S P E C F I L E
The PT-DW730LS and PT-DW730LK are not equipped with a lens.
Product Number : PT-DW730S/DW730K
PT-DW730LS/DW730LK
Product Name : |
DLP™ Projectors |
As of December 2011. Specifications and appearance are subject to change without notice. |
1 / 1 5 |
SFD11M001-1
S P E C F |
I L E |
DLP™ Projectors |
PT-DW730S/DW730K/DW730LS/DW730LK |
Main unit
Power supply
Power consumption |
120 V AC, 60 Hz |
|
220–240 V AC, 50/60 Hz |
DLP™ chip |
Panel size |
|
Display method |
|
Pixels |
Lens |
PT-DW730S/DW730K |
|
PT-DW730LS/DW730LK |
Lamp |
|
Screen size |
|
Brightness*2
Center-to-corner uniformity*2
Contrast*2
Resolution
Scanning frequency |
DVI-D |
|
RGB |
|
YPBPR (YCBCR) |
Video/S-Video
Optical axis shift
Keystone correction range
Installation |
|
Terminals |
DVI-D IN |
RGB 1 IN
R, G, B
120 V AC, 7.5 A, 50/60 Hz
220–240 V AC, 4.3 A, 50/60 Hz
790 W (830 VA) (0.2 W with standby mode set to eco*1, 8 W with standby mode set to normal. Both with fan stopped.)
760 W (950 VA) (0.3 W with standby mode set to eco*1, 9 W with standby mode set to normal. Both with fan stopped.)
16.5 mm (0.65 in) diagonal (16:10 aspect ratio) DLP™ chip × 1, DLP™ system
1,024,000 (1,280 × 800) × 1, total of 1,024,000 pixels
Powered zoom/focus lenses (1.8 – 2.5:1), F 1.7–1.9, f 25.6 – 35.7 mm Optional powered zoom/focus lenses and fixed-focus lens
300 W (max. 310 W) UHM lamps (× 2) (dual lamp system)
1.27 –15.24 m (50 – 600 inches) (1.27– 5.08 m (50– 200 inches) with the ET-DLE055), 16:10 aspect ratio
7,000 lumens (dual lamp, lamp mode: high)
90%
2,500:1 (full on/full off, contrast mode: high, brightness: 3,500 lumens) 1,280 × 800 pixels (Input signals that exceed this resolution will be converted to 1,280 × 800 pixels.)
fH: 15 kHz – 91 kHz, fV: 50 Hz – 85 Hz, dot clock: 162 MHz or lower fH: 15 kHz – 91 kHz, fV: 50 Hz – 85 Hz, dot clock: 150 MHz or lower
480i (525i): |
fH 15.75 kHz; |
fV 60 Hz, |
||
576i (625i): |
fH 15.63 kHz; |
fV 50 Hz, |
||
480p (525p): |
fH 31.50 kHz; |
fV 60 Hz, |
||
576p (625p): |
fH 31.25 kHz; |
fV 50 Hz, |
||
720 (750)/60p: |
fH 45.00 kHz; |
fV 60 Hz, |
||
720 (750)/50p: |
fH 37.50 kHz; |
fV 50 Hz, |
||
1035/60i: |
fH 33.75 kHz; |
fV 60 Hz, |
||
1080 (1125)/60i: |
fH 33.75 kHz; |
fV 60 Hz, |
||
1080 (1125)/50i: |
fH 28.13 kHz; |
fV 50 Hz, |
||
1080/25p: |
fH 28.13 kHz; |
fV 25 Hz, |
||
1080/24p: |
fH 27.00 kHz; |
fV 24 Hz, |
||
1080/24sF: |
fH 27.00 |
kHz; |
fV 48 |
Hz, |
1080/30p: |
fH 33.75 |
kHz; |
fV 30 |
Hz, |
1080/60p: |
fH 67.50 |
kHz; |
fV 60 |
Hz, |
1080/50p: |
fH 56.25 |
kHz; |
fV 50 |
Hz |
fH: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60] fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]
Vertical: +60% (powered), horizontal: ±10% (powered) Vertical: ±40° (±30° with the ET-DLE055 and ET-DLE080) Ceiling/floor, front/rear
DVI-D 24-pin × 1, DVI 1.0 compliant, HDCP compatible, for single link only
480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p, 1080/24sF, 1080/25p, 1080/30p, 1080/60p, 1080/50p,
VGA (640 × 480) – WUXGA*3 (1,920 × 1,200), compatible with noninterlaced signals only, dot clock: 25–162 MHz
BNC × 5
R: 0.7 Vp-p, 75 ohms,
G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms, B: 0.7 Vp-p, 75 ohms
HD/VD, SYNC: High impedance, TTL (positive/negative)
NOTE: HD/SYNC, and VD terminals do not accept tri-level sync signals.
Y, PB, PR (Y, CB, CR) Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms
As of December 2011 |
|
2 / 1 5 |
SFD11M001-1
S |
P E C |
F I |
L E |
|
DLP™ Projectors |
PT-DW730S/DW730K/DW730LS/DW730LK |
|||
|
|
|
RGB 2 IN |
D-sub HD 15-pin × 1 |
|
|
|
R, G, B |
R: 0.7 Vp-p, 75 ohms, |
|
|
|
|
G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms, |
|
|
|
|
B: 0.7 Vp-p, 75 ohms |
|
|
|
|
HD/VD, SYNC: High impedance, TTL (positive/negative) |
|
|
|
|
NOTE: HD/SYNC, and VD terminals do not accept tri-level sync signals. |
|
|
|
Y, PB, PR (Y, CB, CR) |
Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms |
|
|
|
VIDEO IN |
BNC × 1, 1.0 Vp-p, 75 ohms |
|
|
|
S-VIDEO IN |
Mini DIN 4-pin × 1, Y: 1.0 Vp-p, C: 0.286 Vp-p, 75 ohms |
|
|
|
SERIAL IN |
D-sub 9-pin × 1 for external control (RS-232C compliant) |
|
|
|
SERIAL OUT |
D-sub 9-pin × 1 for link control (RS-232C compliant) |
|
|
|
REMOTE 1 IN |
M3 jack × 1 for wired remote control |
|
|
|
REMOTE 1 OUT |
M3 jack × 1 for link control |
|
|
|
REMOTE 2 IN |
D-sub 9-pin × 1 for external control (parallel) |
|
|
|
LAN |
RJ-45 × 1 for network connection, 100Base-TX/10Base-T, compliant |
|
|
|
|
with PJLink™ |
Power cord length |
|
|
3.0 m (9 ft 10 in) |
|
Cabinet materials |
|
|
Molded plastic |
|
Dimensions (W × H × D) |
PT-DW730S/DW730K |
498 mm × 175 mm*4 × 466 mm*5 (19-19/32˝ × 6-7/8˝ *4 × 18-11/32˝ *5 ) |
||
|
|
|
|
(with supplied lens) |
|
|
|
PT-DW730LS/DW730LK |
498 mm × 175 mm*4 × 432 mm*5 (19-19/32˝ × 6-7/8˝ *4 × 17˝ *5 ) |
|
|
|
|
(without lens) |
Weight |
|
PT-DW730S/DW730K |
Approx. 16.3 kg (35.9 lbs) (with supplied lens) |
|
|
|
|
PT-DW730LS/DW730LK |
Approx. 15.4 kg (34.0 lbs) (without lens) |
Operation noise*2 |
|
|
39 dB (dual lamp operation, lamp mode: high), |
|
Operating temperature |
|
35 dB (dual lamp operation, lamp mode: normal) |
||
Operating humidity |
|
|
0°– 45°C (32°–113°F) *6 |
|
|
|
|
|
20%– 80% (no condensation) |
Remote control unit |
|
|
||
Power supply |
|
|
|
|
Operation range*7 |
|
|
3 V DC (R6/AA type battery × 2) |
|
|
|
|
|
Approx. 30 m (98 ft 5 in) when operated from directly in front of the |
Dimensions (W × H × D) |
|
signal receptor |
||
Weight |
|
|
51 × 176 × 23 mm (2˝ × 6-15/16˝ × 29/32˝) |
|
|
|
|
|
Approx. 134 g (4.7 oz) (including batteries) |
Supplied accessories |
|
|
||
|
|
|
|
Power cord (× 1) |
|
|
|
|
Power cord security lock (× 1) |
|
|
|
|
Wireless/wired remote control unit (× 1) |
|
|
|
|
Batteries for remote control (R6/AA type × 2) |
Optional accessories |
|
|
||
Zoom lens (0.8–1.0:1) |
|
|
||
Zoom lens (1.4– 2.0:1) |
|
ET-DLE080 |
||
Zoom lens (2.4 – 3.8:1) |
|
ET-DLE150 |
||
Zoom lens (3.8 – 5.7:1) |
|
ET-DLE250 |
||
Zoom lens (5.6 – 9.0:1) |
|
ET-DLE350 |
||
Fixed-focus lens (0.8:1) |
|
ET-DLE450 |
||
Ceiling mount bracket |
|
ET-DLE055 |
||
|
|
|
|
ET-PKD56H (for high ceilings) |
Replacement lamp unit |
|
ET-PKD55S (for low ceilings) |
||
|
|
|
|
ET-LAD60A |
Replacement filter unit |
|
ET-LAD60AW (Twin Pack) |
||
|
|
|
|
ET-EMF300 |
Weights and dimensions shown are approximate. Specifications and appearance are subject to change without notice. |
||||
*1 |
When the standby mode is set to eco, network functions such as power on over the LAN network will not operate, and the serial output termi- |
|||
|
nal cannot be used. Also, only certain commands can be received for external control using the serial terminal. |
|||
*2 |
Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards. |
|||
*3 |
WUXGA resolution is supported only when the signals are compliant with VESA CVT-RB (Coordinated Video Timing-Reduced Blanking). |
|||
*4 |
With legs at shortest position. |
|
||
*5 |
Protruding parts not included. |
|
||
*6 |
The operating temperature range is 0°C to 40°C (32°F to 104°F) when the fan control is set to High Altitude mode (for altitudes from 1,400 m to |
|||
|
2,700 m (4,593 ft to 8,858 ft) above sea level). Also, if the ambient temperature exceeds 40°C (104°F) (35°C (95°F) in High Altitude mode) when |
|||
|
the projector is being used with Lamp Select set to Dual and Lamp Power set to High, the light output may be reduced approximately 20% to |
|||
|
protect the projector. |
|
|
|
*7 |
Operation range differs depending on environments. |
|
||
|
|
|
||
As of December 2011 |
|
3 / 1 5 |
SFD11M001-1
S P E C F I L |
E |
DLP™ Projectors |
PT-DW730S/DW730K/DW730LS/DW730LK |
Dimensions |
|
466 (18-11/32) |
423 (16-21/32) |
|
|
||
|
9 (11/32)
43 (1-11/16)
416 (16-3/8)
498 (19-19/32)
unit : mm (inch)
NOTE: This illustration is not drawn to scale. The illustration shows the PT-DW730S/DW730K.
175 (6-7/8) |
155 (6-3/32) |
77.5 (3-1/16) |
21 (13/16) |
|
|
20 (25/32) |
|
1 |
|
2 |
|
3 |
4 |
5 |
1 |
Video input |
7 |
Remote 1 |
input |
|||
|
|
|
|
|
|
|
|
|
2 |
S-Video input |
8 |
Remote 1 |
output |
|
|
|
|
|
|
|
|
|
|
3 |
RGB 1 |
input |
9 |
Remote 2 |
input |
|
|
|
|
|
|
|
|
|
||||||
LAN VIDEO IN S-VIDEO IN |
|
RGB1 IN |
RGB2 IN |
DVI-D I N |
4 |
RGB 2 |
Input |
10 |
Serial input |
|||||
|
|
IN |
|
OUT |
|
|
|
|
||||||
|
|
|
REMOTE 1 |
REMOTE 2 |
IN SERIAL |
OUT |
|
5 |
DVI-D input |
11 |
Serial output |
|||
6 |
|
7 |
8 |
9 |
10 |
11 |
|
6 |
LAN connector |
|
|
|
||
|
|
|
|
|
|
|
|
As of December 2011 |
4 / 1 5 |
SFD11M001-1
S P E C F |
I L E |
DLP™ Projectors |
PT-DW730S/DW730K/DW730LS/DW730LK |
Upper edge of projected image H L
Projected image
L H
Lower edge of projected image
L
Projected image
C a u t i o n :
|
|
|
|
|
|
*1 When the lens protrudes to the maximum. |
|
|
|
|
|
|
|
||
2 |
17/32)-16 |
416–496 3/8–-(16 17/32)-19 |
A: 84 |
mm (3-5/16˝ ) with the ET-DLE080 |
|||
|
|
|
340–420 3/8–-(13 |
|
|
||
* |
|
|
43 |
mm (1-11/16˝ ) with the supplied lens |
|||
|
|
|
|
|
|
44 |
mm (1-23/32˝ ) with the ET-DLE150 |
|
|
|
|
|
|
45 |
mm (1-25/32˝ ) with the ET-DLE250 |
|
|
|
|
|
|
51 |
mm (2˝ ) with the ET-DLE350 |
|
|
|
|
|
|
95 |
mm (3-3/4˝ ) with the ET-DLE450 |
|
|
|
|
|
|
27 |
mm (1-1/16˝ ) with the ET-DLE055 |
*2 Adjustable in 40 mm (1-9/16˝) steps.
A*1 168 255
(6-10/16) (10-1/32)
|
unit : mm (inch) |
100 (3-15/16) |
344 (13-17/32) |
100 |
NOTE: |
|
|
(3-15/16) |
Illustrations show the projector installed |
|
using optional ceiling mount bracket |
400 |
ET-PKD56H and an optional lens. |
|
(15-3/4) |
||
This illustration is not drawn to scale. |
||
|
•All construction work should be done by a qualified technician.
•When mounting to the ceiling, use the special mounting bracket. To prevent the projector from swaying or dropping, attach the wire between the mounting bracket and the ceiling.
As of December 2011 |
5 / 1 5 |
SFD11M001-1