November 2001
LP3984
Micropower, 150mA Ultra Low-Dropout CMOS Voltage Regulator in Subminiature 4-I/O micro SMD Package
General Description
The LP3984 is designed for portable and wireless applications with demanding performance and space requirements.
The LP3984's performance is optimized for battery powered systems to deliver extremely low dropout voltage and low quiescent current. Regulator ground current increases only slightly in dropout, further prolonging the battery life.
Power supply rejection is better than 60 dB at low frequencies and starts to roll off at 10 kHz. High power supply rejection is maintained down to lower input voltage levels common to battery operated circuits.
The device is ideal for mobile phone and similar battery powered wireless applications. It provides up to 150 mA, from a 2.5V to 6V input, consuming less than 1.2µA in disable mode and has fast turn-on time less than 20µs.
The LP3984 is available in micro SMD and 5 pin SOT-23 package. Performance is specified for −40ÊC to +125ÊC temperature range and is available in 1.5V, 1.8V, 2.0V, and 3.1V output voltages. For other output voltage options from 1.5V to 3.5V, please contact National Semiconductor sales office.
n60dB PSRR at 1kHz, 40dB at 10kHz @ 3.1VIN
n≤1.2µA quiescent current when shut down
nFast Turn-On time: 20 µs (typ.)
n75mV typ dropout with 150mA load
n−40 to +125ÊC junction temperature range for operation
n1.5V, 1.8V, 2.0V, and 3.1V
Features
nMiniature 4-I/O micro SMD and SOT-23-5 package
nLogic controlled enable
nStable with tantalum capacitors
n1 µF Tantalum output capacitor
nFast turn-on
nThermal shutdown and short-circuit current limit
Applications
nCDMA cellular handsets
nWideband CDMA cellular handsets
nGSM cellular handsets
nPortable information appliances
Key Specifications
n2.5 to 6.0V input range
n150mA guaranteed output
Typical Application Circuit
20020402
Note: Pin Numbers in parenthesis indicate micro SMD package.
I/O-4 Subminiature in Regulator Voltage CMOS Dropout-Low Ultra 150mA Micropower, LP3984 Package SMD micro
© 2001 National Semiconductor Corporation |
DS200204 |
www.national.com |
LP3984
Block Diagram
|
|
|
|
|
20020401 |
Pin Descriptions |
|
|
|
||
|
|
|
|
|
|
|
Name |
|
µSMD |
SOT |
Function |
|
|
|
|
|
|
|
VEN |
|
4 |
3 |
Enable Input Logic, Enable High |
|
GND |
|
1 |
2 |
Common Ground |
|
|
|
|
|
|
|
VOUT |
|
2 |
5 |
Output Voltage of the LDO |
|
VIN |
|
3 |
1 |
Input Voltage of the LDO |
|
N.C. |
|
|
4 |
No Connection |
|
|
|
|
|
|
Connection Diagrams |
|
|
micro SMD, 4 Bump Package |
||
|
SOT-23-5 Package |
|
|
|
20020407
Top View
See NS Package Number MF05A
20020470
Top View
See NS Package Number BPA04
Note: The actual physical placement of the package marking will vary from part to part. The package marking will designate the date code. Package marking does not correlate to device type in any way.
www.national.com |
2 |
Ordering Information
For micro SMD Package
Output |
Grade |
LP3984 Supplied as 250 |
LP3984 Supplied as 3000 |
|
Voltage (V) |
Units, Tape and Reel |
Units, Tape and Reel |
||
|
||||
|
|
|
|
|
1.5 |
STD |
LP3984IBP-1.5 |
LP3984IBPX-1.5 |
|
|
|
|
|
|
1.8 |
STD |
LP3984IBP-1.8 |
LP3984IBPX-1.8 |
|
|
|
|
|
|
2.0 |
STD |
LP3984IBP-2.0 |
LP3984IBPX-2.0 |
|
|
|
|
|
|
3.1 |
STD |
LP3984IBP-3.1 |
LP3984IBPX-3.1 |
|
|
|
|
|
For SOT Package
Output |
Grade |
LP3984 Supplied as 1000 |
LP3984 Supplied as 3000 |
Package Marking |
|
Voltage (V) |
Units, Tape and Reel |
Units, Tape and Reel |
|||
|
|
||||
|
|
|
|
|
|
1.5 |
STD |
LP3984IMF-1.5 |
LP3984IMFX-1.5 |
LEAB |
|
|
|
|
|
|
|
1.8 |
STD |
LP3984IMF-1.8 |
LP3984IMFX-1.8 |
LEBB |
|
|
|
|
|
|
|
2.0 |
STD |
LP3984IMF-2.0 |
LP3984IMFX-2.0 |
LECB |
|
|
|
|
|
|
|
3.1 |
STD |
LP3984IMF-3.1 |
LP3984IMFX-3.1 |
LEDB |
|
|
|
|
|
|
LP3984
3 |
www.national.com |
LP3984
Absolute Maximum Ratings (Notes 1,
2)
If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/ Distributors for availability and specifications.
VIN,VOUT, VEN |
−0.3 to 6.5V |
Junction Temperature |
150ÊC |
Storage Temperature |
−65ÊC to +150ÊC |
Lead Temp. (Note 3) |
235ÊC |
Pad Temp. (Note 3) |
235ÊC |
Power Dissipation (Note 4) |
|
qJA (SOT23-5) |
220ÊC/W |
qJA (micro SMD) |
340ÊC/W |
Maximum Power Dissipation |
|
SOT23-5 |
364mW |
Micro SMD |
235mW |
ESD Rating(Note 5) |
|
Human Body Model |
2kV |
Machine Model |
200V |
Operating Ratings (Notes 1, 2)
VIN |
2.5 to 6V |
VEN |
0 to (VIN + 0.3V) |
Junction Temperature |
−40ÊC to +125ÊC |
Maximum Power Dissipation (Note 6) |
|
SOT23-5 |
250mW |
micro SMD |
160mW |
Electrical Characteristics
Unless otherwise specified: VIN = 2.5V for 1.5, 1.8, & 2.0V options, VIN = VOUT + 0.5 for output options higher than 2.5V, CIN = 1 µF, IOUT = 1mA, COUT = 1 µF, tantalum. Typical values and limits appearing in standard typeface are for TJ = 25ÊC. Limits appearing in boldface type apply over the entire junction temperature range for operation, −40ÊC to +125ÊC. (Note 7) (Note 8)
Symbol |
Parameter |
Conditions |
Typ |
|
Limit |
Units |
|
|
|
|
|||||
Min |
|
Max |
|||||
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
Output Voltage |
|
|
−1.2 |
|
1.2 |
% of |
|
Tolerance |
|
|
−2.0 |
|
2.0 |
VOUT(nom) |
|
Line Regulation Error |
VIN = 2.5V to 4.5V for 1.5, 1.8, 2.0V |
0.05 |
−0.15 |
|
0.15 |
|
|
|
options |
|
|
|
|
%/V |
DVOUT |
|
VIN = (VOUT + 0.5V) to 4.5V for |
|
|
|
|
|
|
|
|
|
|
|
||
|
|
Voltage options higher than 2.5V |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Load Regulation Error |
IOUT = 1 mA to 150 mA |
0.002 |
|
|
0.005 |
|
|
(Note 9) |
LP3984IM5 (SOT23-5) |
|
|
|
|
%/mA |
|
|
LP3984IBP (micro SMD) |
0.0009 |
|
|
0.002 |
|
|
|
|
|
|
|
|
|
|
|
VIN = VOUT(nom) + 0.2V, |
60 |
|
|
|
|
|
|
f = 1 kHz, |
|
|
|
|
|
PSRR |
Power Supply Rejection Ratio |
IOUT = 50 mA (Figure 2) |
|
|
|
|
dB |
VIN = VOUT(nom) + 0.2V, |
40 |
|
|
|
|||
|
|
|
|
|
|
||
|
|
f = 10 kHz, |
|
|
|
|
|
|
|
IOUT = 50 mA (Figure 2) |
|
|
|
|
|
IQ |
Quiescent Current |
VEN = 1.4V, IOUT = 0 mA |
80 |
|
|
125 |
|
|
|
VEN = 1.4V, IOUT = 0 to 150 mA |
110 |
|
|
150 |
µA |
|
|
VEN = 0.4V |
0.005 |
|
|
1.2 |
|
|
Dropout Voltage (Note 10) |
IOUT = 1 mA |
0.6 |
|
|
2.5 |
|
|
|
IOUT = 50 mA |
25 |
|
|
40 |
mV |
|
|
IOUT = 100 mA |
50 |
|
|
80 |
|
|
|
|
|
|
|||
|
|
IOUT = 150 mA |
75 |
|
|
120 |
|
ISC |
Short Circuit Current Limit |
Output Grounded |
600 |
|
|
|
mA |
|
|
(Steady State) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
IOUT(PK) |
Peak Output Current |
VOUT ³ VOUT(nom) - 5% |
600 |
300 |
|
|
mA |
TON |
Turn-On Time |
|
20 |
|
|
|
µs |
|
(Note 11) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
en |
Output Noise Voltage |
BW = 10 Hz to 100 kHz, |
90 |
|
|
|
µVrms |
|
|
COUT = 1µF tant. |
|
|
|
|
|
IEN |
Maximum Input Current at EN |
VEN = 0.4 and VIN = 6.0 |
±1 |
|
|
|
nA |
www.national.com |
4 |