benchtop muffle furnace
LMF Series
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cabinet |
Constructed |
||||
|
|
|
with |
|||
|
Gage Steel |
|||||
|
. |
|||||
|
of 16- |
|
|
|
||
|
Baked |
Epoxy |
Finish |
|||
|
|
|
|
|||
|
|
|
|
|
|
U550 in3
Muffle Chamber
U1100°C (2012°F) Maximum Temperature
UAutomatic and Programmable Models
UModern Fiber/Firebrick Muffle Design
U120 or 240V
LMF Series benchtop muffle furnaces feature a 550 in3 chamber with fiber insulation and firebrick heating plates. The furnace cabinet is constructed of 16 gage steel with a baked epoxy finish. A top exhaust port allows gases to be vented, or it can be plugged during operation. Two temperature controller models are available: automatic and multistage programmable.
LMF Series furnaces are ideal for heat-treating applications,
material research, and sample ashing determinations in the geological, metallurgical, and wastewater treatment industries. These furnaces are also used in chemistry, physics, and engineering laboratories.
The LMF-A550 has an analog pyrometer that displays temperature, scaled in 50° increments. Temperature is adjusted via a large control dial, scaled in 100° increments. The controller repeatability is excellent.
The LMF-3550 has a 3-stage programmable temperature controller that stores up to 10 programs in memory. Any
LMF A550/120 shown smaller than actual size.
2 programs can be linked to create a single 6-stage program. One program is dedicated to a single setpoint that holds the setpoint indefinitely. The delay cycle allows the furnace to be set to its heating cycle at a specific time on a future date. The PID controller allows heat increase or decrease rates to be programmed into the cycle.
154 |
To Order, Call |
or Shop Online at omega.comSM |