1⁄8 DIN 6-Digit Rate Meter/Totalizers
DPF701 Series
UMeasures Rate from
0.5Hz to 30 kHz
UTotalizes Up or Down from99,999 to 999,999 or Acts Accumulating Stopwatch
U6-Digit, 7-Segment LED,
14.2mm H (0.56")
Signal Input Choices (Selectable by DIP Switch)
UTTL Compatible with Protection to 25V
ULow Level (25 mV rms)
UHigh Level Signals Protected to 115V
UNAMUR
UOpen Collector PNP or NPN
Communications and Control
URS232 Output Optional
UOptional Dual 5A Form C Relays
UAnalog Output, Scalable, 4 to 20 mA, 0 to 20 mA, 0 to 10V (Optional)
DPF701 1⁄8 DIN, FP7001A flow sensor, and FP7010-GI fitting, shown smaller than
actual size, please visit omega.com for details.
DP40-BB-YL yellow BUMPER BAND® protective guard, sold separately. A gray BUMPER BAND guard is supplied with every unit.
BEZEL DESIGN IS A
REGISTERED TRADEMARK
The DPF701 ratemeter/totalizer offers user programming via the 5 front-panel keys. Scale factor can be programmed from -99,999 to 999,999
(any decimal point, multiply or divide), while offset can be programmed from -99,999 to 999,999 (any decimal point).
Programs are stored in non-volatile memory, with three levels of program lockout for security. Optional features include Hi or Lo setpoints for control or alarm, plus RS232 communication. Fixed decimal point or autoranging is standard.
Specifications
Functions: Rate and totalize selected by menu Display: 6-digit, 7-segment red LED display Inputs
Type: Single input. TTL, CMOS, NPN open collector, contact closure and magnetic pickup compatible; selected by DIP switch. Non-isolated.
Level: Max 60V; min 25 mV rms
Frequency: 30 kHz max
Excitation: Regulated, 5.0, 8.2, or 12.4V selected by DIP switch, 100 mA max
Accuracy: ±0.5 LSD of total; 0.01% of the rate ±1.5 LSD Setpoints: Two, optional
Alarm Outputs: Optional
Communication: RS232, analog output, optional
Rate Measurement Technique: 1/x Gate Time: 0.30 sec
Decimal Point: Programmable or autoranging Trigger Slope: Selectable by DIP switch
Leading Zeros: Blank
Power: 115 or 230 ±15% Vac
Dimensions: 48 H x 96 W x 152 mm D (1.9 x 3.8 x 6") Panel Cutout: 45 H x 92 mm D (1.8 x 3.6")
Weight: 454 g (1 lb)
To Order Visit omega.com/dpf700 for Pricing and Details |
|
Model No. |
Description |
DPF701 |
115 Vac/7.5 to 13 Vdc powered |
DPF702 |
230 Vac/7.5 to 13 Vdc powered |
Option Boards (Field Installable) |
|
DPF700-A3 |
Analog output board |
DPF700-R |
Dual 5A relay board |
DPF700-232 |
RS232 output board |
Accessories |
|
Model No. |
Description |
DP40-BB-(*) |
¹⁄ DIN bumper band |
DPP-51⁄8 |
DIN panel punch |
* Specify color code: GY (gray), YL (yellow), BK (black), BL (blue), GR (green), RD (red), OR (orange), VL (purple) or WH (white).
Comes complete with gray BUMPER BAND® protective rubber guard and operator’s manual.
Ordering Examples: DPF701, plus DPF700-A3, analog output board.
DPF702, plus DP40-BB-YL, yellow BUMPER BAND. DP40-BB-YL is a yellow protective guard for 1⁄8 DIN meters.
M-5