Printing a Mounting Template
Notice
It is not recommended that you print a mounting template on your own. Use the template that came in the product box.
If you do print the template, you must follow these instructions for printing a mounting template precisely. To print large templates, you need large enough paper and printer. Failure to have the correct sized paper and printer, or a failure to follow these instructions, may result in an incorrectly sized template and therefore an incorrect cutout (too large or too small) on the mounting surface of your boat.
1 Select File > Print.
2 Select None for Page Scaling .
3 Ensure the check mark is next to Auto-Rotate and Center .
4Drag the arrow to the right, to view page 2 in the window below.
4Verify that the paper size is larger than the template .
In this example, the paper is not larger than the template.
5 If the paper size is not large enough, select Properties and select a Page Size that is larger than the template.
Notice
Garmin is not responsible for any damages or expenses resulting from a miscut mounting surface arising from a failure to follow these instructions.