Insignia NS-SP213 Quick Start Manual

Quick Setup Guide

5-1/4" 2-Way Bookshelf Speakers (Pair) I NS-SP213

Congratulations on your purchase of a high-quality Insignia product. Your 2-Way Bookshelf Speakers are designed for reliable and trouble-free performance.

Package contents	Connecting your speakers		Positioning your speakers
• Speakers (2)	Back of speaker		Optional: Attach the adhesive-backed cushioned feet to
			the base of the speakers. Use the rubber feet alignment
			tool to help with alignment.
			NS-SP213	NS-SP213
	LEFT		RI Back of
			amplifier

	•	Rubber feet (8)	1 Loosen all speaker and amplifier terminals.
			2 Strip approximately 1/2" of insulation from the ends of your speaker wire
			(not provided).
			3 Connect the red (+) speaker terminals to the red (+) amplifier terminals
	• Rubber feet alignment tool		with your speaker wire, then tighten the terminal connectors.
			4 Connect the black (-) speaker terminals to the black (-) amplifier terminals
			with your speaker wire, then tighten the terminal connectors.
			See the documentation that came with your amplifier or home theater
			system for more information on connecting the cables.
	•	Quick Setup Guide	Note: For best performance, speaker wires must be connected correctly. All two-conductor
			wire is marked in some way to
			help with this. One side will be
			marked with a colored stripe,
			raised rib, or different-color
			conductor. Use the marked
			side for the“red”connections.
			We recommend using							Note: Make sure to
			18-gauge or heavier speaker
			wire.							connect the + terminal on
										the speaker to the
										+ terminal on the amplifier
										and connect the - terminal
										on the speaker to the
										- terminal on the
										amplifier.

Before using your new product, please read

these instructions to prevent any damage.

Amplifier/home theater system