Engineered Solutions | LECTUS secure readers (OSDP)
LECTUS secure readers (OSDP)
www.boschsecurity.com
System overview
Ideal for new and existing installations, LECTUS secure readers provide customers the assurance that their existing investments can be leveraged to enhance their system as business requirements change.
The technology-independent readers support standard iCLASS, MIFARE classic, and MIFARE DESFire EV1. Available with four different form factors LECTUS secure readers meet nearly all installation requirements for indoor and outdoor use.
Installation/configuration notes
The maximum cable length for OSDP / RS485 bus system is 1200m with twisted wire pairs. You can connect a maximum of eight readers per interface. Address the reader using the optional configuration cards. In order to prevent problems by reading cards with contact-free card readers, follow the instructions when planning and installing contact-free readers. Avoid installing contact-less card readers behind metallic (i.e. conductive) cases or on metallic surfaces. The gaps to be left are given in the following list:
•Distance between reader and metal surfaces attached to the side: min. 30 mm
•Distance between reader and 230 V~ voltage cables and power packs: min. 500 mm
•Distance between reader and HF-cables: min. 500 mm
u13.56 MHz proximity readers for connecting to access controllers with OSDP interfaces
uSuitable for indoor and outdoor use
uSupports multiple technologies (standard iCLASS, MIFARE®, and MIFARE DESFire® EV1)
uInteroperable with a growing range of technology environments and form factors
Technical specifications
Operating Voltage Range |
5 to 16 VDC |
|
|
Current Draw |
60 to 220 mA (peak), 16V (see manual |
|
for details) |
|
|
Environmental rating |
IP 55 (IP 65 with optional gasket) |
|
|
Operating temperature |
- 25 °C to 65 °C (-15 °F to 150 °F) |
|
|
Humidity |
5 to 95%, no condensation water |
|
|
Housing Material |
Polycarbonate (UL 94) |
|
|
Color |
Black |
|
|
Display |
Mulitcolored RGB LED bar |
|
|
Panel connection |
Terminal strip |
|
|
Card compatibility |
iCLASS |
|
Bosch coded MIFARE classic |
|
Bosch coded MIFARE DESFire EV1 |
|
When using configuration card: |
|
MIFARE classic serial number |
|
MIFARE DESFire EV1 serial number |
|
(32 bit standard, 56 bit optional) |
|
|
Operating freqeuncy |
13.56 MHz |
|
|