Panasonic PT-53WX54, PT-47WX34, PT-47WX54 User Manual

HDTV Projection Monitor

Operating Instructions

Monitor de proyección de Alta Definición

Instrucciones de Operación

Téléprojecteur haute définition Manuel d’utilisation

PT-53WX54

PT-47WX54

PT-47WX34

TQB2AA0507-1 40301

PRINTED IN USA

IMPRESO EN EE.UU

IMPRIMÉ AUX ÉTATS-UNIS

WARNING

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrow head within a triangle is intended to tell the user that parts inside the product are a risk of electric shock to persons.

The exclamation point within a triangle is intended to tell the user that important operating and servicing instructions are in the papers with the appliance.

ENGLISH

The Class II insulation symbol (square within a square) indicates that this product has been evaluated and tested to comply with Class II insulation requirements.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. DO NOT PLACE ANY OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, ON THIS APPARATUS.

IMPORTANT SAFETY INSTRUCTIONS

1.Read these instructions.

2.Keep these instructions.

3.Heed all warnings.

4.Follow all instructions.

5.Do not use this apparatus near water.

6.Clean only with dry cloth.

7.Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8.Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9.Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10.Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11.Only use attachments/accessories specified by the manufacturer.

12.Use only with the cart, stand, tripod, bracket or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13.Unplug this apparatus during lightning storms or when unused for long periods of time.

14.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

IMPORTANT INFORMATION

Important Information

FCC CAUTION: ANY CHANGES OR MODIFICATIONS TO THIS TV RECEIVER NOT EXPRESSLY APPROVED BY MATSUSHITA ELECTRIC CORPORATION OF AMERICA COULD CAUSE HARMFUL INTERFERENCE, WHICH WOULD VOID THE USER’S AUTHORITY TO OPERATE THIS EQUIPMENT.

ENVIRONMENTAL NOTICE: THIS PRODUCT UTILIZES CATHODE RAY TUBES (CRT) AND OTHER COMPONENTS THAT CONTAIN LEAD. DISPOSAL OF THESE MATERIALS

MAY BE REGULATED IN YOUR COMMUNITY DUE TO ENVIRONMENTAL

CONSIDERATIONS. FOR DISPOSAL OR RECYCLING INFORMATION

PLEASE CONTACT YOUR LOCAL AUTHORITIES, OR THE ELECTRONICS INDUSTRIES ALLIANCE: <HTTP://WWW.EIAE.ORG.>

ENGLISH

The Energy Star label, a symbol for energy efficiency, was created by the U.S. Environmental Protection Agency (EPA) and the U.S. Department of Energy (DOE) to help customers identify products that can save them money and protect the environment by saving energy. Energy Star compliant products generally consume less energy than similar standard products.

Manufactured under license from BBE Sound, Inc.

Licensed by BBE Sound, Inc. under USP4638258, 5510752 and 5736897.

High Definition Sound BBE and BBE symbol are registered trademarks of BBE Sound, Inc.

BBE High Definition Sound restores clarity and presence for better speech intelligibility and music realism.

Read these instructions completely before operating television.

Contents are subject to change without notice or obligation.

Copyright 2004 by Matsushita Electric Corporation of America. All rights reserved.

Unauthorized copying and distribution is a violation of law.

1 z

IMPORTANT INFORMATION

Important Information (contd.)

		Information Regarding Convergence
		In the projection television, the image is formed by
		projecting 3 different color images (red, green and blue)
		onto the projection screen. Convergence refers to the
		alignment of red, green and blue images on the
		projection screen. When these images are properly
		aligned (converged), you see a sharp and vibrant color
		image. Sometimes, the three images may require
		alignment. This is due to the effect of earth’s magnetic field
	ENGLISH	on the projection tubes. Normally, adjustment is not
		necessary after the initial alignment at the center of the
		screen. It is possible to correct the color fringing on other
		areas of the screen by using the buttons on the remote
		control and by following the on-screen instructions in the
		set-up menu. Please converge the images before using the
		television for the first time. The following diagram shows
		examples of a misaligned image and a properly aligned
		image. Please refer to pages 28 and 29 for detailed
		procedure on how to adjust convergence.

Misconverged image

Properly aligned image

Notes:

•Make sure that the set is on for at least 20 minutes before adjusting convergence as described on pages 28 and 29.

•Convergence adjustment is independent for each format (480i, 1080i or zoom). Setting in one format does not affect the other.

Important Information Regarding The Use Of

Video Games, Computers, Or Other Fixed

Image Displays.

WARNING: The marking or retained image on the picture tube resulting from viewing fixed image is not an operating defect and as such is not covered by Warranty.

The projection television is designed to display constantly moving images on the screen. Continuous viewing of stationary images such as letterbox pictures on standard screen TVs (with top/bottom bars), nonexpanded standard (4:3) pictures on wide screen TVs (with side bars shown on each side of an image), stock market report bars (ticker running at the bottom of the screen), video game patterns, fixed scoreboards, bright station logos, on-line (Internet) or repetitive computer style patterns should be limited.

The extended use of fixed image program material can cause permanent picture tube damage, shown as a “shadow image” viewable on normal programs. This type of irreversible picture tube deterioration can be limited by performing the following steps:

•Limit the display of fixed image program material to no more than 15% of total viewing time per week.

•Turn the power off when not in use.

FCC INFORMATION

This equipment has been tested and found to comply with the limit for a Class B Digital Device in accordance with the specifications in Part 15 of the FCC Rules. The limits are designed to provide reasonable protection against radio and television interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications, However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause interference to radio or television reception (which you can determine by turning the equipment off and on), try to correct the interference by one or more of the following measures.

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and the receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

2 z

TABLE OF CONTENTS

Table of Contents

Important Information .....................................	1
Information Regarding Convergence..........................	2
Information Regarding The Use Of Video Games
Computers, Or Other Fixed Image Displays............	2
Customer Record........................................................	4
Care and Cleaning......................................................	4
Specifications..............................................................	4
Feature Chart..............................................................	4
Installation........................................................	5
Television Location .....................................................	5
Optional Cable Connections .......................................	5
AC Power Supply Cord...............................................	5
Cable / Antenna Connection.......................................	5
Remote Control Battery Installation ............................	5
Initial Set Up Menu .....................................................	6
Optional Equipment Connections..................	7
VCR ...........................................................................	7
Cable Box ..................................................................	7
VCR and Cable Box...................................................	7
Amplifier (TO AUDIO AMP) ........................................	8
Program Out Connection (PROG OUT) .....................	8
Digital TV - Set-Top Box (DTV-STB) or DVD Players	8
Front Control Panel.....................................................	8
DVI (Digital Visual Interface) input connection ...........	9
Special Remote Buttons .............................................	9
PIP And Split Operation .................................	10
PIP Operation ...........................................................	10
Split Operation ..........................................................	10
PIP and Split Operation With a Cable Box ...............	10
PIP And Split Operational Buttons................	10
TV/Video Button........................................................	10

Search Button..............................................................	10
Move Button ................................................................	11
PIP MIN and PIP MAX Buttons ...................................	11
Freeze Button.............................................................	11
Main Picture Freeze Feature.......................................	11
PIP, Split and Freeze Mode Buttons
Operational Chart .....................................................	11

	Remote Control Operation		ENGLISH
	(For model PT-47WX34 only).....................	12
	Operating Components with Remote Control	13
	Programming the Remote Control..............................	14
	Programming Without a Code ....................................	14
	Component Codes .....................................................	14
	Remote Control Operation (For models
	PT-47WX54 and PT-53WX54 only) ............	16
	Operating Components with Remote Control.............	17
	Programming the Remote Control..............................	19
	Programming Without a Code ....................................	19
	Component Codes .....................................................	20
	Basic Menu Navigation.................................	22
	Icon Menus Operation ..................................	23
	Picture ........................................................................	23
	Audio ..........................................................................	23
	Channels ....................................................................	24
	Timer ..........................................................................	24
	Lock............................................................................	25
	Set Up ........................................................................	28
	Troubleshooting Chart .................................	30
	Index...............................................................	31

Note: The warranty and service center information is located in the back of this manual.

3 z

CONGRATULATIONS

Congratulations

Your new Projection Television (PTV) features state-of-the- art technology for high quality picture and sound with complete audio/video connections for your home theater system. Your PTV is designed to give you many years of enjoyment. It was thoroughly tested and tuned at the factory for best performance.

Customer Record

		The model and serial number of this product are located on
		the back of the TV. You should note the model and serial
		number in the space provided and retain as a permanent
	ENGLISH	record of your purchase. This will aid in identification in the
		event of theft or loss. Product registration for U.S. customers
		is available at: www.prodreg.com/panasonic.
		Model
		Number

Serial

Number

Care and Cleaning

Projection Screen (Turn PTV Off)

The projection screen is a high precision lens system which has a protective screen. The protective screen is fully washable with the following precautions:

•Use a mild soap solution or window cleaner and a clean cloth.

•DO NOT USE ABRASIVE CLEANERS.

•Do not use laundry detergent or automatic dishwasher soap.

•Do not use alcohol, ammonia, or petroleum based products.

•Avoid excessive moisture and wipe dry.

•Prevent solution from running into the receiver below.

•Avoid bumping or scraping the screen.

Warning: Do not spray any type of cleaning fluid directly on the screen.

Cabinet and Remote Control

•For cabinets and remote control, use a soft cloth dampened with water or a mild detergent solution. Avoid excessive moisture and wipe dry.

•Do not use benzene, thinner or other petroleum based products.

Specifications

Specifications are subject to change without notice or obligation.

	Power Source
	PT-53WX54	(4.2A)	120V AC, 60Hz
	PT-47WX54	(4.2A)
	PT-47WX34	(4.2A)
	Channel Capability - 181		VHF-12; UHF-56; Cable-113
	Video Input Jacks		1Vp-p, 75 Ohm, Phono Jack Type
	Audio Input Jacks		500mV RMS 47K Ohm
	Video out jack		1Vp-p, 75 Ohm, Phono Jack Type
	Audio Output Jacks		0-2.0V RMS 4.7K Ohm
	DVI Input jack		1.0 compatible
	Component Input (Y / PB / PR)		75 Ohm, Phono Jack Type
	S-Video Input Jacks		S-Video (Y-C) Connector

Feature Chart

	MODELS	53WX54-PT	47WX54-PT	47WX34-PT
	FEATURES
	MENU LANGUAGE	•	•	•
	ENG/SPAN/FR
	PROTECTIVE SCREEN	•	•	•
	2 TUNER PIP / SPLIT	•	•	•
	2RF	•	•	•
	CLOSED CAPTIONING	•	•	•
	V-CHIP CAPABILITY	•	•	•
	DIGITAL SCAN RATE	1080i,	1080i,	1080i,
		480p	480p	480p
	NTSC LINE-DOUBLER	480p	480p	480p
	VIDEO NORM	•	•	•
	AUDIO NORM	•	•	•
	STEREO	•	•	•
	AI SOUND	•	•	•
	BASS/BALANCE/TREBLE	•	•	•
	SURROUND	•	•	•
	BBE	•	•	•
	A/V IN (REAR/FRONT)	4	4	4
		(3/1)	(3/1)	(3/1)
	AUDIO OUT	•	•	•
	DVI INPUT	•	•	•
	S-VHS INPUT	•	•	•
	COMPONENT INPUT	•	•	•

4 z

Incoming Cable from Home Antenna

75 Ohm VHF/UHF on back of TV

Incoming Cable from Cable Company

Installation

Television Location

This unit can be used as part of an entertainment center. Consult your dealer for available options.

•Avoid excessive sunlight or bright lights, including reflections.

•Keep away from excessive heat or moisture. Inadequate ventilation may cause internal component failure.

•Fluorescent lighting may reduce remote control transmitting range.

•Keep away from magnetic equipment, including motors, fans and external speakers.

Optional Cable Connections

Shielded audio and video cables should be used between components. For best results:

•Use 75-ohm coaxial shielded cables.

•Use appropriate input and output connectors, that match your component connectors.

•Avoid long cables to minimize interference.

AC Power Supply Cord

CAUTION: TO PREVENT ELECTRIC SHOCK,

MATCH WIDE BLADE OF PLUG TO WIDE SLOT

OF AC OUTLET AND FULLY INSERT. DO NOT Polarized plug USE A PLUG WITH A RECEPTACLE OR OTHER

OUTLET UNLESS THE BLADE CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.

PROTECT POWER CORDS FROM BEING WALKED ON, ROLLED OVER, CRIMPED, BENT, OR PINCHED, PARTICULARLY AT PLUGS, CONVENIENCE RECEPTACLES, AND THE POINT WHERE THEY EXIT FROM THE APPARATUS.

Cable / Antenna Connection

For proper reception, either a cable or antenna connection is required.

Cable Connection

Connect the cable supplied by your local

cable company to ANT1 connection on back of television. Select ANT1 and Cable

mode in SET UP menu.

Note: A cable converter box may be required for proper reception. Check with your local cable company for compatibility requirements.

Antenna Connection

For proper reception of VHF/UHF channels, an external antenna is required. For best reception an outdoor antenna is recommended.

• Connect home antenna to ANT1 connection on back of television. Select ANT1 and TV mode in the SET UP menu.

Note: Cable Mode is preset at the factory. Antenna users must change to TV Mode and ANT 1 in the Set Up menu.

INSTALLATION

Remote Control Battery Installation

Requires two AA batteries (supplied).

Battery Polarity

5A.
1 /	AA
AA / 1.
5A

1	2
	ENGLISH
	3

Procedure

1.Turn the remote control face down. Remove battery cover by pressing down on the marking on the cover and sliding it off in the direction indicated.

2.Install batteries matching (+) and (-) polarity signs.

3.Replace the battery cover by sliding in reverse until the lock snaps.

Note: Incorrect installation can cause battery leakage and corrosion that will damage the Remote Control.

Precautions

•Replace batteries in pairs.

•Do not mix battery types (zinc carbon with alkaline).

•Do not recharge, heat, short-circuit, disassemble, or burn batteries.

5 z

INITIAL SET UP MENU

Initial Set Up Menu

For your convenience, Auto Set up menu will be displayed on screen when the set is turned on for the first time. If needed, follow the menus and procedures for setting up the features.

IDIOMA/LANGUE

To change menu language to ENGLISH, SPANISH or FRENCH.

Procedure

ENGLISH

•Press VOL to select English, Spanish or French.

INITIAL SET UP

IDIOMA/LANGUE	ENGLISH
MODE	CABLE
AUTO PROGRAM
CONVERGENCE

PRESS ACTION TO EXIT

MODE

To select TV (antenna) or CABLE mode depending on the signal source.

Procedure

•Press VOL to select TV or CABLE.

INITIAL SET UP

IDIOMA/LANGUE	ENGLISH
MODE	CABLE
AUTO PROGRAM
CONVERGENCE

PRESS ACTION TO EXIT

AUTO PROGRAM

To automatically program all channels received through the RF input.

Procedure

•Press VOL to start Auto Programming.

INITIAL SET UP

IDIOMA/LANGUE	ENGLISH
MODE	CABLE
AUTO PROGRAM
CONVERGENCE

PRESS ACTION TO EXIT

CONVERGENCE

To adjust the center convergence, if needed.

Procedure

•Press VOL to display center Convergence adjustment menu.

•Refer to page 28 for setting Convergence, if needed.

INITIAL SET UP

IDIOMA/LANGUE	ENGLISH
MODE	CABLE
AUTO PROGRAM
CONVERGENCE

PRESS ACTION TO EXIT

6 z

OPTIONAL EQUIPMENT CONNECTIONS

Optional Equipment Connections

Note: The remote control must be programmed with supplied codes to operate the optional equipment.

VCR Connection

Follow this diagram when connecting your television to a VCR only.

			TERMINALS ON BACK OF PROJECTION TELEVISION
VCR
VIDEO OUT			VIDEO
			Y						DIGITAL
									IN
			PB				S-VIDEO
L
AUDIO OUT	ANT 1		PR					VIDEO
R									L
									AUDIO
Incoming			L L					L
Cable									R
	SPLIT OUT		R R	2				R
ANT OUT ANT IN			1
		AUDIO COMPONENT			INPUT	INPUT	INPUT	PROG	TO AUDIO
			VIDEO INPUT		1	2	3	OUT	AMP

ANT 2

CABLES NOT SUPPLIED

Viewing a television program

Procedure

•Select ANT1 in the SET UP menu.

•Tune the television to the program you want to view.

Viewing a video

Procedure

Option A

•Select ANT1 in the SET UP menu.

•Press the TV/VIDEO button on the remote control to select the video input (VIDEO 1, VIDEO 2, etc.) connected to your VCR.

•Begin the video.

Option B

•Select ANT2 in the SET UP menu.

•Tune the television to Channel 3 or 4, depending on your VCR.

•Begin the video.

Recording a television program

Procedure

Option A (Recording and viewing the same program)

•Select ANT2 in the SET UP menu.

•Tune the television to Channel 3 or 4, depending on your VCR.

•Using the VCR, tune to the television program you want to record.

•Begin recording.

Option B (Recording one program while viewing another program)

•Select ANT1 in the SET UP menu.

•Press the TV/VIDEO button on the remote control to select the video input (VIDEO 1, VIDEO 2, etc.) connected to your VCR.

•Using the VCR, tune to the television program you want to record.

•Begin recording.

•Press the TV/VIDEO button on the remote control to switch back to TV mode.

•Tune the television to the program you want to view.

Cable Box Connection

Follow this diagram when connecting your television to a cable box only.

TERMINALS ON BACK OF PROJECTION TELEVISION

CABLES NOT SUPPLIED

	Incoming
CABLE BOX	Cable
	ANT 1
ANT IN
ANT OUT	SPLIT OUT
	ANT 2

VIDEO
Y						DIGITAL
						IN
PB				S-VIDEO
PR						VIDEO
L						L
R						R
1	2
AUDIO COMPONENT		INPUT	INPUT	INPUT	PROG	TO AUDIO
VIDEO INPUT		1	2	3	OUT	AMP

Viewing a premium (scrambled) cable channel Procedure

L

AUDIO

R

ENGLISH

•Select ANT2 in the SET UP menu.

•Tune the television to Channel 3.

•Using the cable box, tune to the premium cable channel you want to view.

Note: To use special features such as Favorite Channels and Channel Captions ANT1 must be selected in the SET UP menu.

VCR and Cable Box Connection

Follow this diagram when connecting your television to both a VCR and a cable box.

VCR

VIDEO OUT
L
AUDIO OUT	ANT 1
R	Incoming
	Cable
ANT IN ANT OUT	SPLIT OUT

TERMINALS ON BACK OF PROJECTION TELEVISION

VIDEO
Y						DIGITAL
						IN
PB				S-VIDEO
PR						VIDEO
							L
L L						L	AUDIO
							R
R R	2					R
1
AUDIO COMPONENT		INPUT	INPUT	INPUT	PROG	TO AUDIO
VIDEO INPUT		1	2	3	OUT	AMP

	ANT 2
CABLE BOX	CABLES NOT INCLUDED

ANT OUT

ANT IN

Viewing a premium (scrambled) cable channel Procedure

•Select ANT2 in the SET UP menu.

•Tune the television to Channel 3.

•Using the cable box, tune to the premium cable channel you want to view.

Note: To use special features such as Favorite Channels and Channel Captions ANT1 must be selected in the SET UP menu.

7 z

OPTIONAL EQUIPMENT CONNECTIONS

Optional Equipment Connections (cont.)

VCR and Cable Box Connection (Cont.)

Note:

If the main picture signal is DVI or Component video

Recording a premium (scrambled) cable channel

input, no Program Out function is available.

Procedure

Procedure

• Connect optional

equipment to PROG OUT and TO

• Select ANT2 in the SET UP menu.

AUDIO AMP terminals. PROG OUT display is same as

•

Press the

TV/VIDEO button on the remote control to

onscreen display. See optional equipment manual for

select the video input (VIDEO 1, VIDEO 2, etc.)

further instructions for recording and monitoring.

connected to your VCR.

Digital TV - Set-Top Box (DTV-STB) or DVD

• Turn the VCR ON.

Connection

•

Tune the VCR to Channel 3 or 4, depending on the

ENGLISH

switch setting on the back of VCR.

This television is capable of displaying 1080i and 480p DTV

• Using your cable box, tune to the premium cable channel

signals when connected to a DTV tuner set-top-box (STB). In

you want to record.

order to view DTV programming, the STB must be connected

•

Begin recording.

to the component video inputs (Y,PB,PR) of the television. A

DTV signal must be available in your area. Select the output of

To view a different channel while recording:

the STB to either 1080i or 480p.

• Select ANT1 in the SET UP menu.

This television also utilizes a progressive scan doubler, which

• Press the TV/VIDEO button on the remote control to TV

de-interlaces the NTSC signal and progressively scans the

mode.

image. This allows you to sit close to the TV and not see the

•

Tune the

television to a program (except another

thin black horizontal lines (venetian blind effect) associated

premium cable channel).

with interlaced TV pictures.

Amplifier Connection (TO AUDIO AMP)

Use this diagram to connect the DTV-STB or DVD player to

To listen through a separate stereo system, connect an

the back of your projection television.

TERMINALS ON BACK OF PROJECTION TELEVISION

external audio amplifier TO AUDIO AMP outputs on back of

TERMINALS ON BACK OF DTV-STB OR DVD PLAYER

television.

VIDEO

DIGITAL

Note:

TO AUDIO AMP terminals cannot be connected directly

Y

S-VIDEO

IN

ANT 1

PB

to external speakers.

DIGITAL TV OUTPUT

PR

VIDEO

R-

Y

PB PR

L

MAIN

R

TERMINALS ON BACK OF PROJECTION TELEVISION

AUDIO

AUDIO

VIDEO

SPLIT OUT

R

-

R

VIDEO

L

R-AUDIO-L - VIDEO S-VIDEO

1

2

ANT 2

AUDIO COMPONENT INPUT INPUT

INPUT

PROG

TO AUDIO

Y

DIGITAL

IN

NTSC OUTPUT

VIDEO INPUT 1

2

3

OUT

AMP

ANT 1

PB

S-VIDEO

CABLES NOT SUPPLIED

		PR			VIDEO	EXTERNAL AMPLIFIER
						L	Note: There are two sets of three video iacks, Y, PB, and PR.
	SPLIT OUT					R
		L			L	AUDIO	Separate component color inputs provide luminance and
		1 2
		R			R
	ANT 2	AUDIO COMPONENT	INPUT INPUT INPUT PROG		TO AUDIO		color separation. Use the L (left)	and R (right) audio
		VIDEO INPUT	1 2	3 OUT	AMP
						CABLES NOT SUPPLIED	inputs.
	Audio Adjustments						Front Control Panel
	• Select SPEAKERS ON located in the onscreen AUDIO
		menu.					The front control panel can be used to access menus and
	• Set amplifier volume to minimum.						switch video mode when the remote control is not available.
	• Adjust television volume to desired level.						The ON/OFF indicator LED (red) will be lit when set is on.
	• Adjust amplifier volume to match the television.
	• Select SPEAKERS OFF & VARIABLE AUDIO OUT from						ON/OFF
		AUDIO menu.					INDICATOR
	•	Volume,	mute,	bass,		treble and balance are now	POWER VOLUME CHANNEL ACTION TV/VIDEO	S-VIDEO VIDEO 4 L - AUDIO - R
		controlled through the television.
	Note:	Select SPEAKERS OFF & FIXED AUDIO OUT to control
		audio functions through the external amplifier.					POWER ON/OFF
	Program Out Connection (PROG OUT)						A second VCR, Camcorder, a video disc player, video game
	To use the television audio and video with optional equipment,						equipment or DSS equipment can also be connected to the
	connect the PROG OUT and TO AUDIO AMP connections on the
							video inputs. See the optional equipment manual for details.
	back of the television.
							Procedure
		TERMINALS ON BACK OR PROJECTION TELEVISION

VIDEO						DIGITAL				•	Connect equipment to front Audio/Video input jacks.
Y				S-VIDEO		IN				•	Press TV/VIDEO button to select VIDEO 4 input mode.
PB							MONITOR		VCR
										•	Operate optional equipment as instructed in equipment
PR						VIDEO	L	OR
L						L	AUDIO				manual.
R						R	R
1	2
AUDIO COMPONENT INPUT INPUT INPUT					PROG	TO AUDIO
VIDEO INPUT		1	2	3	OUT	AMP
		CABLES NOT SUPPLIED

8 z

OPTIONAL EQUIPMENT CONNECTIONS

Optional Equipment Connections (cont.)

DVI (Digital Visual Interface) input connection

The DVI/HDCP1 input on your PTV can accommodate copy protected digital programming. The DVI/HDCP input

terminal complies with the EIA-861Profiles2 standard and is not intended for use with personal computers. The DVI/ HDCP input can be connected to an EIA/CEA 861 compliant consumer electronic device, such as a set top

box or DVD player equipped with a DVI output connection3.

The DVI/HDCP input is designed for best performance with HDTV signals, such as 1080i. The DVI/HDCP input will also accept and display 480i and 480p picture signals.

Notes:

1.DVI/HDCP = Digital Visual Interface / High-Bandwidth Digital Copy Protection.

2.EIA/CEA-861 Profiles compliance covers profiles for transmission of uncompressed digital video including high bandwidth digital content protection.

3.Consult your consumer electronics dealer for availability details.

Follow the diagram below to connect the PTV to a set top box or a DVD player.

TERMINALS ON BACK OF PROJECTION TELEVISION	DVI OUT JACKS ON BACK OF STB OR
	DVD PLAYER

			AUDIO OUT
VIDEO	DVI OUT	L	R
Y	DIGITAL
	IN
ANT 1
PB	S-VIDEO

	PR					VIDEO
							L
SPLIT OUT	L					L	AUDIO
							R
	R					R
ANT 2	1	2
	AUDIO COMPONENT		INPUT	INPUT	INPUT	PROG	TO AUDIO
	VIDEO INPUT		1	2	3	OUT	AMP

CABLES NOT SUPPLIED

Procedure

•Press TV/VIDEO button on the remote control to select DIGITAL-IN input.

•Connect the DVI output from the set top box or a DVD player to the DIGITAL IN input on the back of the PTV.

•Connect the Audio Out signal from the set top box or DVD player to the L and R Audio inputs associated with the DIGITAL IN input.

Special Remote Buttons

BBE Button

Press this button to turn BBE sound feature On or Off.

SAP Button

Press this button to let you cycle through different audio modes. For example:

•If receiving STEREO, SAP and MONO or receiving STEREO and MONO only, pressing SAP button, the audio will toggle as follows:

	STEREO	SAP	MONO		ENGLISH
ASPECT Button
Customer Options depending on Component Input Signal
INPUT	DISPLAY ON SCREEN			ASPECT BUTTON
SIGNAL				OPTIONS
1080i	16:9 only			No options
480p (16:9)	Default to 16:9			4:3, Full or Zoom (see
				below)
	Default to FULL mode.			4:3, Full or Zoom (see
480p (4:3)	Note: Will stretch picture
				below)
	horizontally.
480i	Default to JUST mode			4:3, Full, Just or
				Zoom (see below)

The ASPECT button on the remote control lets you choose one of four display modes, depending on the formats of the received signal and your preferences.

	ASPECT	Image on
Input Signal
		16:9 Screen Size

480i or 480p		4
	4:3	3

	ASPECT	Image on
Input Signal
		16:9 Screen Size

480i	or 480p	16
	ZOOM	9

This will display a 4:3 picture at its standard 4:3 size with gray side bars. (Not recommended for viewing 4:3 pictures as it may create a permanent image on screen if displayed for a prolonged period of time.)

This will expand the 4:3 picture uniformly (width and height) to full screen width and then reposition the picture vertically. (Recommended for letterbox pictures.)

Note: If menu is displayed while in Zoom mode, the aspect will change to Full to display complete menu.

Input Signal	ASPECT	Image on		This will show picture at full
		16:9 Screen Size		screen size. (Recommended
480i or 480p		16		for anamorphic pictures.)
	FULL		9
				This will stretch the right and
Input Signal	ASPECT	Image on		left edges of a 4:3 picture to
		16:9 Screen Size		fill the screen, The center of
480i		16		the screen will have aspect
	JUST		9	correction applied. The size
				of the picture will depend on
				the original signal.
				(Recommended for regular
				TV viewing.)

9 z

PICTURE IN PICTURE AND SPLIT OPERATION

Picture In Picture and Split Operation

Note:

The shapes of PIP

and

SPLIT function buttons

may vary

•

Press SPLIT to cancel Split screen.

depending on the remote control.

PIP Operation

PIP and Split Operation With a Cable Box

This television includes a two-tuner Picture In Picture (PIP)

To view premium (scrambled) cable channels through your

feature. This allows you to watch two (2) live broadcasts at

the same time with or without an external video source

cable box in the Main Picture:

such as a VCR, cable box, etc.

Note:

Use this procedure if you want to watch premium cable

Procedure

channels in the Main Picture while viewing a television

program or video in the PIP or Split frame.

• Connect incoming cable to ANT 1 input on back of TV.

ENGLISH

Procedure

PIP

or

on the remote control to display

•

Press

to display PIP frame.

•

Press

•

Select ANT 2 in the SET UP menu.

•

Select

channels

for

the

PIP

frame

by

pressing

•

Tune TV to Channel 3.

PIP CH

PIP

SPLIT

.

the PIP or Split frame.

•

Select

channels

for

the

Main

picture

by

pressing

	or	CH	Note:	Audio is from the Main Picture only.
			•	Verify the Cable box is ON.
	CH
	or use the remote control numeric keypad.		•	Choose channels for the Main Picture by tuning the
		SWAP		cable box.
	• Press		•	Choose channels for the PIP frame by pressing
		to switch the PIP and MAIN PICTURE
	source.			PIP CH
				.

•Press RECALL to view picture source status. Note: Swap is not available when using the cable box to tune

			PIP		channels. If your cable box has video output, it can be
	•	Press			connected to the TV to allow you to use all PIP or SPLIT
			to cancel PIP frame.
					functions. See the equipment manual for more
					information.

										Main Picture	PIP and Split Operational Buttons
											TV/VIDEO Button
									PIP Frame		Press when PIP or Split frame is displayed to select
											desired input mode.
Note: Audio is from Main Picture only.											Main Picture

Split Operation									CH #	COMPONENT1	COMPONENT2
This feature lets you watch two different channels side by										VIDEO 1/2/3/4	DIGITAL-IN
side with or without an external video source.
										PIP Frame
Procedure
	SPLIT								Main Picture
•	Press	to display Split screen.
•	Select	channels	for	the	Split	picture	by	pressing	CH #	COMPONENT1	COMPONENT2
	PIP CH									VIDEO 1/2/3/4	DIGITAL-IN
		.
•	Select channels		for	the	Main	picture	by	pressing		SPLIT Frame
		CH or use the remote control numeric keypad.
	or								Search Button (PIP and Split)
	CH

			SWAP	This feature lets you scan through all available channels.
	•	Press	to switch the SPLIT SCREEN and MAIN
				Procedure
		PICTURE source.
	•	Press	RECALL to view picture source status.	PIP		SPLIT
				• Press	or	to display PIP or Split frame.

10 z

PICTURE IN PICTURE AND SPLIT OPERATION

PIP Operation (cont.)

		SEARCH						FREEZE
		OPEN/CLOSE				•	Press	TV/VCR	to stop PIP or Split frame action.
•	Press				to display search frames.
								FREEZE
		SEARCH
						•	Press	TV/VCR	again to continue action.
•	Press	OPEN/CLOSE again to stop search feature. PIP or
								PIP	SPLIT
	Split frame channel will be the last active search frame.
						•	Press	or	to cancel PIP frame.
		PIP			SPLIT

•Press or to cancel PIP or Split frame

	2			Main Picture		ENGLISH
Main Picture	3	Search Frames
	4	Main Picture		PIP freeze frame	Split freeze frame
		Note:	Audio is from Main Picture only.

	Move Button (PIP only)			Main Picture Freeze Feature
	This feature is used to move PIP frame to one of four
				This feature is used to stop action of the Main Picture and
	corners.
				display it on a Split or PIP freeze frame.
	Procedure
				Procedure
			PIP
						FREEZE
	•	Press	to display PIP frame.
				•	To stop action for Main picture, press	TV/VCR
			MOVE			while
					PIP or Split frame is not displayed.
	•	Press	to position PIP frame to desired corner.
			PIP	• Main Picture freeze will be displayed in a PIP or Split
					frame, depending on the selection in the Freeze menu
	•	Press	to cancel PIP frame.
					located in Picture Other ADJ. section (refer to page 17).

			FREEZE
Main Picture	•	Press	TV/VCR	again	to	cancel	Main	Picture	freeze

PIP Frame

frame.

Note: While Main Picture freeze frame is displayed, only

MOVE button is active for PIP, all other PIP and Split

PIP MIN and PIP MAX Buttons

buttons have no effect

(see chart ).

While PIP frame is displayed, press PIP MIN or PIP MAX

PIP, Split and Freeze Mode Buttons Operational chart

button to vary the size of PIP frame.

This chart indicates the buttons that are operational with

Procedure

PIP, Split or Main Picture Freeze mode.

•

Press

PIP

to display PIP frame.

REMOTE

MAIN

PIP MODE

SPLIT MODE

PICTURE

PIP MIN

PIP MAX

BUTTONS

FREEZE

MODE

•

Press

or

to size PIP frame.

PIP

PIP MIN

Size Smaller

No Effect

No Effect

•

Press

to cancel PIP frame.

PIP MAX

Size Larger

No Effect

No Effect

FREEZE

Freeze PIP

Freeze Split

Display or

frame

Frame

Delete

MAX

Main Picture

PIP CH

Change

Change

No Effect

Channel

Channnel

MIN

SEARCH

Displays

Displays

No Effect

Search Frame

Search frame

PIP

Displays PIP

Displays PIP

No Effect

Freeze Button (PIP and Split)

Frame

frame

This feature is used to stop action in PIP or Split frame.

SPLIT

Displays Split

Displays Split

No Effect

Procedure

Frame

frame

PIP

SPLIT

MOVE

Move PIP

No Effect

Move PIP

•

Press

or

to display PIP or Split frame

Frame

Frame

SWAP

Swap with Main

Swap with

No Effect

Picture

Main Picture

11 z

REMOTE CONTROL OPERATION (FOR MODEL PT-47WX34 ONLY)

Remote Control Operation (For model PT-47WX34 only)

POWER

Press to turn ON and OFF.

SAP

Press to access audio modes (Stereo, SAP or Mono)

V T

VCR

DBS/CBL

DVD

VOL VOL

		Press to adjust TV sound and navigate in
	Press to select remote operation.	menus.
ENGLISH
	ACTION	Press to select next or previous channel and
		CH
		CH
	Press to access menus.
	MUTE	navigate in menus.
		RECALL
	Press to mute sound. Press to display and
	cancel CC (Closed Caption).	Press to display time, channel, sleep timer,
		and other options.
	TV/VIDEO	SEARCH
		GUIDE

Press to select TV or input modes.

SEARCH - Press for PIP or SPLIT search.

BBE

GUIDE - DBS functions button

MENU

EXIT

BBE - Press to turn on or off.

DBS functions button.

MENUPress to access DBS menus.

ASPECT

PROG

4

5

6

ASPECT - Select picture size (ratio) to match

programming format.

8

9

PROG - Press to enter minor number in a

0

compound number (DBS mode only).

*PIP MIN

*SPLIT

*PIP MAX

REW

PLAY

FF

Press numeric keypad to select any channel.

*SWAP

*MOVE

*PIP

PAUSE

STOP

REC

R-TUNE

EUR7613Z8B

TV/VCR

*PIP CH

VCR /DBS CH

*FREEZE

Press to switch to previously viewed

channel or input modes.

*Split and PIP function buttons Component function buttons

12 z

REMOTE CONTROL OPERATION (FOR MODEL PT-47WX34 ONLY)

Operating Components with Remote Control

Note: Refer to page 14 for programming Remote Control procedure.

Operating a VCR

Program the remote control to use with VCR.

	TO DO THIS...	PRESS
	Turn on/off	POWER
	Select TV Input mode for VCR	TV/VIDEO
	Change Channels up/down	VCR/DBS CH
	Record		REC
	Play	PLAY
	Stop	STOP
	Fast Forward		FF
	Rewind the Tape		REW
	Pause	PAUSE
	Change to TV or VCR Mode	TV/VCR
	On screen VCR Display	RECALL

Operating a CABLE BOX

Program the remote control to use with Cable Box.

TO DO THIS...	PRESS
Turn on/off	POWER

		1	2	3
	Select a Channel	4	5	6
		7	8	9
			0
	Change Channels Up/Down		CH
			CH
	Back to previous channel		R-TUNE

Operating a DBS
Program the remote control to use with DBS.
TO DO THIS...		PRESS
Turn on/off		POWER
Display DBS menu		MENU
		CH
Menu Navigation	VOL		VOL	ENGLISH
		CH
	1	2	3
Select a Channel	4	5	6
	7	8	9
		0
Program Information		RECALL

R-TUNE

Back to previous channel

Select next page up/down	VCR/DBS CH
Exit menus	EXIT
Display program Guide	GUIDE

Operating a DVD

Program the remote control to use with DVD

TO DO THIS...	PRESS
Turn on/off	POWER
Next/Previous Chapter	CH
	CH
DVD Display	RECALL

REW

Skip Search Reverse

FF

Skip Search Fast Forward

PLAY

Play

TV/VCR

DVD Open/Close

STOP

Stop

PAUSE

Still

VCR/DBS CH

Slow +/-

13 z

REMOTE CONTROL OPERATION (FOR MODEL PT-47WX34 ONLY)

Programming The Remote Control

The Universal Remote Control can be programmed to operate many manufacturers’ components, using the component function buttons for VCR, DVD, CABLE or DBS. Follow the procedures for programming your Remote Control with or without a code for the component.

Device		Operates		Default
TV		TV (Panasonic Only)		Panasonic Code
DBS/CBL		DBS STB & CBL STB (Preset)		Panasonic DBS Code

ENGLISH	VCR	VCR (Preset)	Panasonic Code
	Procedure		Panasonic Code
	DVD	DVD (Preset)
	Note:	Determine the manufacturer of the component and look
		in the table for the code (found on page 15).
	1.	Confirm that the external component is plugged in and
		operating.
	2.	Turn the component off.

ACTION

3. Press

and POWER together, for at least 5

seconds. After 5 seconds, the illuminated mode (component) buttons will begin to flash. Release the ACTION and POWER buttons.

4.Press appropriate component button on the Remote Control VCR, DVD, CABLE or DBS. The component button will illuminate steadily and all others will go out.

5.Enter the 3-digit component code using the Remote Control numeric keypad (0 ~ 9 buttons). The component button will blink twice.

6.Press the Remote Control POWER to test the

component. If the procedure was successful, the component will turn on and the component key will blink twice and then go out.

Note: If the component does not operate with the Remote Control, repeat the steps 3 through 6 using another code (some brands have multiple codes). If an incorrect code is entered, or if the procedure takes longer than 30 seconds, the programming will fail.

Programming Without A Code

This procedure searches all codes and is called the “sequence method.”

1.Confirm that the external component is plugged in and on.

2.Turn the component off.

ACTION

3. Press

and POWER together, for at least 5

seconds. After 5 seconds, the illuminated mode (component) buttons will begin to flash. Release the ACTION and POWER buttons.

4.Press appropriate component button on the Remote Control. The component button will illuminate steadily and all others will go out.

5. Press the POWER button to set the remote control into the step and set mode.

6.Point the remote control towards the component.

7.Press VOL (the mode key will blink three times), then press the Remote Control POWER button to test the

component. Continue this process until the proper code is found. If the procedure was successful, the component will turn on.

Note:	Each time you press the VOL button, make sure that the
	component key blinks twice before pressing the POWER
	button.
8.	Once the device responds, press	ACTION
		to store the

code. The mode (component) button will blink twice.

Note: It may take many attempts before	the correct code
is found. If you miss a code, press	VOL, then press

the POWER button to test the component.

Component Codes

The Universal Remote Control is capable of operating many component brands after entering a code. Some components may not operate because the codes are not available due to limited memory. The Universal Remote Control does not control all features found in each model.

Write the code numbers from tables in this space. This will serve as a reference if you need to program your Remote Control.

VCR				CABLE				DVD

DBS

14 z

REMOTE CONTROL OPERATION (FOR MODEL PT-47WX34 ONLY)

Component Codes (cont.)

Codes For VCR

	Brand	Code
	Admiral	335
	Aiwa	332
	Akai	314, 315, 316, 329
	Audio	311, 339
	Dynamic
	Bell & Howell	305, 313
	Broksonic	320, 326
	Canon	323, 325
	CCE	343
	Citizen	306
	Craig	305, 306, 329
	Curtis	324, 345
	Mathes
	Daewoo	301, 324, 343
	DBX	310, 311, 339
	Dimensia	345
	Emerson	303, 319, 320, 325,
		326, 343
	Fisher	305, 307, 308, 309,
		313
	Funai	320, 326, 334
	GE	324, 333, 345
	Goldstar	306
	Gradiente	334
	Hitachi	300, 323, 345
	Instant	323, 324
	Replay
	Jensen	339
	JVC	310, 311, 334,339
	Kenwood	306, 310, 311, 339
	LXI	300, 305, 306,307,
		308, 309
	Magnavox	323, 324, 331
	Marantz	310, 311, 339
	Marta	306
	Memorex	309, 324
	MGA	338, 340, 341,
		347,348
	Minolta	300, 345
	Mitsubishi	338, 340, 341, 347,
		348
	Multitech	304, 347
	NEC	310,311, 334, 339
	Olympic	323, 324
	Optimus	306, 321, 328, 335
	Orion	320, 326
	Panasonic	321,322, 323, 324
	Penney	300,305, 310, 311,
		324, 339, 345
	Pentax	300,311, 345

Codes For VCR (Contd.)

	Brand	Code
	Philco	320, 323, 324, 326,
		331, 343
	Philips	323, 324, 331
	Pioneer	323
	Proscan	300, 301, 302, 323,
		324, 331, 333, 345,
		346
	Quasar	321, 322, 323, 324
	Radio Shack	305, 309, 324, 333,
		336, 340
	RCA	300, 301,302, 323,
		324, 331, 333, 345,
		346
	Realistic	305, 309, 324, 336,
		340
	Samsung	302, 304, 333
	Sansui	320, 326, 339, 352
	Sanyo	305, 309, 313
	Scott	301, 302, 304, 309,
		320, 326, 338, 340,
		347, 348
	Sears	300, 305, 306, 307,
		308
	Sharp	335, 336
	Shintom	317
	Signature	335
	2000
	Singer	337
	Sony	328, 329, 330
	Sylvania	331, 324, 331
	Tashiro	306
	Tatung	310, 311, 339
	Teac	310, 311, 339
	Technics	321, 322, 323, 324
	Teknika	324
	Toshiba	301, 346
	Vector	311
	Research
	Wards	306, 309, 335, 336,
		344
	Yamaha	305, 310, 311, 339
	Zenith	306,344

Codes For Cable Box

	Brand	Code
	ABC	224
	Archer	225, 232
	Cableview	205, 232
	Citizen	205, 222
	Curtis	212, 213
	Diamond	224, 225,
		232
	Eagle	229
	Eastern	234
	GCbrand	205, 232
	Gemini	222
	General	211, 219,
		220, 221,
	Instrument/	222, 224,
	Jerrold	225, 226,
		227
		212, 218,
	Hamlin	240, 241,
		242, 245
	Hitachi	203, 224
	Macom	203, 204,
		205
	Magnavox	233
	Memorex	230
	Movietime	205, 232
	Oak	202, 237,
		239
	Panasonic	209, 210,
		214
		206, 207,
	Philips	228, 229,
		230
	Pioneer	201, 216
	Pulsar	205, 232
	Puser	232
	RCA	215
	Realistic	232
		212, 218,
	Regal	240, 241,
		242, 245,
		249
	Regency	234
	Rembrandt	205, 232,
		237
	Samsung	205
	Scientific Atlanta	211, 212,
		213
	Slmark	201, 205
	Sprucer	205, 210
	Stargate	205, 210
	Teleview	201, 205
	Texscan	244
	Tocom	235
	Toshiba	204
	Unika	225, 232

Codes For Cable Box (Contd.)

	Brand	Code
	Universal	222, 232
	Videoway	206
	Viewstar	229, 230
	Zenith	200, 217
	Zenith/.Drake	200
	Satellite
	Codes For DBS

	Brand	Code
	Dish Network	105, 115, 116
	(Echostar)
	Echostar	105
	Express VU	105, 115
	G. E.	106
	G.I. (General	108
	Instrument)
	Gradiente	114
	Hitachi	103, 111,
		112
	HNS (Hughes)	103
	Magnavox	101, 102
	Panasonic	104
	Philips	101, 102
	Primestar	108
	Proscan	106, 109, 110,
		113
	RCA	106, 109,
		110, 113
	Sony	107
	Star Choice	103, 108
	Toshiba	100
	Uniden	101, 102
	Codes For DVD

Brand	Code
Denon	100
Ferguson	101
JVC	109
Mitsubishi	105
Nordmende	101
Panasonic	100
Philips	103
Pioneer	102
RCA	101
Saba	101
Samsung	110
Sharp	108
Sony	104
Technics	100
Thomson	101
Toshiba	103
Yamaha	100
Zenith	107

ENGLISH

15 z

REMOTE CONTROL OPERATION (FOR MODELS PT-47WX54 AND PT-53WX54 ONLY)

Remote Control Operation (For models PT-47WX54 and PT-53WX54 only)

ENGLISH

POWER

Press to turn ON and OFF.

MUTE

Press to mute sound. Press to display and cancel CC (Closed Caption).

	D	A	UX
	DV				R
	R
C					C
V						V
	TV	C					R
		B		L
	D				D
	V				B
						S
T

Press to select remote operation.

ACTION

Press to access menus.

VOL VOL

Press to adjust TV sound and navigate in menus.

BBE

MENU

BBE - Press to turn on or off.

MENU - Press to access DBS or DVD menus.

EXIT

DBS functions button.

ASPECT

Select picture size (ratio) to match programming format.

4 5 6 8 9 0

Press numeric keypad to select any channel.

R-TUNE

Press to switch to previously viewed channel or input modes.

EUR7603Z9A

TV/VIDEO

Press to select TV or input modes.

SAP

Press to access audio modes (Stereo, SAP or Mono).

LIGHT

Press to illuminate remote buttons.

CH

CH

Press to select next or previous channel and navigate in menus.

RECALL

Press to display time, channel, sleep timer, and other options.

GUIDE

DBS functions button.

PAGE

DBS page up/down and DVD skip -/+ buttons.

PROG

Press to enter minor number in a compound number.

*PIP MIN

PLAY

*PIP MAX

REW

FF

PAUSE

STOP

REC

*FREEZE

*PIP CH

*SEARCH

TV/VCR

VCR CH

OPEN/CLOSE

*PIP

*SPLIT *MOVE

*SWAP

*Split or PIP function buttons Component function buttons

16 z

REMOTE CONTROL OPERATION (FOR MODELS PT-47WX54 AND PT-53WX54 ONLY)

Operating Components with Remote Control

Note: Refer to page 19 for programming Remote Control procedure.

Operating a VCR

Program the remote control to use with VCR.

	TO DO THIS...	PRESS
	Turn on/off	POWER
	Select TV Input mode for VCR	TV/VIDEO
		PIP CH
	Change Channels up/down	VCR CH
	Record		REC
	Play	PLAY
	Stop	STOP
	Fast Forward		FF
	Rewind the Tape		REW
	Pause	PAUSE
	Change to TV or VCR Mode	TV/VCR
	On screen VCR Display	RECALL

Operating a CABLE BOX

Program the remote control to use with Cable Box.

TO DO THIS...	PRESS
Turn on/off	POWER

		1	2	3
	Select a Channel	4	5	6
		7	8	9
			0
	Change Channels Up/Down		CH
			CH
	Back to previous channel		R-TUNE
	Exit menus		EXIT

Operating a DBS
Program the remote control to use with DBS.
TO DO THIS...		PRESS
Turn on/off		POWER
Display DBS menu		MENU
DBS ASPECT		ASPECT
				ENGLISH
		CH
Menu Navigation		VOL	VOL
		CH
	1	2		3
Select a Channel	4	5		6
	7	8		9

0

Program Information	RECALL
Back to previous channel	R-TUNE
Select next page up/down	PAGE
	PIP CH
Channel Up/Down	VCR CH
Exit menus	EXIT
Display program Guide	GUIDE

Operating a DVD

Program the remote control to use with DVD.

TO DO THIS...	PRESS
Turn on/off	POWER
Next/Previous Chapter	CH
	CH
DVD Display	RECALL

REW

Skip Search Reverse

FF

Skip Search Fast Forward

PLAY

Play

OPEN/CLOSE

DVD Open/Close

17 z

REMOTE CONTROL OPERATION (FOR MODELS PT-47WX54 AND PT-53WX54 ONLY)

	Operating a DTV Set Top Box
	Program the remote control to use with DTV.
	TO DO THIS...		PRESS
	Turn on/off		POWER
	DTV ASPECT		ASPECT
		1	2	3
	Select a Channel	4	5	6
		7	8	9
ENGLISH
			0
	Navigation Left / Right		VOL	VOL
	Back to previous channel		R-TUNE
	Exit menus		EXIT

Operating a Cassette Deck

To operate a cassette deck, the remote control must be in AUX mode and be programmed with the appropriate code for your equipment.

	TO DO THIS...	PRESS
	Turn on/off		POWER
	Receiver Volume Up/Down	VOL		VOL
	Deck A/B	R-TUNE
	Record		REC
	Play		PLAY
	Stop		STOP
	Fast Forward		FF
	Rewind the Tape		REW
	Pause	PAUSE

Operating a Receiver

Program the remote to operate audio receiver.

	TO DO THIS...	PRESS
	Turn on/off	POWER
	Audio Mute	MUTE
	RCVR. VOL Up/Down	VOL	VOL
	Tuner Pre-set stations Up/	CH
	Down	CH

	TO DO THIS...	PRESS
		Press Remote numeric
		keypad
		AV 1	Press 1
		AV 2	Press 2
		AV 3	Press 3
	To select AV Inputs or	AV 4	Press 4
		CD	Press 5
	Components:
		TUNER	Press 6
		PHONO	Press 7
		TAPE	Press 8
		AUX	Press 9
	Surround VOL Down	PIP MAX
	Surround VOL UP	PIP MAX
	Center CH VOL Up/Down	VCR CH

Operating a PVR (Personal Video Recorder)

Program the remote control to use with a PVR.

	TO DO THIS...		PRESS
	Turn on/off		POWER
	PVR Navigation		CH
			VOL		VOL
			CH
		1	2		3
	Select a Channel	4	5		6
		7	8		9
			0
	Play		PLAY
	Record		REC
	Pause		PAUSE
	Back to previous channel		R-TUNE
	Exit menus		EXIT
	PVR Guide		GUIDE
	Replay Zones		R-TUNE
	Quick Skip		OPEN/CLOSE
	Return to live		PROG

18 z

REMOTE CONTROL OPERATION (FOR MODELS PT-47WX54 AND PT-53WX54 ONLY)

Programming The Remote Control

The Universal Remote Control can be programmed to operate many manufacturers’ components, using the component function buttons for VCR, DVD, AUX, RCVR, TV, DTV CABLE or DBS. Follow the procedures for programming your Remote Control with or without a code for the component.

Default Modes for Remote Control

Device		Operates		Default
TV		TV (Panasonic Only)		Panasonic TV Code
DTV-STB		DTV (Panasonic Only)		Panasonic DTV Code
CABLE		CABLE (Preset)		Panasonic CABLE
				Code
DBS		DBS (Preset)		Panasonic DBS Code
VCR		VCR (Preset0		Panasonic VCR Codes
DVD/CD		DVD and CD (Preset)		Panasonic DVD Codes
AUX		Personal Video Recorders,		Panasonic Personal
		Tape and VCR2		Video Recorder Code
RCVR		Audio receiver (Preset)		Panasonic RCVR code

Note: Determine the manufacturer of the component and look in the table for the code.

Programming with a Code

Procedure

1.Confirm that the external component is plugged in and operating.

2.Turn the component off.

ACTION

3. Press

and POWER together, for at least 5

seconds. After 5 seconds, the illuminated mode (component) buttons will begin to flash. Release the ACTION and POWER buttons.

4.Press appropriate component button on the Remote Control VCR, DVD (CD), AUX (VCR2 or TAPE), RCVR, DTV, CABLE or DBS. The component button will illuminate steadily and all others will go out.

5.Enter the 3-digit component code using the Remote Control numeric keypad (0 ~ 9 buttons). The component button will blink twice.

6.Press the Remote Control POWER to test the

component. If the procedure was successful, the component will turn on and the component key will blink twice and then go out.

Note: If the component does not operate with the Remote Control, repeat steps 3 through 6 using another code (some brands have multiple codes). If an incorrect code is entered, or if the procedure takes longer than 30 seconds, the programming will fail.

Programming without a Code

This procedure searches all codes and is called the “sequence method.”

1.Confirm that the external component is plugged in and on.

2.Turn the component off.

ACTION

3. Press

and POWER together, for at least 5

	seconds. After 5 seconds, the illuminated mode
	(component) buttons will begin to flash. Release			the	ENGLISH
	ACTION and POWER buttons.
4.	Press appropriate component button on the Remote
	Control. The component button will illuminate steadily
	and all others will go out.
5.	Press the	POWER	button to set the remote control into

the step and set mode.

6.Point the remote control towards the component.

7.Press VOL (the mode key will blink three times), then press the Remote Control POWER button to test the

component. Continue this process until the proper code is found. If the procedure was successful, the component will turn on.

Note:	Each time you press the VOL button, make sure that the
	component key blinks twice before pressing the POWER
	button.
8.	Once the device responds, press	ACTION
		to store the

code. The mode (component) button will blink twice.

Note: It may take	many attempts before	the correct code
is found. If you miss a code, press		VOL, then press
the POWER	button to test the component.

Component Codes

The Universal Remote Control is capable of operating many component brands after entering a code. Some components may not operate because the codes are not available due to limited memory. The Universal Remote Control does not control all features found in each model.

Write the code numbers from tables in this space. This will serve as a reference if you need to program your Remote Control.

VCR

DVD

DVD (CD)

AUX (VCR2)

AUX (TAPE)

RECEIVER

DTV				CABLE				DBS

19 z

REMOTE CONTROL OPERATION (FOR MODELS PT-47WX54 AND PT-53WX54 ONLY)

Component codes

ENGLISH

Codes For VCR

	Brand	Code
	Admiral	335
	Aiwa	332
	Akai	314, 315, 316, 329
	Audio	311, 339
	Dynamic
	Bell & Howell	305, 313
	Broksonic	320, 326
	Canon	323, 325
	CCE	343
	Citizen	306
	Craig	305, 306, 329
	Curtis	324, 345
	Mathes
	Daewoo	301, 324, 343
	DBX	310, 311, 339
	Dimensia	345
	Emerson	303, 319, 320,
		325, 326, 343
	Fisher	305, 307, 308,
		309, 313
	Funai	320, 326, 334
	GE	324, 333, 345
	Goldstar	306
	Gradiente	334
	Hitachi	300, 323, 345
	Instant	323, 324
	Replay
	Jensen	339
	JVC	310, 311, 334, 339
	Kenwood	306, 310, 311, 339
	LXI	300, 305,
		306,307, 308, 309
	Magnavox	323, 324, 331
	Marantz	310, 311, 339
	Marta	306
	Memorex	309, 324
	MGA	338, 340, 341,
		347,348
	Minolta	300, 345
	Mitsubishi	338, 340, 341,
		347, 348
	Multitech	304, 347
	NEC	310,311, 334, 339
	Olympic	323, 324
	Optimus	306, 321, 328, 335
	Orion	320, 326
	Panasonic	321,322, 323, 324

Codes For VCR (Cont.)

	Brand	Code
	Penney	300,305, 310, 311,
		324, 339, 345
	Pentax	300,311, 345
	Philco	320, 323, 324,
		326, 331, 343
	Philips	323, 324, 331
	Pioneer	323
	Proscan	300, 301, 302,
		323, 324, 331,
		333, 345, 346
	Quasar	321, 322, 323, 324
	Radio Shack	305, 309, 324,
		333, 336, 340
	RCA	300, 301,302,
		323, 324, 331,
		333, 345, 346
	Realistic	305, 309, 324,
		336, 340
	Samsung	302, 304, 333
	Sansui	320, 326, 339, 352
	Sanyo	305, 309, 313
	Scott	301, 302, 304,
		309, 320, 326,
		338, 340, 347, 348
	Sears	300, 305, 306,
		307, 308
	Sharp	335, 336
	Shintom	317
	Signature	335
	2000
	Singer	337
	Sony	328, 329, 330
	Sylvania	331, 324, 331
	Tashiro	306
	Tatung	310, 311, 339
	Teac	310, 311, 339
	Technics	321, 322, 323, 324
	Teknika	324
	Toshiba	301, 346
	Vector	311
	Research
	Wards	306, 309, 335,
		336, 344
	Yamaha	305, 310, 311, 339
	Zenith	306,344

Codes For Cable Box

	Brand	Code
	ABC	124
	Archer	125, 132
	Cableview	105, 132
	Citizen	105,122
	Curtis	112, 113
	Diamond	124, 125, 132
	Eagle	129
	Eastern	134
	GCbrand	105, 132
	Gemini	122
	General	111, 119, 120,
	Instrument/	121, 122, 124,
	Jerrold	125, 126,127
	Hamlin	112, 118, 140,
		141, 142, 145
	Hitachi	103, 124
	Macom	103, 104, 105
	Magnavox	133
	Memorex	130
	Movietime	105, 132
	Oak	102, 137, 139
	Panasonic	109, 110, 114
	Philips	106,107, 128,
		129, 130
	Pioneer	101, 116
	Pulsar	105, 132
	Puser	132
	RCA	115
	Realistic	132
		112, 118, 140,
	Regal	141, 142, 145,
		149
	Regency	134
	Rembrandt	105, 132, 137
	Samsung	105
	Scientific	111, 112, 113
	Atlanta
	Slmark	101, 105
	Sprucer	105, 110
	Stargate	105, 110
	Teleview	101, 105
	Texscan	144
	Tocom	135
	Toshiba	104
	Unika	125, 132
	Universal	122, 132
	Videoway	106
	Viewstar	129, 130
	Zenith	100, 117
	Zenith/.Drake	100
	Satellite

Codes For DBS

	Brand	Code
	Dish Network	105, 115, 116
	(Echostar)
	Echostar	105
	Express VU	105, 115
	G. E.	106
	G.I. (General	108
	Instrument)
	Gradiente	114
	Hitachi	103, 111,
		112
	HNS (Hughes)	103
	Magnavox	101, 102
	Panasonic	104
	Philips	101, 102
	Primestar	108
	Proscan	106, 109, 110,
		113
	RCA	106, 109,
		110, 113
	Sony	107
	Star Choice	103, 108
	Toshiba	100
	Uniden	101, 102
	Codes For DVD

Brand	Code
Denon	100
Ferguson	101
JVC	109
Mitsubishi	105
Nordmende	101
Panasonic	100
Philips	103
Pioneer	102
RCA	101
Saba	101
Samsung	110
Sharp	108
Sony	104
Technics	100
Thomson	101
Toshiba	103
Yamaha	100
Zenith	107

20 z

REMOTE CONTROL OPERATION (FOR MODELS PT-47WX54 AND PT-53WX54 ONLY)

Component Codes (Cont.)

Codes For Cassette Decks

	Brand	Code
	Aiwa	223, 224, 225
	Denon	231
	Fisher	203
	Jensen	214
	JVC	229, 230
	Kenwood	200, 207
	Marantz	202
	Nakamichi	205
	Onkyo	208, 209, 213
	Panasonic	216, 218
	Philips	222
	Pioneer	204
	RCA	226, 227, 228
	Sansui	205, 210
	Sharp	231
	Sony	219, 220
	Teac	210, 211, 215
	Technics	216, 218
	Yamaha	201, 202
	Codes For Receivers

	Brand	Code
	Admiral	120
	Aiwa	125, 126
	Denon	134, 135, 136
	Fisher	104
	Garrard	113
	Harman	115, 123
	Kardon
	Jensen	129

Codes For Receivers

(cont.)

	Brand	Code
	JVC	132, 133
	Kenwood	100, 108
	Magnavox	127
	Marantz	124
	Mclntosh	116
	Nakamichi	106
	Onkyo	109, 114
	Optimus	103, 127, 130,
		131
	Panasonic	118, 119, 121
	Philips	123
	Pioneer	105, 107
	Quasar	118, 119, 121
	RCA	103, 105, 127,
		130, 131
	Sansui	103, 111, 139
	Sharp	134, 137
	Sony	122
	Soundesign	138
	Teac	111, 112, 113
	Technics	118, 119, 121
	Victor	132, 133
	Yamaha	101, 102

Codes For CD Player

	Brand	Code
	Admiral	226
	Aiwa	233, 235
	Carver	229
	Denon	242
	Emerson	239
	Fisher	205
	Harman/Kardon	219, 220,
		221, 223
	Hitachi	207
	Jensen	234
	JVC	240, 241, 245
	Kardon	223
	Kenwood	200, 201, 211,
		245
	LXI/Sears	236
	Magnavox	229, 232
	Marantz	229
	McIntosh	221
	Nakamichi	210
	Onkyo	214, 215
	Optimus	208, 218,
		220, 222
	Panasonic	224, 225, 227
	Philips	229, 230
	Pioneer	208
	Quasar	224, 225, 227
	RCA	231, 237,
		238, 247
	Sansui	210, 246
	Sanyo	205
	Scott	210, 246
	Sharp	242, 243
	Sherwood	220
	Sony	228
	Soundesign	244
	Teac	212, 216, 218
	Technics	224, 225, 227
	Victor	240, 241, 245
	Yamaha	202, 203, 204

Codes For Personal Video

Recorders

Brand Code

Panasonic Replay 100

TV

Philips Tivo	102
Sony Tivo	101

ENGLISH

21 z

BASIC MENU NAVIGATION

Basic Menu Navigation

ENGLISH

			EXIT
Press	to	display	the

Main Menu.							COLOR TEMP		NORMAL
	PICTURE						PICTURE
	PIC MODE			VIVID			NATURAL COLOR		ON
	COLOR		I I I I I I I I I I I I I I I I _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _				VIDEO NR		OFF
	TINT		- - - - - - - - - - - - - - - - I- - - - - - - - - - - - - - - -				3D Y/C FILTER		ON
					Press	to enter sub sub-menu
	PICTURE		I I I I I I I I I I I I I I I I I I I	I I I I I I I I I I I I I
	BRIGHTNESS		I I I I I I I I I I I I I I I - - - -	- - - - - - - - - - - - -			COLOR MATRIX		SD
						field.	FREEZE		SPLIT
							VM		ON
	SHARPNESS		I I I I I I I I I I I I I I I I _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
				NO
	NORMAL
							OTHER ADJ.
	OTHER ADJ.
							PRESS ACTION TO RETURN
	: EXIT : SUB MENU

			sub subMenu
Press	to choose the	EXIT	Field
	desired icon.

Press

to select desired sub

PICTURE

ON

NATURAL COLOR

COLOR TEMP

NORMAL

sub-menu.

VIDEO NR

OFF

PICTURE

VIVID

3D Y/C FILTER

ON

Press

to enter the sub-

PIC MODE

TINT

- - - - - - - - - - - - - - - - I- - - - - - - - - -

- - - - -

-

VM

ON

COLOR

I I I I I I I I I I I I I I I I _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

COLOR MATRIX

SD

menu field.

PICTURE

OTHER ADJ.

I I I I I I I I I I I I I I I I I I I I I I I I I I

I I I I

I I

BRIGHTNESS

I I I I I I I I I I I I I I I - - - - - - - - - - -

- - - - -

-

FREEZE

SPLIT

SHARPNESS

I I I I I I I I I I I I I I I I _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

PRESS ACTION TO RETURN

NORMAL

NO

OTHER ADJ.

PRESS ACTION FOR MAIN MENU

sub Menu

Field

PICTURE

Press

to select or adjust

PICTURE

COLOR TEMP

WARM

Press

to select desired

COLOR

desired sub sub-

I I I I I I I I I I I I I I I I _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

VIDEO NR

OFF

VIVID

NATURAL COLOR

ON

PIC MODE

sub-menu.

menu.

TINT

I I I I I I I I I I I I I I _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

COLOR MATRIX

SD

BRIGHTNESS

- - - - - - - - - - - - - - - - I- - - - - - - - - - - - - - - -

3D Y/C FILTER

ON

VM

ON

PICTURE

I I I I I I I I I I I I I I I I I I I I I I I I I

I I I I I I I

FREEZE

SPLIT

SHARPNESS

I I I I I I I I I I I I I I I I _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

NO

OTHER ADJ.

NORMAL

OTHER ADJ.

PRESS ACTION TO RETURN

PRESS ACTION FOR MAIN MENU

Note: To EXIT menus.

Press

to select or adjust

desired sub-menu.

BRIGHTNESS 32	IIIIIIIIII----------	Press	repeatedly until Main Menu	EXIT
			Icon is highlighted.
			Main Menu Icon

Note: For sub -menu with OTHER ADJ.

			PICTURE
			PIC MODE
			COLOR
			TINT
Press	to select OTHER ADJ.		BRIGHTNESS
			SHARPNESS
			PICTURE			Press	to exit Main Menu.
			NORMAL
			OTHER ADJ.	PRESS	to ENTER
			PRESS ACTION FOR MAIN MENU

NORMAL PICTURE

22 z

ICON MENUS OPERATION

Icon Menus Operation

PICTURE

Note: While sub-menu features are highlighted, press VOL to adjust or activate.

PIC MODE - Lets you choose one of three pre-set Picture Modes that best suits the program you are viewing. Selecting this feature will also affect Color Temperature setting.

PIC MODE - COLOR TEMP DEFAULT SETTINGS

	PIC MODE	COLOR TEMP
	VIVID	COOL
	STANDARD	NORMAL
	CINEMA	WARM

Note: Each mode has its own picture settings (Color, Tint, Brightness, Picture and Sharpness) and Color Temp settings.

• VIVID - This is the default mode, It provides enhanced picture contrast and sharpness for viewing in a well-lit room.

• STANDARD - Recommended for normal viewing conditions with subdued room lighting.

• CINEMA - Select this mode for watching movies in a darkened room. It provides a soft, film-like picture.

COLOR - Adjusts desired color intensity.TINT - Adjusts natural flesh tones.

BRIGHTNESS - Adjusts dark areas of picture.PICTURE - Adjusts white areas of picture.

SHARPNESS - Adjusts clarity of outline detail.

NORMAL - Reset each of the PIC Mode adjustments to factory default settings.

	PICTURE
	PIC MODE			VIVID
	COLOR		I I I I I I I I I I I I I I I I _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
	TINT		- - - - - - - - - - - - - - - - I- - - - - - - - - - - - - - - -
	BRIGHTNESS		I I I I I I I I I I I I I I I - - - - - - - - - - -		- - - - - -
	PICTURE		I I I I I I I I I I I I I I I I I I I I I I I I I I		I I I I I I
	SHARPNESS		I I I I I I I I I I I I I I I I _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
	NORMAL				NO
	OTHER ADJ.
	PRESS ACTION FOR MAIN MENU

OTHER ADJ.

Highlight OTHER ADJ. and press VOL to display the sub sub-menu.

Note: While sub sub-menu features are highlighted, press VOL to select or activate.

PICTURE
COLOR TEMP			COOL
NATURAL COLOR
					ON
VIDEO NR
				OFF
3D Y/C FILTER
					ON
COLOR MATRIX
					SD
VM
					ON
FREEZE
			SPLIT
OTHER ADJ.

PRESS ACTION TO RETURN

•COLOR TEMP (temperature) - To increase or decrease WARM (red) and COOL (blue) colors to suit personal preferences.

•NATURAL COLOR - To increase the color reproduction range with natural color gradation and highly delicate hues.

•VIDEO NR - Reduces noise in the channel, commonly called snow.

	• 3D Y/C FILTER - Minimizes noise and cross color in the
	picture.
	• COLOR MATRIX - Available only with 480p signal.
	Select HD or SD to automatically adjust color
	parameters for HD (high definition) and SD (standard
	definition). This feature is not selectable when viewing
	regular TV (NTSC) program.
	Note: When viewing a non-standard DTV signal
	format, you can change color parameters
	manually for the best picture quality.
	• VM (VELOCITY MODULATION)-To increase picture	ENGLISH
	sharpness and provides crisp white to black transitions
	• FREEZE - This feature is used to freeze main picture
	and display it in a PIP or SPLIT frame, when the
	FREEZE button on the remote control is pressed. Press
	FREEZE again to delete frame. SWAP, SIZE, SEARCH,
	PIP MIN and PIP MAX buttons are not functional in this
	mode.

AUDIO

Note: While sub-menu features are highlighted, press VOL to adjust or activate.

MODE - Select STEREO, SAP (Second Audio Program) or MONO. (Use MONO when stereo signal is weak).

BASS - Increase or decrease the bass response.

TREBLE - Increase or decrease the treble response.

BALANCE - Emphasize the left/right speaker volume.

NORMAL - Reset BASS, TREBLE and BALANCE adjustments to factory default settings.

AUDIO
MODE	STEREO SAP MONO
BASS
	I I I I I I I I - - - - - - - -
TREBLE	I I I I I I I I - - - - - - - -
BALANCE
	- - - - - - - - - - - I - - - - - - - - - - -
NORMAL	SET
OTHER ADJ.

: EXIT : SUB MENU

OTHER ADJ.

Note: While sub sub-menu features are highlighted, press VOL to adjust or activate.

AUDIO

AI SOUND	ON
BBE	ON

SURROUND OFF

SPEAKERS

ON

OTHER ADJ.

PRESS ACTION TO RETURN

•AI SOUND - Equalize overall volume levels across all channels. (AI sound is not available in VIDEO mode).

•BBE® - BBE High Definition Sound restores clarity and presence for better speech intelligibility and music realism.

23 z

ICON MENUS OPERATION

AUDIO (cont.)

OTHER ADJ.

•SURROUND - Enhances audio response when listening to stereo.

•SPEAKERS - This feature is used when connecting to an external amplifier.

•ON - TV speakers operate normally.

•OFF & Variable Audio Out - TV speakers off - audio adjustable by television.

•OFF & Fixed Audio Out - TV speakers off - audio adjustable by the external amplifier only.

ENGLISH	CHANNELS
	FAVORITES - To enter up to 16 favorite channels. Use
	CHANNEL SCAN - Select FAV or ALL.
	Note: Use remote numeric keypad to select desired FAV
	channels.
	remote control numeric keypad to select desired
	channels.
	CHANNELS
	CH. SCAN	ALL
	FAVORITES ENTER CHANNEL	3
	FAVORITE CHANNELS
	3
	: ADD
	: DELETE
	OTHER ADJ.
	PRESS ACTION FOR MAIN MENU
	OTHER ADJ.

Highlight OTHER ADJ. and press VOL to display the sub sub-menu.

•PRESET CAPTION - To enter channel numbers for popular TV stations.

Procedure

•Press CH to select desired preset caption.

•Then use the remote numeric keypad to select desired channel (refer to your local TV guide).

		CHANNELS				CHANNELS
		PRESET CAPTION				PRESET CAPTION
					ABC	- - -	A&C	- - -
		MANUAL CAPTION			CBS	- - -	AMC	- - -
		INPUT LABEL			FOX	- - -	BET	- - -
					NBC	- - -	BRAVO	- - -
					PBS	- - -	CNBC	- - -
					CNN	- - -	CNN/SI	- - -
					ESPN - - -		COMEDY	- - -
					HBO	- - -	COURT	- - -
	OTHER ADJ.
					PRESS FOR MORE CHANNELS
	PRESS ACTION TO RETURN					PRESS ACTION TO RETURN
Note:
	To delete a channel,			press		VOL while		channel
	number is highlighted.

•MANUAL CAPTION - To enter numbers and captions manually.

Note: Use the remote numeric keypad to select desired channel (refer to your local TV guide).

		CHANNELS		CHANNELS
				MANUAL CAPTION
		PRESET CAPTION		ENTER CHANNEL		3
		MANUAL CAPTION		ENTER CAPTION	_ _ _ _
		INPUT LABEL
				TO MOVE CURSOR
				TO SELECT CHANNEL
	OTHER ADJ.
				PRESS ACTION TO RETURN
	PRESS ACTION TO RETURN

•INPUT LABEL - To label video input connections for onscreen display.

CHANNELS

PRESET CAPTION

MANUAL CAPTION

INPUT LABEL

OTHER ADJ.

PRESS ACTION TO RETURN

CHANNELS

INPUT LABEL

COMPONENT1
COMPONENT2	SKIP
DIGITAL - IN
VIDEO1	VCR
VIDEO2
VIDEO3	DVD
VIDEO4

TO MOVE CURSOR

TO SELECT LABEL

PRESS ACTION TO RETURN

Procedure

•	Press CH or CH	to select the desired Video
	input.
•	Press VOL or VOL	to select desired preset

input label (see chart below).

			INPUT LABEL CHART
		PRESET		REASON FOR SELECTING
		LABELS
		VCR	Select when VCR is connected to video input.
		DVD	Select when DVD is connected to video input.
		SKIP	Select to skip unused video input when
				pressing TV/VIDEO button.
		CABLE	Select when CABLE box is connected
				to video input.
		DBS	Select when DBS is connected to video input.
		DTV STB	Select when digital TV set-top-box is
				connected
				to video input.
		PVR (Personal	Select when a personal video recorder is
		Video Recorder)		connected to video input.
		GAME	Select when Video GAME is connected
				to video input.
		AUX	Select when other components are
				connected.
		_____		Select to delete input label.
TIMER
Note: Use CH			or CH	to highlight and use VOL or VOL
		to select.
				TIMER
				NO
			SLEEP
			TIMER 1
			TIMER 2
			CLOCK SET

PRESS ACTION FOR MAIN MENU

SLEEP - Select to turn PTV off in 30, 60, or 90 minutes. Select NO to turn sleep timer off.

TIMER 1 and TIMER 2 - Select one or both timers to turn the PTV on and off at selected times, on selected channel, and on selected days.

Notes:

•The television automatically turns OFF after 90 minutes when turned ON by the TIMER. If the OFF time is selected or if a key is pressed, the automatic OFF after 90 minutes will be cancelled.

•The TIMER is active when the television is OFF or ON. The television will switch to the selected channel at the selected time set in the TIMER.

CLOCK SET - Set the time of the day and the day of the week.

24 z

ICON MENUS OPERATION

	LOCK
	CREATE CODE FIRST - Use the remote numeric
	keypad to enter a four-digit secret code (Use a code								LOCK
	that is easy to remember and record it in a safe place).						LOCK SET			OFF
								BLOCK PROGRAMS:
							V-CHIP SET
					LOCK				U.S. TV PROGRAMS
									SETTING:
							HOW LONG?		12 HOURS
		CREATE		_	_ _ _
		CODE FIRST
							CODE	CHANGE CODE - - - -
							PRESS ACTION FOR MAIN MENU

		Procedure
		•	Press CH		to highlight Enter Code
PRESS ACTION FOR MAIN MENU		•	Use the numeric keypad to enter your four digit code.
LOCK SET - To prevent video games, VCR tapes and			(Use a code that is easy to remember and record it in					ENGLISH
			a safe place.)
all channels and video modes from being viewed.
		•	Press CH to highlight V-CHIP SET.
	LOCK	•	Press		VOL or VOL	to select desired mode: U.S.
LOCK SET	OFF		TV Programs, U.S. Movies, Canadian English or
V-CHIP SET	BLOCK PROGRAMS:		Canadian French mode.
	U.S. TV PROGRAMS	•	Press CH to highlight SETTING.
	SETTING:
HOW LONG?	12 HOURS	•	Press	VOL or VOL		to display desired rating chart:
CODE	CHANGE CODE - - - -		U.S. TV Programs, U.S. Movies, Canadian English or
PRESS ACTION FOR MAIN MENU			Canadian French.
Notes:		•	Press VOL to select ON or OFF.
		•	Press CH		to select VIEW NR PROGRAMS? for U.S.
• If you do not remember your code, LOCK will unlock in
			TV Programs and U.S. Movies or VIEW E PROGRAMS
12, 24, or 48 hours, depending on the current set-up. Be
			for Canadian English and Canadian French.
cautious when selecting ALWAYS. If ALWAYS is
		•	Press VOL to select YES or NO.
selected and you forget your secret code, the TV must
		U.S TV Programs
be serviced by a qualified technician to clear the LOCK
set-up.		This	TV model		features the	“V-Chip technology”	which

•If you select CHANGE CODE, and you change your allows you to use U.S. TV PROGRAMS Guide ratings to code from the one used in the LOCK menu, your new block various types of TV programs. PIP will also be

code becomes the controlling code.

blocked automatically.

Procedure

LOCK

•

Press VOL

to select.

U. S. TV PROGRAMS

OFF

•

OFF - Turns Lock function off.

VIEW NR PROGRAMS?

YES

SETTING:

BASIC

•

GAME - Lock CH 3, 4 and Video inputs.

TV-Y

- - - - - - - - - - - - - - - - - - - - -

TV-Y7 FV

•

CHANNEL - Lock up to four channels.

TV-G

TV-PG V S L D

•

ALL - Locks all channels and video inputs.

TV-14 V S L D

TV-MA V S L

LOCK

PRESS ACTION TO RETURN

Note:

Selecting “Yes”, NR programs will be received. Selecting

LOCK SET

OFF

“NO”,

NR

programs will

be

blocked (See Customer

U.S. TV PROGRAMS

V-CHIP SET

BLOCK PROGRAMS:

Caution on the next page).

SETTING:

HOW LONG?

12 HOURS

Procedure

CODE

CHANGE CODE - - - -

•

Press CH to select SETTING.

PRESS ACTION FOR MAIN MENU

•

Press VOL

to select BASIC or DETAILED.

ACTION

BASIC - Allows you to select only general ratings such

•

Press

then CH to highlight HOW LONG?.

as TV-Y, TV-PG, etc.

•

Press VOL

to select 12 Hours, 24 Hours, 48 Hours or

DETAILED - Allows you to select both general ratings

ALWAYS.

and content such as V, L, etc.

Note: If GAME, CHANNEL or ALL is selected, and if a blocked

•

Press CH

or CH to move between different ratings.

channel or video input is selected, the message

•

Use

VOL or VOL

to select ratings you want to

LOCKED displays in the upper left corner of the TV

block (RED) and unblock (GREEN).

screen.

•

Press

ACTION

V-CHIP SET - V-Chip technology allows parents to use

to return to V-CHIP SET.

•

Press CH to select HOW LONG?.

the PTV rating codes to block programs that they feel

are inappropriate for their children to watch. PIP will

•

Press

VOL or VOL to select 12, 24, 48 hours or

also be blocked automatically.

ALWAYS.

•

Press ACTION to return to Main Menu, then press CH

to exit.

25 z

ICON MENUS OPERATION

LOCK (cont.)

U.S TV Programs (cont.)

Customer Caution

The V-Chip system that is used in this set is capable of blocking “NR” programs (non rated, not applicable and none) per FCC Rules Section 15.120(e)(2). If the option of blocking “NR” programs is chosen “unexpected and possibly confusing results may occur, and you may not receive emergency bulletins or any of the following types of programming:”

	• Emergency		Bulletins	(Such	as	EAS	messages,
ENGLISH		weather warnings and others)
	•	Locally originated programming
	•	News
	•	Political
	•	Public Service Announcements
	•	Religious
	•	Sports
	•	Weather

	U.S. TV Programs Rating Chart Description
	NR	Not Rated. SEE CUSTOMER CAUTION above.
		All children. The themes and elements in this
	TV-Y	program are specifically designed for a very young
		audience, including children from ages 2-6.
		Directed to older children. Themes and elements
	TV-Y7	in this	program may include	mild physical or
		comedic violence, or may frighten children under
		the age of 7.
		General audience. It contains little or no violence,
	TV-G	no strong language, and little or no sexual dialogue
		or situations.
		Parental guidance suggested. The program may
	TV-PG	contain	infrequent coarse	language, limited
		violence, some suggestive sexual dialogue and
		situations.
		Parents strongly cautioned. This program may
	TV-14	contain sophisticated themes, sexual content,
		strong language and more intense violence.
		Mature audiences only. This program may contain
	TV-MA	mature themes, profane language, graphic violence,
		and explicit sexual content.
	FV	FANTASY/CARTOON VIOLENCE
	V	VIOLENCE
	S	SEX
	L	OFFENSIVE LANGUAGE
	D	DIALOGUE WITH SEXUAL CONTENT

U.S. Movies

This TV model features the “V-Chip technology” which allows you to use Motion Picture Ratings when viewing movies or video tapes. This innovation allows parents to block various types of movies and video tapes at their discretion. PIP will also be blocked automatically.

		LOCK
LOCK SET		OFF
V-CHIP SET	BLOCK PROGRAMS:
		U.S. MOVIES
		SETTING:
HOW LONG?		12 HOURS
CODE	CHANGE CODE - - - -

PRESS ACTION FOR MAIN MENU

Note: Some movies are not rated for a variety of reasons. Old movies and foreign films are usually not rated.

						LOCK
				U.S. MOVIES			OFF
				VIEW NR PROGRAMS?			YES
				G
				PG
				PG-13
				R
				NC-17
				X
				PRESS ACTION TO RETURN
Procedure
•	Press CH			or CH		to move between different
	ratings.
•	Use	VOL or VOL			to select ratings you want to
	block (RED) and unblock (GREEN).
•	Press	ACTION		to return to	V-CHIP SET.

•Press CH to select HOW LONG?.

• Press VOL or VOL to select 12, 24, 48 hours or ALWAYS.

•Press ACTION to return to Main Menu, then press CH to exit.

U.S. Movies Rating Chart Description

		CONTAINS NO RATING (NOT RATED) AND NA
	NR	(NOT APPLICABLE) PROGRAMS. Movie has
		not been rated or rating does not apply.
	G	GENERAL AUDIENCES. All ages admitted.
	PG	PARENTAL GUIDANCE SUGGESTED. Some
		material may not be suitable for children.
		PARENTS STRONGLY CAUTIONED. Some
	PG-13	material may be inappropriate for children under
		13.
	R	RESTRICTED. Under 17 requires accompanying
		parent or adult guardian.
	NC-17	NO ONE 17 AND UNDER ADMITTED.
	X	ADULTS ONLY.

Canadian English

The V-CHIP used in this TV model allows you to block various types of movies and television programs based on the two rating systems used in Canada. PIP will also be blocked automatically.

			LOCK
LOCK SET					OFF
			BLOCK PROGRAMS:
V-CHIP SET
			CANADIAN ENGLISH
				SETTING:
HOW LONG?
				12 HOURS
CODE	CHANGE CODE
						- - - -

PRESS ACTION FOR MAIN MENU

26 z

ICON MENUS OPERATION

LOCK (cont.)

Canadian English (cont.)

Note: E (Exempt) programming includes: news, sports, documentaries and other information programming, talk shows, music videos, and variety programming.

				LOCK
			CANADIAN ENGLISH
					OFF
			VIEW E PROGRAMS?		YES
				C
				C8+
				G
				PG
				14+
				18+
			PRESS ACTION TO RETURN
Procedure
•	Press CH or CH			to move between different ratings.
•	Use	VOL or VOL		to select ratings you want to
	block (RED) and unblock (GREEN).
•	Press	ACTION
			twice to return to V-CHIP SET.

•Press CH to select HOW LONG?.

• Press VOL or VOL to select 12, 24, 48 hours or ALWAYS.

•Press ACTION to return to Main Menu, then press CH to exit.

Canadian English Rating Description

.
			Exempt - Exempt programming includes:
		E	news,	sports,	documentaries	and other
			information programming, talk shows, music
			videos, and variety programming.
			Programming intended for children under age
		c	8. No offensive language, nudity or sexual
			content.
			Programming		generally	considered
		C8+	acceptable for children 8 years and over. No
			profanity, nudity or sexual content.
		G	General	programming, suitable for all
			audiences.
		PG	Parental Guidance suggested. Some material
			may not be suitable for children.
			Programming contains themes or content
			which may not be suitable for viewers under
		14+	the age of 14. Parents are strongly cautioned
			to exercise discretion in permitting viewing
			by pre-teens and early teens.
		18	ADULTS ONLY

Canadian French

The V-CHIP used in this TV model also lets you block or unblock Canadian French programs according to various ratings categories. PIP will also be blocked automatically.

			LOCK
LOCK SET					OFF
			BLOCK PROGRAMS:
V-CHIP SET
			CANADIAN FRENCH
				SETTING:
HOW LONG?
				12 HOURS
CODE	CHANGE CODE
						- - - -

PRESS ACTION FOR MAIN MENU

Note: E (Exempt) programming includes: news, sports, documentaries and other information programming, talk shows, music videos, and variety programming.

LOCK

CANADIAN FRENCH	OFF
VIEW E PROGRAMS?	YES

G

8 ANS+ 13ANS+ 16ANS+ 18ANS+

			PRESS ACTION TO RETURN		ENGLISH
	block (RED) and unblock (GREEN).
Procedure
•	Press CH		or CH	to move between different ratings.
•	Use	VOL or VOL		to select ratings you want to
		ACTION

• Press

twice to return to V-CHIP SET.

•Press CH to select HOW LONG?.

• Press VOL or VOL to select 12, 24, 48 hours or ALWAYS.

•Press ACTION to return to Main Menu, then press CH to exit.

Canadian French Rating Description

	E	Exempt - Exempt programming.
		General	- Programming intended
		for audience of all ages. Contains
	G	no violence, or			the	violence
		content is minimal or is depicted
		appropriately.
		8+ General - Not recommended for
		young	children.		Programming
	8 ans +	intended for a broad audience but
		contains	light	or occasional
		violence.	Adult		supervision
		recommended.
		Programming may not be suitable
		for children under the age of 13 -
		Contains	either	a	few	violent
	13 ans +	scenes or one or more sufficiently
		violent scenes to affect them.
		Adult	supervision			strongly
		suggested.
		Programming may not be suitable
	16 ans +	for children under the age of 16 -
		Contains	frequent		scenes		of
		violence or intense violence.
		Programming restricted to adults.
	18 ans +	Contains	constant		violence		or
		scenes of extreme violence.

27 z

ICON MENUS OPERATION

LOCK (cont.)

Main and Split Blocking Message

If V-Chip is enabled and the program exceeds the rating limit set by you, the blocking message will appear and the audio will be muted. Enter your four-digit secret code if you wish to continue viewing the program. After entering your code, all locks and rating blocks are disabled until the PTV is turned off or until all settings are off.

Note:	If you enter your four-digit secret code to override rating
	blocks, you must reset all rating blocks by either
	reprogramming or turning the PTV off.
ENGLISH	Main Picture		Split Picture
			PROGRAM
			RATING
			EXCEEDED
	PROGRAM RATING EXCEEDED
	ACCESS CODE	- - - -

ACCESS _ _ _ _

CODE

PIP Blocking Message

PIP function is available when V-chip feature is activated. If the program being viewed in PIP exceeds the set rating limit, PIP will disappear and a blocking message will appear on screen.

Note: If the V-chip feature is activated while PIP is on, PIP will immediately disappear. Enable PIP functions by setting V-CHIP ratings to OFF.

PIP RATING

EXCEEDED

SET UP

While the desired sub menu is highlighted, press VOL		to
select or activate feature.
	SET UP
IDIOMA/	ENGLISH
LANGUE
ANTENNA	ANT 1
CC ON MUTE	NO
CC MODE	OFF

CONVERGE.

OTHER ADJ.

PRESS ACTION FOR MAIN MENU

IDIOMA/LANGUE - Select to change menu language to ENGLISH, ESPAÑOL (Spanish) or FRANÇAIS (French).

ANTENNA - To select either ANT1 or ANT2.

CC ON MUTE - Activates the onscreen Closed Caption feature when the MUTE button on the remote control is pressed. To deactivate press MUTE button again.

		SETUP
	IDIOMA/	ENGLISH
	LANGUE
	ANTENNE	ANT 1
	CC ON MUTE	NO
	CC MODE	OFF
	CONVERGE.
	OTHER ADJ.

PRESS ACTION FOR MAIN MENU

CC MODE - This television contains a built-in decoder

that displays CC (Closed Captioned) text across the screen (white or colored letters on black background). It allows the viewer to read the dialogue of a television program or other information. The program viewed must include Closed Captioning for the feature to work. Activate the onscreen Closed Caption feature by selecting one of the following modes

Note: Closed Captioning does not function when the Picture Aspect ratio is set to zoom, To properly display Closed Caption, choose an aspect ratio other than Zoom.

•OFF - When Closed Caption is not desired.

•C1 - For video related information to be displayed, up to 4 lines onscreen at a time. (It does not block relevant parts of the picture). Text may be in any language.

•C2 to C4 - For other modes of video related information.

•T1 to T4 - For program guide and other information to be displayed, when available. (Blocks a large portion of the picture on the television screen).

Note: C1 mode is recommended for viewing Closed Caption.

CONVERGE

Note: Only use the remote control buttons while adjusting convergence. The front control panel navigation and Action buttons have no effect.

				SET UP
		IDIOMA/
		LANGUE
		ANTENNA
			CC ON MUTE
			CC MODE
		CONVERGE.		PRESS TO ENTER
		OTHER ADJ.
			PRESS ACTION FOR MAIN MENU
Note: Convergence			seldom	needs adjusting except after
	moving the PTV or to make minor adjustments.
Procedure
•	Press	VOL	to enter converge sub-menu field.
•	Press	CH	or CH	to select:

•CONVERGENCE ADJ. - Select to correct minor convergence problem.

Note: After selecting, press VOL	to continue
CONVERGENCE ADJ.

•RESET TO DEFAULT - Select to set convergence to factory default setting.

28 z