Sharp MX-M264N User Manual

Product environmental attributes – THE ECO DECLARATION

The declaration may be published only when all rows and/or fields marked with an * are filled-in (n.a. for not applicable). Additional information regarding each item may be found under P14.

Brand *	Sharp	Logo
Company name *	Sharp Electronics (Europe) GmbH
Contact information *	[e-mail]
Internet site *	www.sharp.eu
Additional information

The company declares (based on product specification or test results based obtained from sample testing), that the product conforms to the statements given in this declaration.

Type of product *	MFP
Commercial name *	MX-M264N
Model number *	MX-M264N
Issue date *	2012-2-28
Intended market *	Global	Europe	Asia, Pacific & Japan	Americas	Other
Additional information

This is an uncontrolled copy when in printed form. Please refer to the contact information for the latest version.

Quality Control		Requirement met
Item		Yes	No
QC1 *	The company enforces an internal quality control scheme to ensure the correctness of this eco declaration
QC2 *	The company is a member of an eco declaration system that enforces regular independent quality control
	such as organized by IT-Företagen (see www.itecodeclaration.org).

Annex B of ECMA-370 4th edition Amended, February 2010

Page 1 (6)

Model number *	MX-M264N
Issue date *	2012-2-28	Logo

Product environmental attributes - Legal requirements		Requirement met
Item			Yes No n.a.
P1	Hazardous substances and preparations
P1.1*	Products do not contain more than; 0.1% lead, 0.01% cadmium, 0.1% mercury, 0.1% hexavalent chromium,
	0.1% polybrominated biphenyls (PBB) or 0.1% polybrominated diphenyl ethers (PBDE). (See legal
	reference and Note B1)
P1.2*	Products do not contain Asbestos (see legal reference).
	Comment: Legal reference has no maximum concentration value.
P1.3*	Products do not contain Ozone Depleting Substances: Chlorofluorocarbons (CFC),
	hydrobromofluorocarbons (HBFC), hydrochlorofluorcarbons (HCFC), Halons, carbontetrachloride, 1,1,1-
	trichloroethane, methyl bromide (see legal reference). Comment: Legal reference has no maximum
	concentration values.
P1.4*	Products do not contain more than; 0.005% polychlorinated biphenyl (PCB), 0.005% polychlorinated
	terphenyl (PCT) in preparations (see legal reference).
P1.5*	Products do not contain more than 0.1% short chain chloroparaffins (SCCP) with 10-13 carbon atoms in the
	chain containing at least 48% per mass of chlorine in the SCCP	(see legal reference).
P1.6*	Textile and leather parts with direct skin contact do not contain Tri-(2,3,-dibromopropyl)-phosphate (TRIS),
	Tris-(aziridinyl)-phosphineoxide (TEPA), polybrominated biphenyl (PBB) (see legal reference).
	Comment: Legal reference has no maximum concentration values.
P1.7*	Textile and leather parts with direct skin contact do not contain more than 0.003% Azo colorants that split
	aromatic amines. (See legal reference and Note B1)
P1.8*	Wooden parts do not contain arsenic and chromium as a wood preservation treatment as well as
	pentachlorophenol and derivatives (see legal reference).
	Comment: Legal reference has no maximum concentration values.
P1.9*	Parts with direct and prolonged skin contact do not release nickel in concentrations above 0.5
	microgram/cm2/week (see legal reference).
	Comment: Max limit in legal reference when tested according to EN1811:1998.
P1.10*	REACH Article 33 information about substances in articles is available at (add URL or mail contact):
	www.sharp.eu
P2	Batteries
P2.1*	If the product contains a battery or an accumulator, it is labeled with the disposal symbol and if it contains
	more than 0.0005% of mercury (for button cells only) by weight, or more than 0.004% of lead, it shall be
	marked with the chemical symbol for the metal concerned, Hg or Pb. Information on proper disposal is
	provided in user manual. (See legal reference)
P2.2*	Button cells used in the product do not contain more than 2% by weight of mercury. Other batteries or
	accumulators do not contain more than 0.0005% of mercury or 0.002% of cadmium. (See legal reference)
P2.3*	Batteries and accumulators are easily removable by either users or service providers (as dependent on the
	design of the product). Exception: Batteries that are permanently installed for safety, performance, medical
	or data integrity reasons do not have to be “easily removable”. (See legal reference)
P3	Safety, EMC connection to the telephone network and labeling
P3.1*	The product complies with legally required safety standards as specified (see legal reference).
P3.2*	The product complies with legally required standards for electromagnetic compatibility (see legal reference).
P3.3*	If product is intended for connection to a public telecom network or contains a radio transmitter, it complies
	with legally required standards for radio and telecommunication devices (see legal reference).
P3.4*	The product is labeled to show conformance with applicable legal requirements (see legal reference).
P4	Consumable materials
P4.1*	If a photo conductor (drum, belt etc.) is used in the product, it does not contain cadmium max 0.01% (see
	legal reference and Note B1).
P4.2*	If ink/toner is used in the product, it does not contain cadmium max 0.1% by weight (see legal reference).
P4.3*	If the ink/toner formulation/preparation is classified as hazardous according to applicable regulations, the
	product/packaging is adequately labeled and a Safety Data Sheet (SDS) in accordance with these
	requirements is available (see legal reference).
P5	Product packaging
P5.1*	Packaging and packaging components do not contain more than 0.01% lead, mercury, cadmium and
	hexavalent chromium by weight of these together.
P5.2*	Plastic packaging material is marked according to ISO 11469 referring ISO 1043 (see legal reference).
P5.3*	The product packaging material is free from ozone depleting substances as specified in the Montreal
	Protocol (see legal reference).
	Comment: Legal reference has no maximum concentration values.

Note B1: Restriction applies to the homogeneous material, unless other specified and expressed in weight %.

Annex B of ECMA-370 4t h edition Amended, February 2010	Page 2 (6)