical symbol for the metal concerned, Hg or Pb. Information on proper disposal is |
||
|
provided in user manual. (See legal reference) |
|
|
P2.2* |
Button cells used in the product do not contain more than 2% by weight of mercury. Other batteries or |
||
|
accumulators do not contain more than 0.0005% of mercury or 0.002% of cadmium. (See legal reference) |
||
P2.3* |
Batteries and accumulators are easily removable by either users or service providers (as dependent on the |
||
|
design of the product). Exception: Batteries that are permanently installed for safety, performance, medical |
||
|
or data integrity reasons do not have to be “easily removable”. (See legal reference) |
||
P3 |
Safety, EMC connection to the telephone network and labeling |
|
|
P3.1* |
The product complies with legally required safety standards as specified (see legal reference). |
||
P3.2* |
The product complies with legally required standards for electromagnetic compatibility (see legal reference). |
||
|
|
||
P3.3* |
If product is intended for connection to a public telecom network or contains a radio transmitter, it complies |
||
|
with legally required standards for radio and telecommunication devices (see legal reference). |
||
P3.4* |
The product is labeled to show conformance with applicable legal requirements (see legal reference). |
||
|
|
|
|
P4 |
Consumable materials |
|
|
P4.1* |
If a photo conductor (drum, belt etc.) is used in the product, it does not contain cadmium max 0.01% (see |
||
|
legal reference and Note B1). |
|
|
P4.2* |
If ink/toner is used in the product, it does not contain cadmium max 0.1% by weight (see legal reference). |
||
|
|
||
P4.3* |
If the ink/toner formulation/preparation is classified as hazardous according to applicable regulations, the |
||
|
product/packaging is adequately labeled and a Safety Data Sheet (SDS) in accordance with these |
||
|
requirements is available (see legal reference). |
|
|
P5 |
Product packaging |
|
|
P5.1* |
Packaging and packaging components do not contain more than 0.01% lead, mercury, cadmium and |
||
|
hexavalent chromium by weight of these together. |
|
|
P5.2* |
Plastic packaging material is marked according to ISO 11469 referring ISO 1043 (see legal reference). |
||
P5.3* |
The product packaging material is free from ozone depleting substances as specified in the Montreal |
||
|
Protocol (see legal reference). |
|
|
|
Comment: Legal reference has no maximum concentration values. |
Note B1: Restriction applies to the homogeneous material, unless other specified and expressed in weight %.
|
|
Annex B of ECMA-370 4t h edition Amended, February 2010 |
Page 2 (6) |