
TABLE OF CONTENTS
SECTION 1 - FRAME ........................................................................................................................................................................... 9
FIGURE 1-1. AXLE INSTALLATION .............................................................................................................................................. 10
FIGURE 1-2. STEERING INSTALLATION WITHOUT TOW PACKAGE ........................................................................................ 12
FIGURE 1-3. STEERING INSTALLATION WITH TOW PACKAGE................................................................................................ 16
FIGURE 1-4. TIRE AND WHEEL DRIVE INSTALLATIONS ........................................................................................................... 20
FIGURE 1-5. DRIVE HUB ASSEMBLY .......................................................................................................................................... 24
FIGURE 1-6. DRIVE MOTOR ASSEMBLY .................................................................................................................................... 28
FIGURE 1-7. DRIVE VALVES AND SHIELDS INSTALLATION (FRAME MOUNTED) .................................................................. 30
FIGURE 1-8. TOW PACKAGE INSTALLATION (OPTIONAL) ....................................................................................................... 34
SECTION 2 - TURNTABLE ................................................................................................................................................................ 37
FIGURE 2-1. CONTROL VALVES INSTALLATIONS ..................................................................................................................... 38
FIGURE 2-2. CONTROL VALVES INSTALLATIONS ..................................................................................................................... 42
FIGURE 2-3. MAIN CONTROL VALVE ASSEMBLY ...................................................................................................................... 44
FIGURE 2-4. MAIN CONTROL VALVE ASSEMBLY ...................................................................................................................... 48
FIGURE 2-5. ACCESSORY VALVE ASSEMBLY ........................................................................................................................... 52
FIGURE 2-6. SWING DRIVE, TURNTABLE BEARING AND LOCK INSTALLATIONS .................................................................. 54
FIGURE 2-7. SWING MOTOR/HUB ASSEMBLY ........................................................................................................................... 56
FIGURE 2-8. DEUTZ D2011 ENGINE INSTALLATION ................................................................................................................. 60
FIGURE 2-9. DEUTZ TD2.9L4 ENGINE INSTALLATION .............................................................................................................. 70
FIGURE 2-10. GM ENGINE INSTALLATION ................................................................................................................................. 82
FIGURE 2-11. PISTON PUMP ASSEMBLY ................................................................................................................................... 88
FIGURE 2-12. GEAR PUMP ASSEMBLY ...................................................................................................................................... 94
FIGURE 2-13. TANK INSTALLATIONS .......................................................................................................................................... 96
FIGURE 2-14. ROTARY COUPLING INSTALLATION ................................................................................................................. 100
FIGURE 2-15. GROUND CONTROL BOX ASSEMBLY (FIBERGLASS BOX) ............................................................................ 104
FIGURE 2-16. GROUND CONTROL BOX ASSEMBLY (STEEL BOX) ........................................................................................ 108
FIGURE 2-17. ELECTRICAL OPTIONS INSTALLATION (TURNTABLE MOUNTED) ................................................................. 112
FIGURE 2-18. ENGINE TRAY JACK INSTALLATION (OPTIONAL) ............................................................................................ 116
FIGURE 2-19. HOODS (ABS) AND LIFTING PLATE INSTALLATIONS ...................................................................................... 118
FIGURE 2-20. HOODS (STEEL) AND LIFTING PLATE INSTALLATIONS (DEUTZ D2011 AND GM ENGINES) ....................... 124
FIGURE 2-21. HOODS (STEEL) AND LIFTING PLATE INSTALLATIONS (DEUTZ TD2.9L4 ENGINES) ................................... 130
FIGURE 2-22. 7500W SKYPOWER GENERATOR INSTALLATION - DEUTZ ENGINE (OPTIONAL) ........................................ 136
FIGURE 2-23. 7500W SKYPOWER GENERATOR INSTALLATION - GM ENGINE (OPTIONAL) .............................................. 142
SECTION 3 - BOOM ........................................................................................................................................................................ 147
FIGURE 3-1. BOOM INSTALLATION - 600S ............................................................................................................................... 148
FIGURE 3-2. BOOM INSTALLATION - 660SJ ............................................................................................................................. 152
FIGURE 3-3. MAIN BOOM ASSEMBLIES ................................................................................................................................... 158
FIGURE 3-4. ROTATOR ASSEMBLIES ....................................................................................................................................... 162
FIGURE 3-5. CONTROL VALVE INSTALLATION (BOOM) ......................................................................................................... 164
FIGURE 3-6. POWER TRACK INSTALLATIONS......................................................................................................................... 168
SECTION 4 - PLATFORM ................................................................................................................................................................ 171
FIGURE 4-1. PLATFORM COMPONENTS INSTALLATION ....................................................................................................... 172
FIGURE 4-2. PLATFORM COMPONENTS INSTALLATION (FALL ARREST PLATFORM) ........................................................ 176
FIGURE 4-3. PLATFORM CONSOLE ASSEMBLY ...................................................................................................................... 178
FIGURE 4-4. CONTROLLER ASSEMBLY (LIFT AND SWING) ................................................................................................... 182
FIGURE 4-5. CONTROLLER ASSEMBLY (DRIVE AND STEER)................................................................................................ 184
FIGURE 4-6. SOFT TOUCH SYSTEM INSTALLATION (OPTIONAL) ......................................................................................... 186
SECTION 5 - CYLINDER ................................................................................................................................................................. 189
FIGURE 5-1. AXLE LOCKOUT CYLINDER ASSEMBLY ............................................................................................................. 190
FIGURE 5-2. PLATFORM LEVEL SLAVE CYLINDER ASSEMBLY ............................................................................................. 192
FIGURE 5-3. MAIN LIFT CYLINDER ASSEMBLY ....................................................................................................................... 196
FIGURE 5-4. JIB LIFT CYLINDER ASSEMBLY - 660SJ .............................................................................................................. 198
FIGURE 5-5. MASTER CYLINDER ASSEMBLY .......................................................................................................................... 200
FIGURE 5-6. STEER CYLINDER ASSEMBLY ............................................................................................................................. 202
FIGURE 5-7. TELESCOPE CYLINDER ASSEMBLY ................................................................................................................... 204
SECTION 6 - HYDRAULIC .............................................................................................................................................................. 207
3121299 600S/660SJ 7

TABLE OF CONTENTS
FIGURE 6-1. HYDRAULIC DIAGRAM - AXLE LOCKOUT ............................................................................................................ 208
FIGURE 6-2. HYDRAULIC DIAGRAM - DRIVE AND STEER (2WD/2WS) ................................................................................... 210
FIGURE 6-3. HYDRAULIC DIAGRAM - DRIVE AND STEER (4WD/2WS) ................................................................................... 212
FIGURE 6-4. HYDRAULIC DIAGRAM - STANDARD ................................................................................................................... 214
FIGURE 6-5. HYDRAULIC DIAGRAM - STANDARD ................................................................................................................... 218
FIGURE 6-6. HYDRAULIC DIAGRAM LIST .................................................................................................................................. 222
SECTION 7 - ELECTRICAL .............................................................................................................................................................. 223
FIGURE 7-1. ELECTRICAL DIAGRAM LIST ................................................................................................................................ 224
FIGURE 7-2. HARNESS COMPONENTS INSTALLATION .......................................................................................................... 226
FIGURE 7-3. HARNESS COMPONENTS INSTALLATION .......................................................................................................... 244
SECTION 8 - DECALS ..................................................................................................................................................................... 263
FIGURE 8-1. DECAL INSTALLATION (ANSI SPEC) .................................................................................................................... 264
FIGURE 8-2. DECAL INSTALLATION (COUNTRY SPEC) .......................................................................................................... 268
FIGURE 8-3. DECAL INSTALLATION (AUSTRALIAN AND CE SPEC) ....................................................................................... 274
SECTION 9 - RECOMMENDED SERVICE PARTS STOCK ............................................................................................................ 277
FIGURE 9-1. MODEL 600SJ/660SJ STANDARD PARTS ............................................................................................................ 278
FIGURE 9-2. MODEL 600SJ/660SJ VARIABLE PARTS .............................................................................................................. 280
SECTION 10 - SPECIAL OPTIONS ................................................................................................................................................. 281
FIGURE 10-1. SPECIAL OPTIONS .............................................................................................................................................. 282
PART NUMBER INDEX .................................................................................................................................................................... 289
8 600S/660SJ 3121299

SECTION 1 - FRAME
WHEEL DRIVE INSTALLATIONS
Note: 2WD Qty Shown. For 4WD, Double Qty Shown.
Bolt 1/2in-13NC x 1-1/4in (Grade 8)
Bolt 5/8in-11NC x 2in (Grade 8)
Drive Hub Assembly (See DRIVE HUB ASSEMBLY for
Breakdown)
Drive Motor Assembly (See DRIVE MOTOR ASSEMBLY for
Breakdown)
Flatwasher 1/2in Hardened
Flatwasher 5/8in Hardened
Lubricant - 80W-90 (Not Shown)
TIRE AND WHEEL INSTALLATIONS OPTIONS
Pneumatic - OTR Tires (Available on All Specs except
Australian and CE Specs)
Pneumatic W/Sealant - OTR Tires (Available on ANSI and
ANSI Export Specs Only)
Pneumatic Turf/Sand - Galaxy Tires (Available on ANSI
Specs Only)
Foam-Filled - OTR Tires (Available on All Specs)
Foam-Filled - OTR Tires (Non-Marking) (Available on All
Specs)
Pneumatic - OTR Tires (Available on ANSI Export and
Japanese Specs)
Foam-Filled - OTR Tires (Available on All Specs)
Tire and Wheel Assembly Options:
Pneumatic - OTR Tire (Right Side)
Pneumatic - OTR Tire (Left Side)
Pneumatic W/Sealant - OTR Tire (Right Side)
Pneumatic W/Sealant - OTR Tire (Left Side)
Pneumatic Turf/Sand - Galaxy Tire (Not Shown)
Foam-Filled - OTR Tire (Right Side)
Foam-Filled - OTR Tire (Left Side)
Foam-Filled - OTR Tire (Non-Marking) (Right Side)
Foam-Filled - OTR Tire (Non-Marking) (Left Side)
Note: Assemblies may require ballast/foam filling to
manufacturer's specifications prior to installing on a
machine. Refer to Operation and Safety or Service and
Maintenance Manuals. Purchase individual tire and/or rim
only if able to foam fill tire and wheel assembly,
otherwise, purchase complete assembly.
Note: Turf/Sand Tires required additional chassis
counterweight. See SPECIAL OPTIONS SECTION before
installing this option.
FIGURE 1-4. TIRE AND WHEEL DRIVE INSTALLATIONS
3121299 600S/660SJ 21

Tire (1 Per Assembly) Options:
Tire 41/18LL x 22.5 - Turf/Sand (1 Per Assembly)
Rim, Wheel (1 Per Assembly) Options:
Rim, Wheel - 39 x 15-22.5 Tire (1 Per Assembly)
Rim, Wheel - Turf/Sand 22.5 x 14 (1 Per Assembly)
Valve, Air (1 Per Assembly) (All Assemblies except p/n
4520339 & 4520340)
Valve, Air (1 Per Assembly) (4520339 & 4520340
Assemblies) (USA Built Machines) (SN 0300171769
through 0300195754)
Valve, Air (1 Per Assembly) (4520339 & 4520340
Assemblies) (USA Built Machines) (SN 0300195755 to
Present)
Decal - 70 PSI (Turf/Sand Tires 41/18LL x 22.5 Only)
Decal - Tire Sealant (W/Sealant Only)
Chemical, Tire Sealant (Green) (W/Sealant Only)
Cap, Valve Stem (Green) (W/Sealant Only)
SECTION 1 - FRAME
22 600S/660SJ 3121299

FIGURE 1-5. DRIVE HUB ASSEMBLY
Spindle/Housing Assembly (Note: Not Available - Purchase p/n
2780269 Complete Replacement. See 1A-1M for Available
Components.)
Bearing (Includes Cup and Cone)
Housing (Note: Not Available for Purchase.)
Setscrew 1/4in-28NF x 1/2in (Note: Use Item 100A,100B,101A or
101B) 1H
Carrier Assembly (Note: Not Available for Purchase. See 3A-3F for
Available Components.)
Planet Gear Sub-Assembly (Note: Not Available for Purchase. See
4A-4H for Available Components.)
Cover Assembly (Note: Not Available for Purchase. See 6A-6G for
Available Components.)
Brake, Input (Note: Not Available for Purchase. See 8A-8L for
Available Components.)
Ring, Retaining (Note: Use Item 101A or 101B)
O-Ring (Note: Use Item 100B or 101A)
Ring, Back-up (Note: Use Item 100B or 101A)
SECTION 1 - FRAME
3121299 600S/660SJ 25

O-Ring (Note: Use Item 100B or 101A)
Ring, Back-up (Note: Use Item 100B or 101A)
Plug (Note: Not Available - Purchase Locally.)
Plate, ID (Not Shown) (Note: Not Available for Purchase.)
Screw, Countersunk 3/8in-16NC
Plug (Note: Not Available - Purchase Locally.)
Hub Seal Kit (Includes Items 1B, 1F, 1G, 17, 18 & 19)
Brake Seal Kit (Includes Items 1G, 8C, 8D, 8E, 8F & 8H)
Brake Lining Kit (Includes Items 1G, 8C, 8D, 8F, 8E, 8H, 8J &
8K) 101B
Brake Spring Kit (Includes Items 1G, 8C & 8L)
SECTION 1 - FRAME
26 600S/660SJ 3121299

SECTION 1 - FRAME
DRIVE VALVES INSTALLATION OPTIONS:
Bolt 5/16in-18NC Options:
Flow Divider Valve Assembly Options:
2WD (See Items 101-107 for Breakdown)
4WD (See Items 201-207 for Breakdown)
Bolt 3/8in-16NC x 2-1/4in
FLOW DIVIDER ASSEMBLIES (2WD)
Valve, Cartridge (Flow Divider)
Seal Kit - Flow Divider Cartridge
Seal Kit - Check Cartridge
Seal Kit - Check Cartridge
Seal Kit - Check Cartridge
FLOW DIVIDER ASSEMBLIES (4WD)
Valve, Cartridge (Flow Divider)
Seal Kit - Flow Divider Cartridge
Seal Kit - Check Cartridge
Seal Kit - Check Cartridge
Seal Kit - Check Cartridge
Valve, Cartridge (Flow Divider)
Seal Kit - Flow Divider Cartridge
FRAME SHIELDS INSTALLATION
Bolt 3/8in - 16NC x 7/8in
Flatwasher, 3/8in Hardened
FIGURE 1-7. DRIVE VALVES AND SHIELDS INSTALLATION (FRAME MOUNTED)
3121299 600S/660SJ 31

SECTION 2 - TURNTABLE
USA Built Machines (SN 0300171769 through 0300181891)
China Built Machines (SN B300000970 to Present)
CONTROL VALVES INSTALLATIONS
USA Built Machines (SN 0300171769 through 0300181891)
Control Valves Installations 600S (2WS)
Control Valves Installations 600S (4WS)
Control Valves Installations 660SJ (2WS)
Control Valves Installations 660SJ (4WS)
Control Valves Installations 600S (2WS)
Control Valves Installations 600S (4WS)
Control Valves Installations 660SJ (2WS)
Control Valves Installations 660SJ (4WS)
Main Control Valve Assy Options (See MAIN CONTROL
VALVE ASSEMBLY for Breakdown)
Hydraulic Pressure Filter Assembly
Indicator, Clogged Filter
O-Ring, Filter Bowl (Not Shown)
Valve Assembly (2 Speed/Brake) (See Items 101-103 for
Breakdown)
Valve Kit (Articulating Jib) Options:
Valve Kit 660SJ (See ACCESSORY VALVE ASSEMBLY for
Breakdown)
4WS Machines (See ACCESSORY VALVE ASSEMBLY for
Breakdown)
Harness Assembly (Jib Control) Options (See ELECTRICAL
SECTION for Breakdown):
Harness Assembly (4WS Control) Options (See ELECTRICAL
SECTION for Breakdown):
FIGURE 2-1. CONTROL VALVES INSTALLATIONS
3121299 600S/660SJ 39

SECTION 2 - TURNTABLE
USA Built Machines (SN 0300181891 to Present)
CONTROL VALVES INSTALLATIONS
Control Valves Installations 600S (2WS)
Control Valves Installations 600S (4WS)
Control Valves Installations 660SJ (2WS)
Control Valves Installations 660SJ (4WS)
Hydraulic Pressure Filter Assembly
Indicator, Clogged Filter
O-Ring, Filter Bowl (Not Shown)
Valve Assembly (2 Speed/Brake) (See Items 101-103 for
Breakdown)
Main Control Valve Assy Options (See MAIN CONTROL VALVE
ASSEMBLY for Breakdown):
Main Control Valve Assy 600S (2WS) & 660SJ (2WS)
Main Control Valve Assy 600S (4WS) & 660SJ (4WS)
VALVE ASSEMBLY (DUAL SELECT BRAKE/2 SPEED)
Seal Kit - 7012941 Cartridge
Seal Kit - 7012995 Cartridge
Plug, Orifice (Not Shown - Access to orifice is through port T)
AUXILIARY PUMP INSTALLATION
Bolt 3/8in-16NC x 1-1/4in
Auxiliary Pump Assembly (See Items 301-307 for Breakdown)
FIGURE 2-2. CONTROL VALVES INSTALLATIONS
3121299 600S/660SJ 43

SECTION 2 - TURNTABLE
USA Built Machines (SN 0300171769 through 0300181891)
China Built Machines (SN B300000970 to Present)
MAIN CONTROL VALVE ASSEMBLIES
Seal Kit - 7017410 Cartridge
Cartridge, Pressure Sensing
Control Valve Assembly (Platform Level)
Seal Kit - 7012914 Cartridge
Seal Kit - 7012914 Cartridge
Cartridge, Relief Valve (Platform Level Backward)
Seal Kit - 7012912 Cartridge
Cartridge, Relief Valve (Platform Level Forward)
Seal Kit - 7012912 Cartridge
Seal Kit - 7012989 Cartridge
Control Valve Assembly (Platform Rotate)
Control Valve Assembly (Upper Tele):
Control Valve Assembly (Flow Control)
Seal Kit - 7010542 Cartridge
Seal Kit - 7010542 Cartridge
Seal Kit - 7010542 Cartridge
Seal Kit - 7010542 Cartridge
Seal Kit - 7010542 Cartridge
Cartridge, Relief Valve (Upper Lift Down)
Seal Kit - 7012912 Cartridge
FIGURE 2-3. MAIN CONTROL VALVE ASSEMBLY
3121299 600S/660SJ 45

SECTION 2 - TURNTABLE
USA Built Machines (SN 0300181891 to Present)
MAIN CONTROL VALVE ASSEMBLIES
Main Control Valve Assemblies 600S (2WS) & 660SJ (2WS)
Main Control Valve Assemblies 600S (4WS) & 660SJ (4WS)
Cartridge, Valve Less Coil (Dump)
Seal Kit - 70004652 Valve
Seal Kit - 70004655 Valve
Valve, Cartridge Less Coil
Seal Kit - 70004657 Valve
Valve, Solenoid Less Cartridge (Front Steer)
Seal Kit - 70004660 Valve
O-Ring, Solenoid Tube (Upper)
O-Ring, Solenoid Tube (Lower)
Valve, Directional Control (Telescope)
Seal Kit - 70004459 Valve
Valve, Directional Control (Lift & Swing)
Seal Kit - 70004666 Valve (1 Per Assy)
O-Ring, Solenoid Tube (2 Per Assy)
Seal Kit - 70003019 Valve (1 Per Valve)
Seal Kit - 70003019 Valve (1 Per Valve)
Valve, Directional Control (Rear Steer) (4WS Machines Only)
Seal Kit - 70004671 Valve
Capscrew M5 x 60 (Note: Not Available - Purchase Locally)
O-Ring (Note: Not Available for Purchase)
O-Ring (Note: Not Available for Purchase)
Plug #4 (Not Shown) (Note: Not Available for Purchase)
FIGURE 2-4. MAIN CONTROL VALVE ASSEMBLY
3121299 600S/660SJ 49

SECTION 2 - TURNTABLE
ACCESSORY VALVE ASSEMBLIES
ARTICULATING JIB VALVE ASSEMBLY
Seal Kit - 7012965 Cartridge
Directional Control Valve Assembly
Seal Kit - 7017421 Cartridge
Seal Kit - 7017422 Cartridge
Connector, DIN with Diode (Not Shown - Part of Valve Harness)
Capscrew, Socket Head 5/16in-18NC x 2-1/4in (Used to Mount
Valve Assembly)
Capscrew, Socket Head #10-24NC x 2in
O-Ring (Used to Mount Main Valve)
Seal Kit - 7017420 Cartridge
Directional Control Valve Assembly
Capscrew, Socket Head #10-24NC x 5in (Used to Mount Main
Valve)
Capscrew, Socket Head #10-24NC x 2in
O-Ring (Used to Mount Main Valve)
FIGURE 2-5. ACCESSORY VALVE ASSEMBLY
3121299 600S/660SJ 53

Housing/Shaft Assembly (Note: Not Available - Purchase
Individual Components.)
Bearing Kit (Includes Cup and Cone)
Bearing Kit (Includes Cup and Cone)
Housing, Brake (Note: Not Available - Purchase Complete Assy)
Bolt 3/8in-16NC x 2-1/4in (Grade 8)
Bolt 5/16in-18NC x 2in (Grade 8)
Lockwasher (Note: Not Available for Purchase.)
Plate, ID (Note: Not Available for Purchase.)
Lug, Lifting (Note: Not Available for Purchase.)
Bolt 1/2in-13NC x 2in (Grade 8)
Motor Assembly (See Items 101-125 for Breakdown)
Valve Assembly - Complete (No Serviceable Parts)
Commutator and Ring Assembly
SECTION 2 - TURNTABLE
FIGURE 2-7. SWING MOTOR/HUB ASSEMBLY
58 600S/660SJ 3121299

DEUTZ D2011 ENGINE INSTALLATIONS
Tier IVi Engines (All Specs Except ANSI and CSA Specs)
Tier IVi Flex Engines (ANSI and CSA Specs Only)
4WD Without Arctic Package
Tier IVi Engines (All Specs Except ANSI and CSA Specs)
Tier IVi Flex Engines (ANSI and CSA Specs Only)
Tier IVi Engines (ANSI Export Specs)
Tier IVi Flex Engines (ANSI and CSA Specs Only)
Tier IVi Engines (All Specs)
4WD Without Arctic Package
Tier IVi Engines (All Specs)
Tier IVi Engines (ANSI Export Specs)
Sealant, Pipe (Not Shown)
Bolt 1/4in-20NC x 1-1/4in
Bolt 3/8in-16NC x 1-1/4in
Bolt 5/8in-11NC x 1-1/4in
Screw, Countersunk 3/8in-16NC x 1-1/4in
Decal - Diesel (Not Shown - Located on Hood)
Flatwasher 5/16in Regular
Cable, Battery (Black) (Battery - to Tray Pivot/Relay Grd)
Terminal, Battery (with Boot)
Cable, Battery (Black) (Battery - to Aux Pump Grd)
SECTION 2 - TURNTABLE
FIGURE 2-8. DEUTZ D2011 ENGINE INSTALLATION
62 600S/660SJ 3121299

SECTION 2 - TURNTABLE
Cable, Battery (Black) (Engine Grd to Tray Pivot Grd)
Cable (Red) (Battery + to Relays/Starter)
Cable (Red) (Aux Relay to Aux Pump)
Note: Arctic Package Items (Used on Arctic Machines
Only) - Items 51 - 61 Not Shown.
Cable, Immersion Heater (Located on bottom of Hydraulic Oil
Tank)
Cord, 3 Way Extension (Located on Left Front of Engine)
Clamp (Located on Right Front of Engine Tray)
Decal - Battery Heater (Located on Battery Heater)
Decal - Engine Block Heater (Located on Right Side of
Engine)
Decal - Hydraulic Tank Heater (Located on bottom of
Hydraulic Oil Tank)
Decal - Heater Cord (Located on Left Front of Engine)
Heater, Battery (Located on Battery)
Heater, Hydraulic Tank (Located on bottom of Hydraulic Oil
Tank)
Seat, Battery (Located on Battery)
Cord, 8ft Extension (Located at Battery)
Cable, Immersion Heater (Located on bottom of Hydraulic Oil
Tank)
Decal - Warning Explosion/Fire Options:
ENGINE AND PUMP ASSEMBLIES
Tier IVi Engines (All Specs Except ANSI and CSA Specs)
Tier IVi Flex Engines (ANSI and CSA Specs Only)
4WD Without Arctic Package
Tier IVi Engines (All Specs Except ANSI and CSA Specs)
Tier IVi Flex Engines (ANSI and CSA Specs Only)
Tier IVi Engines (ANSI Export Specs)
Tier IVi Flex Engines (ANSI and CSA Specs Only)
Tier IVi Engines (All Specs)
4WD Without Arctic Package
Tier IVi Engines (All Specs)
Tier IVi Engines (ANSI Export Specs)
3121299 600S/660SJ 63

Bolt 1/2in-13NC x 1-1/2in
Gear Pump Assembly with Fittings (See GEAR PUMP
ASSEMBLY for Breakdown)
Capscrew 3/8in-16NC x 1-1/4in
Flatwasher 3/8in Hardened
Piston Pump Assembly with Fittings Options (See PISTON
PUMP ASSEMBLY for Breakdown):
Machines Without Arctic Package
Tier IVi Engines (All Specs Except ANSI and CSA Specs)
Tier IVi Flex Engines (ANSI and CSA Specs Only)
Machines With Arctic Package
Tier IVi Engines (ANSI Export Specs)
Tier IVi Flex Engines (ANSI and CSA Specs Only)
Machines Without Arctic Package
Tier IVi Engines (All Specs)
Machines With Arctic Package
Tier IVi Engines (ANSI Export Specs)
Bolt 1/4in-20NC x 1-1/8in
Bolt 1/4in-20NC x 1-1/4in
Bolt 5/16in-18NC x 1-1/4in
Bolt 1/4in-20NC x 1-1/2in
Bolt 3/8in-16NC x 1-1/8in
Bolt 3/8in-16NC x 1-1/4in
Bolt 1/2in-13NC x 2-1/2in
Bolt 14mm x 30mm Grade 10.9
Decal - Caution Fan Blade
Pump Coupling Kit (See Items 301-303 for Breakdown)
Oil, Motor Options (Not Shown)
SECTION 2 - TURNTABLE
64 600S/660SJ 3121299

SECTION 2 - TURNTABLE
Air Cleaner Assembly Filter Element
Element, FIlter (Not Shown)
Engine, Deutz - D2011 Options (See Items 401-426 for
Serviced Components):
Tier IVi Engines (All Specs Except ANSI and CSA Specs)
Tier IVi Flex Engines (ANSI and CSA Specs Only)
Tier IVi Engines (All Specs)
Plate, Engine Mounting (Front Left Side)
Plate, Engine Mounting (Rear Left Side)
Plate, Engine Mounting (Rear Right Side)
Pipe used with Standard Muffler
Pipe used with Optional Mufflers (Note: See Item 419)
Note: Arctic Package Items (Used on Arctic Machines
Only) - Item 281 Not Shown.
PUMP COUPLING INSTALLATION
Plate, Pump Adapter (Note: Not Available - Purchase p/n
3121299 600S/660SJ 65

Bolt M10 x 20mm Grade 10.9 (Note: Not Available - Purchase
Locally)
Bolt M10 x 25mm Grade 10.9 (Note: Not Available - Purchase
Locally)
Flatwasher M10 (Note: Not Available - Purchase Locally)
Tier IVi Engines (All Specs Except ANSI and CSA Specs)
Tier IVi Flex Engines (ANSI and CSA Specs Only)
Tier IVi Engines (All Specs)
Seal, Rear Main (Not Shown)
Ring Gear (Located on Flywheel - Not Shown)
Gasket, Head Options (Not Shown):
Gasket, Valve Cover (Not Shown)
Gasket Kit (Note: Does not include Head Gasket)
Kit, Timing Belt/Idler (Not Shown)
Seal Between Oil Pump and Engine Block (Not Shown)
Gasket, Bracket to Engine Block
Connector, Radiator Hose (Not Shown)
Ring, Sealing (Not Shown)
Repair Kit for 70000916 Pump
O-Seal Between Fuel Pump and Engine Block
Intake Manifold Components
Seal (Flange to Air Intake Manifold)
SECTION 2 - TURNTABLE
66 600S/660SJ 3121299

SECTION 2 - TURNTABLE
Gasket, Intake Manifold to Engine Block (Not Shown)
Screw, Torx Head (Not Shown)
Breather Valve (Not Shown - Located On Front Cover)
Cable, Interconnect (Module to 70001872 Cable)
Cable (Alternator to 70001872 Cable)
Cable (Starter to 70001872 Cable)
Right Module Connections:
Standard Muffler (Supplied with Engine)
Spark Arrester Muffler (was p/n 0256689)
Catalytic Muffler (was p/n 0256690)
Clamp, Saddle for 3220103 Muffler and Standard Muffler
Clamp for 3220104 Muffler
Plug, Brass (3220103 & 3220104 Mufflers)
Pipe, Exhaust Standard Muffler (Note: See Item 255)
Pipe, Exhaust (3220103 & 3220104 Mufflers)
Gasket, Exhaust Manifold to Engine Block
Regulator, Voltage Options (Not Shown)
Seal, Gasket for Voltage Regulator (Not Shown)
Bracket, Mounting (Not Shown)
Bracket, Adjusting (Not Shown)
RIGHT ENGINE SUPPORT INSTALLATIONS
Machines without Generator
Bolt 3/8in-16NC x 1-1/8in
Bolt 1/2in-13NC x 2-1/2in
Bolt 1/4in-13NC x 2-1/2in
Bolt 14mm x 30mm Grade 10.9
3121299 600S/660SJ 67

SECTION 2 - TURNTABLE
Note: Only Available on USA Built Machines.
DEUTZ TD2.9LA ENGINE INSTALLATIONS
2WD Machines Without Arctic Package
4WD Machines Without Arctic Package
All Machines With Arctic Package
Bolt 3/8in-16NC x 1-1/8in
Bolt 3/8in-16NC x 1-1/4in
Bolt 5/8in-11NC x 1-1/4in
Screw, Flat Head 3/8in-16NC x 1-1/4in
Bolt M12 x 25mm Grade 10.9
Fitting, Straight Barbed (SN 0300171769 through 0300184118)
Fitting, Straight Barbed (SN 0300184119 to Present)
Fitting, 90 Barbed (SN 0300171769 through 0300195438)
Fitting, 90 Barbed (SN 0300195439 to Present)
Capscrew 1/4in-20NC x 1-1/2in
Battery Cable Kit Options:
Machines without Arctic Package
Machines with Arctic Package
FIGURE 2-9. DEUTZ TD2.9L4 ENGINE INSTALLATION
3121299 600S/660SJ 73

Cable, Battery (Black) (Battery - to Tray Pivot Grd)
Machines without Arctic Package
Machines with Arctic Package
Terminal, Battery (with Boot)
Cable, Battery (Black) (Battery - to Aux Pump and Relay
Grounds)
Machines without Arctic Package
Machines with Arctic Package
Cable, Battery (Black) (Engine to Tray Pivot Grd)
Machines without Arctic Package
Machines with Arctic Package
Cable (Red) (Aux Relay to Aux Pump)
Machines without Arctic Package
Machines with Arctic Package
Cable (Red) (Battery + to Aux Relay/Power Module/Starter)
Machines without Arctic Package
Machines with Arctic Package
Harness, Fuel (Not Shown - See ELECTRICAL SECTION for
Breakdown)
Fitting, 90 Quick Disconnect
Decal - Diesel (Not Shown - Located on Front of Fuel Tank)
Note: Arctic Package Items 77 - 87 (Used on Arctic Machines
Only) Not Shown.
Decal - Engine Block Heater
Decal - Hydraulic Tank Heater
Decal - Warning Explosion/Fire Options:
SECTION 2 - TURNTABLE
74 600S/660SJ 3121299

SECTION 2 - TURNTABLE
ENGINE AND PUMP ASSEMBLIES
2WD Machines without Arctic Package
4WD Machines without Arctic Package
All Machines with Arctic Package
Bolt 1/2in-13NC x 1-1/2in
Lanyard (SN 0300171769 through 0300182649)
Lanyard (SN 0300182650 to Present)
Gear Pump Assembly with Fittings (See GEAR PUMP
ASSEMBLY for Breakdown)
Bolt 3/8in-16NC x 1-1/4in
Flatwasher 3/8in Hardened
Pump Assembly with Fittings Options (See PISTON PUMP
ASSEMBLY for Breakdown):
2WD Machines without Arctic Package
4WD Machines without Arctic Package
All Machines with Arctic Package
Bolt 5/16in-18NC x 2-1/4in
Bolt 3/8in-16NC x 1-1/8in
Bolt 3/8in-16NC x 2-1/2in Grade 8
Bolt 1/2in-13NC x 2-1/2in Grade 8
Screw, Flathead 3/8in-16NC x 5/8in
Bolt M12 x 25mm Grade 10.9
3121299 600S/660SJ 75

Harness, Engine (Not Shown - See ELECTRICAL SECTION for
Breakdown)
Cable, Alternator Power (See ELECTRICAL SECTION for
Breakdown)
Air Cleaner Assembly Filter Element
Element, Filter (Not Shown)
Note: Arctic Package Item 351 (Used on Arctic Machines
Only) Not Shown.
KIT PUMP COUPLING AND MOUNTING PLATE
Bolt M10 x 20mm Grade 10.9 (Note: Not Available - Purchase
Locally)
Bolt M10 x 25mm Grade 10.9 (Note: Not Available - Purchase
Locally)
Flatwasher M10 (Note: Not Available - Purchase Locally)
Dipstick (Not Shown - Located On Side Left Front)
Gasket and Seal Options (Not Shown):
Gasket, Small Valve Cover
Gasket, Large Valve Cover
Gasket, Valve Cover to Air Charge Elbow
Gasket, Exhaust Manifold to Head
Gasket, Exhaust Manifold to Turbocharger
Pump, Oil Lube (Not Shown - Located Front Left SIde)
SECTION 2 - TURNTABLE
78 600S/660SJ 3121299

SECTION 2 - TURNTABLE
Pump, High Pressure (Not Shown - Located Front Left SIde)
O-Ring (Between Pump and Spacer)
O-Ring (Between Spacer and Engine Block)
Harness, Glow Plug (Not Shown)
ECU (Engine Control Unit)
Module, EGR (Not Shown - Located on Left Side)
Starter (Not Shown - Located on Left Side)
Harness, Engine (Not Shown)
Sensor, Speed (Not Shown - Located Left Side Front and Flywheel
Housing)
Sender, Temperature (Not Shown - Located Top Front)
Sensor, Pressure (Not Shown - Located Left Side Front)
3121299 600S/660SJ 79

Note: Only Available on USA Built Machines.
Bolt 1/4in-20NC x 2 1/4in
Bolt 5/16in-18NC x 1in (SN 0300171769 through 0300174311)
Capscrew 5/16in-18NC x 1-3/4in (was p/n 0641514) (SN
0300171769 through 0300174311)
Bolt 3/8in-16NC x 1-1/2in
Bolt 5/8in-11NC x 1-1/4in
Bracket, Fuel Pump Filter
Fluid, Anti-Freeze (Not Shown)
Hose, Hi Pressure Fuel Line (6in/15cm Length) (SN 0300171769
through 0300183233)
Hose, Hi Pressure Fuel Line (6in/15cm Length) (SN 0300183234
to Present)
Hose, Hi Pressure Fuel Line (4ft/1.2cm Length) (SN 0300171769
through 0300183233)
Hose, Hi Pressure Fuel Line (4ft/1.2m Length) (SN 0300183234
to Present)
Hose (SN 0300171769 through 0300183233)
Hose (SN 0300183234 to Present)
Locknut 5/16in-18NC (SN 0300171769 through 0300174311)
Panel, Rubber (SN 0300171769 through 0300174311)
Plate, Hold Down (SN 0300171769 through 0300174311)
O-Ring (Not Shown - Located in Console Box)
SECTION 2 - TURNTABLE
FIGURE 2-10. GM ENGINE INSTALLATION
84 600S/660SJ 3121299

SECTION 2 - TURNTABLE
Switch, Toggle (Not Shown - Located in Console Box)
Flatwasher 5/16in Regular
Locknut with Nylon Lock 5/16in-18NC
Hose, Fuel Line (SN 0300171769 through 0300183233)
Hose, Fuel Line (SN 0300183234 to Present)
Bracket, Baffle Support (SN 0300171769 through 0300174311)
Flatwasher, Special (SN 0300171769 through 0300174310)
Bolt 3/8in-16NC x 1-1/4in (SN 0300174311 to Present)
Flatwasher 3/8in (Wide) (SN 0300174311 to Present)
Bracket, Engine Tray Mount (SN 0300174311 to Present)
Fitting, Quick Disconnect
GM ENGINE AND PUMP SUB-ASSEMBLY
Bolt 1/2in-13NC x 1-1/2in
Cable (Battery - to Ground)
Cable (Battery + to Auxiliary Relay)
Cable (Relay to Auxiliary Pump)
Cable (Auxiliary Pump to Ground)
Piston Pump Assembly with Fittings Options (See PISTON
PUMP ASSEMBLY for Breakdown):
Gear Pump Assembly with Fittings (See GEAR PUMP
ASSEMBLY for Breakdown)
Bolt 3/8in-16NC x 1-1/4in
Flatwasher 3/8in Hardened
Engine, GM 3.0L (See GM Engine Supplement P/N 3121245 for
3121299 600S/660SJ 85

SECTION 2 - TURNTABLE
Cover, Front (Pump Assembly p/n 3600388) (2WD)
Cover, Front (Pump Assembly p/n 3600381) (4WD)
Journal, Bearing Options:
Journal, Bearing (Pump Assembly p/n 3600388) (2WD)
Journal, Bearing (Pump Assembly p/n 3600381) (4WD)
Adaptor, Remote Filtration
Ring, Piston (Note: Use Item 200A or 200B)
O-Ring (Note: Use Item 200A or 200B)
Valve, Bypass (Pump Assembly p/n 3600388) (2WD)
Valve, Bypass (Pump Assembly p/n 3600381) (4WD)
Valve, Pressure Relief Options (Includes Item 6):
Valve (Pump Assembly p/n 3600388) (2WD)
Valve (Pump Assembly p/n 3600381) (4WD)
Plug, Orifice/Screen (.156)
PISTON PUMP AND FITTING ASSEMBLIES
3121299 600S/660SJ 91

SECTION 2 - TURNTABLE
Bolt 3/8in-16NC x 2-1/4in
Bolt 1/2in-13NC x 1-3/8in
Plug (Deutz Engine Machines Only)
Strap, Tank (Deutz Engine Machines Only)
Strip, Protective (Deutz Engine Machines Only)
Standard Black Cap (GM Engine Machines) (Not Shown)
Standard Black Cap (Deutz Engine Machines)
Optional Blue Cap (Deutz Engine Machines) (Not Shown)
(Not Included with Tank)
Tube, Fuel Pick-up (with Fitting) Options:
Hydraulic Tank Assembly (See Items 101-110 for Breakdown)
Flatwasher 1/2in Hardened
Note: Items 54 - 75 Used on GM Engine Machines Only
Bolt 1/2in-13NC x 2-1/4in
FIGURE 2-13. TANK INSTALLATIONS
3121299 600S/660SJ 97