PT-DW750BU
Table of contents
Loading...
Thank you for purchasing this Panasonic product.
■ This manual is common to all the models regardless of sufxes of the Model No.
z
for India
BD: Black model, the standard zoom lens supplied LBD: Black model, the lens sold separately
WD: White model, the standard zoom lens supplied LWD: White model, the lens sold separately
z
for Taiwan
BT: Black model, the standard zoom lens supplied
z
for other countries or regions
B: Black model, the standard zoom lens supplied LB: Black model, the lens sold separately
W: White model, the standard zoom lens supplied LW: White model, the lens sold separately
■ Before operating this product, please read the instructions carefully and save this manual
for future use.
■ Before using this product, be sure to read “Read this rst!” (
x
pages 5 to 14).
TQBJ0789-1
DLP™ Projector
Commercial Use
Operating Instructions
Functional Manual
ENGLISH
Model No.
PT-DZ780
PT-DW750
PT-DX820
2 - ENGLISH
Contents
Contents
Read this rst! 5
Chapter 1 Preparation
Precautions for use 18
Cautions when transporting
18
Cautions when installing
18
Security
20
DIGITAL LINK
20
Art-Net
20
Early Warning Software
21
Disposal
21
Cautions on use
21
Accessories
22
Optional accessories
23
About your projector
24
Remote control
24
Projector body
25
Preparing the remote control
28
Inserting and removing the batteries
28
When using the multiple projectors
28
Connecting the remote control to the projector
with a cable
29
Chapter 2 Getting Started
Setting up 31
Installation mode
31
Parts for ceiling mount (optional)
32
Projected image and throw distance
32
Adjusting adjustable feet
46
Removing/attaching the projection lens
47
Removing the projection lens
47
Attaching the projection lens
47
Connecting
49
Before connecting
49
Connecting example: AV equipment
50
Connecting example: Computers
51
Connecting example using DIGITAL LINK
52
Chapter 3 Basic Operations
Switching on/off the projector 55
Connecting the power cord
55
Power indicator
55
Switching on the projector
56
When the initial setting screen is displayed
57
Making adjustments and selections
60
Switching off the projector
61
Direct power off function
61
Projecting 62
Selecting the input signal
62
Adjusting the focus, zoom, and shift
62
Adjusting the lens position and focus when the
xed-focus lens (Model No.: ET-DLE030) is
used
63
Setting the lens position
63
Adjustment range by the lens position shift
(optical shift)
64
Operating with the remote control
66
Using the shutter function
66
Using the on-screen display function
66
Switching the input
67
Using the Status function
67
Using the Automatic setup function
68
Using the Function button
68
Displaying internal test patterns
68
Setting the remote control ID numbers
69
Chapter 4 Settings
Menu navigation 71
Navigating through the menu
71
Main menu
72
Sub-menu
73
[PICTURE] menu
76
[PICTURE MODE]
76
[CONTRAST]
76
[BRIGHTNESS]
76
[COLOR]
77
[TINT]
77
[COLOR TEMPERATURE]
77
[WHITE GAIN]
79
[GAMMA]
79
[SYSTEM DAYLIGHT VIEW]
80
[SHARPNESS]
80
[NOISE REDUCTION]
80
[AI]
81
[SYSTEM SELECTOR]
81
sRGB-compliant video
81
[POSITION] menu
83
[SHIFT]
83
[ASPECT]
83
[ZOOM]
84
[CLOCK PHASE]
85
[GEOMETRY]
85
ENGLISH - 3
Contents
[ADVANCED MENU] menu
88
[DIGITAL CINEMA REALITY]
88
[BLANKING]
88
[INPUT RESOLUTION]
89
[CLAMP POSITION]
89
[EDGE BLENDING]
90
[FRAME RESPONSE]
91
[RASTER POSITION]
92
[DISPLAY LANGUAGE] menu
93
Changing the display language
93
[DISPLAY OPTION] menu
94
[COLOR MATCHING]
94
[COLOR CORRECTION]
95
[SCREEN SETTING]
95
[AUTO SIGNAL]
96
[AUTO SETUP]
96
[BACKUP INPUT SETTING]
97
[RGB IN]
98
[DVI-D IN]
99
[HDMI IN]
101
[DIGITAL LINK IN]
102
[SDI IN]
103
[ON-SCREEN DISPLAY]
104
[CLOSED CAPTION SETTING] (for NTSC or
480i YC
B
C
R
signal input only) 106
[BACK COLOR]
106
[STARTUP LOGO]
107
[UNIFORMITY]
107
[SHUTTER SETTING]
108
[FREEZE]
108
[WAVEFORM MONITOR]
108
[CUT OFF]
110
[PROJECTOR SETUP] menu
111
[PROJECTOR ID]
111
[PROJECTION METHOD]
111
[COOLING CONDITION]
112
[LAMP SELECT]
112
[LAMP RELAY]
113
[LAMP POWER]
113
[BRIGHTNESS CONTROL]
114
[STANDBY MODE]
118
[SCHEDULE]
119
[INITIAL STARTUP]
120
[STARTUP INPUT SELECT]
120
[RS-232C]
121
[STATUS]
122
[NO SIGNAL SHUT-OFF]
124
[REMOTE2 MODE]
124
[FUNCTION BUTTON]
124
[DATE AND TIME]
124
[LENS CALIBRATION]
125
[SAVE ALL USER DATA]
126
[LOAD ALL USER DATA]
126
[INITIALIZE]
126
[SERVICE PASSWORD]
127
[P IN P] menu
128
Using P IN P function
128
[TEST PATTERN] menu
130
[TEST PATTERN]
130
[SIGNAL LIST] menu
131
Registering new signals
131
Renaming the registered signal
131
Deleting the registered signal
131
Protecting the registered signal
132
Expanding signal lock-in range
132
Sub memory
133
[SECURITY] menu
134
[SECURITY PASSWORD]
134
[SECURITY PASSWORD CHANGE]
134
[DISPLAY SETTING]
134
[TEXT CHANGE]
135
[CONTROL DEVICE SETUP]
135
[CONTROL DEVICE PASSWORD CHANGE]
136
4 - ENGLISH
Contents
[NETWORK] menu 138
[DIGITAL LINK MODE]
138
[DIGITAL LINK SETUP]
138
[DIGITAL LINK STATUS]
139
[NETWORK SETUP]
139
[NETWORK CONTROL]
140
[NETWORK STATUS]
140
[DIGITAL LINK MENU]
141
[Art-Net SETUP]
141
Network connection
142
Connecting to a twisted-pair-cable transmitter
143
Accessing from the web browser
144
Chapter 5 Maintenance
Lamp/temperature/lter indicators 162
When an indicator lights up
162
Maintenance/replacement
164
Before performing maintenance/replacement
164
Maintenance
164
Replacement
166
Troubleshooting
169
[SELF TEST] indications
171
Chapter 6 Appendix
Technical information 174
PJLink protocol
174
Using Art-Net function
175
Control commands via LAN
177
<SERIAL IN>/<SERIAL OUT> terminal
180
<REMOTE 2 IN> terminal
184
Two-window display combination list
185
Control device password
185
Upgrade Kit
186
List of compatible signals
186
Specications
189
Dimensions
193
Precautions for attaching the Ceiling Mount
Bracket
194
Index
195
ENGLISH - 5
Read this rst!
Read this rst!
WARNING: THIS APPARATUS MUST BE EARTHED.
WARNING: To prevent damage which may result in re or shock hazard, do not expose this appliance to rain
or moisture.
This device is not intended for use in the direct eld of view at visual display workplaces. To avoid
incommoding reexions at visual display workplaces this device must not be placed in the direct
eld of view.
The equipment is not intended for used at a video workstation in compliance BildscharbV.
The sound pressure level at the operator position is equal or less than 70 dB (A) according to ISO 7779.
WARNING:
1. Remove the plug from the mains socket when this unit is not in use for a prolonged period of time.
2. To prevent electric shock, do not remove cover. No user serviceable parts inside. Refer servicing to qualied
service personnel.
3. Do not remove the earthing pin on the mains plug. This apparatus is equipped with a three prong earthing-
type mains plug. This plug will only t an earthing-type mains socket. This is a safety feature. If you are
unable to insert the plug into the mains socket, contact an electrician. Do not defeat the purpose of the
earthing plug.
WARNING:
This equipment is compliant with Class A of CISPR32.
In a residential environment this equipment may cause radio interference.
WARNING (Australia and Newzealand):
This is a class A product. In a domestic environment this product may cause radio interference in which case
the user may be required to take adequate measures.
CAUTION: To assure continued compliance, follow the attached installation instructions. This includes using
the provided power cord and shielded interface cables when connecting to computer or peripheral
devices. Also, any unauthorized changes or modications to this equipment could void the user’s
authority to operate this device.
This is a device to project images onto a screen, etc., and is not intended for use as indoor lighting in a
domestic environment.
Directive 2009/125/EC
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT
TO RAIN OR MOISTURE.
WARNING: RISK OF ELECTRIC SHOCK. DON’T OPEN
Indicated on the projector
The lightning ash with arrowhead symbol, within an equilateral triangle, is intended to alert the
user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may
be of sufcient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of
important operating and maintenance (servicing) instructions in the literature accompanying the
product.
6 - ENGLISH
Read this rst!
WARNING: TURN THE POWER OFF AND DISCONNECT THE POWER PLUG FROM THE WALL OUTLET
BEFORE REPLACING THE LAMP UNIT.
CAUTION (North/Middle/South America)
Power Supply: This Projector is designed to operate on 100 V - 240 V, 50 Hz/60 Hz AC, house current only.
CAUTION: The AC power cord which is supplied with the projector as an accessory can only be used for
power supplies up to 125 V. If you need to use higher voltages than this, you will need to obtain a
separate 250 V power cord. If you use the accessory cord in such situations, re may result.
CAUTION (North/Middle/South America/Taiwan)
This equipment is equipped with a three-pin grounding-type power plug. Do not
remove the grounding pin on the power plug. This plug will only t a grounding-type
power outlet. This is a safety feature. If you are unable to insert the plug into the
outlet, contact an electrician. Do not defeat the purpose of the grounding plug.
Do not remove
WARNING (USA and Canada)
f
Not for use in a computer room as dened in the Standard for the Protection of Electronic Computer/Data
Processing Equipment, ANSI/NFPA 75.
f
For permanently connected equipment, a readily accessible disconnect device shall be incorporated in the
building installation wiring.
f
For pluggable equipment, the socket-outlet shall be installed near the equipment and shall be easily
accessible.
For USA-California Only
This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material – special handling
may apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate
NOTICE USA only:
f
This product has a High Intensity Discharge (HID) lamp that contains mercury. Disposal may be regulated
in your community due to environmental considerations. For disposal or recycling information, please visit
Panasonic website: http://www.panasonic.com/environmental or call 1-888-769-0149.
NOTIFICATION (Canada)
This class A digital apparatus complies with Canadian ICES-003.
Contains mercury / Contenu avec mercure
For more information on safe handling
procedures, the measures to be taken in
case of accidental breakage and safe
disposal options visit:
ec.gc.ca/mercure-mercury/.
Dispose of or recycle in accordance with
applicable laws.
Pour plus de renseignements sur les
procédures de manutention sécuritaire, les
mesures à prendre en cas de bris accidentel et
les options d’élimination sécuritaire visitez :
ec.gc.ca/mercure-mercury/.
Mettez au rebut ou recyclez conformément
aux lois applicables.
ENGLISH - 7
Read this rst!
FCC NOTICE (USA)
Verication
Model Number: PT-DZ780B / PT-DZ780W / PT-DZ780LB / PT-DZ780LW /
PT-DW750B / PT-DW750W / PT-DW750LB / PT-DW750LW /
PT-DX820B / PT-DX820W / PT-DX820LB / PT-DX820LW
Trade Name: Panasonic
Responsible Party: Panasonic Corporation of North America
Address: Two Riverfront Plaza, Newark, NJ 07102-5490
General Contact: http://www.panasonic.com/support
Projector Contact: http://panasonic.net/avc/projector/
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Caution:
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to correct the interference at his own
expense.
FCC Warning:
To assure continued compliance, follow the attached installation instructions. This includes using the provided
power cord and shielded interface cables when connecting to computer or peripheral devices. Also, any
unauthorized changes or modications to this equipment could void the user’s authority to operate this device.
8 - ENGLISH
Read this rst!
IMPORTANT: THE MOLDED PLUG (U.K. only)
FOR YOUR SAFETY, PLEASE READ THE FOLLOWING TEXT CAREFULLY.
This appliance is supplied with a molded three pin mains plug for your safety and convenience. A 13 amp fuse
is tted in this plug. Should the fuse need to be replaced, please ensure that the replacement fuse has a rating
of 13 amps and that it is approved by ASTA or BSI to BS1362.
Check for the ASTA mark
or the BSI mark on the body of the fuse.
If the plug contains a removable fuse cover, you must ensure that it is retted when the fuse is replaced. If you
lose the fuse cover, the plug must not be used until a replacement cover is obtained. A replacement fuse cover
can be purchased from an Authorized Service Center.
If the tted molded plug is unsuitable for the mains socket in your home, then the fuse should be
removed and the plug cut off and disposed of safely. There is a danger of severe electrical shock if the
cut off plug is inserted into any 13 amp socket.
If a new plug is to be tted, please observe the wiring code as shown below.
If in any doubt, please consult a qualied electrician.
WARNING: THIS APPLIANCE MUST BE EARTHED.
IMPORTANT: The wires in this mains lead are colored in accordance with the following code:
Green - and - Yellow: Earth
Blue: Neutral
Brown: Live
As the colors of the wire in the mains lead of this appliance may not correspond with the colored markings
identifying the terminals in your plug, proceed as follows.
The wire which is colored GREEN - AND - YELLOW must be connected to the terminal in the plug
which is marked with the letter E or by the Earth symbol
or colored GREEN or GREEN - AND -
YELLOW.
The wire which is colored BLUE must be connected to the terminal in the plug which is marked
with the letter N or colored BLACK.
The wire which is colored BROWN must be connected to the terminal in the plug which is marked
with the letter L or colored RED.
How to replace the fuse: Open the fuse compartment with a screwdriver and replace the fuse.
13A250V
BS1363/A
HE-8
N
ASA
L
Importer’s name and address within the European Union
Panasonic Marketing Europe GmbH
Panasonic Testing Center
Winsbergring 15, 22525 Hamburg, Germany
ENGLISH - 9
Read this rst!
WARNING:
r
POWER
The wall outlet or the circuit breaker shall be installed near the equipment and shall be easily accessible
when problems occur. If the following problems occur, cut off the power supply immediately.
Continued use of the projector in these conditions will result in re or electric shock.
f
If foreign objects or water get inside the projector, cut off the power supply.
f
If the projector is dropped or the cabinet is broken, cut off the power supply.
f
If you notice smoke, strange smells or noise coming from the projector, cut off the power supply.
Please contact an Authorized Service Center for repairs, and do not attempt to repair the projector yourself.
During a thunderstorm, do not touch the projector or the cable.
Electric shocks can result.
Do not do anything that might damage the power cord or the power plug.
If the power cord is used while damaged, electric shocks, short-circuits or re will result.
f
Do not damage the power cord, make any modications to it, place it near any hot objects, bend it
excessively, twist it, pull it, place heavy objects on top of it or wrap it into a bundle.
Ask an Authorized Service Center to carry out any repairs to the power cord that might be necessary.
Do not use anything other than the provided power cord.
Failure to observe this will result in electric shocks or re. Please note that if you do not use the provided power
cord to ground the device on the side of the outlet, this may result in electric shocks.
Completely insert the power plug into the wall outlet and the power connector into the projector terminal.
If the plug is not inserted correctly, electric shocks or overheating will result.
f
Do not use plugs which are damaged or wall outlets which are coming loose from the wall.
Do not handle the power plug and power connector with wet hands.
Failure to observe this will result in electric shocks.
Do not overload the wall outlet.
If the power supply is overloaded (ex., by using too many adapters), overheating may occur and re will result.
Clean the power plug regularly to prevent it from becoming covered in dust.
Failure to observe this will cause a re.
f
If dust builds up on the power plug, the resulting humidity can damage the insulation.
f
If not using the projector for an extended period of time, pull the power plug out from the wall outlet.
Pull the power plug out from the wall outlet and wipe it with a dry cloth regularly.
10 - ENGLISH
Read this rst!
WARNING:
r
ON USE/INSTALLATION
Do not place the projector on soft materials such as carpets or sponge mats.
Doing so will cause the projector to overheat, which can cause burns, re or damage to the projector.
Do not set up the projector in humid or dusty places or in places where the projector may come into
contact with oily smoke or steam.
Using the projector under such conditions will result in re, electric shocks or deterioration of components.
Deterioration of components (such as ceiling mount brackets) may cause the projector which is mounted on the
ceiling to fall down.
Do not install this projector in a place which is not strong enough to take the full weight of the projector
or on top of a surface which is sloped or unstable.
Failure to observe this will cause projector to fall down or tip over the projector, and severe injury or damage
could result.
Do not cover the air intake/exhaust ports or place anything within 500 mm (20") of them.
Doing so will cause the projector to overheat, which can cause re or damage to the projector.
f
Do not place the projector in narrow, badly ventilated places.
f
Do not place the projector on cloth or papers, as these materials could be drawn into the air intake port.
Do not place your hands or other objects close to the air exhaust port.
Doing so will cause burns or damage your hands or other objects.
f
Heated air comes out of the air exhaust port. Do not place your hands or face, or objects which cannot
withstand heat close to this port.
Do not look at or place your skin into the light emitted from the lens while the projector is being used.
Doing so can cause burns or loss of sight.
f
Strong light is emitted from the projector’s lens. Do not look at or place your hands directly into this light.
f
Be especially careful not to let young children look into the lens. In addition, turn off the power and switch
off the main power when you are away from the projector.
Do not project an image with the lens cover attached.
Doing so can cause re.
Never attempt to remodel or disassemble the projector.
High voltages can cause re or electric shocks.
f
For any inspection, adjustment and repair work, please contact an Authorized Service Center.
Do not allow metal objects, ammable objects, or liquids to enter inside of the projector. Do not allow
the projector to get wet.
Doing so may cause short circuits or overheating, and result in re, electric shock, or malfunction of the
projector.
f
Do not place containers of liquid or metal objects near the projector.
f
If liquid enters inside of the projector, consult your dealer.
f
Particular attention must be paid to children.
Use the ceiling mount bracket specied by Panasonic.
Using the ceiling mount bracket other than the specied one will result in falling accidents.
f
Attach the supplied safety cable to the ceiling mount bracket to prevent the projector from falling down.
Installation work (such as ceiling mount bracket) should only be carried out by a qualied technician.
If installation is not carried out and secured correctly, it can cause injury or accidents, such as electric shocks.
f
Be sure to use the wire provided with the ceiling mount bracket as an extra safety measure to prevent the
projector from falling down. (Install in a different location to the ceiling mount bracket.)
ENGLISH - 11
Read this rst!
WARNING:
r
ACCESSORIES
Do not use or handle the batteries improperly, and refer to the following.
Failure to observe this will cause burns, batteries to leak, overheat, explode or catch re.
f
Do not use unspecied batteries.
f
Do not use chargeable batteries.
f
Do not disassemble dry cell batteries.
f
Do not heat the batteries or place them into water or re.
f
Do not allow the + and – terminals of the batteries to come into contact with metallic objects such as
necklaces or hairpins.
f
Do not store or carry batteries together with metallic objects.
f
Store the batteries in a plastic bag and keep them away from metallic objects.
f
Make sure the polarities (+ and –) are correct when inserting the batteries.
f
Do not use a new battery together with an old battery or mix different types of batteries.
f
Do not use batteries with the outer cover peeling away or removed.
If the battery uid leaks, do not touch it with bare hands, and take the following measures if necessary.
f
Battery uid on your skin or clothing could result in skin inammation or injury.
Rinse with clean water and seek medical advice immediately.
f
Battery uid coming in contact with your eyes could result in loss of sight.
In this case, do not rub your eyes. Rinse with clean water and seek medical advice immediately.
Do not disassemble the lamp unit.
If the lamp breaks, it could cause injury.
Lamp replacement
The lamp has high internal pressure. If improperly handled, an explosion and severe injury or accidents will
result.
f
The lamp can easily explode if struck against hard objects or dropped.
f
Before replacing the lamp unit, be sure to turn the power off and to disconnect the power plug from the wall
outlet.
Electric shocks or explosions can result if this is not done.
f
When replacing the lamp unit, turn the power off and allow the lamp to cool for at least one hour before
handling it otherwise it can cause burns.
Do not allow children to reach the batteries.
Accidentally swallowing them can cause physical harm.
f
If swallowed, seek medical advice immediately.
Remove the depleted batteries from the remote control promptly.
f
Leaving them in the unit may result in uid leakage, overheating, or explosion of the batteries.
12 - ENGLISH
Read this rst!
CAUTION:
r
POWER
When disconnecting the power cord, be sure to hold the power plug and power connector.
If the power cord itself is pulled, the lead will become damaged, and re, short-circuits or serious electric shocks
will result.
When not using the projector for an extended period of time, disconnect the power plug from the wall
outlet.
Failure to do so may result in re or electric shock.
Before replacing the projection lens, be sure to turn off the power and disconnect the power plug from
the wall outlet.
f
Unexpected projection of light may cause injury to eyes.
f
Replacing the projection lens without removing the power plug may result in electric shock.
Disconnect the power plug from the wall outlet before carrying out any cleaning.
Failure to do so may result in electric shock.
r
ON USE/INSTALLATION
Do not place heavy objects on top of the projector.
Failure to observe this will cause the projector to become unbalanced and fall, which could result in damage or
injury. The projector will be damaged or deformed.
Do not put your weight on this projector.
You could fall or the projector could break, and injury will result.
f
Be especially careful not to let young children stand or sit on the projector.
Do not place the projector in extremely hot locations.
Doing so will cause the outer casing or internal components to deteriorate, or result in re.
f
Take particular care in locations exposed to direct sunlight or near heaters.
Do not install the projector in a location where salt pollution or corrosive gas may occur.
Doing so may result in falling due to corrosion.
Do not place your hands in the openings beside the optical lens, while shifting the lens.
Failure to observe this could cause injury.
Do not stand in front of the lens while the projector is being used.
Doing so can cause damage and burns to clothing.
f
Extremely strong light is emitted from the projector’s lens.
Do not place objects in front of the lens while the projector is being used.
Doing so can cause re, damage to an object, or malfunction of the projector.
f
Extremely strong light is emitted from the projector’s lens.
Always disconnect all cables before moving the projector.
Moving the projector with cables still attached can damage the cables, which will cause re or electric shocks to
occur.
When mounting the projector on the ceiling, keep mounting screws and power cord from contact with
metal parts inside the ceiling.
Contact with metal parts inside the ceiling can cause electric shocks.
ENGLISH - 13
Read this rst!
CAUTION:
r
ACCESSORIES
Do not use the old lamp unit.
If used it could cause lamp explosion.
If the lamp has broken, ventilate the room immediately. Do not touch or bring your face close to the
broken pieces.
Failure to observe this will cause the user to absorb the gas which was released when the lamp broke and
which contains nearly the same amount of mercury as uorescent lamps, and the broken pieces will cause
injury.
f
If you believe that you have absorbed the gas or that the gas has got into your eyes or mouth, seek medical
advice immediately.
f
Ask your dealer about replacing the lamp unit and check the inside of the projector.
When not using the projector for an extended period of time, remove the batteries from the remote
control.
Failure to observe this will cause the batteries to leak, overheat, catch re or explode, which may result in re
or contamination of surrounding area.
r
MAINTENANCE
Do not touch the fan with your ngers or any other parts of your body when removing the lamp unit or
the air lter.
Doing so can cause injury.
Ask your dealer about cleaning inside the projector once a year.
Continuous use while dust is accumulated inside the projector may result in re.
f
For cleaning fee, ask your dealer.
To remove the battery
Remote Control Battery
1. Press the guide and lift the cover.
(ii)
(i)
2. Remove the batteries.
14 - ENGLISH
Read this rst!
Brazil Only
Brasil Apenas
r
Manuseio de baterias usadas
BRASIL
Após o uso, as pilhas e/ou baterias deverão
ser entregues ao estabelecimento comercial
ou rede de assistência técnica autorizada.
Cobrir os terminais positivo (+) e negativo (-) com uma ta isolante adesiva, antes de depositar numa caixa
destinada para o recolhimento. O contato entre partes metálicas pode causar vazamentos, gerar calor, romper
a blindagem e produzir fogo. (Fig. 1)
Fig. 1
Como isolar os terminais
Não desmonte, não remova o invólucro, nem amasse a bateria. O gás liberado pela bateria pode irritar a
garganta, danicar o lacre do invólucro ou o vazamento provocar calor, ruptura da blindagem e produzir fogo
devido ao curto circuito dos terminais. Não incinere nem aqueça as baterias, elas não podem car expostas a
temperaturas superiores a 100 °C (212 °F). O gás liberado pela bateria pode irritar a garganta, danicar o lacre
do invólucro ou o vazamento provocar calor, ruptura da blindagem e produzir fogo devido ao curto circuito dos
terminais provocado internamente.
Evite o contato com o liquido que vazar das baterias. Caso isto ocorra, lave bem a parte afetada com bastante
água. Caso haja irritação, consulte um médico.
r
Remoção das baterias
1. Pressione a guia e levante a tampa.
(ii)
(i)
2. Remova as baterias.
Fita Isolante
Fita Isolante
ENGLISH - 15
rTrademarks
f Windows, Windows Vista, and Internet Explorer are registered trademarks or trademarks of Microsoft
Corporation in the United States and other countries.
f Mac, Mac OS, OS X, and Safari are trademarks of Apple Inc., registered in the United States and other
countries.
f PJLink
TM
is a registered trademark or pending trademark in Japan, the United States, and other countries and
regions.
f HDMI, the HDMI Logo, and High-Denition Multimedia Interface are trademarks or registered trademarks of
HDMI Licensing LLC in the United States and other countries.
f RoomView and Crestron RoomView are registered trademarks of Crestron Electronics, Inc.
Crestron Connected
TM
and Fusion RV are trademarks of Crestron Electronics, Inc.
f HDBaseT
TM
is a trademark of HDBaseT Alliance.
f Art-Net
TM
Designed by and Copyright Artistic Licence Holdings Ltd
f Adobe, Adobe Flash Player, and Adobe Reader are trademarks or registered trademarks of Adobe Systems Inc.
in the United States and/or other countries.
f Some of the fonts used in the on-screen menu are Ricoh bitmap fonts, which are manufactured and sold by
Ricoh Company, Ltd.
f All other names, company names, and product names mentioned in this manual are trademarks or registered
trademarks of their respective owners.
Please note that the
®
and
TM
symbols are not specied in this manual.
rIllustrations in this manual
f Illustrations of the projector, screen, and other parts may vary from the actual product.
rReference pages
f Reference pages in this manual are indicated as (x page 00).
rTerm
f In this manual, the “Wireless/wired remote control unit” accessory is referred to as “Remote control”.
16 - ENGLISH
Features of the Projector
High luminance & quietness
▶ With the unique optical system and
unique cooling system, high luminance of
8 200 lm
*1*2
and quietness of noise level
30 dB
*2
are achieved.
*1 For PT-DX820
7 000 lm for PT-DZ780 and PT-DW750
*2 Measurement, measuring conditions and method of notation
all comply with ISO21118 international standards.
Easy and highly exible setup
▶ Easy and highly exible setup is achieved
with DIGITAL LINK compatibility, Art-Net
compatibility, 3G-SDI standard support
*1
,
geometric adjustment function standard
support, and lineup of various optional
lenses.
*1 Only for PT-DZ780
Reduction of maintenance cost
▶ In addition to realizing the long life with
lamp replacement recommended time
of 6 000H
*1
, by adopting the dustproof
mechanism in the optical block contributes
to reduction of the maintenance cost.
*1 When [LAMP POWER] is set to [ECO].
Quick Steps
For details, refer to the corresponding pages.
1. Set up the projector.
(x page 31)
2. Attach the projection lens.
(x page 47)
3. Connect with external devices.
(x page 49)
4. Connect the power cord.
(x page 55)
5. Switch on the projector.
(x page 56)
6. Make initial settings.
(x page 57)
f Take this step when you switch on the
power for the rst time after purchasing the
projector.
7. Select the input signal.
(x page 62)
8. Adjust the image.
(x page 62)
ENGLISH - 17
Chapter 1 Preparation
This chapter describes things you need to know or check before using the projector.
Chapter 1 Preparation — Precautions for use
18 - ENGLISH
Precautions for use
Cautions when transporting
f If you purchased the projector with the standard zoom lens, remove the lens cushion before use, and store it for
the future use. When transporting the projector, move the lens position to the home position and attach the lens
cushion.
If you purchased the projector with the lens sold separately, remove the lens hole cover before use, and store
it for the future use. When transporting the projector, move the lens position to the home position, remove the
projection lens, and then attach the lens hole cover.
For the steps to move the lens position to the home position, refer to “Setting the lens position” (x page 63).
Lens hole cover
Lens cushion
f When transporting the projector, hold it securely by its bottom and avoid excessive vibration and impacts. They
may damage the internal components and result in malfunctions.
f Do not transport the projector with the adjustable feet extended. Doing so may damage the adjustable feet.
Cautions when installing
rAfter attaching the projection lens, be sure to attach the lens mount cover.
Otherwise dust will accumulate inside and may cause malfunctions.
rDo not set up the projector outdoors.
The projector is designed for indoor use only.
rDo not set up the projector in the following locations.
f Places where vibration and impacts occur such as in a car or vehicle: Doing so may cause damage to internal
components or malfunction.
f Location close to sea or where corrosive gas may occur: The projector may fall due to corrosion. Also, it may
shorten the life of the components and result in malfunctions.
f Near the exhaust of an air conditioner: Depending on the conditions of use, the screen may uctuate in rare
cases due to the heated air from the air exhaust port or the hot or cooled air. Make sure that the exhaust
from the projector or other equipment, or the air from the air conditioner does not blow toward the front of the
projector.
f Places with sharp temperature uctuations such as near lights (studio lamps): Doing so may shorten the life of
the lamp, or result in deformation of the outer case due to heat, which may cause malfunctions.
The operating environment temperature of the projector should be between 0 °C (32 °F) and 45 °C (113 °F)
when using it at elevations lower than 1 400 m (4 593') above sea level, and between 0 °C (32 °F) and 40 °C
(104 °F) when using it at high altitudes (between 1 400 m (4 593') and 2 700 m (8 858') above sea level).
f Near high-voltage power lines or near motors: Doing so may interfere with the operation of the projector.
f Places where there is high-power laser equipment: Directing a laser beam onto the projection lens surface
causes damage to the DLP chips.
rBe sure to ask a specialized technician or your dealer when installing the projector on
a ceiling.
The optional Ceiling Mount Bracket is required.
Model No.: ET-PKD120H (for high ceilings), ET-PKD120S (for low ceilings), ET-PKD130H (for High Ceilings,
6-axis Adjustment), ET-PKD130B (Projector Mount Bracket)
Chapter 1 Preparation — Precautions for use
ENGLISH - 19
rAsk a qualied technician or your dealer to install the cable wiring for DIGITAL LINK
connection.
Image and sound may be disrupted if cable transmission characteristics cannot be obtained due to inadequate
installation.
rThe projector may not work properly due to strong radio wave from the broadcast
station or the radio.
If there is any facility or equipment, which outputs strong radio waves, near the installation location, install the
projector at a location sufciently far from the source of the radio waves. Or, wrap the LAN cable connected to the
<DIGITAL LINK/LAN> terminal using a piece of metal foil or a metal pipe which is grounded at both ends.
rFocus adjustment
The high clarity projection lens is thermally affected by the light from the light source, making the focus unstable in
the period just after switching on the power. It is recommended that images be projected continuously for at least
30 minutes before the focus is adjusted.
rDo not install the projector at elevations of 2 700 m (8 858') or higher above sea level.
Doing so may shorten the life of the components and result in malfunctions.
rDo not use the projector tilted to the right or left.
Using the projector at a vertical angle that exceeds ±15° may reduce product life or result in malfunction.
rCautions when setting up the projector
f Use the adjustable feet only for the oor standing installation and for adjusting the angle. Using them for other
purposes may damage the projector.
f When installing the projector in a location other than on the oor using the adjustable feet or the ceiling mount,
use the ve screw holes for ceiling mount for xing the projector (as shown in the gure).
(Screw diameter: M6, tapping depth inside the projector: 12 mm (15/32"), torque: 4 ± 0.5 N·m)
Make sure that there is no clearance between the screw holes for ceiling mount on the projector bottom and the
setting surface by inserting spacers (metallic) between them.
Screw holes for ceiling mount (M6)
Adjustable feet
The positions of screw holes for ceiling mount and adjustable feet
f Do not stack projectors on top of each other.
f Do not use the projector supporting it by the top.
f Do not use the projector tilted at an angle that exceeds ±15° from the horizontal plane.
f Do not block the ventilation ports (intake and exhaust) of the projector.
Chapter 1 Preparation — Precautions for use
20 - ENGLISH
f Prevent hot and cool air from the air conditioning system to blow directly to the ventilation ports (intake and
exhaust) of the projector.
+15° or less
-15° or less
100 mm (4") or longer
500 mm (20") or longer 500 mm (20") or longer
500 mm (20") or longer
f Do not install the projector in a conned space.
When installing the projector in a conned space, provide air conditioning or ventilation separately. Exhaust heat
may accumulate when the ventilation is not enough, triggering the protection circuit of the projector.
Security
When using this product, take safety measures against the following incidents.
f Personal information being leaked via this product
f Unauthorized operation of this product by a malicious third party
f Interfering or stopping of this product by a malicious third party
Take sufcient security measures. (x pages 134, 157)
f Make your password difcult to guess as much as possible.
f Change your password periodically.
f Panasonic Corporation or its afliate companies will never ask for your password directly. Do not divulge your
password in case you receive such inquiries.
f The connecting network must be secured by a rewall, etc.
f Set a password for the web control and restrict the users who can log in.
DIGITAL LINK
“DIGITAL LINK” is a technology to transmit the video, audio, Ethernet, and serial control signals using a twisted
pair cable by adding unique functions by Panasonic to the HDBaseT
TM
communication standard formulated by
HDBaseT Alliance.
This projector supports the optional Panasonic DIGITAL LINK output supported device (Model No.: ET-YFB100G,
ET-YFB200G) and peripheral devices by other manufacturers (twisted-pair-cable transmitters such as the
“XTP transmitter” of Extron Electronics) that use the same HDBaseT
TM
standard. For the devices of other
manufacturers that the operation has been veried with this projector, refer to Panasonic website (http://
panasonic.net/avc/projector/). Note that the verication for devices of other manufacturers has been made for the
items set by Panasonic Corporation, and not all the operations have been veried. For operation or performance
problems caused by the devices of other manufacturers, contact the respective manufacturers. In addition, the
projector does not support audio transmission because it is not equipped with audio function.
Art-Net
“Art-Net” is an Ethernet communication protocol based on the TCP/IP protocol.
By using the DMX controller or application software, illumination and stage system can be controlled. Art-Net is
made based on DMX512 communication protocol.
Chapter 1 Preparation — Precautions for use
ENGLISH - 21
Early Warning Software
The projector supports “Early Warning Software”, which monitors the status of the display (projector and at panel
display) and the peripheral devices inside an intranet, and noties of abnormality of such equipment and detects
signs of possible abnormality. Also, maintenance can be performed in advance, because this software gives
notication of approximate time to replace consumables of the display, to clean each part of the display, and to
replace the components of the display.
Depending on the type of license, the number of displays that can be registered for monitoring varies. Limited to
the rst 90 days after installation in a computer, it is possible to register up to 2048 units of displays free of charge.
Download the software from Panasonic website (http://panasonic.net/avc/projector/pass/). It is necessary to
register and login to PASS
*1
to download.
*1 PASS: Panasonic Professional Display and Projector Technical Support Website
Refer to Panasonic website (http://panasonic.net/avc/projector/pass/) for details.
Disposal
To dispose of the product, ask your local authorities or dealer for correct methods of disposal.
The lamp contains mercury. When disposing of used lamp units, contact your local authorities or dealer for correct
methods of disposal.
Cautions on use
rTo get a good picture quality
In order to view a beautiful image in higher contrast, prepare an appropriate environment. Draw curtains or blinds
over windows and turn off any lights near the screen to prevent outside light or light from indoor lamps from
shining onto the screen.
rDo not touch the surface of the projection lens with your bare hands.
If the surface of the projection lens becomes dirty from ngerprints or anything else, this will be magnied and
projected onto the screen.
Attach the lens cover supplied with the projector or with the optional projection lens to the projector when you do
not use the projector.
rDLP chip
f The DLP chip is precision-made. Note that in rare cases, pixels of high precision could be missing or always lit.
Note that such phenomena do not indicate malfunction.
f Directing a high-power laser beam onto the projection lens surface can damage the DLP chip.
rDo not move the projector or subject it to vibration or impact while it is operating.
Doing so may shorten the life of the built-in motor.
rLamp
The light source of the projector is a high-pressure mercury lamp.
A high-pressure mercury lamp has the following characteristics.
f The luminance of the lamp will decrease by duration of usage.
f The lamp may burst with a loud sound or have its service life shortened because of shock, chipping, or
degradation due to cumulative runtime.
f The lamp life varies greatly depending on individual differences and usage conditions. In particular, frequent on/
off switching of the power greatly deteriorates the lamp and affects the lamp life.
f Continuous use for over one week will deteriorate the lamp. The degradation of the lamp due to continuous use
can be reduced by using the [PROJECTOR SETUP] menu → [LAMP RELAY].
f In rare cases, the lamp bursts shortly after projection starts.
f The risk of bursting increases when the lamp is used beyond its replacement cycle. Make sure to replace the
lamp unit regularly.
(“When to replace the lamp unit” (x page 166), “How to replace the lamp unit” (x page 167))
f If the lamp bursts, gas contained inside of the lamp is released in the form of smoke.
f It is recommended that you store the Replacement lamp unit as a contingency.
Chapter 1 Preparation — Precautions for use
22 - ENGLISH
rComputer and external device connections
f When connecting a computer or an external device, read this manual carefully regarding the use of power cords
and shielded cables as well.
Accessories
Make sure that the following accessories are provided with your projector. Numbers enclosed in < > show the
number of accessories.
Wireless/wired remote control unit <1>
(N2QAYA000060)
Power cord
(TXFSX03VBDZ)
(TXFSX02VBDZ)
(TXFSX03VARZ)
(TXFSX02UTRZ)
Lens Mount Cover <1>
(Black model: TKPB64401)
(White model: TKPB64402)
(The same color as the outer case will be supplied.)
Lens cover <1>
(TKKL5244-1)
(Only models with lens)
CD-ROM <1>
(TXFQB02WGDZ)
AAA/R03 battery <2>
(For remote control unit)
Attention
f After unpacking the projector, discard the power cord cap and packaging material properly.
f Do not use the supplied power cord for devices other than this projector.
f For missing accessories, consult your dealer.
f Store small parts in an appropriate manner, and keep them away from small children.
Note
f The type and number of the supplied power cords vary depending on the country or region where you purchased the
product.
f The model numbers of accessories are subject to change without prior notice.
Chapter 1 Preparation — Precautions for use
ENGLISH - 23
Contents of the supplied CD-ROM
The contents of the supplied CD-ROM are as follows.
Instruction/list (PDF) Operating Instructions – Functional Manual
Multi Projector Monitoring & Control Software Operating Instructions
Logo Transfer Software Operating Instructions
List of Compatible Projector
Models
This is a list of projectors that are compatible with the software
contained in the CD-ROM and their restrictions.
Software Multi Projector Monitoring &
Control Software (Windows)
This software allows you to monitor and control multiple
projectors connected to the LAN.
Logo Transfer Software
(Windows)
This software allows you to transfer original images, such as
company logos to be displayed when projection starts, to the
projector.
Optional accessories
Optional accessories
(product name)
Model No.
Projection lens
Zoom lens
ET-DLE080, ET-DLE085, ET-DLE150, ET-DLE250, ET-DLE350,
ET-DLE450
Fixed-focus lens ET-DLE030, ET-DLE055
Ceiling Mount Bracket
ET-PKD120H (for high ceilings), ET-PKD120S (for low ceilings), ET-PKD130H (for High
Ceilings, 6-axis Adjustment), ET-PKD130B (Projector Mount Bracket)
Replacement lamp unit ET-LAD70 (1 pc), ET-LAD70W (2 pcs)
Upgrade Kit ET-UK20 (supported only for PT-DZ780)
Auto Screen Adjustment
Upgrade Kit
ET-CUK10 (supported only for PT-DZ780)
Early Warning Software
(Basic license/3-year
license)
ET-SWA100 Series
*1
Digital Interface Box ET-YFB100G
DIGITAL LINK Switcher ET-YFB200G
*1 The sufx of the Model No. differs according to the license type.
Note
f The model numbers of optional accessories are subject to change without prior notice.
Chapter 1 Preparation — About your projector
24 - ENGLISH
About your projector
Remote control
1
3
2
4
5
7
6
8
9
10
15
12
11
13
14
16
17
Front Top
Bottom
1 Power standby <v> button
Sets the projector to the state where the projector is switched
off (standby mode) when the <MAIN POWER> switch on the
projector is set to <ON> and in projection mode.
2 Power on <b> button
Starts projection when the <MAIN POWER> switch on the
projector is set to <ON> when the power is switched off
(standby mode).
3 Remote control indicator
Blinks if any button in the remote control is pressed.
4 Lens (<FOCUS>, <ZOOM>, <SHIFT>) buttons
Adjusts the projection lens. (x page 62)
5 <MENU> button/<ENTER> button/asqw buttons
Used to navigate through the menu screen. (x page 71)
6 <ON SCREEN> button
Switches the on-screen display function on (display) or off
(hide). (x page 66)
7 Input selection (<RGB1/2>, <DIGITAL LINK>, <DVI-D>,
<VIDEO>, <SDI>, <HDMI>) buttons
Switches the input signal to project. (x page 67)
(SDI input is supported only for PT-DZ780.)
8 <FUNCTION> button
Assigns a frequently used operation as a shortcut button.
(x page 68)
9 Number (<0> - <9>) buttons
Used for entering an ID number or a password in a multiple
projector environment.
10 <AUTO SETUP> button
Automatically adjusts the image display position while projecting
the image.
[PROGRESS] is displayed while in automatic adjustment.
(x page 68)
11 <SHUTTER> button
Used to temporarily turn off the image. (x page 66)
12 <TEST PATTERN> button
Displays the test pattern. (x page 68)
13 <STATUS> button
Displays the projector information.
14 <DEFAULT> button
Resets the content of the sub-menu to the factory default.
(x page 72)
15 <ID SET> button
Sets the ID number of the remote control in a multiple projector
environment. (x page 28)
16 Remote control signal transmitter
17 Remote control wired terminal
This is the terminal used to connect to the projector via a cable
when used as a wired remote control. (x page 29)
Attention
f Do not drop the remote control.
f Avoid contact with liquids or moisture.
f Do not attempt to modify or disassemble the remote control.
Note
f When operating the remote control by directly pointing at the remote control signal receiver of the projector body, operate the remote
control within a distance approx. 30 m (98'5") from the remote control signal receiver. The remote control can control at angles of up to ±30°
vertically and horizontally, but the effective control range may be reduced.
f If there are any obstacles between the remote control and the remote control signal receiver, the remote control may not operate properly.
f The signal will be reected off the screen. However, the operating range may be limited from light reection loss due to the screen material.
f If the remote control signal receiver directly receives strong light, such as uorescent light, the remote control may not operate properly. Use
it in a place distant from the light source.
f The power indicator <ON (G)/STANDBY (R)> will blink if the projector receives a remote control signal.
Chapter 1 Preparation — About your projector
ENGLISH - 25
f The operation of the <VIDEO> button is disabled in the factory default settings. The operation is enabled when [REMOTE CONTROL] is set
to [USER] and [VIDEO BUTTON] of [INPUT SELECT BUTTON] is set to other than [DISABLE], from the [SECURITY] menu → [CONTROL
DEVICE SETUP] (x page 135).
Projector body
1 2 3 4 5 6
7 7
10
12
8
17 18
1413 15
16
11
9
14 14
Front
Side
Rear
14 14 14
14 1414
19
Projection direction
Bottom
Warning
Keep your hands and other objects away from the air
exhaust port.
f Keep your hands and face away.
f Do not insert your ngers.
f Keep heat-sensitive objects away.
Heated air from the air exhaust port can cause burns, injury, or
deformations.
1 Remote control signal receiver (front)
2 Power indicator <ON (G)/STANDBY (R)>
Displays the status of the power.
3 Lamp indicator <LAMP1>
Displays the status of lamp 1.
4 Lamp indicator <LAMP2>
Displays the status of lamp 2.
5 Temperature indicator <TEMP>
Displays the internal temperature status.
6 Filter indicator <FILTER>
Displays the status of the air lter case and air lter.
7 Adjustable feet
Adjusts the projection angle.
8 Projection lens
(Only models with lens)
9 Air exhaust port
10 Remote control signal receiver (rear)
11 Air lter case
12 Lamp unit cover
13 Control panel (x page 26)
14 Air intake port
In addition to the bottom of the projector body, there are air
intake ports around the connecting terminals too.
15 Security slot
This security slot is compatible with the Kensington security
cables.
16 Connecting terminals (x page 27)
17 <MAIN POWER> switch
Turns on/off the main power.
18 <AC IN> terminal
Connect the supplied power cord.
19 Burglar hook port
Attaches a burglar prevention cable, etc.
Chapter 1 Preparation — About your projector
26 - ENGLISH
Attention
f Do not block the ventilation ports (intake and exhaust) of the projector.
r Control panel
9
10
11
12
13
14
2
4
3
1
5
6
7
8
1 Power on <b> button
Starts projection when the <MAIN POWER> switch on the
projector is set to <ON> when the power is switched off
(standby mode).
2 Power standby <v> button
Sets the projector to the state where the projector is switched
off (standby mode) when the <MAIN POWER> switch on the
projector is set to <ON> and in projection mode.
3 <RGB1> button
Switches the input to RGB1.
4 <RGB2> button
Switches the input to RGB2.
5 <DVI-D> button
Switches the input to DVI-D.
6 <HDMI> button
Switches the input to HDMI.
7 <DIGITAL LINK> button
Switches the input to DIGITAL LINK.
8 <SDI> button
Switches the input to SDI.
(Only for PT-DZ780)
9 <MENU> button
Displays or hides the main menu. (x page 71)
Returns to the previous menu when a sub-menu is displayed.
If you press the <MENU> button on the control panel for at least
three seconds while the on-screen display is off (hidden), the
on-screen display is turned on.
10 <LENS> button
Adjusts the focus, zoom, and shift (position) of the lens.
11 <ENTER> button
Determines and executes an item in the menu screen.
12 <SHUTTER> button
Used to temporarily turn off the image. (x page 66)
13 asqw buttons
Used to select items in the menu screen, change settings, and
adjust levels.
Also used to enter a password in [SECURITY] or enter
characters.
14 <AUTO SETUP> button
Automatically adjusts the image display position while projecting
the image. [PROGRESS] is displayed while in automatic
adjustment. (x page 68)
Chapter 1 Preparation — About your projector
ENGLISH - 27
r Connecting terminals
1 2
53 4
6 7 8 9 11
10
1 <REMOTE 1 IN> terminal/<REMOTE 1 OUT> terminal
These are the terminals to connect the remote control for serial
control in a multiple projector environment.
2 <REMOTE 2 IN> terminal
This is a terminal to remotely control the projector using the
external control circuit.
3 <SERIAL IN> terminal
This is the RS-232C compatible terminal to externally control
the projector by connecting a computer.
4 <SERIAL OUT> terminal
This is a terminal to output the signal connected to the <SERIAL
IN> terminal.
5 <DC OUT 5V> terminal
This is a USB terminal only for power supply. (DC 5 V,
maximum 900 mA)
This can be used when power is to be supplied to a wireless
display adapter, etc.
6 <SDI IN> terminal
This is the terminal to input SDI signals.
(Only for PT-DZ780)
7 <RGB 1 IN> (<R/P
R
/VIDEO>, <G/Y>, <B/P
B
/C>, <SYNC/HD>,
<VD>) terminals
These are terminals to input RGB signals, YC
B
C
R
/YP
B
P
R
signals, Y/C signals, or video signals.
8 <RGB 2 IN> terminal
This is a terminal to input RGB signals or YC
B
C
R
/YP
B
P
R
signals.
9 <DVI-D IN> terminal
This is the terminal to input DVI-D signals.
10 <HDMI IN> terminal
This is the terminal to input HDMI signals.
11 <DIGITAL LINK/LAN> terminal
This is the LAN terminal to connect to the network. This is also
used when connecting a video signal transmission device via
the LAN terminal.
Attention
f When a LAN cable is directly connected to the projector, the network connection must be made indoors.
Chapter 1 Preparation — Preparing the remote control
28 - ENGLISH
Preparing the remote control
Inserting and removing the batteries
ii)
i)
Fig. 1 Fig. 2
1) Open the cover. (Fig. 1)
2) Insert the batteries and close the cover (insert the m side first). (Fig. 2)
f When removing the batteries, perform the steps in reverse order.
When using the multiple projectors
When you use the multiple projectors together, you can control all the projectors simultaneously or each projector
individually using single remote control, if a unique ID number is assigned to each projector.
When using the projectors by setting the ID numbers, set the ID number of the projector body after initial settings
have been completed. Then, set the ID number of the remote control. For initial settings, refer to “When the initial
setting screen is displayed” (x page 57).
The factory default ID number of the projector (projector body and remote control) is set to [ALL], so you can use
it as it is. Set the ID numbers of the projector body and remote control as necessary.
For details on setting the ID number of the remote control, refer to “Setting the remote control ID numbers”
(x page 69).
Note
f Set the ID number of the projector body from the [PROJECTOR SETUP] menu → [PROJECTOR ID].
Chapter 1 Preparation — Preparing the remote control
ENGLISH - 29
Connecting the remote control to the projector with a cable
When you use the system with multiple projectors, use commercially available M3 stereo mini jack cables and
connect the other devices to the <REMOTE 1 IN>/<REMOTE 1 OUT> terminals of the projector.
The remote control is effective even in places where an obstacle stands in the light path or where devices are
susceptible to outside light.
Connecting terminals
Connecting to a second projector
M3 stereo mini jack cable (commercially available)
Remote control
Connecting to the remote
control wired terminal
Attention
f Use a cable that is 15 m (49'3") or shorter, with 2 core shielded. The remote control may not operate when the length of the cable exceeds
15 m (49'3") or when the shielding of the cable is inadequate.
30 - ENGLISH
Chapter 2 Getting Started
This chapter describes things you need to do before using the projector such as the setup and connections.
Loading...