Jensen JE4015 User Manual

JE4015

LED TV User’s Guide

Please observe all safety precautions when using this product. Please read this manual carefully.

Guide de l’utilisateur du téléviseur LED

Veuillez observer toutes les mesures de sécurité en utilisant ce produit. Veuillez lire soigneusement ce manuel avant d’utiliser ce produit.

English

Français

hsilgnE

		CONTENTS
	Safety Precautions
	Important Information	.................................................................................	3
	Important Safeguards
			4 - 5

User Guidance Information

Part identification (Right View) / Accessories ....................................................... 6

Part identification (Back View) ....................................................................	7
Mounting on a Desktop / Installation Precautions.....................................................	8
Installing an Antenna ............................................................................ 9
Remote control...............................................................................	10 - 11

Precautions / How to use the remote control ........................................................ 12

Connection

	VCR Connections / Digtial Amplifier Connections / Watching Video Tape		................................13
	Satellite/Cable TV Set-Top Box Connections / Watching Cable TV..................................... 14
	DVD Connections / USB Connections / Playing the DVD ............................................		15
	PC Connections / External Audio Amplifier / How to use as a PC monitor...............................		16
	Basic Use
	Selecting input source / Initial Setup Wizard		17
	Application
	Menu Operation		18
	Customizing the PICTURE Settings .................................................................		19
	Customizing the AUDIO Settings ..................................................................		20
	Customizing the TIMER Settings ...................................................................		21
	Customizing the SETUP Settings ................................................................		22 - 23
	Customizing the LOCK Settings .................................................................		24 - 26
	Customizing the CHANNEL Settings .............................................................		27 - 28
	USB Settings.....................................................................................		29
	Maintenance and Service
	Troubleshooting		30
	Specifications		31
		....................................................................................

2

Important Information

hsilgnE

WARNING

IMPORTANT SAFETY INSTRUCTIONS

To reduce the risk of fire or electric shock,do not expose this product to rain or moisture.

This symbol is intended to alert the user to the presence of uninsulated “ dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

This product utillizes tin-lead solder, and fluorescent lamp containing a small amount of mercury. Disposal of these materials may be regulated due to environmental considerations. For disposal or recycling information,please contact your local authorities or the Electronic Industries Alliance: www.eia.org.

FCC STATEMENT

1)Read these instructions.

2)Keep these instructions.

3)Heed all warnings.

4)Follow all instructions.

5)Do not use this product near water.

Apparatus should not be exposed to dripping or splashing and no objects filled with liquids, such as vases, should be placed on the product.

6)Clean only with a dry cloth.

7)Do not block any ventilation openings. Install in accordance with the manufacturer’s instrutions.

8)Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus(including amplifiers) that produce heat.

9)Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10)Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11)Only use attachments / accessories specified by

	This product has been tested and found to comply with	the manufacturer.
	the limits for a Class B digital device, pursuant to part 15	12) Use only with the cart, stand, tripod, bracket, or
	of the FCC Rules. These limits are designed to provide	table specified by the manufacturer or sold with
	reasonable protection against harmful interference when	the apparatus.
	the equipment is operated in a commercial environment.
		when a cart is used, use caution when
	This product generates, uses, and can radiate radio
		moving the cart / apparatus combination
	frequency energy and, if not installed and used in accordance
		to avoid injury from tip-over.
	with the instruction manual, may cause harmful interference
		13) Unplug this apparatus during lightning storms
	to radio communications.Operation of this equipment in a
	residential area is likely to cause harmful interference	or when unused for long periods of time.
	in which case the user will be required to correct the	14) Refer all servicing to qualified service
	interference at his own expense.	personnel.Servicing is required when the
	FCC CAUTION:	product has been damaged in any way, such as
		power-supply cord or plug is damaged, liquid
	Pursuant to 47CFR, Part 15.21 of the FCC rules, any	has been spilled or objects have fallen into the
	changes or modifications to this monitor not expressly	product, the product has been exposed to rain
	approved by the manufacturer could cause harmful
		or moisture, does not operate normally, or has
	interference and would void the user’s authority to
		been dropped.
	operate this device.
		15) Where the mains plug or an appliance coupler is
	WARNING	used as the disconnect device, the disconnect
	This is a CLASS B product. In a domestic encironment,	device shall remain readily operable.
	this product may cause radio interference, in which cause
	the user may be required to take adequate measures to
	counter interference

3

English

Important Safeguards

Before using your TV, please read these instructions completely, and keep this manual for future reference, Carefully observe and comply with all warnings, cautions and instructions placed on the unit or described in the operating instructions or service manual.

WARNING

To guard against injury, the following basic safety precautions should be observed in the installation, use and servicing of the unit.

Power Sources

This unit should be operated only from the type of power source indicated on the information label. If you are not sure of the type of electrical power supplied to your home, consult your dealer or local power company.

Grounding or Polarization

This unit is equipped with a polarized AC power cord plug (a plug having one blade wider than the other), or a DC power connection, for use in a vehicle. Follow the instructions below:

For the unit with a polarlzed AC power cord plug

This plug will fit into the power outlet only one way.This is a safety feature. If you are unable to insert the plug fully

into the outlet, try reversing the plug.If the plug still fails to fit, contact your electrician to have a suitable outlet installed. Do not defeat the safety purpose of the polarized plug by forcing it in.

For the unit with a DC power connector

For installation in a vehicle, connect the red wire to the 12V accessory line and the black wire to ground terminal.

Wall outlet

Do not use a poor fitting outlet.

Insert the plug fully into the outlet. If it is loose, if may cause arcing and result in fire. Contact your electrician to have the outlet changed.

Wiring

For your safety, unplug the power cord when wiring cables.

Electric shock

Do not touch the AC power cord or the unit with a wet hand. If you plug / unplug the AC power cord from the unit with a wet hand, it may cause electric shock.

Never attempt to move the unit unless the AC power cord is disconnected.

Cleaning

Clean the power plug regularly.

If the plug is covered with dust and it picks up moisture, its insulation may deteriorate and result in fire.

Unplug the power plug and clean it regularly.

Unplug the power cord when cleaning this unit. If not, it may result in electric shock.

Clean the cabinet of the TV with a dry soft cloth. To remove dust from the screen, wipe it with a soft cloth.

Stubborn stains may be removed with a cloth slightly dampened with a solution of mild soap and warm water. Never use strong solvents such as thinner or benzine for cleaning.

If using a chemically pre-treated cloth, please follow the instructions provided on the package.

Overloading

Do not overload wall outlets, extension cords or convenience receptacles beyond their capacity, since this can result in fire or electric shock.

Power

Always turn the unit off when it is not being used. When the unit is left unattended and unused for long periods of time, unplug it from the wall outlet as a precaution against the possibility of an internal malfunction that could create a fire hazard.

Sound

If a snapping or popping sound from the TV is continuous or frequent while the TV is operating, unplug the TV and consult your dealer or service technician. It is normal for TV’s to make occasional snapping or popping sounds, particularly when being turned on or off.

Power Cord

If you damage the power cord, it may result in fire or electric shock.

Do not pinch, bend, or twist the cord excessively.The core lines may be bared and cut and cause short-circuit, resulting in fire or electric shock.

Do not convert or damage the power cord.

Do not put anything heavy on the power cord.

Do not pull the power cord.

Keep the power cord away from heat sources.

Be sure to grasp the plug when disconnecting the power cord.

If the power cord is damaged, stop using it and replace with a new one.

Ventilation

The slots and openings in the TV are provided for necessary ventilation. To ensure reliable operation of the unit, and to protect it from overheating, these slots and openings must never be blocked or covered. Unless proper Yentilation is provided, the unit may gather dust and get dirty. For proper ventilation, observe the following:

Do not install the unit turned backward or sideways.

Do not install the unit turned over or upside down.

Never cover the slots and openings with a cloth or other materials.

Never block the slots and openings by placing the unit on a bed, sofa, rug or other similar surface.

Never place the unit in a confined space, such as a bookcase or built-in cabinet, unless proper ventilation is provided.

Leave some space around the unit. Otherwise, adequate air-circulation may be blocked, causing overheating, and may cause fire or damage the unit.

Heat sources

Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

4

hsilgnE

Important Safeguards

Do not use this product near water

Do not use near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool.

Do not use immediately after moving from a low temperture to high temperature environment, as this cause condensation, which may result in fire, electric shock, or other hazards.

This product should not be exposed to dripping or splasing and no objects filled with liquids, such as vases, should be placed on the product.

Entering of objects and liguids

Never insert an object into the product through vents or openings. High voltage flows in the product, and inserting an object can cause electric shock and / or short internal parts. For the same reason, do not spill water or liquid on the product.

Lightning

Unplug this apparatus during lightning storms or when unused for long periods of time.

For added protection during a lightning storm, or when left unattended and unused for long periods of time, unplug the product from the wall outlet and disconnect the antenna. This will prevent damage to the equipment due to lightning and power-line surges.

Servicing

Refer all servicing to qualified service personnel. Servicing is required when the product has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Replacement parts

Safety checks

Upon completion of service or repair work, request the service technician to perform safety checks to ensure that the product is in proper operating condition.

Wall or ceiling mounting

When mounting the product on a wall or ceiling, be sure to install be product according to the method recommended by the manufacturer.

Panel protection

This panel used in this product is made of glass. Therefore, it can break when the product is dropped or impacted upon by other objects. Be careful not to be injured by broken glass pieces if the panel breaks.

Pixel defect

Occasionally, a few non-active pixels may appear on the screen as a fixed point of blue,green or red. Please note that this does not affect the performance of your product.

Antennas

Outdoor Antenna Grounding

If an outdoor antenna is installed, follow the precautions below. An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits.

WHEN INSTALLING AN OUTDOOR ANTENNA SYSTEM, EXTREME CARE SHOULD BE TAKEN TO KEEP FROM CONTACTING POWER LINES OR CIRCUITS AS CONTACT WITH THEM IS ALMOST INVARIABLY FATAL.

In case the product needs replacement parts, make sure the service person uses replacement parts specified by the manufacturer, or those with the same characteristics and performance as the original parts. Use of unauthorized parts can result in fire, electric shock and / or other danger.

Attachments

Only use attachments / accessories specified by the manufacturer. Do not use attachments not recommended by the manufacturer. Use of improper attachments can result in accidents.

Damage reguiring service

If any of the following conditions occurs, unplug the power cord from the AC outlet and request a qualified service person to perform repairs.

a.The power cord or plug is damaged.

b.Liquid is spilled on the product or when objects have fallen into the product.

c.The product has been exposed to rain or water.

d.The product does not operate properly as described in the operating instructions.

Do not touch the controls other than those described in the operating instructions. Improper adjustment of controls not described in the instructions can cause damage,which often requires extensive adjustment work by qualified technician.

e.The product has been dropped or the cabinet has been damaged in any way.

f.The product displays an abnormal condition or exhibits a distinct change in performance. Any noticeable abnormality in the product indicates that the product needs servicing.

Be sure the antenna system is grounded to provide some protection against voltage surges and built-up static charges.Section 810 of the National Electrical Code ( NEC ) in USA and Section 54 of the Canadian Electrical Code in Canada provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit,connection to grounding electrodes, and requirements for the grounding electrode.

Antenna Grounding According to the National Electrical Code, ANSI/NFPA 70

		Antenna lead-in wire
	Ground clamps
		Antenna discharge unit
	Electric service	( NEC Section 810-20)
		Grounding conductors
	equipment
		( NEC Section 810-21)
		Ground clamps
		Power service grounding
		electrode system
		(NEC Art 250 Part H)

NEC: National Electrical Code

5

User Guide Information

Part Identification

Right View

JE4015

SOURCE

SOURCE Button	VOL- / VOL+Button
MENU Button-OSD Menu Display Button	POWER Button
CH-/ CH+Button

English

Accessories

The configuration of the components may look different from the following illustration.

AV Cable

x

Remote Control

6

Part Identification

Back View

JE4015						10
						9
						8
			1		3	7
			V	Y Pb	Pr	7
			AV&
2	3	4	5	6	7

1. AC IN

2. AUDIO (L/R) OUT

3. HEADPHONE OUTPUT

2

4. SPDIF OUTPUT

5. AV IN ( VIDEO and AUDIO)

8

hsilgnE

6.COMPONENT INPUT

7.HDMI 1 / HDMI 2 / HDMI 3 INPUT

8.PC IN (VGA and AUDIO) INPUT

9.RF IN

10. USB Port

7

User Guide Information

Mounting on a Desktop

Your LED TV can be mounted on a desktop with the base installed.

This is not a floor-standing unit.

Installation Precautions

Wall Mounting

Please ensure enough space for safe use. Please refer to diagrams A and B.

Installation of the LED TV in an improperly ventilated location can cause damage to the LED TV due to increased temperature.

	1
	1
1	1
(Mounting on a wall)
	1

Contact your dealer to purchase the Adjustable-angle wall mountrequired for wall-mounted installation.

Using the Stand

Do not install on an unstable location with a support area smaller than the LED TV.

Please refer to the desktop stand user s manual for details of installation.

(Using the Stand)

8

User Guide Information

Installing an Antenna

For connecting to ATSC or NTSC broadcast

Use a coaxial cable to connect the wall jack or external antenna to the RF-IN on the LED TV

Wall Jack with

F-Connector

Coaxial (Round) Antenna Cable	Analog+Digital 75

Press the SOURCE button on the remote control to select TV, then press RIGHT button to confirm. Then you can receive the ATSC/NTSC signal.

hsilgnE

9

User Guide Information

E n g l i s English

Remote Control

Funtions of remote control buttons

1		2	3
4	5	6	7
8	9	10	11
12	13	14	15
16	17	18	19
20	21	22	23
24	25	26	27
28		29	30
		31
32			33
		35
34		36	37
		38

39 40

1TV Activate TV Mode

2POWER On / off for TV and DVD

3DVD Activate DVD Mode

4PREVIOUS

5FAST REVERSE

6FAST FORWARD

7NEXT

8EJECT (DVD)

9STOP

10PLAY/PAUSE

11RPT Repeat Selection

12T/F (DVD)

13ZOOM (DVD)

14SUB-T (DVD)

15DISP (DVD) Display Time or Chapter information

16SET UP (DVD)

17AUDIO (DVD)

18EQ (DVD)

19TITLE (DVD)

20C-LIST Press C-LIST button to display the channel list

21F-LIST Press this button to display the favourite list

22MTS/SAP Press MTS/SAP to select Stereo, SAP or Mono

23SOUND Press SOUND to cycle select sound

			types: Standard / Music / Movie / Personal.
24		SLEEP	Cycles through the LED TV sleep time:off / 5 /
			10 / 15 / 30 / 45 / 60 / 90 / 120 / 180 / 240 minutes
	25	CC	Closed Captions
	26	SCALE	Cycles scale modes: Wide, Zoom, Cinema, Normal.
27		PICTURE	Press PICTURE to cycle select picture
			types: Standard / Dynamic / Soft / Personal
	28	MENU	Displays the OSD menu on the screen
29		NAVIGATION	Move up, down, left or right
			Press INFO to display information
30		INFORMATION about the current channel.
	31	ENTER	Press ENTER to confirm your opeartion
	32	EPG	Displays the program guide
33		EXIT	Exits the current menu.
	34	CH+/CH-	Increase or Decrease channel
35		SOURCE	Displays AV Inputs

36MUTE Press once mutes audio, press again to restore audio

37VOL+/VOL- Increase or Decrease volume

38NUMERIC KEYS

39		Digital channel selection
40	RETURN	Return to previously viewed channel

10

User Guide Information

hsilgnE

Remote Control

BUTTON TV-FUNCTION		DVD-FUNCTION	BUTTON TV-FUNCTION		DVD-FUNCTION BUTTON		TV-FUNCTION	DVD-FUNCTION
POWER	POWER	POWER					STOP	STOP
			EPG	EPG
CH	CH+		T F		T-F		PLAY-PAUSE	PLAY-PAUSE
	CH-
VOL	VOL+	VOL+			EJECT		PREVIOUS	PREVIOUS
	VOL-	VOL-
RETURN	RETURN						FAST-REVERSE	FAST-REVERSE
MUTE	MUTE	MUTE	1	1	1		FAST-FORWARD FAST-FORWARD
MENU	MENU	MENU	2	2	2		NEXT	NEXT
INFO	INFO		3	3	3		RPT	RPT
						RPT
	UP	UP	4	4	4	ZOOM		ZOOM
	DOWN	DOWN	5	5	5	SUB T		SUB-T
	LEFT	LEFT	6	6	6	DISP		DISP
	RIGHT	RIGHT	7	7	7	SETUP		SETUP
ENTER	ENTER	OK	8	8	8	AUDIO		AUDIO
SOURCE	SOURCE	SOURCE	9	9	9	EQ		EQ
EXIT	EXIT		0	0	0	TITLE		TITLE
MTS/SAP	MTS-SAP		SCALE	SCALE		CC	CC
F-LIST	F-LIST		C-LIST	C-LIST		SLEEP	SLEEP
PICTURE	PICTURE		SOUND	SOUND

NOTE: DVD functions are intended for JENSEN DVD players only.

See your JENSEN DVD manual for more information.

11

User Guide Information

Precautions

Avoiding Remote Control Problems

1.Check the polarity (+,-) of the batteries in the remote control.

2.Check that the batteries are good.

English

Inserting Batteries in the Remote Control

1.Open the cover completely.

2.Insert the two supplied batteries (AA, 1.5V). Ensure that the polarities (+ and -) of the batteries are aligned correctly.

3.Replace the cover.

CAUTION: Risk of explosion if battery is replaced by incorrect type.

Dispose of used batteries according to national code (Recycling program).

How to use the remote control

The remote control should be operated within 30 feet (7m) and 300 to the left and the right of the IR receiver at the front of the LED TV.

Used batteries should be disposed of properly.

12

VCR Connections

Connecting to the Composite terminal

Terminals vary by manufacturer

(Included)

Connect the LED TV’s Composite In terminal to VCR’s Composite OUT terminal using the included Composite cable. (Make sure the color of the terminals and the colors of the cable are the same.)

Digital Amplifier Connections

Connecting to a Digital Amplifier

Terminals vary by manufacturer.

Digital Amplifier

SPDIF Cable (Not Included)

English

Watching Video Tape

1.Turn on the LED TV and press		SOURCE
		on the remote control.
2. Use	to move to AV.
3.Press ENTER	to confirm the source selection , will automatically enter the selection mode.

4.Turn on the VCR, insert the tape and press the play button.

13

Satellite / Cable TV Set-Top Box Connections

Connecting to the Composite terminal

In order to watch Cable TV, Subscribe to your local Cable TV company and install a separate receiver (Set-Top Box) Terminals vary by manufacturer

(Included)

Connect the LED TV’s Composite In terminal to the cable broadcasting receiver Composite Out terminal using the Composite cable. (Make sure the color of the terminals and the color of cables are the same)

Connecting to the HDMI terminal

English

HDMI Cable (Not Included)

Watching Cable TV

1.Turn on the LED TV and press		SOURCE
		on the remote control.
2. Use	to move to AV .	If HDMI has been connected, select HDMI .
3.Press ENTER	to confirm the source selection.

4.Turn on the cable broadcasting receiver and select the channel you wish to view.

14

Connection

DVD Connections

Connecting to the component terminal

Terminals vary by manufacturer

(Not Included)

Component Video Cable (Not Included)

1.Connect LED TV’s YPbPr (Component) terminal to DVD’ s Video Out terminal.

2.Connect LED TV’s Audio terminals to DVD’s Audio Out terminal.

3.It must match the component connection cable Y, Pb, Pr colors between the LED TV and DVD Player.

Connecting to the HDMI terminal

HDMI Cable(Not Included)

USB Connections

Connection to USB.

English

Note: This USB connection can be used for software upgrade and using the USB media (Audio + photos) player.

Playing DVDs

Turn on the LED TV and press the source button.

Press Source to cycle and select Component. If HDMI has been connected, selectHDMI.

3.Stop operation a few seconds, will automatically enter the selection mode.

4.Turn on the DVD player, insert the DVD disc and press the Play button.

15

PC Connections

Terminals vary by manufacturer.

VGA Cable (Not Included)

PC Audio Cable (Not Included)

Connect the LED TV’s PC Input terminal to the PC’s VGA terminal using a VGA cable.

Connect the LED TV’s PC Audio terminal to the PC’s Audio terminal using a 3.5mm (Headphone) audio cable. (Only for PC’s with an Audio terminal)

English

External Audio Amplifier

Connecting to an amplifer or home theater system.

Terminals vary by manufacturer.

(Not Included)

Connect the LED TV’s AUDIO (L/R) output terminal to Audio Amplifier using an audio patch cable. Note: The speakers of LED TV still have output audio signal at this time.

You can use the Volume +/- buttons to adjust the audio output level.

How to use as a PC monitor

1.Turn on the LED TV and press	SOURCE
	on the remote control.

2. Use to move toVGA.

3.Press ENTER

to confirm the source selection.

16

Selecting Input Source

You can select between the TV signal and the input signal of other equipment connected to the TV. Use this function to switch to the input source you wish to view.

Press			button on the remote control.
Use			to move to the desired input source.
Press			to select.

Note: After you have selected the desired input sorce and pause for a few moments, then LED TV will automatically enter the seleted mode.

hsilgnE

Initial Setup Wizard

After connecting your TV antenna or Coaxial cable, turn the television ON.The quick setup wizard will display on-screen. Select your preferred language followed by antenna options and performing Auto Scan to receive local broadcast channels that will be stored in the TV tuner memory.

Setup Wizard

Menu Language		English
Air/Cable		Cable
Cable System		STD
Auto Scan
Select	Move	MENU Exit

The wizard will direct you to the TV menu to select antenna options and run the Channel Auto Scan. Channels found will be stored in the TV tuner memory.

How to Navigate:

•Press the arrow button to highlight Menu Language and then press button to select OSD Language.

•	Press the	arrow button to highlight CABLE / AIR based on your antenna connection.
•	Press the	arrow button to select	Auto Scan and press arrow (when Cable is selected, ‘AUTO’ is
	recommended). Otherwise, press the		arrow button to select Cable System : STD > IRC > HRC > Auto.

17

Application

h Engli s

Menu Operation

Press the POWER button to turn the LED TV on.

Press the MENU button on the remote control, the on-screen menu will appear.

Use the LEFT and RIGHT buttons to select your main menu option.

PICTURE MENU:	AUDIO MENU:
Allows you to make adjustments to your picture settings.	Allows you to customize the sound options and effects.

Picture

Audio

Time

Setup

Lock

Channel

Picture Mode	Standard
Contrast	50
Brightness	50
Color	50
Tint	0
Sharpness	50
Color Mode	Normal

HDMI CEC

Guide available @ www.jensenrvdirect.com/manuals-guides

Select

Move

MENU Exit

Picture

Audio

Time

Setup

Lock

Channel

Sound Mode	Standard	50
Bass
		50
Treble
		50
Balance
TV Speaker	Off
AVC	Off
SPDIF Type	PCM
Audio Language	English
Select	Move	MENU Exit

TIME MENU:	SETUP MENU:
Allows you to set up a variety of time options.	Allows you to set up a variety of setup options.

Picture	Audio	Time	Setup	Lock	Channel
Sleep Time				Off
Time Zone				Pacific
Daylight Saving Time				Off
Clock				2016/6/22
Select			Move	MENU	Exit

Picture

Audio

Time

Setup

Lock

Channel

Menu Language	English
Transparency	Off
Zoom Mode	Normal
Noise Reduction	Off
Closed Capation
Audio OUT	Fixed
Restore Default
Select	Move	MENU Exit

LOCK MENU:	CHANNEL MENU:
Allows you to set up a variety of lock options.	Allows you to search channels and set up a variety of channel options.

Picture

Audio

Time

Setup

Lock

Channel

Change Password

System Lock On

US

Canada

RRT Setting

Reset RRT

Move

Next

MENU Exit

Picture Audio Time

Air/Cable

Auto Scan

Favorite

ShowHide

Channel No

Channel Label

DTV Signal

Setup

Lock

Channel

Air

503 KOCELB

Good

Select

Move

MENU Exit

4Use the UP / DOWN buttons to select an option of the sub-menu, and press the RIGHT button. While in adjustment mode, use the LEFT / RIGHT buttons to change the value of the item.

5Press the MENU button to exit submenu to return to the main menu. Press the MENU button again or EXIT button to exit the main menu.

Note: Some options are not available for all inputs.

18

Application

hsilgnE

Customizing the PICTURE Settings

Select TV source for example. (Press SOURCE button to select TV mode)

1.Press the POWER button to turn the LED TV on

2.Press the MENU button on the remote control to display the Main menu, and use the LEFT and RIGHT buttons to select the PICTURE.

3.Use the UP and DOWN buttons to highlight an individual PICTURE options, use the LEFT and RIGHT buttons to change the setting, and press the MENU or EXIT button to exit.

		12
		6
Picture	Audio	Time	Setup	Lock	Channel

Picture Mode	Standard
Contrast	50
Brightness	50
Color	50
Tint	0
Sharpness	50
Color Mode	Normal

HDMI CEC

Guide available @ www.jensenrvdirect.com/manuals-guides

Select

Move

MENU Exit

The PICTURE menu includes the following options :

Picture Mode	Cycles through picture display modes: Standard, Dynamic, Soft, Personal.
Contrast	Controls the difference between the brightest and darkest regions of the picture.
Brightness	Controls the overall brightness of the picture
Color	Controls the color.
Tint	Controls the tint.
Sharpness	Increase this setting to see crisp edges in the picture; decrease it for soft edges .
Color Mode	Cycles through color modes: Normal, Cool, Warm.
HDMI CEC

Picture

Audio

Time

Setup

Lock

Channel

CEC Mode	On
Device Auto Standby	On
TV Auto Power	On
TV Auto Switch	On
Audio Receiver	On
Move	Select	MENU Return

If you turn off the CEC Mode then the following items (TV Auto Power,TV Auto

Switch,Device Auto Standby) will not be used.

TV Auto Power	On-TV will turn on when compatible CEC device is activated on HDMI
	connection.
TV Auto Switch	On-TV will switch to HDMI inputs when compatible CEC device
	is activated on HDMI connection.
Device Auto Standby	On-When TV turned off, any connected, compatible CEC device will
	also turn off.
Audio Receiver	Enables audio to be sent to an HDMI connected AV receiver.

19