Operating Instructions
Functional Manual
DLPTM Projector Commercial Use
Model No. PT-DW640U
PT-DW640UL
PT-DX610U
PT-DX610UL
Thank you for purchasing this Panasonic product.
■■ This manual is common to all the models regardless of suffixes of the Model No.
zzS: Silver model, the standard zoom lens supplied |
LS: Silver model, the lens sold separately |
K: Black model, the standard zoom lens supplied |
LK: Black model, the lens sold separately |
■■ Before operating this product, please read the instructions carefully and save this manual for future use.
■■ Before using your projector, be sure to read “Read this first!” (x pages 2 to 8).
ENGLISH
TQBJ0506
Read this first!
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DONOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.
CAUTION: This equipment is equipped with a three-pin grounding-type power |
|
plug. Do not remove the grounding pin on the power plug. This plug |
|
will only fit a grounding-type power outlet. This is a safety feature. If |
|
you are unable to insert the plug into the outlet, contact an electrician. |
Do not remove |
Do not defeat the purpose of the grounding plug. |
CAUTION: To assure continued compliance, follow the attached installation instructions, which include using the provided power cord and shielded interface cables when connecting to computer or peripheral device. If you use serial port to connect PC for external control of projector, you must use a commercial RS-232C serial interface cable with ferrite core. Any unauthorized changes or modifications to this equipment will void the user’s authority to operate.
2 - ENGLISH
Read this first!
FCC NOTICE (USA)
Verification |
|
Model Number: |
PT-DW640US / PT-DW640UK / PT-DW640ULS / PT-DW640ULK / |
|
PT-DX610US / PT-DX610UK / PT-DX610ULS / PT-DX610ULK |
Trade Name: |
Panasonic |
Responsible Party: |
Panasonic Corporation of North America |
Address: |
One Panasonic Way, Secaucus, NJ 07094 |
Telephone number: |
(877)803-8492 |
E-mail: projectorsupport@us.panasonic.com
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
To assure continued compliance, follow the attached installation instructions and do not make any unauthorized modifications.
CAUTION:
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
NOTIFICATION (Canada)
This class A digital apparatus complies with Canadian ICES-003.
WARNING:
zzNot for use in a computer room as defined in the Standard for the Protection of Electronic Computer/Data Processing Equipment, ANSI/NFPA 75.
zzFor permanently connected equipment, a readily accessible disconnect device shall be incorporated in the building installation wiring.
zzFor pluggable equipment, the socket-outlet shall be installed near the equipment and shall be easily accessible.
NOTICE (USA only):
zzThis product has a High Intensity Discharge (HID) lamp that contains mercury. Disposal may be regulated in your community due to environmental considerations. For disposal or recycling information, please visit Panasonic website: http://www.panasonic.com/environmental or call 1-888-769-0149.
For USA-California Only
This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material – special handling may apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate
ENGLISH - 3
Read this first!
WARNING:
POWER
The wall outlet or the circuit breaker shall be installed near the equipment and shall be easily accessible when problems occur. If the following problems occur, cut off the power supply immediately.
Continued use of the projector in these conditions will result in fire or electric shock. zzIf foreign objects or water get inside the projector, cut off the power supply.
zzIf the projector is dropped or the cabinet is broken, cut off the power supply.
zzIf you notice smoke, strange smells or noise coming from the projector, cut off the power supply.
Please contact an Authorized Service Center for repairs, and do not attempt to repair the projector yourself.
During a thunderstorm, do not touch the projector or the cable.
Electric shocks can result.
Do not do anything that might damage the power cord or the power plug.
If the power cord is used while damaged, electric shocks, short-circuits or fire will result.
zzDo not damage the power cord, make any modifications to it, place it near any hot objects, bend it excessively, twist it, pull it, place heavy objects on top of it or wrap it into a bundle.
Ask an Authorized Service Center to carry out any repairs to the power cord that might be necessary.
Completely insert the power plug into the wall outlet and the power connector into the projector terminal.
If the plug is not inserted correctly, electric shocks or overheating will result.
zzDo not use plugs which are damaged or wall outlets which are coming loose from the wall.
Do not use anything other than the provided power cord.
Failure to observe this will result in fire or electric shocks. Please note that if you do not use the provided power cord to ground the device on the side of the outlet, this may result in electric shocks.
Clean the power plug regularly to prevent it from becoming covered in dust.
Failure to observe this will cause a fire.
zzIf dust builds up on the power plug, the resulting humidity can damage the insulation. Pull the power plug out from the wall outlet and wipe it with a dry cloth regularly.
Do not handle the power plug and power connector with wet hands.
Failure to observe this will result in electric shocks.
Do not overload the wall outlet.
If the power supply is overloaded (ex., by using too many adapters), overheating may occur and fire will result.
ON USE/INSTALLATION
Do not place the projector on soft materials such as carpets or sponge mats.
Doing so will cause the projector to overheat, which can cause burns, fire or damage to the projector.
Do not set up the projector in humid or dusty places or in places where the projector may come into contact with oily smoke or steam, ex. a bathroom.
Using the projector under such conditions will result in fire, electric shocks or deterioration of components. Deterioration of components (such as ceiling mount brackets) may cause the projector which is mounted on the ceiling to fall down.
Do not install this projector in a place which is not strong enough to take the full weight of the projector or on top of a surface which is sloped or unstable.
Failure to observe this will cause projector to fall down or tip over the projector, and severe injury or damage could result.
4 - ENGLISH
Read this first!
WARNING:
Do not cover the air intake/exhaust ports or place anything within 500 mm (20") of them.
Doing so will cause the projector to overheat, which can cause fire or damage to the projector. zzDo not place the projector in narrow, badly ventilated places.
zzDo not place the projector on cloth or papers, as these materials could be drawn into the air inlet port.
Do not place your hands or other objects close to the air exhaust port.
Doing so will cause burns or damage your hands or other objects.
zzHeated air comes out of the air exhaust port. Do not place your hands or face, or objects which cannot withstand heat close to this port.
Do not look at or place your skin into the light emitted from the lens while the projector is being used.
Doing so can cause burns or loss of sight.
zzStrong light is emitted from the projector’s lens. Do not look at or place your hands directly into this light. zzBe especially careful not to let young children look into the lens. In addition, turn off the power and
disconnect the power plug when you are away from the projector.
Never attempt to remodel or disassemble the projector.
High voltages can cause fire or electric shocks.
zzFor any inspection, adjustment and repair work, please contact an Authorized Service Center.
Do not project an image with the lens cover attached.
Doing so can cause fire.
Do not allow metal objects, flammable objects, or liquids to enter inside of the projector. Do not allow the projector to get wet.
Doing so may cause short circuits or overheating, and result in fire, electric shock, or malfunction of the projector.
zzDo not place containers of liquid or metal objects near the projector. zzIf liquid enters inside of the projector, consult your dealer.
zzParticular attention must be paid to children.
Use the ceiling mount bracket specified by Panasonic.
Using the ceiling mount bracket other than the specified one will result in falling accidents.
zzAttach the supplied safety cable to the ceiling mount bracket to prevent the projector from falling down.
Installation work (such as ceiling mount bracket) should only be carried out by a qualified technician.
If installation is not carried out and secured correctly it can cause injury or accidents, such as electric shocks. zzDo not use anything other than an authorized ceiling mount bracket.
zzBe sure to use the provided accessory wire with an eye bolt as an extra safety measure to prevent the projector from falling down. (Install in a different location to the ceiling mount bracket.)
ENGLISH - 5
Read this first!
WARNING:
ACCESSORIES
Do not use or handle the batteries improperly, and refer to the following.
Failure to observe this will cause burns, batteries to leak, overheat, explode or catch fire. zzUse AA/R6 batteries.
zzDo not use unspecified batteries. zzDo not use chargeable batteries.
zzDo not disassemble dry cell batteries.
zzDo not heat the batteries or place them into water or fire.
zzDo not allow the + and – terminals of the batteries to come into contact with metallic objects such as necklaces or hairpins.
zzDo not store or carry batteries together with metallic objects.
zzStore the batteries in a plastic bag and keep them away from metallic objects. zzMake sure the polarities (+ and –) are correct when inserting the batteries.
zzDo not use a new battery together with an old battery or mix different types of batteries. zzDo not use batteries with the outer cover peeling away or removed.
If the battery fluid leaks, do not touch it with bare hands, and take the following measures if necessary. zzBattery fluid on your skin or clothing could result in skin inflammation or injury.
Rinse with clean water and seek medical advice immediately.
zzBattery fluid coming in contact with your eyes could result in loss of sight.
In this case, do not rub your eyes. Rinse with clean water and seek medical advice immediately.
Do not disassemble the lamp unit.
Doing so can cause electric shocks, burns, or injury.
Lamp replacement
The lamp has high internal pressure. If improperly handled, an explosion and severe injury or accidents will result.
zzThe lamp can easily explode if struck against hard objects or dropped.
zzBefore replacing the lamp, be sure to turn the power off and to disconnect the power plug from the wall outlet.
Electric shocks or explosions can result if this is not done.
zzWhen replacing the lamp, turn the power off and allow it to cool for at least one hour before handling it otherwise it can cause burns.
Do not use the supplied power cord with devices other than this projector.
zzUsing the supplied power cord with devices other than this projector may cause short circuits or overheating, and result in electric shock or fire.
Remove the depleted batteries from the remote control promptly.
zzLeaving them in the unit may result in fluid leakage, overheating, or explosion of the batteries.
CAUTION:
POWER
When disconnecting the power cord, be sure to hold the power plug and power connector.
If the power cord itself is pulled, the lead will become damaged, and fire, short-circuits or serious electric shocks will result.
When not using the projector for an extended period of time, disconnect the power plug from the wall outlet.
Failure to do so may result in fire or electric shock.
Disconnect the power plug from the wall outlet before carrying out any cleaning and replacing the unit.
Failure to do so may result in electric shock.
6 - ENGLISH
Read this first!
CAUTION:
ON USE/INSTALLATION
Do not place heavy objects on top of the projector.
Failure to observe this will cause the projector to become unbalanced and fall, which could result in damage or injury. The projector will be damaged or deformed.
Do not put your weight on this projector.
You could fall or the projector could break, and injury will result.
zzBe especially careful not to let young children stand or sit on the projector.
Do not place the projector in extremely hot locations.
Doing so will cause the outer casing or internal components to deteriorate, or result in fire. zzTake particular care in locations exposed to direct sunlight or near stoves.
Do not place your hands in the openings beside the optical lens, while shifting the lens.
Failure to observe this could cause injury.
Do not stand in front of the lens while the projector is being used.
Doing so can cause damage and burns to clothing. zzStrong light is emitted from the projector’s lens.
Do not place objects in front of the lens while the projector is being used.
Doing so can cause damage to the object and can cause the set to malfunction. zzStrong light is emitted from the projector’s lens.
Always disconnect all cables before moving the projector.
Moving the projector with cables still attached can damage the cables, which will cause fire or electric shocks to occur.
ACCESSORIES
Do not use the old lamp unit.
If used it could cause lamp explosion.
If the lamp has broken, ventilate the room immediately. Do not touch or bring your face close to the broken pieces.
Failure to observe this will cause the user to absorb the gas which was released when the lamp broke and which contains nearly the same amount of mercury as fluorescent lamps, and the broken pieces will cause injury.
zzIf you believe that you have absorbed the gas or that the gas has got into your eyes or mouth, seek medical advice immediately.
zzAsk your dealer about replacing the lamp unit and check the inside of the projector.
Do not attach the air filter unit while it is wet.
Doing so may result in electric shock or malfunctions.
zzAfter you clean the air filter units, dry them thoroughly before reattaching them.
Do not touch the fan with your fingers or any other parts of your body when changing the lamp unit.
Doing so can cause injury.
Ask your dealer about cleaning inside the projector once a year.
Continuous use while dust is accumulated inside the projector may result in fire. zzFor cleaning fee, ask your dealer.
When not using the projector for an extended period of time, remove the batteries from the remote control.
Failure to observe this will cause the batteries to leak, overheat, catch fire or explode, which may result in fire or contamination of surrounding area.
ENGLISH - 7
Read this first!
Brazil Only Brasil Apenas
Manuseio de baterias usadas
BRASIL
Após o uso, as pilhas e /ou baterias poderão ser entregues ao estabelecimento comercial ou rede de assistência técnica autorizada.
Cobrir os terminais positivo (+) e negativo (-) com uma fita isolante adesiva, antes de depositar numa caixa destinada para o recolhimento. O contato entre partes metálicas pode causar vazamentos, gerar calor, romper a blindagem e produzir fogo.
Não desmonte, não remova o invólucro, nem amasse a bateria. O gás liberado pela bateria pode irritar a garganta, danificar o lacre do invólucro ou o vazamento provocar calor, ruptura da blindagem e produzir fogo devido ao curto circuito dos terminais.
Não incinere nem aqueça as baterias, elas não podem ficar expostas a temperaturas superiores a 100 °C (212 °F). O gás liberado pela bateria pode irritar a garganta,
danificar o lacre do invólucro ou o vazamento provocar calor, ruptura da blindagem e produzir fogo devido ao curto circuito dos terminais provocado internamente.
Evite o contato com o liquido que vazar das baterias. Caso isto ocorra, lave bem a parte afetada com bastante água. Caso haja irritação, consulte um médico.
|
|
Remoção das baterias |
|
1. Pressione a guia e levante a tampa. |
2. Remova as baterias. |
(ii)
(i)
8 - ENGLISH
rrTrademarks
•Microsoft®, Windows®, Windows Vista®, and Internet Explorer® are the registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
•Mac, Mac OS, Mac OSX, and Safari are the trademarks of Apple Inc. registered in the United States and other countries.
•PJLinkTM is a trademark or pending trademark in Japan, the United States, and other countries and regions.
•HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
•VGA and XGA are trademarks of International Business Machines Corporation.
•SVGA is a registered trademark of the Video Electronics Standards Association.
•RoomView, Crestron RoomView, Crestron Connected, and Fusion RV are trademarks of Crestron Electronics, Inc.
•The font used in the on-screen displays is a Ricoh bitmap font, which is manufactured and sold by Ricoh
Company, Ltd.
•Adobe Flash Player is either a trademark or registered trademark of Adobe Systems Incorporated in the United States and/or other countries.
•Other names, company names or product names used in these operating instructions are the trademarks or registered trademarks of their respective holders.
Please note that the operating instructions do not include the ® and TM symbols.
rrIllustrations in these operating instructions
• Note that illustrations of the projector and screens may differ from the ones you actually see.
rrPage references
• In these instructions, references to pages are indicated as: ( page 00). rrTerm
•In these instructions, the “Wireless/wired remote control unit” accessories are referred to as the “Remote control”.
ENGLISH - 9
|
|
Features of the Projector |
Quick Steps |
|
For details, see the corresponding pages. |
High luminance & High color reproducibility
The unique optical and lamp drive systems achieve a high luminance and high color reproducibility while saving power.
Easy setup and improved serviceability
Extensive lineup of optional lenses allow more flexible setup of the projector.
Improved cost performance in maintenance fee
The long life filter reduces maintenance costs.
1.Set up the projector. (x page 26)
c
2.Attach the projection lens. (x page 35)
c
3.Connect with other devices. (x page 37)
c
4.Connect the power cord. (x page 41)
c
5.Switch on the projector. (x page 42)
c
6.Make initial settings.* (x page 19)
c
7.Select the input signal. (x page 45)
c
8.Adjust the image. (x page 45)
*These are the steps to be taken when you switch on the power for the first time after purchasing the projector.
10 - ENGLISH
Contents
Contents |
|
|
|
Be sure to read “Read this first!”. (x pages 2 to 8) |
||
Read this first!............................................. |
2 |
|
Projecting.................................................................. |
45 |
||
|
|
|
|
|
......................................Selecting the input signal |
45 |
Chapter 1 |
Preparation |
|
|
|
Adjusting the focus, zoom, and shift..................... |
45 |
|
|
|
Moving the lens to the home position................... |
46 |
||
Precautions for use |
14 |
|
|
|||
|
|
Adjustment range by the lens position shift |
|
|||
Cautions when transporting.................................. |
14 |
|
|
(optical shift)....................................................... |
46 |
|
Cautions when installing....................................... |
14 |
|
|
Remote control operation....................................... |
47 |
|
Security................................................................. |
|
15 |
|
|
Using the shutter function..................................... |
47 |
Disposal................................................................ |
|
16 |
|
Using the on-screen display function.................... |
47 |
|
Cautions on use.................................................... |
16 |
|
Switching the input................................................ |
48 |
||
Software information regarding this product......... |
16 |
|
Using the status function....................................... |
48 |
||
Accessories........................................................... |
|
17 |
|
Using the automatic setup function....................... |
48 |
|
Optional accessories............................................. |
18 |
|
Using the function button...................................... |
49 |
||
Start-up display........................................................ |
19 |
|
Displaying the internal test pattern........................ |
49 |
||
Initial setting (display language)............................ |
19 |
|
Changing the picture aspect ratio......................... |
49 |
||
Initial setting (projector setup)............................... |
19 |
|
Chapter 4 Settings |
|
||
About your projector............................................... |
20 |
|
|
|||
|
|
|
||||
Remote control...................................................... |
20 |
Menu navigation....................................................... |
51 |
|||
Projector body....................................................... |
21 |
|
Navigating through the menu................................ |
51 |
||
Using the remote control......................................... |
23 |
|
Main menu............................................................ |
52 |
||
Inserting and removing the batteries..................... |
23 |
|
Sub-menu............................................................. |
52 |
||
Setting Remote control ID numbers...................... |
23 |
|
[PICTURE] menu...................................................... |
55 |
||
Connecting to the projector with a cable............... |
24 |
|
[PICTURE MODE]................................................ |
55 |
||
Chapter 2 |
Getting Started |
|
|
|
[CONTRAST]........................................................ |
55 |
|
|
|
[BRIGHTNESS]..................................................... |
55 |
||
|
|
|
|
|
||
Setting up.................................................................. |
|
26 |
|
|
[COLOR]............................................................... |
56 |
Projection method................................................. |
26 |
|
|
[TINT].................................................................... |
56 |
|
Parts for ceiling mount (optional).......................... |
26 |
|
|
[COLOR TEMPERATURE]................................... |
56 |
|
Screen size and throw distance............................ |
27 |
|
|
[WHITE GAIN]....................................................... |
57 |
|
Adjusting adjustable feet....................................... |
34 |
|
|
[SYSTEM DAYLIGHT VIEW]................................ |
57 |
|
Removing/attaching the projection lens................ |
35 |
|
|
[SHARPNESS]...................................................... |
58 |
|
Removing the projection lens................................ |
35 |
|
|
[NOISE REDUCTION].......................................... |
58 |
|
Attaching the projection lens................................. |
35 |
|
|
[AI]......................................................................... |
58 |
|
Connections............................................................. |
|
37 |
|
|
[SYSTEM SELECTOR]......................................... |
59 |
Before connecting to the projector........................ |
37 |
|
|
[POSITION] menu..................................................... |
60 |
|
Connecting example: AV equipment..................... |
38 |
|
|
[SHIFT].................................................................. |
60 |
|
Connecting example: Computers.......................... |
38 |
|
|
[ASPECT].............................................................. |
60 |
|
Chapter 3 |
Basic Operation |
|
|
|
[ZOOM]................................................................. |
61 |
|
|
|
..................................................[CLOCK PHASE] |
62 |
||
Switching on/off the projector |
41 |
|
|
.........................................................[KEYSTONE] |
63 |
|
|
|
[ADVANCED MENU] menu |
64 |
|||
Connecting the power cord................................... |
41 |
|
|
|||
Power indicator |
42 |
|
|
[DIGITAL CINEMA REALITY]................................ |
64 |
|
|
|
[BLANKING] |
64 |
|||
Switching on the projector |
42 |
|
|
|||
|
|
[INPUT RESOLUTION] |
65 |
|||
Making adjustments and selections |
43 |
|
|
|||
|
|
[CLAMP POSITION] |
65 |
|||
Switching off the projector |
43 |
|
|
|||
|
|
[EDGE BLENDING] |
65 |
|||
Direct power off function |
44 |
|
|
|||
|
|
[RASTER POSITION] |
66 |
|||
|
|
|
|
|
ENGLISH - 11
Contents
[DISPLAY LANGUAGE] menu................................. |
67 |
Changing the display language............................. |
67 |
[DISPLAY OPTION] menu........................................ |
68 |
[COLOR MATCHING]........................................... |
68 |
[COLOR CORRECTION]...................................... |
69 |
[CONTRAST MODE]............................................. |
69 |
[SCREEN SETTING]............................................ |
69 |
[AUTO SIGNAL].................................................... |
70 |
[AUTO SETUP]..................................................... |
70 |
[RGB IN]................................................................ |
70 |
[DVI-D IN].............................................................. |
70 |
[HDMI IN].............................................................. |
71 |
[ON-SCREEN DISPLAY]....................................... |
71 |
[BACK COLOR].................................................... |
72 |
[STARTUP LOGO]................................................ |
72 |
[SHUTTER SETTING].......................................... |
73 |
[FREEZE].............................................................. |
73 |
[SIDE BY SIDE] (PT-DW640U only)..................... |
73 |
[CUT OFF]............................................................. |
74 |
[PROJECTOR SETUP] menu................................... |
75 |
[PROJECTOR ID]................................................. |
75 |
[PROJECTION METHOD].................................... |
75 |
[COOLING CONDITION]...................................... |
76 |
[HIGH ALTITUDE MODE]..................................... |
76 |
[LAMP SELECT]................................................... |
76 |
[LAMP RELAY]...................................................... |
77 |
[LAMP POWER].................................................... |
77 |
[STANDBY MODE]................................................ |
78 |
[SCHEDULE]........................................................ |
78 |
[STARTUP INPUT SELECT]................................. |
79 |
[RS-232C]............................................................. |
80 |
[REMOTE2 MODE]............................................... |
81 |
[STATUS].............................................................. |
81 |
[NO SIGNAL SHUT-OFF]...................................... |
82 |
[FUNCTION BUTTON].......................................... |
82 |
[DATE AND TIME]................................................. |
83 |
[SAVE ALL USER DATA]....................................... |
83 |
[LOAD ALL USER DATA]...................................... |
84 |
[INITIALIZE].......................................................... |
84 |
[SERVICE PASSWORD]....................................... |
84 |
[TEST PATTERN] menu........................................... |
85 |
[TEST PATTERN].................................................. |
85 |
[SIGNAL LIST] menu................................................ |
86 |
Registering a signal to the list............................... |
86 |
Renaming the registered data............................... |
86 |
Deleting the registered data.................................. |
86 |
Protecting the registered data............................... |
87 |
Expanding signal lock-in range............................. |
87 |
Managing the sub memory list.............................. |
87 |
[SECURITY] menu.................................................... |
89 |
|
[SECURITY PASSWORD].................................... |
89 |
|
[SECURITY PASSWORD CHANGE].................... |
89 |
|
[DISPLAY SETTING]............................................. |
89 |
|
[TEXT CHANGE]................................................... |
90 |
|
[MENU LOCK]....................................................... |
90 |
|
[MENU LOCK PASSWORD]................................. |
90 |
|
[CONTROL DEVICE SETUP]............................... |
90 |
|
[NETWORK] menu.................................................... |
92 |
|
[NETWORK SETUP]............................................. |
92 |
|
[NETWORK CONTROL]....................................... |
92 |
|
[NETWORK STATUS]........................................... |
93 |
|
Network connections............................................. |
93 |
|
Accessing from the Web browser......................... |
94 |
|
Chapter 5 |
Maintenance |
|
Lamp/Temperature/Filter indicators..................... |
110 |
|
Managing the indicated problems........................ |
110 |
|
Maintenance/replacement..................................... |
112 |
|
Before maintaining/replacing the unit................... |
112 |
|
Maintenance........................................................ |
112 |
|
Replacing the unit................................................ |
113 |
|
Troubleshooting..................................................... |
116 |
|
Chapter 6 |
Appendix |
|
Technical information............................................ |
118 |
|
PJLink protocol.................................................... |
118 |
|
Control commands via LAN................................. |
119 |
|
<SERIAL IN>/<SERIAL OUT> terminal.............. |
121 |
|
<REMOTE 2 IN> terminal................................... |
124 |
|
Two window display combination list (PT- |
|
|
DW640U only).................................................. |
125 |
|
Menu lock password........................................... |
125 |
|
List of compatible signals.................................... |
125 |
|
Specifications |
......................................................... |
127 |
Dimensions............................................................. |
|
129 |
Ceiling mount .......................bracket safeguards |
130 |
|
Index........................................................................ |
|
131 |
12 - ENGLISH
This chapter describes things you need to know or check before using the projector.
ENGLISH - 13
Chapter 1 Preparation — Precautions for use
ffThe projection lens is susceptible to effects from vibration or impact. Make sure to remove the projection lens when transporting.
Also, use a protection cover or the like to prevent dust from affecting the projection lens or the set.
ffWhen transporting the projector, hold it securely by its bottom and avoid excessive vibration and impacts. They may damage the internal parts and result in malfunctions.
ffDo not transport the projector with the adjustable feet extended. Doing so may damage the adjustable feet.
rrAlways attach the projection lens cover after attaching the projection lens.
If the cover is not attached, dust will accumulate inside and may cause malfunctions.
rrDo not set up the projector outdoors.
The projector is designed for indoor use only.
rrDo not set up the projector in the following locations.
ffPlaces where vibration and impacts occur such as in a car or vehicle: Doing so may cause damage to internal parts or malfunction.
ffNear the exhaust of an air conditioner: Depending on the conditions of use, the screen may fluctuate in rare cases due to the hot air from the air exhaust port or the heated or cooled air. Make sure that the exhaust from the projector or other equipment, or the air from the air conditioner does not blow toward the front of the projector.
ffNear lights (studio lamps, etc.) and other locations of great temperature fluctuation (“Operating environment” (x page 128)): Doing so may shorten the life of the lamp or result in deformation of the outer case and malfunctions.
ffNear high-voltage power lines or near motors: Doing so may interfere with the operation of the projector.
ffPlace where there is high-power laser equipment: Directing a laser beam onto the lens surface causes damage to the DLP chips.
rrBe sure to ask a specialized technician or your dealer when installing the product to a ceiling.
If the product is to be installed hanging from the ceiling, purchase an optional Ceiling Mount Attachment.
Model No.: ET-PKD56H (for high ceilings), ET-PKD55S (for low ceilings)
rrLens focus
The high clarity projection lens is thermally affected by the light from the light source, making the focus unstable in the period just after switching on the power. Wait at least 30 minutes with the image projected before adjusting the lens focus.
rrMake sure to set [HIGH ALTITUDE MODE] to [ON] when using the projector at elevations of
1 400 m (4 593 ft) or higher and lower than 2 700 m (8 858 ft) above sea level.
Doing so may shorten the life of the internal parts and result in malfunctions.
rrMake sure to set [HIGH ALTITUDE MODE] to [OFF] when using the projector at elevations lower than 1 400 m (4 593 ft) above sea level.
Doing so may shorten the life of the internal parts and result in malfunctions.
rrDo not install the projector at elevations of 2 700 m (8 858 ft) or higher above sea level.
Doing so may shorten the life of the internal parts and result in malfunctions.
rrDo not use the projector tilted to the right or left
Using the projector at a vertical angle that exceeds 15° may reduce product life or result in malfunction.
rrWhen installing and using the projector at an angle that exceeds 30° vertically, set [COOLING CONDITION] (x page 76).
Failure to observe this will result in malfunctions or shorten the life of the lamp or other components.
rrCautions when setting up the projector
ffTo install and use the projector via a method that does not use the adjustable feet in a floor standing installation, fix the projector using the five screw holes for ceiling mounting (Fig. 1).
(Screw diameter: M6, tapping depth inside the set: 12 mm (15/32"), torque: 4 ± 0.5 N·m)
14 - ENGLISH
Chapter 1 Preparation — Precautions for use
ffUse the adjustable feet only for the floor standing installation and for adjusting the angle. Using it for other purposes may damage the set.
6FUHZ KROHV IRU FHLOLQJ PRXQW 0
$GMXVWDEOH IHHW
)LJ 7KH SRVLWLRQV RI VFUHZ KROHV IRU FHLOLQJ PRXQW DQG DGMXVWDEOH IHHW
ffDo not stack projectors on top of each other. ffDo not hold the projector by the top surface.
ffDo not use the projector tilted at an angle that exceeds ± 15° from the horizontal plane. ffDo not block the ventilation ports (intake and exhaust) of the projector.
ffPrevent hot and cool air from the air conditioning system from blowing directly to the ventilation ports (intake and exhaust) of the projector.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PP RU ORQJHU |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PP RU ORQJHU |
|
|
|
|
PP RU ORQJHU |
||||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PP RU ORQJHU
ffDo not install the projector in a confined space.
When it is necessary to install the projector in a confined space, install the air conditioning or ventilation separately. Exhaust heat may accumulate when the ventilation is not enough, triggering the protection circuit of the projector.
ffMake a clearance of at least 20 mm (0.8") between the projector bottom and setting surface by inserting spacers (metallic) etc. between them.
When using this product, take safety measures against the following incidents. ffPersonal information being leaked via this product
ffUnauthorized operation of this product by a malicious third party ffInterfering or stopping of this product by a malicious third party
Take sufficient security measures. (x pages 89, 104) ffMake your password difficult to guess as much as possible. ffChange your password periodically.
ffPanasonic Corporation or its affiliate companies will never ask for your password directly. Do not divulge your password in case you receive such inquiries.
ffThe connecting network must be secured by a firewall, etc.
ffSet a password for the web control and restrict the users who can log in.
ENGLISH - 15
Chapter 1 Preparation — Precautions for use
To dispose of the product, ask your local authorities or dealer for correct methods of disposal.
The lamp contains mercury. When disposing of used lamp units, contact your local authorities or dealer for correct methods of disposal.
rrTo get a good picture quality
In order to view a beautiful image in higher contrast, prepare an appropriate environment. Draw curtains or blinds over windows and turn off any lights near the screen to prevent outside light or light from indoor lamps from shining onto the screen.
rrDo not touch the surface of the projection lens with your bare hands.
If the surface of the projection lens becomes dirty from fingerprints or anything else, this will be magnified and projected onto the screen. Please put the lens cover (accessory) on the projector when you do not use it.
rrDLP chips
ffThe DLP chips are precision-made. Note that in rare cases, pixels of high precision could be missing or always lit. Note that such phenomena does not indicate malfunction. This is not a malfunction.
ffDirecting a high-power laser beam onto the lens surface can damage the DLP chips.
rrDo not move the projector while it is operating or subject it to vibration or impact.
Doing so may shorten the service life of its internal components.
rrLamp
The luminous source of the projector is a high-pressure mercury lamp.
A high-pressure mercury lamp has the following characteristics. ffThe luminance of the lamp will decrease by duration of usage.
ffThe lamp may burst with a loud sound or have its service life shortened because of shock, chipping, or degradation due to cumulative operating time.
ffThe lamp life varies greatly depending on individual differences and usage conditions. In particular, frequently switching the power on/off accelerates lamp deterioration and greatly affects lamp life.
ffContinuous use for one week or longer accelerates lamp deterioration. Lamp relay function (x page 77) can be used to reduce deterioration caused by continuous use.
ffIn rare cases, the lamps burst shortly after projection starts.
ffThe risk of bursting increases when the lamp is used beyond its replacement cycle. Make sure to replace the lamp unit regularly. (“When to replace the lamp unit” (x page 114), “Replacing the lamp unit” (x page 114))
ffIf the lamp bursts, gas contained inside of the lamp is released in a form of smoke. ffIt is recommended that you store replacement lamp units for contingency.
rrAbout connections to computer or peripheral device
ffTo assure continued compliance, follow the attached installation instructions, which include using the provided power cord and shielded interface cables when connecting to computer or peripheral device.
ffUse a commercial DVI-D cable with a ferrite core.
© Panasonic Corporation 2012
This product incorporates the following software.
(1) The software which is developed independently by or for Panasonic Corporation (2)The software which is licensed under the GNU GENERAL PUBLIC LICENSE
(3)The software which is licensed under the GNU LESSER GENERAL PUBLIC LICENSE
For the license conditions of software categorized as (2) and (3), refer to the provisions of the Software license (GNU GENERAL PUBLIC LICENSE and GNU LESSER GENERAL PUBLIC LICENSE) in the supplied CD-ROM. (Those provisions are written in the original (English) because they have been stipulated by third parties.)
If you have any questions regarding the software, contact (sav.pj.gpl.pavc@ml.jp.panasonic.com) by E-mail.
16 - ENGLISH
Chapter 1 Preparation — Precautions for use
Make sure that the following accessories are provided with your projector. Numbers enclosed in < > show the number of accessories.
Wireless/wired remote control unit <1>
(N2QAYB000784)
Power cord <1>
(K2CG3YY00075)
Projection lens cover <1>
(TKPB35101)
Lens cover <1>
(TKKL5244)
(for models with attached lenses only)
CD-ROM <1>
(TXFQB02VLH4)
Power cord secure lock <1>
(TTRA0182)
AA/R6 battery <2>
(For remote control unit)
Attention
ff After unpacking the projector, discard the power cord cap and packaging material properly. ff For missing accessories, consult your dealer.
ff Store small parts in an appropriate manner, and keep them away from small children.
Note
ff The model numbers of accessories and optional components are subject to change without notice.
Contents of the supplied CD-ROM
The contents of the supplied CD-ROM are as follows.
Instruction/list (PDF) |
Operating Instructions - Functional Manual |
|
|
Multi Projector Monitoring & Control Software Operation Manual |
|
|
|
|
|
Logo Transfer Software Operating Manual |
|
|
|
|
|
List of Compatible Projector Models |
This is a list of projectors that are compatible with the |
|
|
software contained in the CD-ROM and their restrictions. |
|
Software license |
(GNU GENERAL PUBLIC LICENSE, GNU LESSER |
|
|
GENERAL PUBLIC LICENSE) |
Software |
Multi Projector Monitoring & Control Software |
This software allows you to monitor and control multiple |
|
(Windows) |
projectors connected to the LAN. |
|
Logo Transfer Software (Windows) |
This software allows you to create original images, such |
|
|
as company logos to be displayed when projection starts, |
|
|
and transfer them to the projector. |
ENGLISH - 17
Chapter 1 Preparation — Precautions for use
Optional accessories (product name) |
Model No. |
|
ET-DLE055 (fixed-focus lens), ET-DLE080 (ultra short-focus zoom lens), ET-DLE150 (short- |
Projection lens |
focus zoom lens), ET-DLE250 (medium-focus zoom lens), ET-DLE350 (long-focus zoom lens), |
|
ET-DLE450 (ultra long-focus zoom lens) |
Ceiling mount bracket |
ET-PKD56H (for high ceilings), ET-PKD55S (for low ceilings) |
|
|
Replacement lamp unit |
ET-LAD60A (1 pc), ET-LAD60AW (2 pcs) |
|
|
Replacement filter unit |
ET-EMF300 |
18 - ENGLISH
Chapter 1 Preparation — Start-up display
The initial setting screen is displayed when the projector is switched on for the first time after purchase as well as when [INITIALIZE] – [ALL USER DATA] (x page 84) is executed. Set them in accordance with circumstances.
In other occasions, you can change the settings by menu operations.
Note
ff When the projector is used for the first time, you may be required to adjust the focus, zoom, and shift to display the menu screen clearly. Refer to “Adjusting the focus, zoom, and shift” (x page 45) for details.
Select the language to show on the screen. (x page 67)
1) Press as to select the display language. |
2) Press the <ENTER> button to proceed to the |
|||||
|
|
|
|
|
|
initial setting. |
|
,1,7,$/ 6(77,1* |
|
|
|||
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3/($6( 6(/(&7 /$1*8$*(
6(/(&7
(17(5 6(7
Set each item.
1)Press as to select an item.
2)Press qw to switch the setting.
,1,7,$/ 6(77,1*
352-(&7,21 0(7+2' )5217 )/225
&22/,1* &21',7,21 )/225 6(77,1*
|
6&5((1 )250$7 |
|
|
|
|
|
|
6&5((1 326,7,21
+,*+$/7,78'( 02'( 2))
6:,7&+ 72 +,*+$/7,78'( 02'( 21 ,) 29(5 P )W
0(18 6(/(&7 &+$1*(
(17(5 6(7
ffRefer to the following pages for details.
[PROJECTION METHOD] (x page 75)
[COOLING CONDITION] (x page 76) [SCREEN FORMAT] (x page 69) [SCREEN POSITION] (x page 69) [HIGH ALTITUDE MODE] (x page 76)
3) Press the <ENTER> button.
ffConfirm the setting value to complete the initial setting.
Note
ff If you press the <MENU> button in the initial setting (projector setup) screen, you can go back to the initial setting (display language) screen.
ENGLISH - 19
Chapter 1 Preparation — About your projector
|
)URQW |
|
|
7RS |
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
%RWWRP |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1 |
Remote control indicator |
|
10 |
<AUTO SETUP> button |
|
|
|
Automatically adjusts the image display position while projecting |
|||
|
Flashes if any button in the remote control is pressed. |
|
|||
|
|
the image. |
|||
2 Power standby <v> button |
|
|
|||
|
|
[PROGRESS] is displayed on the screen while the image is |
|||
|
Sets the projector to the standby mode when the <MAIN |
|
adjusted automatically. (x page 48) |
||
|
POWER> switch on the projector is set to <ON>. |
|
11 |
<SHUTTER> button |
|
3 Power on <b> button |
|
||||
|
|
Use to temporarily turn off the image. (x page 47) |
|||
|
Starts projection when the <MAIN POWER> switch on the |
12 |
<ASPECT> button |
||
|
projector is set to <ON> and the power is switched off (standby |
||||
|
|
Switches the aspect ratio of the image. (x page 49) |
|||
|
mode). |
|
|
||
|
|
13 Lens (<FOCUS>, <ZOOM>, <SHIFT>) buttons |
|||
4 Input selection (<RGB1>, <RGB2>, <DVI-D>, <VIDEO>, |
|||||
|
Adjusts the projection lens. (x pages 43, 45) |
||||
|
<S-VIDEO>, <HDMI>) buttons |
|
|
||
|
|
14 |
<FUNCTION> button |
||
|
Switches the input signal to project. (x page 48) |
|
|||
|
|
|
You can assign a frequently used operation as a shortcut button. |
||
5 <MENU> button/<ENTER> button/asqw buttons |
|
||||
|
(x page 49) |
||||
|
Used to operate the menu screen. (x page 51) |
|
|
||
|
|
15 |
<DEFAULT> button |
||
6 |
<ON SCREEN> button |
|
|||
|
|
Resets the content of the sub-menu to the factory default. |
|||
|
Switches the on-screen display function on (displayed)/off |
|
|||
|
|
(x page 51) |
|||
|
(hidden). (x page 47) |
|
|
||
|
|
16 |
<ID SET> button |
||
7 |
<TEST PATTERN> button |
|
|||
|
|
Sets the ID number of the remote control when a system uses |
|||
|
Displays the test pattern. (x page 49) |
|
|
||
|
|
|
multiple projectors. (x page 23) |
||
8 |
Number (<0> - <9>) buttons |
|
|
||
|
17 |
<ID ALL> button |
|||
|
Used when the system uses multiple projectors. |
|
|||
|
|
|
Use to simultaneously control all the projectors with one remote |
||
|
Used to input ID numbers or passwords. |
|
|
||
|
|
|
control when a system uses multiple projectors. (x page 23) |
||
9 |
<STATUS> button |
|
|
||
|
|
|
Displays the projector information.
18 Remote control signal transmitter
19 Remote control wired terminal
Connecting to the projector with a cable (x page 24)
Attention
ff Do not drop the remote control.
ff Avoid contact with liquids or moisture.
ff Do not attempt to modify or disassemble the remote control.
Note
ff The remote control can be used within a distance of about 30 m (98'5") if pointed directly at the remote control receiver. The remote control can control at angles of up to ±15° vertically and ±30° horizontally, but the effective control range may be reduced.
ff If there are any obstacles between the remote control and the remote control signal receiver, the remote control may not operate properly. ff The signal will be reflected off the screen. However, the operating range may be limited from light reflection loss due to the screen material. ff If the remote control signal receiver directly receives strong light, such as fluorescent light, the remote control may not operate properly.
Use it in a place distant from the light source.
ff The power indicator <ON (G)/STANDBY (R)> will flash if the projector receives a remote control signal.
20 - ENGLISH
Chapter 1 Preparation — About your projector
|
)URQW |
|
6LGH |
|
|
|
|
|
|||||||||||
|
|
|
|
|
|
|
|||||||||||||
|
|
|
|
||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
)URQW
|
|
|
|
|
|
5HDU
|
|
)URQW |
|
|
|
|
|
|
|
|
|
%RWWRP |
|
8 |
Projection lens |
|
|
|
|
(for models with attached lenses only) |
|||
|
|
|
|||
9 |
Air exhaust port |
|
|
||
|
|
|
|
||
|
|
10 |
Lamp unit cover (x page 114) |
|
|
|
|
11 |
Control panel (x page 22) |
|
|
|
|
12 |
Remote control signal receiver (rear) |
||
|
|
13 |
Air intake port |
|
|
|
|
14 |
Connecting terminals (x page 22) |
|
|
|
|
15 |
<MAIN POWER> switch |
|
|
|
|
|
Turns on/off the main power. |
|
|
)URQW |
|
16 |
Security slot |
|
|
|
|
This security slot is compatible with the Kensington security |
|||
|
|
|
|||
|
|
|
cables. |
|
|
|
17 |
<AC IN> terminal |
|
|
|
|
|
|
|
||
|
|
|
Connect the supplied power cord. |
|
|
|
|
18 |
Air filter cover |
|
|
|
|
|
The air filter unit is inside. (x page 112) |
||
Warning |
|
19 |
Burglar hook port |
|
|
|
|
You can attach a commercial burglar prevention cable. |
Keep your hands and other objects away from the air exhaust port.
ffKeep your hands and face away. ffDo not insert your fingers. ffKeep heat-sensitive objects away.
Heated air from the air outlet port can cause bums, injury, or deformations.
1Power indicator <ON (G)/STANDBY (R)>
Displays the status of the power.
2Lamp indicator <LAMP1>
Displays the status of lamp 1.
3Lamp indicator <LAMP2>
Displays the status of lamp 2.
4Temperature indicator <TEMP>
Displays the internal temperature status.
5Filter indicator <FILTER>
Displays the status of the air filter unit.
6Adjustable feet
Adjusts the projection angle.
7Remote control signal receiver (front)
ENGLISH - 21
Chapter 1 Preparation — About your projector
rrControl panel
1 2
3 4
5 6 7 8
1Power standby <v> button
Sets the projector to the standby mode when the <MAIN POWER> switch on the projector is set to <ON>.
2Power on <b> button
Starts projection when the <MAIN POWER> switch on the projector is set to <ON> when the power is switched off (standby mode).
3<VIDEO> button
Switches to VIDEO input.
4<S-VIDEO> button
Switches to S-VIDEO input.
5<RGB1> button
Switches to RGB1 input.
6<RGB2> button
Switches to RGB2 input.
7<DVI-D> button
Switches to DVI-D input.
8<HDMI> button
Switches to HDMI input.
9
10
11
12 13 14
9<MENU> button
Displays and erases the main menu.
Returns to the previous screen when a sub-menu is displayed. (x page 51)
If you press the <MENU> button on the control panel for at least three seconds while the on-screen indication is off, the onscreen display is turned on.
10<LENS> button
Adjusts the focus, zoom, and shift (position) of the lens.
11<ENTER> button
Determines and executes an item in the menu screen.
12<SHUTTER> button
Use to temporarily turn off the image. (x page 47)
13asqw selection buttons
Use to select items in the menu screen, change settings, and adjust levels.
It is also used to enter [SECURITY] passwords.
14<AUTO SETUP> button
Automatically adjusts the image display position while projecting the image.
[PROGRESS] is displayed on the screen while the image is adjusted automatically. (x page 48)
rrConnecting terminals
1 |
|
2 |
3 |
4 |
|
|
|
|
|
|
|
5 |
|
|
|
|
|
6 |
|
|
|
|
||||||||||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
8 |
9 |
10 |
11 |
|||||||
|
7 |
||||||||||
1 |
<LAN> terminal |
|
|
7 |
<REMOTE 1 IN> terminal / <REMOTE 1 OUT> terminal |
||||||
|
This is a terminal to connect to the network. |
|
|
|
|
These are the terminals to connect the remote control for serial |
|||||
|
Used for control and monitoring. Image input through network |
|
|
control when the system uses multiple projectors. |
|||||||
|
connections is not possible. |
|
|
8 |
<REMOTE 2 IN> terminal |
||||||
2 |
<VIDEO IN> terminal |
|
|
||||||||
|
|
|
|
This is a terminal to remotely control the projector using the |
|||||||
|
This is a terminal to input video signals. |
|
|
|
|
external control circuit. |
|||||
3 |
<S-VIDEO IN> terminal |
|
|
9 |
<SERIAL IN> terminal |
||||||
|
This is a terminal to input S video signals. |
|
|
|
|
This is a RS-232C compatible terminal to externally control the |
|||||
4 |
<RGB 1 IN> (<R/PR>, <G/Y>, <B/PB>, <SYNC/HD>, <VD>) |
|
|
projector by connecting a computer. |
|||||||
10 |
<SERIAL OUT> terminal |
||||||||||
|
terminal |
|
|
||||||||
|
This is a terminal to input RGB signals or YCBCR/YPBPR signals. |
|
|
This is a terminal to output the signal connected to the <SERIAL |
|||||||
5 |
<HDMI IN> terminal |
|
|
|
|
IN> terminal. |
|
||||
|
|
11 |
<RGB 2 IN> terminal |
||||||||
|
This is a terminal to input HDMI signals. |
|
|
||||||||
6 |
<DVI-D IN> terminal |
|
|
|
|
This is a terminal to input RGB signals or YCBCR/YPBPR signals. |
|||||
|
|
|
|
|
|
|
This is a terminal to input DVI-D signals.
Attention
ff When a LAN cable is directly connected to the projector, the network connection must be made indoors.
22 - ENGLISH
Chapter 1 Preparation — Using the remote control
1) Open the cover. |
2) Insert the batteries and close the cover (insert |
|
the m side first). |
(ii)
(i)
ffWhen removing the batteries, perform the steps in reverse order.
When you use the system with multiple projectors, you can operate all the projectors simultaneously or each projector individually using single remote control, if a unique ID number is assigned to each projector.
After setting the ID number of the projector, set the same ID number on the remote control.
The factory default ID number of the projector is set to [ALL]. When using a single projector, press the <ID ALL> button on the remote control. Also, you can control a projector if you press the <ID ALL> button on the remote control even if you do not know the projector ID.
How to set
1)Press the <ID SET> button on the remote control.
Attention
2)Within five seconds, press the two-digit ID number set on the projector using the number (<0> - <9>) buttons.
ffIf you press the <ID ALL> button, you can operate the projectors regardless of the setting of the projector’s ID number.
ff Since the ID number of the remote control can be set without the projector, do not press the <ID SET> button carelessly. If the <ID SET> button is pressed and no number (<0> - <9>) buttons are pressed within the next five seconds, the ID number returns to its original value before the <ID SET> button was pressed.
ff The ID number set on the remote control will be stored unless it is set again. However, it will be erased if the remote control is left with dead batteries. Set the same ID number again when the batteries are replaced.
Note
ff Set the ID number of the projector from the [PROJECTOR SETUP] menu → [PROJECTOR ID] (x page 75).
ENGLISH - 23
Chapter 1 Preparation — Using the remote control
When you use the system with multiple projectors, configure the units as in the following figure. Use a commercial M3 stereo mini jack cable and connect the other devices to the <REMOTE 1 IN>/<REMOTE 1 OUT> terminals of the projector.
The remote control is effective even in places where an obstacle stands in the light path or where devices are susceptible to outside light.
&RQQHFWLQJ WHUPLQDOV
&RQQHFWLRQ WR WKH VHFRQG SURMHFWRU
0 VWHUHR PLQL MDFN FDEOHFRPPHUFLDOO\ DYDLODEOH
5HPRWH FRQWURO
&RQQHFW WR UHPRWH FRQWURO ZLUHG WHUPLQDO
Attention
ff Use a cable that is 15 m (49'2") or shorter, with 2 core shield. The remote control may not operate when the length of the cable exceeds 15 m (49'2") or when the shielding of the cable is inadequate.
24 - ENGLISH
This chapter describes about things you need to do before using the projector such as the setup and connections.
ENGLISH - 25
Chapter 2 Getting Started — Setting up
You can use the projector with any of the following four projection methods. Select the appropriate method depending on the environment.
Mounting on the ceiling and projecting forward |
Setting on a desk/floor and projecting from rear |
|
(Using the translucent screen) |
Menu item* |
Method |
Menu item* |
Method |
[PROJECTION METHOD] |
[FRONT/CEILING] |
[PROJECTION METHOD] |
[REAR/FLOOR] |
[COOLING CONDITION] |
[CEILING SETTING] |
[COOLING CONDITION] |
[FLOOR SETTING] |
Mounting on the ceiling and projecting from rear |
Setting on a desk/floor and projecting forward |
||
(Using the translucent screen) |
|
|
|
Menu item* |
Method |
Menu item* |
Method |
[PROJECTION METHOD] |
[REAR/CEILING] |
[PROJECTION METHOD] |
[FRONT/FLOOR] |
[COOLING CONDITION] |
[CEILING SETTING] |
[COOLING CONDITION] |
[FLOOR SETTING] |
*For menu item details, refer to the [PROJECTOR SETUP] menu → [PROJECTION METHOD] (x page 75) and [COOLING CONDITION] (x page 76).
You can install the projector on the ceiling using the optional ceiling mount bracket (ET-PKD56H: for high ceilings, or ET-PKD55S: for low ceilings).
ffUse only the ceiling mount brackets specified for this projector.
ffRefer to the installation manual for the ceiling mount bracket when installing the bracket and the projector.
Attention
ff To ensure projector performance and security, installation of the ceiling mount bracket must be carried out by your dealer or a qualified technician.
26 - ENGLISH
Chapter 2 Getting Started — Setting up
Refer to the following figures and table describing projection distances to install the projector. Image size and image position can be adjusted in accordance with the screen size and screen position.
3URMHFWLRQ VFUHHQ
6+ |
|
|
|
6' |
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
6: |
|
|
|
|
L (LW/LT)*
SH
SW
H
SD
|
|
|
|
|
|
|
6FUHHQ |
6+ |
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
/ /: /7 |
||
|
|
|
|
|
|||
|
|
||||||
|
+ |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/ /: /7 6: 6FUHHQ
Projection distance (m)
Image height (m)
Image width (m)
Distance (m) from the lens center to the bottom edge of the image
Image diagonal size (m)
*LW: Minimum projection distance when the zoom lens is used LT: Maximum projection distance when the zoom lens is used
Attention
ffBefore setting up, read “Precautions for use” (x pages 14 to 18).
ffDo not use the projector and the high-powered laser equipment in the same room.
Hitting of a laser beam on to the lens can damage the DLP chips.
ENGLISH - 27
Chapter 2 Getting Started — Setting up
Projection distance per projection lens
For PT-DW640U
rrWhen the screen aspect is 16:10 (unit: m)
(The dimensions of the following table contain slight error.)
|
|
|
|
|
|
|
|
|
|
Optional lens |
|
|
|
|
|
||
Lens type |
|
Standard zoom lens |
Fixed- |
|
Ultra-short focus |
|
Short focus zoom |
Medium focus zoom |
|||||||||
|
focus |
|
|
||||||||||||||
|
|
|
|
|
|
|
zoom lens |
|
lens |
|
|
|
lens |
||||
|
|
|
|
|
|
lens |
|
|
|
|
|
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Projection lens Model No. |
|
― |
ET-DLE055 |
|
ET-DLE080 |
|
ET-DLE150 |
ET-DLE250 |
|||||||||
Throw ratio*1 |
|
1.8 – 2.4:1 |
0.8:1 |
|
0.8 – 1.0:1 |
|
1.4 – 2.0:1 |
2.4 – 3.8:1 |
|||||||||
Projection screen size |
|
|
|
|
|
Projection distance (L) |
|
|
|
|
|
||||||
Screen diagonal |
Height |
Width |
Min. |
|
Max. |
Fixed |
|
Min. |
Max. |
|
Min. |
|
Max. |
Min. |
|
Max. |
|
(SD) |
(SH) |
(SW) |
|
|
|
|
|
||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
1.27 (50") |
0.673 |
1.077 |
1.92 |
|
2.56 |
0.87 |
|
0.87 |
1.09 |
|
1.45 |
|
2.12 |
2.54 |
|
4.06 |
|
1.52 (60") |
0.808 |
1.292 |
2.32 |
|
3.08 |
1.06 |
|
1.05 |
1.32 |
|
1.75 |
|
2.55 |
3.07 |
|
4.89 |
|
1.78 (70") |
0.942 |
1.508 |
2.72 |
|
3.61 |
1.24 |
|
1.23 |
1.54 |
|
2.05 |
|
2.98 |
3.59 |
|
5.72 |
|
2.03 (80") |
1.077 |
1.723 |
3.11 |
|
4.13 |
1.42 |
|
1.42 |
1.77 |
|
2.35 |
|
3.42 |
4.12 |
|
6.55 |
|
2.29 (90") |
1.212 |
1.939 |
3.51 |
|
4.65 |
1.61 |
|
1.60 |
2.00 |
|
2.65 |
|
3.85 |
4.64 |
|
7.38 |
|
2.54 (100") |
1.346 |
2.154 |
3.91 |
|
5.18 |
1.79 |
|
1.78 |
2.22 |
|
2.95 |
|
4.28 |
5.16 |
|
8.20 |
|
3.05 (120") |
1.615 |
2.585 |
4.70 |
|
6.23 |
2.16 |
|
2.15 |
2.68 |
|
3.55 |
|
5.15 |
6.21 |
|
9.86 |
|
3.81 (150") |
2.019 |
3.231 |
5.90 |
|
7.80 |
2.71 |
|
2.70 |
3.36 |
|
4.45 |
|
6.45 |
7.79 |
|
12.35 |
|
5.08 (200") |
2.692 |
4.308 |
7.88 |
|
10.42 |
3.63 |
|
3.61 |
4.49 |
|
5.95 |
|
8.61 |
10.41 |
|
16.49 |
|
6.35 (250") |
3.365 |
5.385 |
9.87 |
|
13.04 |
― |
|
4.53 |
5.62 |
|
7.45 |
|
10.78 |
13.03 |
|
20.63 |
|
7.62 (300") |
4.039 |
6.462 |
11.86 |
|
15.66 |
― |
|
5.45 |
6.76 |
|
8.95 |
|
12.95 |
15.65 |
|
24.77 |
|
8.89 (350") |
4.712 |
7.539 |
13.85 |
|
18.28 |
― |
|
6.36 |
7.89 |
|
10.46 |
|
15.11 |
18.28 |
|
28.91 |
|
10.16 (400") |
5.385 |
8.616 |
15.83 |
|
20.90 |
― |
|
7.28 |
9.02 |
|
11.96 |
|
17.28 |
20.90 |
|
33.05 |
|
12.7 (500") |
6.731 |
10.770 |
19.81 |
|
26.15 |
― |
|
9.11 |
11.29 |
|
14.96 |
|
21.61 |
26.14 |
|
41.34 |
|
15.24 (600") |
8.077 |
12.923 |
23.78 |
|
31.39 |
― |
|
10.94 |
13.55 |
|
17.96 |
|
25.94 |
31.39 |
|
49.62 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Optional lens |
|
|
|
Height position |
|
|
|
|
||||
Lens type |
|
Long focus zoom |
Ultra-long focus |
|
|
|
|
|
|
||||||||
|
|
|
(H)*2 |
|
|
|
|
|
|||||||||
|
|
|
|
lens |
zoom lens |
|
|
|
|
|
|
|
|
|
|||
Projection lens Model No. |
ET-DLE350 |
ET-DLE450 |
Standard zoom |
|
|
|
|
|
|
||||||||
Throw ratio*1 |
|
3.8 – 5.7:1 |
5.6 – 9.0:1 |
lens/ |
|
|
|
|
|
|
|||||||
|
|
|
|
|
|
|
|
|
ET-DLE080/ |
|
ET-DLE055 |
|
|
|
|||
Projection screen size |
|
Projection distance (L) |
|
|
|
|
|
||||||||||
|
|
ET-DLE150/ |
|
|
|
|
|||||||||||
|
|
|
|
|
|
|
|
|
|
(Fixed) |
|
|
|
||||
Screen diagonal |
Height |
Width |
|
|
|
|
|
|
ET-DLE250/ |
|
|
|
|
||||
Min. |
|
Max. |
Min. |
|
Max. |
|
|
|
|
|
|
||||||
|
|
ET-DLE350/ |
|
|
|
|
|
|
|||||||||
(SD) |
(SH) |
(SW) |
|
|
|
|
|
|
|
|
|||||||
|
|
|
|
|
|
ET-DLE450 |
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
1.27 (50") |
0.673 |
1.077 |
4.00 |
|
6.11 |
5.96 |
|
9.59 |
-0.07 - 0.34 |
|
0.34 |
|
|
|
|
||
1.52 (60") |
0.808 |
1.292 |
4.83 |
|
7.36 |
7.21 |
|
11.57 |
-0.08 - 0.40 |
|
0.40 |
|
|
|
|
||
1.78 (70") |
0.942 |
1.508 |
5.65 |
|
8.61 |
8.46 |
|
13.55 |
-0.09 - 0.47 |
|
0.47 |
|
|
|
|
||
2.03 (80") |
1.077 |
1.723 |
6.48 |
|
9.86 |
9.71 |
|
15.53 |
-0.11 - 0.54 |
|
0.54 |
|
|
|
|
||
2.29 (90") |
1.212 |
1.939 |
7.31 |
|
11.11 |
10.96 |
|
17.51 |
-0.12 - 0.61 |
|
0.61 |
|
|
|
|
||
2.54 (100") |
1.346 |
2.154 |
8.13 |
|
12.36 |
12.21 |
|
19.49 |
-0.13 - 0.67 |
|
0.67 |
|
|
|
|
||
3.05 (120") |
1.615 |
2.585 |
9.79 |
|
14.86 |
14.72 |
|
23.45 |
-0.16 - 0.81 |
|
0.81 |
|
|
|
|
||
3.81 (150") |
2.019 |
3.231 |
12.27 |
|
18.61 |
18.47 |
|
29.38 |
-0.20 - 1.01 |
|
1.01 |
|
|
|
|
||
5.08 (200") |
2.692 |
4.308 |
16.40 |
|
24.85 |
24.73 |
|
39.28 |
-0.27 - 1.35 |
|
1.35 |
|
|
|
|
||
6.35 (250") |
3.365 |
5.385 |
20.53 |
|
31.10 |
30.99 |
|
49.17 |
-0.34 - 1.68 |
|
― |
|
|
|
|
||
7.62 (300") |
4.039 |
6.462 |
24.67 |
|
37.34 |
37.25 |
|
59.06 |
-0.40 - 2.02 |
|
― |
|
|
|
|
||
8.89 (350") |
4.712 |
7.539 |
28.80 |
|
43.59 |
43.51 |
|
68.96 |
-0.47 - 2.36 |
|
― |
|
|
|
|
||
10.16 (400") |
5.385 |
8.616 |
32.94 |
|
49.84 |
49.76 |
|
78.85 |
-0.54 - 2.69 |
|
― |
|
|
|
|
||
12.7 (500") |
6.731 |
10.770 |
41.20 |
|
62.33 |
62.28 |
|
98.64 |
-0.67 - 3.37 |
|
― |
|
|
|
|
||
15.24 (600") |
8.077 |
12.923 |
49.47 |
|
74.82 |
74.80 |
|
118.42 |
-0.81 - 4.04 |
|
― |
|
|
|
|
*1 The throw ratio is based on the value during projection onto a 2.03-m (80") screen size.
*2 The height position (H) is SH/2 because lens shift cannot be used when a fixed-focus lens (Model No.:ET-DLE055) is attached.
28 - ENGLISH
Chapter 2 Getting Started — Setting up
rrWhen the screen aspect is 16:9 (unit: m)
(The dimensions of the following table contain slight error.)
|
|
|
|
|
|
|
|
|
|
Optional lens |
|
|
|
|
|
||
Lens type |
|
Standard zoom lens |
Fixed- |
|
Ultra-short focus |
|
Short focus zoom |
Medium focus zoom |
|||||||||
|
focus |
|
|
||||||||||||||
|
|
|
|
|
|
|
zoom lens |
|
lens |
|
|
|
lens |
||||
|
|
|
|
|
|
lens |
|
|
|
|
|
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Projection lens Model No. |
|
― |
ET-DLE055 |
|
ET-DLE080 |
|
ET-DLE150 |
ET-DLE250 |
|||||||||
Throw ratio*1 |
|
1.8 – 2.4:1 |
0.8:1 |
|
0.8 – 1.0:1 |
|
1.4 – 2.0:1 |
2.4 – 3.8:1 |
|||||||||
Projection screen size |
|
|
|
|
|
Projection distance (L) |
|
|
|
|
|
||||||
Screen diagonal |
Height |
Width |
Min. |
|
Max. |
Fixed |
|
Min. |
Max. |
|
Min. |
|
Max. |
Min. |
|
Max. |
|
(SD) |
(SH) |
(SW) |
|
|
|
|
|
||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
1.27 (50") |
0.623 |
1.107 |
1.98 |
|
2.63 |
0.90 |
|
0.89 |
1.12 |
|
1.49 |
|
2.18 |
2.62 |
|
4.18 |
|
1.52 (60") |
0.747 |
1.328 |
2.39 |
|
3.17 |
1.09 |
|
1.08 |
1.35 |
|
1.80 |
|
2.62 |
3.15 |
|
5.03 |
|
1.78 (70") |
0.872 |
1.550 |
2.79 |
|
3.71 |
1.27 |
|
1.27 |
1.59 |
|
2.11 |
|
3.07 |
3.69 |
|
5.88 |
|
2.03 (80") |
0.996 |
1.771 |
3.20 |
|
4.25 |
1.46 |
|
1.46 |
1.82 |
|
2.42 |
|
3.51 |
4.23 |
|
6.73 |
|
2.29 (90") |
1.121 |
1.992 |
3.61 |
|
4.78 |
1.65 |
|
1.65 |
2.05 |
|
2.72 |
|
3.96 |
4.77 |
|
7.58 |
|
2.54 (100") |
1.245 |
2.214 |
4.02 |
|
5.32 |
1.84 |
|
1.83 |
2.29 |
|
3.03 |
|
4.40 |
5.31 |
|
8.43 |
|
3.05 (120") |
1.494 |
2.657 |
4.84 |
|
6.40 |
2.22 |
|
2.21 |
2.75 |
|
3.65 |
|
5.29 |
6.39 |
|
10.14 |
|
3.81 (150") |
1.868 |
3.321 |
6.06 |
|
8.02 |
2.79 |
|
2.78 |
3.45 |
|
4.58 |
|
6.63 |
8.01 |
|
12.69 |
|
5.08 (200") |
2.491 |
4.428 |
8.10 |
|
10.71 |
3.73 |
|
3.72 |
4.61 |
|
6.12 |
|
8.86 |
10.70 |
|
16.95 |
|
6.35 (250") |
3.113 |
5.535 |
10.15 |
|
13.40 |
― |
|
4.66 |
5.78 |
|
7.66 |
|
11.08 |
13.40 |
|
21.21 |
|
7.62 (300") |
3.736 |
6.641 |
12.19 |
|
16.10 |
― |
|
5.60 |
6.94 |
|
9.21 |
|
13.31 |
16.09 |
|
25.46 |
|
8.89 (350") |
4.358 |
7.748 |
14.23 |
|
18.79 |
― |
|
6.54 |
8.11 |
|
10.75 |
|
15.53 |
18.79 |
|
29.72 |
|
10.16 (400") |
4.981 |
8.855 |
16.27 |
|
21.49 |
― |
|
7.48 |
9.27 |
|
12.29 |
|
17.76 |
21.48 |
|
33.98 |
|
12.7 (500") |
6.226 |
11.069 |
20.36 |
|
26.87 |
― |
|
9.36 |
11.60 |
|
15.38 |
|
22.21 |
26.87 |
|
42.49 |
|
15.24 (600") |
7.472 |
13.283 |
24.44 |
|
32.26 |
― |
|
11.24 |
13.93 |
|
18.46 |
|
26.66 |
32.26 |
|
51.00 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Optional lens |
|
|
|
Height position |
|
|
|
|
||||
Lens type |
|
Long focus zoom |
Ultra-long focus |
|
|
|
|
|
|
||||||||
|
|
|
(H)*2 |
|
|
|
|
|
|||||||||
|
|
|
|
lens |
zoom lens |
|
|
|
|
|
|
|
|
|
|||
Projection lens Model No. |
ET-DLE350 |
ET-DLE450 |
Standard zoom |
|
|
|
|
|
|
||||||||
Throw ratio*1 |
|
3.8 – 5.7:1 |
5.6 – 9.0:1 |
lens/ |
|
|
|
|
|
|
|||||||
|
|
|
|
|
|
|
|
|
ET-DLE080/ |
|
ET-DLE055 |
|
|
|
|||
Projection screen size |
|
Projection distance (L) |
|
|
|
|
|
||||||||||
|
|
ET-DLE150/ |
|
|
|
|
|||||||||||
|
|
|
|
|
|
|
|
|
|
(Fixed) |
|
|
|
||||
Screen diagonal |
Height |
Width |
|
|
|
|
|
|
ET-DLE250/ |
|
|
|
|
||||
Min. |
|
Max. |
Min. |
|
Max. |
|
|
|
|
|
|
||||||
|
|
ET-DLE350/ |
|
|
|
|
|
|
|||||||||
(SD) |
(SH) |
(SW) |
|
|
|
|
|
|
|
|
|||||||
|
|
|
|
|
|
ET-DLE450 |
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
1.27 (50") |
0.623 |
1.107 |
4.11 |
|
6.29 |
6.13 |
|
9.87 |
-0.14 - 0.31 |
|
0.31 |
|
|
|
|
||
1.52 (60") |
0.747 |
1.328 |
4.96 |
|
7.57 |
7.42 |
|
11.90 |
-0.16 - 0.37 |
|
0.37 |
|
|
|
|
||
1.78 (70") |
0.872 |
1.550 |
5.81 |
|
8.85 |
8.70 |
|
13.94 |
-0.19 - 0.44 |
|
0.44 |
|
|
|
|
||
2.03 (80") |
0.996 |
1.771 |
6.66 |
|
10.14 |
9.99 |
|
15.97 |
-0.22 - 0.50 |
|
0.50 |
|
|
|
|
||
2.29 (90") |
1.121 |
1.992 |
7.51 |
|
11.42 |
11.28 |
|
18.00 |
-0.25 - 0.56 |
|
0.56 |
|
|
|
|
||
2.54 (100") |
1.245 |
2.214 |
8.36 |
|
12.71 |
12.56 |
|
20.04 |
-0.27 - 0.62 |
|
0.62 |
|
|
|
|
||
3.05 (120") |
1.494 |
2.657 |
10.06 |
|
15.27 |
15.14 |
|
24.11 |
-0.33 - 0.75 |
|
0.75 |
|
|
|
|
||
3.81 (150") |
1.868 |
3.321 |
12.61 |
|
19.13 |
18.99 |
|
30.21 |
-0.41 - 0.93 |
|
0.93 |
|
|
|
|
||
5.08 (200") |
2.491 |
4.428 |
16.86 |
|
25.55 |
25.43 |
|
40.38 |
-0.55 - 1.25 |
|
1.25 |
|
|
|
|
||
6.35 (250") |
3.113 |
5.535 |
21.11 |
|
31.97 |
31.86 |
|
50.54 |
-0.68 - 1.56 |
|
― |
|
|
|
|
||
7.62 (300") |
3.736 |
6.641 |
25.36 |
|
38.39 |
38.29 |
|
60.71 |
-0.82 - 1.87 |
|
― |
|
|
|
|
||
8.89 (350") |
4.358 |
7.748 |
29.61 |
|
44.81 |
44.72 |
|
70.88 |
-0.96 - 2.18 |
|
― |
|
|
|
|
||
10.16 (400") |
4.981 |
8.855 |
33.86 |
|
51.23 |
51.16 |
|
81.05 |
-1.10 - 2.49 |
|
― |
|
|
|
|
||
12.7 (500") |
6.226 |
11.069 |
42.35 |
|
64.07 |
64.02 |
|
101.39 |
-1.37 - 3.11 |
|
― |
|
|
|
|
||
15.24 (600") |
7.472 |
13.283 |
50.85 |
|
76.91 |
76.88 |
|
121.73 |
-1.64 - 3.74 |
|
― |
|
|
|
|
*1 The throw ratio is based on the value during projection onto a 2.03-m (80") screen size.
*2 The height position (H) is SH/2 because lens shift cannot be used when a fixed-focus lens (Model No.:ET-DLE055) is attached.
ENGLISH - 29
Chapter 2 Getting Started — Setting up
rrWhen the screen aspect is 4:3 (unit: m)
(The dimensions of the following table contain slight error.)
|
|
|
|
|
|
|
|
|
|
Optional lens |
|
|
|
|
|
||
Lens type |
|
Standard zoom lens |
Fixed- |
|
Ultra-short focus |
|
Short focus zoom |
Medium focus zoom |
|||||||||
|
focus |
|
|
||||||||||||||
|
|
|
|
|
|
|
zoom lens |
|
lens |
|
|
|
lens |
||||
|
|
|
|
|
|
lens |
|
|
|
|
|
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Projection lens Model No. |
|
― |
ET-DLE055 |
|
ET-DLE080 |
|
ET-DLE150 |
ET-DLE250 |
|||||||||
Throw ratio*1 |
|
2.2 – 2.9:1 |
1.0:1 |
|
1.0 – 1.2:1 |
|
1.6 – 2.4:1 |
2.9 – 4.6:1 |
|||||||||
Projection screen size |
|
|
|
|
|
Projection distance (L) |
|
|
|
|
|
||||||
Screen diagonal |
Height |
Width |
Min. |
|
Max. |
Fixed |
|
Min. |
Max. |
|
Min. |
|
Max. |
Min. |
|
Max. |
|
(SD) |
(SH) |
(SW) |
|
|
|
|
|
||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
1.27 (50") |
0.762 |
1.016 |
2.18 |
|
2.90 |
0.99 |
|
0.99 |
1.24 |
|
1.65 |
|
2.40 |
2.89 |
|
4.61 |
|
1.52 (60") |
0.914 |
1.219 |
2.63 |
|
3.50 |
1.20 |
|
1.20 |
1.50 |
|
1.99 |
|
2.89 |
3.48 |
|
5.55 |
|
1.78 (70") |
1.067 |
1.422 |
3.08 |
|
4.09 |
1.41 |
|
1.40 |
1.75 |
|
2.33 |
|
3.38 |
4.08 |
|
6.48 |
|
2.03 (80") |
1.219 |
1.626 |
3.53 |
|
4.68 |
1.62 |
|
1.61 |
2.01 |
|
2.67 |
|
3.87 |
4.67 |
|
7.42 |
|
2.29 (90") |
1.372 |
1.829 |
3.98 |
|
5.28 |
1.82 |
|
1.82 |
2.26 |
|
3.00 |
|
4.36 |
5.26 |
|
8.36 |
|
2.54 (100") |
1.524 |
2.032 |
4.43 |
|
5.87 |
2.03 |
|
2.03 |
2.52 |
|
3.34 |
|
4.85 |
5.86 |
|
9.30 |
|
3.05 (120") |
1.829 |
2.438 |
5.33 |
|
7.06 |
2.45 |
|
2.44 |
3.03 |
|
4.02 |
|
5.83 |
7.04 |
|
11.17 |
|
3.81 (150") |
2.286 |
3.048 |
6.68 |
|
8.84 |
3.07 |
|
3.06 |
3.80 |
|
5.04 |
|
7.31 |
8.82 |
|
13.98 |
|
5.08 (200") |
3.048 |
4.064 |
8.93 |
|
11.80 |
4.11 |
|
4.10 |
5.09 |
|
6.74 |
|
9.76 |
11.79 |
|
18.67 |
|
6.35 (250") |
3.810 |
5.080 |
11.18 |
|
14.77 |
― |
|
5.13 |
6.37 |
|
8.44 |
|
12.21 |
14.76 |
|
23.36 |
|
7.62 (300") |
4.572 |
6.096 |
13.43 |
|
17.73 |
― |
|
6.17 |
7.65 |
|
10.14 |
|
14.66 |
17.73 |
|
28.05 |
|
8.89 (350") |
5.334 |
7.112 |
15.68 |
|
20.70 |
― |
|
7.21 |
8.93 |
|
11.84 |
|
17.11 |
20.70 |
|
32.74 |
|
10.16 (400") |
6.096 |
8.128 |
17.93 |
|
23.67 |
― |
|
8.24 |
10.22 |
|
13.54 |
|
19.56 |
23.67 |
|
37.42 |
|
12.7 (500") |
7.620 |
10.160 |
22.43 |
|
29.60 |
― |
|
10.31 |
12.78 |
|
16.94 |
|
24.47 |
29.60 |
|
46.80 |
|
15.24 (600") |
9.144 |
12.192 |
26.92 |
|
35.53 |
― |
|
12.39 |
15.35 |
|
20.34 |
|
29.37 |
35.54 |
|
56.17 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Optional lens |
|
|
|
Height position |
|
|
|
|
||||
Lens type |
|
Long focus zoom |
Ultra-long focus |
|
|
|
|
|
|
||||||||
|
|
|
(H)*2 |
|
|
|
|
|
|||||||||
|
|
|
|
lens |
zoom lens |
|
|
|
|
|
|
|
|
|
|||
Projection lens Model No. |
ET-DLE350 |
ET-DLE450 |
Standard zoom |
|
|
|
|
|
|
||||||||
Throw ratio*1 |
|
4.5 – 6.9:1 |
6.8 – 10.8:1 |
lens/ |
|
|
|
|
|
|
|||||||
|
|
|
|
|
|
|
|
|
ET-DLE080/ |
|
ET-DLE055 |
|
|
|
|||
Projection screen size |
|
Projection distance (L) |
|
|
|
|
|
||||||||||
|
|
ET-DLE150/ |
|
|
|
|
|||||||||||
|
|
|
|
|
|
|
|
|
|
(Fixed) |
|
|
|
||||
Screen diagonal |
Height |
Width |
|
|
|
|
|
|
ET-DLE250/ |
|
|
|
|
||||
Min. |
|
Max. |
Min. |
|
Max. |
|
|
|
|
|
|
||||||
|
|
ET-DLE350/ |
|
|
|
|
|
|
|||||||||
(SD) |
(SH) |
(SW) |
|
|
|
|
|
|
|
|
|||||||
|
|
|
|
|
|
ET-DLE450 |
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
1.27 (50") |
0.762 |
1.016 |
4.54 |
|
6.94 |
6.78 |
|
10.90 |
-0.08 - 0.38 |
|
0.38 |
|
|
|
|
||
1.52 (60") |
0.914 |
1.219 |
5.48 |
|
8.35 |
8.20 |
|
13.14 |
-0.09 - 0.46 |
|
0.46 |
|
|
|
|
||
1.78 (70") |
1.067 |
1.422 |
6.42 |
|
9.76 |
9.61 |
|
15.38 |
-0.11 - 0.53 |
|
0.53 |
|
|
|
|
||
2.03 (80") |
1.219 |
1.626 |
7.35 |
|
11.18 |
11.03 |
|
17.62 |
-0.12 - 0.61 |
|
0.61 |
|
|
|
|
||
2.29 (90") |
1.372 |
1.829 |
8.29 |
|
12.59 |
12.45 |
|
19.86 |
-0.14 - 0.69 |
|
0.69 |
|
|
|
|
||
2.54 (100") |
1.524 |
2.032 |
9.22 |
|
14.01 |
13.87 |
|
22.10 |
-0.15 - 0.76 |
|
0.76 |
|
|
|
|
||
3.05 (120") |
1.829 |
2.438 |
11.09 |
|
16.83 |
16.70 |
|
26.58 |
-0.18 - 0.91 |
|
0.91 |
|
|
|
|
||
3.81 (150") |
2.286 |
3.048 |
13.90 |
|
21.08 |
20.95 |
|
33.30 |
-0.23 - 1.14 |
|
1.14 |
|
|
|
|
||
5.08 (200") |
3.048 |
4.064 |
18.58 |
|
28.15 |
28.03 |
|
44.49 |
-0.30 - 1.52 |
|
1.52 |
|
|
|
|
||
6.35 (250") |
3.810 |
5.080 |
23.26 |
|
35.22 |
35.12 |
|
55.69 |
-0.38 - 1.91 |
|
― |
|
|
|
|
||
7.62 (300") |
4.572 |
6.096 |
27.94 |
|
42.29 |
42.20 |
|
66.89 |
-0.46 - 2.29 |
|
― |
|
|
|
|
||
8.89 (350") |
5.334 |
7.112 |
32.62 |
|
49.36 |
49.28 |
|
78.09 |
-0.53 - 2.67 |
|
― |
|
|
|
|
||
10.16 (400") |
6.096 |
8.128 |
37.30 |
|
56.43 |
56.37 |
|
89.29 |
-0.61 - 3.05 |
|
― |
|
|
|
|
||
12.7 (500") |
7.620 |
10.160 |
46.65 |
|
70.57 |
70.53 |
|
111.68 |
-0.76 - 3.81 |
|
― |
|
|
|
|
||
15.24 (600") |
9.144 |
12.192 |
56.01 |
|
84.71 |
84.70 |
|
134.08 |
-0.91 - 4.57 |
|
― |
|
|
|
|
*1 The throw ratio is based on the value during projection onto a 2.03-m (80") screen size.
*2 The height position (H) is SH/2 because lens shift cannot be used when a fixed-focus lens (Model No.:ET-DLE055) is attached.
30 - ENGLISH