Automatic washing machine
ECO WMB 81445 LW
Please read this user manual first!
Dear Customer,
Thank you for prefering an Arçelik product. We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product and keep it as a reference for future use. If you handover the product to someone else, give the user manual as well. Follow all warnings and information in the user manual.
Remember that this user manual is also applicable for several other models. Differences between models will be identified in the manual.
Explanation of symbols
Throughout this user manual the following symbols are used:
C Important information or useful hints about usage.
A Warning for hazardous situations with regard to life and property.
B Warning for electric shock.
Packaging materials of the product are manufactured from recyclable
materials in accordance with our National Environment Regulations.
Do not dispose of the packaging materials together with the domestic or other wastes. Take them to the packaging material collection points designated by the local authorities.
2820522822/220312.1444
2 / 44 EN
TABLE OF CONTENTS
1 Important instructions for safety and |
|
environment |
4 |
1.1 General safety . . . . . . . . . . . . . . . . . . . . . . .4 1.2 Intended use . . . . . . . . . . . . . . . . . . . . . . . .4 1.3 Children's safety . . . . . . . . . . . . . . . . . . . . .5 1.4 Package information . . . . . . . . . . . . . . . . . .5 1.5 Disposing of the waste product . . . . . . . . . .5 1.6 Compliance with WEE Directive . . . . . . . . . .5
2 Your washing machine |
6 |
2.1 Overview. . . . . . . . . . . . . . . . . . . . . . . . . . .6 2.2 Package Contents . . . . . . . . . . . . . . . . . . . .7 2.3 Technical specifications . . . . . . . . . . . . . . . .8
3 Installation |
9 |
3.1 Appropriate installation location . . . . . . . . . .9 3.2 Removing packaging reinforcement . . . . . . .9 3.3 Removing the transportation locks . . . . . . . .9 3.4 Connecting water supply . . . . . . . . . . . . . .10 3.5 Connecting to the drain . . . . . . . . . . . . . . .11 3.6 Adjusting the feet . . . . . . . . . . . . . . . . . . .11 3.7 Electrical connection . . . . . . . . . . . . . . . . .12
4 Preparation |
14 |
4.1 Sorting the laundry . . . . . . . . . . . . . . . . . .14 4.2 Preparing laundry for washing . . . . . . . . . .15 4.3 Things to be done for energy saving . . . . . .15 4.4 Correct load capacity . . . . . . . . . . . . . . . . .15 4.5 Loading the laundry. . . . . . . . . . . . . . . . . .16 4.6 Using detergent and softener . . . . . . . . . . .16 4.7 Initial use . . . . . . . . . . . . . . . . . . . . . . . . .18 4.8 Tips for efficient washing . . . . . . . . . . . . . .19
5 Operating the product |
20 |
5.1 Control panel. . . . . . . . . . . . . . . . . . . . . . .20 5.2 Display symbols . . . . . . . . . . . . . . . . . . . .20 5.3 Preparing the machine . . . . . . . . . . . . . . . 21 5.4 Programme selection. . . . . . . . . . . . . . . . .21 5.5 Main programmes . . . . . . . . . . . . . . . . . .21 5.6 Additional programmes . . . . . . . . . . . . . . .21 5.7 Special programmes . . . . . . . . . . . . . . . . .22
5.8 Temperature selection . . . . . . . . . . . . . . . .23 5.9 Spin speed selection . . . . . . . . . . . . . . . . .23 5.10 Programme and consumption table . . . . .24 5.11 Auxiliary function selection. . . . . . . . . . . .25 5.12 Time display . . . . . . . . . . . . . . . . . . . . . .26 5.13 Starting the programme. . . . . . . . . . . . . .27 5.14 Progress of programme. . . . . . . . . . . . . .27 5.15 Loading door lock . . . . . . . . . . . . . . . . . .27
5.16 Changing the selections after programme has started . . . . . . . . . . . . . . . . . . . . . . .27
5.17 Child Lock. . . . . . . . . . . . . . . . . . . . . . . .28 5.18 Cancelling the programme. . . . . . . . . . . .28 5.19 Machine is in Rinse Hold mode . . . . . . . .28 5.20 End of programme . . . . . . . . . . . . . . . . . 28
6 Quick User Guide |
29 |
6.1 Preparing the machine . . . . . . . . . . . . . . . 29 6.2 Programme selection. . . . . . . . . . . . . . . . .29 6.3 Auxiliary function selection. . . . . . . . . . . . .29 6.4 Starting the programme. . . . . . . . . . . . . . .29 6.5 End of programme. . . . . . . . . . . . . . . . . . .29 6.6 Cancelling the programme. . . . . . . . . . . . .29 6.7 Child Lock. . . . . . . . . . . . . . . . . . . . . . . . .29
7 Maintenance and cleaning |
30 |
7.1 Cleaning the detergent drawer . . . . . . . . . .30 7.2 Cleaning the loading door and the drum . . .30 7.3 Cleaning the body and control panel. . . . . .31 7.4 Cleaning the water intake filters . . . . . . . . .31
7.5 Draining remaining water and cleaning the pump filter . . . . . . . . . . . . . . . . . . . . . . .31
8 |
Troubleshooting |
33 |
|
|
|
9 |
Guarantee |
38 |
|
|
|
10 Service |
39 |
|
|
|
|
3 / 44 EN
1 Important instructions for safety and environment
This section contains safety instructions that will help protect from risk of personal injury or property damage. Failure to follow these instructions shall void any warranty.
1.1 General safety
•This product can be used by children at and above 8 years old and by persons whose physical, sensory or mental capabilities were not fully developed or who lack experience and knowledge provided that they are supervised or trained on the safe usage of the product and the risks it brings out. Children must not play with the product. Cleaning and maintenance works should not be performed by children unless they are supervised by someone.
•Never place the product on a carpet-covered floor. Otherwise, lack of airflow beneath the machine will cause electrical parts to overheat. This will cause problems with your product.
•If the product has a failure, it should not be operated unless it is repaired by the Authorized Service Agent. There is the risk of electric shock!
•This product is designed to resume operating in the event of powering on after a power interruption. If you wish to cancel the programme, see "Cancelling the programme" section.
•Connect the product to a grounded outlet protected by a 16 A fuse. Do not neglect to have the grounding installation made by a qualified electrician. Our company shall not be liable for any damages that will arise when the product is used without grounding in accordance with the local regulations.
•The water supply and draining hoses must be securely fastened and remain undamaged. Otherwise, there is the risk of water leakage.
•Never open the loading door or remove the filter while there is still water in the drum. Otherwise, risk of flooding and injury from hot water will occur.
•Do not force open the locked loading door. The loading door will be ready to open just a few minutes after the washing cycle comes to an end. In case of forcing the loading door to open, the door and the lock mechanism may get damaged.
•Unplug the product when not in use.
•Never wash the product by spreading or pouring water onto it! There is the risk of electric shock!
•Never touch the plug with wet hands! Never unplug by pulling on the cable, always pull out by grabbing the plug.
•Use detergents, softeners and supplements suitable for automatic washing machines only.
•Follow the instructions on the textile tags and on the detergent package.
•The product must be unplugged during installation, maintenance, cleaning and repairing procedures.
•Always have the installation and repairing procedures carried out by the Authorized Service Agent. Manufacturer shall not be held liable for damages that may arise from procedures carried out by unauthorized persons.
•If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similary qualified persons in order to avoid a hazard.
•If the power cable is damaged, it must be replaced by the manufacturer, after sales service or a similarly qualified person (preferably an electrician) or someone designated by the importer in order to avoid possible risks.
1.2 Intended use
•This product has been designed for domestic use. It is not suitable for commercial use and it must not be used out of its intended use.
•The product must only be used for washing and rinsing of laundry that are marked accordingly.
•The manufacturer waives any responsibility arisen from incorrect usage or transportation.
•The service life of your product is 10 years.
During this period, original spare parts will be available to operate the appliance properly.
4 / 44 EN
Important instructions for safety and environment
1.3 Children's safety
•Packaging materials are dangerous to children.
Keep packaging materials in a safe place away from reach of the children.
•Electrical products are dangerous for the children. Keep children away from the product when it is in use. Do not let them to tamper with the product. Use child lock to prevent children from intervening with the product.
•Do not forget to close the loading door when leaving the room where the product is located.
•Store all detergents and additives in a safe place away from the reach of the children by closing the cover of the detergent container or sealing the detergent package.
1.4 Package information
Packaging materials of the product are manufactured from recyclable materials in accordance with our National Environment Regulations.
Do not dispose of the packaging materials together with the domestic or other wastes. Take them to the packaging material collection points designated by the local authorities.
1.6 Compliance with WEE Directive
This appliance’s packaging material is
recyclable. Help recycle it and protect the environment by dropping it off in the municipal receptacles provided for
this purpose. Your appliance also contains a great amount of recyclable
material. It is marked with this label to indicate the used appliances that should not be mixed with other waste. This way, the appliance recycling organised by your manufacturer will be done under the best possible conditions, in compliance with European Directive 2002/96/EC on Waste Electrical and Electronic Equipment. Contact your town hall or your retailer for the used appliance collection points closest to your home. We thank you doing your part to protect the environment.
1.5 Disposing of the waste product
This product has been manufactured with high quality parts and materials which can be reused and are suitable for recycling.
Therefore, do not dispose the product with normal domestic waste at the end of its service life. Take it to a collection point for the recycling of electrical and electronic equipment. Please consult your local authorities to learn the nearest collection point. Help protect the environment and natural resources by recycling used products. For children's safety, cut the power cable and break the locking mechanism of the loading door so that it will be non-functional before disposing of the product.
5 / 44 EN
2 Your washing machine
2.1 Overview
8 |
1 |
|
2 |
|
3 |
7 |
|
6 |
|
4
5
1- Power cable |
|
5- Adjustable feet |
2- Top panel |
|
6- Loading door |
3- Control panel |
|
7- Detergent drawer |
4- Filter cap |
|
8- Drain hose |
6 / 44 EN
Your washing machine |
|
|
|
2.2 Package Contents |
|
|
|
3 |
4 |
|
|
2 |
|
|
|
1 |
|
|
|
|
a |
b |
c |
|
|
6 |
|
|
|
7 |
|
|
5 |
|
|
1- Power cable
2- Drain hose
3- Transportation safety bolts *
4- Mains water inlet hose (One of the following filter types is used for the mains hose connection.) a- Electronical water shut-off
a- Mechanical water shut-off c- Standard
5- Liquid detergent container**
6- User Manual
7- Blind plug***
*Number of transportation safety bolts may change depending on the model of your machine.
**This may be supplied with the machine depending on the model of your machine.
***This is supplied if your machine is equipped with double water inlet.
7 / 44 EN
Your washing machine
2.3 Technical specifications
Models (EN) |
ECO WMB81445LW |
Maximum dry laundry capacity (kg) |
8 |
|
|
Height (cm) |
84 |
|
|
Width (cm) |
60 |
|
|
Depth (cm) |
59 |
|
|
Net weight (±4 kg.) |
74 |
|
|
Electrical input (V/Hz) |
230 V / 50Hz |
|
|
Total current (A) |
10 |
|
|
Total power (W) |
2200 |
Spin speed (rpm max.) |
1400 |
Stand-by mode power (W) |
1.40 |
|
|
Off-mode power (W) |
0.20 |
|
|
Main model code |
918 |
|
|
Single Water inlet / Double Water inlet |
• / - |
• Available
CTechnical specifications may be changed without prior notice to improve the quality of the product.
CFigures in this manual are schematic and may not match the product exactly.
CValues stated on the product labels or in the documentation accompanying it are obtained in laboratory conditions in accordance with the relevant standards. Depending on operational and environmental conditions of the product, these values may vary.
8 / 44 EN
3 Installation
Refer to the nearest Authorised Service Agent for installation of the product. To make the product ready for use, review the information in the user manual and make sure that the electricity, tap water supply and water drainage systems are appropriate before calling the Authorized Service Agent. If they are not, call a qualified technician and plumber to have any necessary arrangements carried out.
CPreparation of the location and electrical, tap water and waste water installations at the place of installation is under customer's responsibility.
B Installation and electrical connections of the product must be carried out by the Authorized Service Agent. Manufacturer shall not be held liable for damages that may arise from procedures carried out by unauthorized persons.
A WARNING: Prior to installation, visually check if the product has any defects on it. If so, do not have it installed. Damaged products cause risks for your safety.
CMake sure that the water inlet and discharge hoses as well as the power cable are not folded, pinched or crushed while pushing the product into its place after installation or cleaning procedures.
3.1 Appropriate installation location
•Place the machine on a rigid floor. Do not place it on a long pile rug or similar surfaces.
•Total weight of the washing machine and the dryer -with full loadwhen they are placed on top of each other reaches to approx. 180
kilograms. Place the product on a solid and flat floor that has sufficient load carrying capacity!
•Do not place the product on the power cable.
•Do not install the product at places where temperature may fall below 0ºC.
•Place the product at least 1 cm away from the edges of other furniture.
3.2 Removing packaging reinforcement
Tilt the machine backwards to remove the packaging reinforcement. Remove the packaging reinforcement by pulling the ribbon.
3.3 Removing the transportation locks
A WARNING: Do not remove the transportation locks before taking out the packaging reinforcement.
A WARNING: Remove the transportation safety bolts before operating the washing machine! Otherwise, the product will be damaged.
1.Loosen all the bolts with a suitable spanner until they rotate freely (C).
2.Remove transportation safety bolts by turning them gently.
9 / 44 EN
Installation
3.Attach the plastic covers supplied in the User Manual bag into the holes on the rear panel. (P)
CKeep the transportation safety bolts in a safe place to reuse when the washing
machine needs to be moved again in the future.
CNever move the product without the transportation safety bolts properly fixed in place!
3.4 Connecting water supply
CThe water supply pressure required to run the product is between 1 to 10 bars (0.1 – 10 MPa). It is necessary to have 10 – 80 liters of water flowing from the fully open tap in one minute to have your machine run smoothly. Attach a pressure reducing valve if water pressure is higher.
CIf you are going to use the double waterinlet product as a single (cold) water-inlet unit, you must install the supplied stopper to the hot water valve before operating the product. (Applies for the products supplied with a blind stopper group.)
AWARNING: Models with a single water inlet should not be connected to the hot water tap. In such a case the laundry will get damaged or the product will switch to protection mode and will not operate.
AWARNING: Do not use old or used water inlet hoses on the new product. It may cause stains on your laundry.
1.Connect the special hoses supplied with the product to the water inlets on the product. Red hose (left) (max. 90 ºC) is for hot water inlet, blue hose (right) (max. 25 ºC) is for cold water inlet.
AWARNING: Ensure that the cold and hot water connections are made correctly when installing the product. Otherwise, your laundry will come out hot at the end of the washing process and wear out.
2.Tighten all hose nuts by hand. Never use a tool when tightening the nuts.
3.Open the taps completely after making the hose connection to check for water leaks at the connection points. If any leaks occur, turn off the tap and remove the nut. Retighten the nut carefully after checking the seal. To prevent water leakages and damages caused by them, keep the taps closed when the machine is not in use.
10 / 44 EN
Installation
3.5 Connecting to the drain
•The end of the drain hose must be directly connected to the wastewater drain or to the washbasin.
A WARNING: Your house will be flooded if the hose comes out of its housing during water discharge. Moreover, there is risk of scalding due to high washing temperatures! To prevent such situations and to ensure smooth water intake and discharge of the machine, fix the end
of the discharge hose tightly so that it cannot come out.
•The hose should be attached to a height of at least 40 cm, and 100 cm at most.
•In case the hose is elevated after laying it on the floor level or close to the ground (less than 40 cm above the ground), water discharge becomes more difficult and the laundry may come out excessively wet. Therefore, follow the heights described in the figure.
•To prevent flowing of dirty water back into the machine and to allow for easy discharge, do not immerse the hose end into the dirty water or do not drive it in the drain more than 15 cm. If it is too long, cut it short.
•The end of the hose should not be bent, it should not be stepped on and the hose must not be pinched between the drain and the machine.
•If the length of the hose is too short, use it by adding an original extension hose. Length of the hose may not be longer than 3.2 m. To avoid water leak failures, the connection between
the extension hose and the drain hose of the product must be fitted well with an appropriate clamp as not to come off and leak.
3.6 Adjusting the feet
A WARNING: In order to ensure that the product operates more silently and vibration-free, it must stand level and balanced on its feet. Balance the
machine by adjusting the feet. Otherwise, the product may move from its place and cause crushing and vibration problems.
1.Loosen the lock nuts on the feet by hand.
2.Adjust the feet until the product stands level and balanced.
3.Tighten all lock nuts again by hand.
11 / 44 EN
Installation
A WARNING: Do not use any tools to loosen the lock nuts. Otherwise, they will get damaged.
3.7 Electrical connection
Connect the product to a grounded outlet protected by a 13 A fuse. Our company shall not be liable for any damages that will arise when the product is used without grounding in accordance with the local regulations.
•Connection must comply with national regulations.
•Power cable plug must be within easy reach after installation.
•If the current value of the fuse or breaker in the house is less than 13 Amps, have a qualified electrician install a 13 Amp fuse.
•The voltage specified in the "Technical specifications" section must be equal to your mains voltage.
•Do not make connections via extension cables or multi-plugs.
B Damaged power cables must be replaced by the Authorized Service Agents.
Electrical requirements
Before you insert the plug into the wall socket make sure that the voltage and the frequency shown in the rating label corresponds to your electricity supply.
We recommend that this appliance be connected to the mains supply via a suitable switched and fused socket in a readily accessible position. Should the mains lead of the appliance become damaged or need replacing at any time, it must be replaced by a special purpose made mains lead which can only be obtained from a Authorised Service Agent.
B This appliance must be earthed
If the fitted moulded plug is not suitable for your socket, then the plug should be cut off and an appropriate plug fitted.
Destroy the old plug, which is cut off as a plug with a bared cord could cause a shock hazard if inserted into a socket elsewhere in the house. The moulded plug on this appliance incorporates a 13A fuse. Should the fuse need to be replaced an ASTA approved BS1362 fuse of the same rating must be used. Do not forget to refit the fuse cover. In the event of losing the fuse cover, the plug must not be used until a replacement fuse cover has been fitted. Colour of the replacement fuse cover must be the same colour as that visible on the pin face of the plug. Fuse covers are available from any good electrical store.
Important
Fitting a different plug
As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals on your plug, proceed as follows:
1Connect the green - yellow or green (earth) wire to the terminal in the plug marked ‘E’ or with the symbol f or coloured green and yellow or green.
2Connect the blue (neutral) wire to the terminal in the plug marked ‘N’ or coloured black.
3Connect the brown (live) wire to the terminal in the plug marked ‘L’ or coloured red.
With the alternative plugs a 13A fuse must be fitted either in the plug or adaptor or in the main fuse box. If in doubt contact a qualified electrician.
12 / 44 EN
Installation
Transportation of the product
1. Unplug the product before transporting it.
2. Remove water drain and water supply connections.
3. Drain all water that has remained in the product. See 7.5
4. Install transportation safety bolts in the reverse
order of removal procedure; see 3.3.
C
A WARNING: Packaging materials are dangerous to children. Keep packaging materials in a safe place away from reach of the children.
13 / 44 EN
4 Preparation
4.1 Sorting the laundry
•Sort laundry according to type of fabric, colour, and degree of soiling and allowable water temperature.
•Always obey the instructions given on the garment tags.
|
|
|
|
LAUNDRY WASH SYMBOLS |
|
|
|
|
||||
|
Machine |
Normal wash |
|
|
|
|
|
|
|
|
Not washable |
|
|
Wash |
|
|
|
SensitiveDelicate wash |
|
Hand wash |
|
|
|||
|
Symbols |
|
|
No Iron |
|
|
No Spin |
|||||
|
|
|
|
|
|
|||||||
WASH |
Water |
Maximum |
950C |
700C |
600C |
500C |
400C |
300C |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Temperatures |
Symbol(s) |
••• |
••• |
•• |
••• |
•• |
• |
|
|
|
|
|
••• |
•• |
•• |
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|||
|
Drying |
Suitable for |
No Iron |
Sensitive / |
Do not dry |
Do not dry |
Do not dry- |
|||||
|
Symbols |
|||||||||||
|
dryer |
|
||||||||||
|
|
|
|
|
Delicate dry |
with dryer |
|
|
clean |
|||
|
|
|
|
|
|
|
|
|||||
DRYING |
|
|
|
|
|
|
|
|
|
|
|
|
|
Drying |
At any temperature |
At high temperature |
|
At low temperature |
Without heating |
|
|
|
Hang wet to dry |
Lay in shadow to dry |
Dry-cleanable |
|
Settings |
At medium temperature |
|
Hang to dry |
|
|||||||
|
|
|
Lay to dry |
|||||||||
|
Iron - |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Iron at high |
Iron at medium |
Iron at low |
|
|
|
|||
IRON |
Dry or Steam |
|
|
temperature |
temperature |
temperature |
|
Do not iron |
Iron without steam |
|||
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|||
|
Maximum temperature |
|
200 0C |
150 0C |
|
110 0C |
|
|||||
|
|
|
|
|
|
Bleach (sodium |
Bleach is not |
|
Only bleaches without |
|||
|
All bleaches are allowed |
|
hypochlorite) |
|
||||||||
|
|
allowed |
|
chlorine are allowed |
||||||||
BLEACH |
|
|
|
|
|
can be used |
|
|||||
|
|
|
|
|
|
|
|
|
|
|||
14 / 44 EN |
|
|
|
|
|
|
|
|
|
|
|
|