QUICK SETUP GUIDE
Refrigerator Filter
NS-LT700P–1 / NS-LT700P-2 / NS-LT700P-2-C
PACKAGE CONTENTS
•Refrigerator filter(s) (1 or 2 pack)
•Quick Setup Guide
Before using your new product, please read these instructions to prevent any damage.
GENERAL INSTALLATION GUIDELINES
•It is normal for black carbon fines (particles) to appear on the outside of your filter. This happens when the filter is jarred in shipping. It is safe, simply wipe it off.
•The filter connectors are larger to prevent leaks. You might have to twist the filter hard to make sure the connection is secure.
•We apply a safe, NSF approved, food grade silicone lubricant to our filter connectors (jelly like substance).
LG®
LT700P
ADQ36006101, ADQ36006101-S, ADQ36006101S, ADQ36006102, ADQ36006102-S, ADQ36006102S, 048231783705
Sears® / Kenmore® 9690, 46-9690
Carefully remove the plastic cap from the new filter before installation. 1 Before installing your new filter, soak it in water for 15 minutes.
2 Press the button to open the filter cover.
3Pull the old filter down, then remove it.
Note: If you have a Kenmore refrigerator, check if there is a plastic or metal cap that covers the top of the old filter. If there is, pull off the cap and attach it to your new filter. If there is not, continue to step 4.
4 Push the new filter into the compartment horizontally until it stops. 5 Push up firmly as far as it will go.
6 Close the filter cover until it clicks into place.
7Run 2-3 gallons of water through your refrigerator to remove air and loose carbon pieces.
BEFORE USING YOUR FILTER
If your refrigerator has a change filter indicator, reset it. See“Resetting your filter indicator”for instructions.
Loading...