Benchtop Digital Thermometer
Singleand Ten-Channel Models
Shown smaller than actual size.
MDSS41-TC-GN, shown with TTSS-18U-6 transition junction and quick-disconnect thermocouples, sold separately. Visit omega.com/ktss_jtss_chb
MDS41-TC, shown with GKMQSS-125U-6 miniature quick-disconnect probes, sold separately. Visit omega.com/gjmqss
MDS41 Series
UFront Panel Programmable for 9 Thermocouple Calibrations
U0.2° Accuracy for Temperature
U0.01° Resolution
UMin/Max Storage
UOptional Analog Output
UOptional RS232 Communications
U115 Vac Power
The MDS41 is a high-precision digital benchtop meter, with 2 models that accept either thermocouple or RTD inputs. The large, easy-to-read 13 mm (0.5") display features 6 digits with 0.01° resolution. The thermocouple input model has 9 thermocouple
types in memory, any one of which can be selected through the front panel. The RTD input model can be programmed for a linear resistance or one of two 100 Ω platinum curves, 0.00385 or 0.00392 (2- or
3- wire RTD). The unit is switchable to °C/°F/K.
The single-channel unit includes a universal rear connector which accepts either the miniature or standard quick disconnect connector. The 10-channel MDSS uses screw terminals for temperature input.
Optional scalable analog output is available and can be ordered as a 0 to 10 Vdc or 4 to 20 mA. The analog output provides a retransmission of the measured temperature for recorders or dataloggers.
Visit omega.com/dp41 for more information on the DP41 series.
Rear panel showing sub-D connector for optional RS232 output.
To Order Visit omega.com/mds_mdss for Pricing and Details
|
Input |
No. of |
Model No. |
Type |
Channels |
MDS41-TC |
Thermocouple |
1 |
|
|
|
MDSS41-TC |
Thermocouple |
10 |
|
|
|
MDS41-RTD |
RTD |
1 |
|
|
|
MDSS41-RTD |
RTD |
10 |
Red LED display and 115 Vac power are standard.
For green LED display, add suffix “-GN” to model number,
no additional cost. For analog output, add suffix “-A” to model number, no additional cost.
Note: The analog output for the MDSS models is for the displayed channel only. To order units with optional RS232 communications, add suffix “-S2” to model number, no additional cost.
Ordering Examples: MDS41-TC, single-channel benchtop indicator, thermocouple input.
MDS41-RTD-A, single-channel benchtop indicator, RTD input and analog output.
M-105