CL84100
User’s manual
CL84100/CL84200/
CL84250/CL84300
DECT 6.0 corded/cordless
telephone/answering system
with caller ID/call waiting
Congratulations
on your purchase of this AT&T product. Before using this AT&T product,
please read the Important safety information on pages 85-86 of this
manual. Please thoroughly read this user’s manual for all the feature
operations and troubleshooting information necessary to install and operate
your new AT&T product. You can also visit our website at
www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial
1 (866) 288-4268.
Model #: CL84100 (one handset)
CL84200 (two handsets)
CL84250 (two handsets)
CL84300 (three handsets)
Type: DECT 6.0 corded/cordless telephone/answering system with
caller ID/call waiting
Serial #:
Purchase date:
Place of purchase:
Both the model and serial numbers of your AT&T product can be found on
the bottom of the telephone base.
Save your sales receipt and original packaging in case it is necessary to
return your telephone for warranty service.
T
Compatible with
Hearing Aid T-Coil
TIA-1083
Telephones identified with this logo have reduced noise and interference
when used with most T-coil equipped hearing aids and cochlear implants. The
TIA-1083 Compliant Logo is a trademark of the Telecommunications Industry
Association. Used under license.
Clearspeak
TM
is a trademark of Advanced American Telephones.
© 2010 Advanced American Telephones. All Rights Reserved. AT&T and
the AT&T logo are trademarks of AT&T Intellectual Property licensed to
Advanced American Telephones, San Antonio, TX 78219. Printed in China.
The ENERGY STAR® program (www.energystar.gov)
recognizes and encourages the use of products that
save energy and help protect our environment. We
are proud to supply this product with an ENERGY
STAR® qualified power adapter meeting the latest
energy efficiency guidelines.
Parts checklist
Your telephone package contains the following items. Save your sales receipt
and original packaging in the event warranty service is necessary.
Battery for cordless handset
(One for CL84100)
(Two for CL84200
and CL84250)
(Three for CL84300)
Cordless handset
(One for CL84100)
(Two for CL84200
and CL84250)
(Three for CL84300)
Charger for cordless
handset with power
adapter installed
(One for CL84100)
(Two for CL84200
and CL84250)
(Three for CL84300)
Battery compartment cover
(One for CL84100)
(Two for CL84200
and CL84250)
(Three for CL84300)
User’s manual Quick start guide Telephone base
Telephone line cord Power adapter for
telephone base
Handset with
coiled cord
User’s manual
CL84100/CL84200/
CL84250/CL84300
DECT 6.0 corded/cordless
telephone/answering system
with caller ID/call waiting
Quick start guide
CL84100/CL84200/
CL84250/CL84300
DECT 6.0 corded/cordless
telephone/answering system
with caller ID/call waiting
User’s manual
CL84100/CL84200/
CL84250/CL84300
DECT 6.0 corded/cordless
telephone/answering system
with caller ID/call waiting
Table of contents
Getting started
Quick reference guide - handset ........1
Quick reference guide -
telephone base ......................................3
Installation ..................................................... 4
Telephone base installation .................. 5
Charger installation ................................... 6
Battery installation and charging ....... 7
Installation options .................................... 9
Tabletop to wall
mount installation .............................9
Wall mount to
tabletop installation ...................... 11
Telephone settings
Handset settings ...................................... 13
Menu settings ...................................... 13
Ringer volume ..................................... 13
Ringer tone ........................................... 13
LCD Language ..................................... 14
Voicemail (visual message
waiting) indicator ............................ 14
Clear voicemail indication ............. 14
Key tone ................................................. 15
Set date/time ...................................... 15
Use caller ID to automatically
set date and time ........................... 16
Home area code ................................. 17
Dial mode .............................................. 17
Website ................................................... 18
Answering system settings
(handset only) ..................................... 19
Announcement ................................... 19
Answer on/off ..................................... 20
Call screening ...................................... 21
Number of rings ................................. 21
Remote access code ........................ 22
Message alert tone ........................... 23
Telephone base settings ...................... 24
Menu settings ...................................... 24
Ringer volume ..................................... 24
Ringer tone ........................................... 25
LCD language ...................................... 25
Voicemail (visual message
waiting) indicator ............................ 25
Clear voicemail indication ............. 26
Key tone ................................................. 26
Set date/time ...................................... 27
Use caller ID to automatically
set date and time ........................... 28
Home area code ................................. 28
Dial mode .............................................. 29
Website ................................................... 29
Making, answering, and ending calls ... 30
Making a call ........................................ 30
On hook dialing (predialing) ........ 30
Answering a call ................................ 30
Temporary ringer silencing ........... 31
Ending a call ........................................ 31
Auto off .................................................. 31
ClearspeakTM dial-in-base
speakerphone ................................... 31
Cordless handset speakerphone ... 31
Redial............................................................. 32
Last number redial ............................ 32
Exiting the menu ................................ 33
Handset operation .................................. 34
Equalizer ................................................. 34
Volume control ................................... 35
Call waiting ........................................... 35
Mute ......................................................... 35
Options while on calls .......................... 35
Chain dialing ........................................ 36
Temporary tone dialing .................. 37
Multiple handset use
Multiple handset use ............................. 38
Handset locator .................................. 38
Join a call in progress ..................... 38
Intercom ....................................................... 39
Answer an incoming call during
an intercom call .............................. 40
Call transfer using intercom .............. 41
Directory
About the directory ................................ 43
Shared directory ................................. 43
Capacity .................................................. 43
Create directory entries ....................... 44
To create a new directory entry ... 44
To add a predialed telephone
number to the directory .............. 47
Review directory ...................................... 48
To review directory entries ........... 48
Search directory ....................................... 49
To search by name ........................... 49
To dial, delete or edit entries ............ 50
Display dial ........................................... 50
To delete an entry ............................. 50
To edit an entry .................................. 50
Caller ID
About caller ID ......................................... 52
Information about caller ID with
call waiting......................................... 52
Caller ID history ....................................... 53
How the caller ID history
(call log) works ................................ 53
Missed (new) calls indicator ......... 53
Caller ID operation ................................. 54
Memory match .................................... 54
To review the caller ID history .... 54
View dialing options ......................... 55
Dial a call log entry .......................... 56
Delete entries ...................................... 56
Save a call log entry to
the directory ...................................... 56
Reasons for missing
caller ID information ........................ 58
Answering system
About the answering system............. 59
Answering system and voicemail ...59
Answering system new
message indication ........................ 59
Turn the answering system on
or off at the telephone base .... 60
Message capacity .............................. 60
Voice prompts ..................................... 60
Call screening at the
telephone base ................................ 61
Call intercept ....................................... 61
Base ringer ........................................... 61
Temporarily turning off the
message alert tone ........................ 61
Message playback ................................... 62
Options during playback ................ 62
To delete all old messages ........... 63
Recording and playing memos ......... 64
To record a memo ............................. 64
To play back a memo ...................... 64
Base message counter displays ....... 65
Remote access .......................................... 66
Appendix
Expansion handset .................................. 68
Adding and registering handsets .... 69
To register a handset to your
telephone base ................................ 69
Deregistering a handset....................... 70
To deregister all handsets ............. 70
Alert tones and lights ........................... 71
Handset screen icons ...................... 71
Handset alert tones .......................... 71
Telephone base icons ...................... 71
Telephone base tones ..................... 72
Lights ....................................................... 72
Handset and telephone base
display screen messages ............... 73
Troubleshooting ....................................... 76
Maintenance............................................... 84
Important safety information ............ 85
Safety information ............................. 85
Especially about
cordless telephones ...................... 86
Precautions for users of
implanted cardiac pacemakers ... 86
Pacemaker patients .......................... 86
Especially about telephone
answering systems ......................... 86
FCC Part 68 and ACTA.......................... 87
FCC Part 15 ................................................ 88
Limited warranty ...................................... 89
Technical specifications ....................... 91
DECT 6.0 digital technology ......... 91
Telephone operating range .......... 91
Redefining long range coverage
and clarity .......................................... 91
Index
Index .............................................................. 92
Remote access wallet card ................ 94
CHARGE indicator
On when the handset
is charging.
qCID/-VOLUME
Press qCID to show caller ID
history (page 54).
Press to scroll down while
in menus.
While entering names or
numbers, press to move the
cursor to the left.
Press to decrease the listening
volume when on a call.
PHONE/FLASH
Press to make or answer a call.
During a call, press to answer
an incoming call when you
receive a call waiting alert
(page 35).
1
While reviewing a call log
entry, press repeatedly to
add or remove 1 in front of
the telephone number before
dialing or saving it in the
directory (page 55).
MENU/SELECT
Press to show the menu.
While in the menu, press to
select an item or save an
entry or setting.
pDIR/VOLUME+
Press pDIR to show
directory entries (page 48).
Press to scroll up while
in menus.
While entering names or
numbers, press to move the
cursor to the right.
Press to increase the
listening volume when on
a call.
OFF/CLEAR
During a call, press to hang up.
While in a menu, press to
cancel an operation, back up
to the previous menu, or exit
the menu display.
Press and hold while the
telephone is not in use to
erase the missed calls indicator.
#
Press repeatedly to display
other dialing options when
reviewing a call log entry
(page 55).
REDIAL/PAUSE
Press repeatedly to view
the last 20 numbers dialed
(page 32).
While entering numbers,
press and hold to insert a
dialing pause (page 44).
INT
Press to begin an intercom
conversation (page 39) or to
transfer a call (page 41).
MUTE/DELETE
During a call, press to mute the microphone (page 35).
While reviewing the caller ID history, the directory or
the redial memory, press to delete an individual entry
(page 56, page 50 and page 32 respectively).
While predialing, press to delete digits (page 30).
/SPEAKER
Press to switch between
speakerphone and handset
(page 31).
Quick reference guide - handset
Getting started
TONE
If you have pulse dialing, press
during a call to switch to tone
dialing temporarily (page 37).
1
2
Main menu
The > symbol highlights
a menu item.
>Play messages
Answering sys
Main menu
Play messages (page 62)
Answering sys (page 59)
Directory (page 43)
Call log (page 54)
Ringers (page 13)
Settings (page 14)
Website (page 18)
Using menus
Press MENU/SELECT to show the first menu
item, Play messages.
Press qCID or pDIR to scroll through
menu items.
Press MENU/SELECT to confirm or save
changes to a highlighted menu item.
Press OFF/CLEAR to cancel an operation,
back up to the previous menu, or exit the
menu display.
Quick reference guide - handset
Getting started
EQ
During an outside call, intercom call,
message or announcement playback,
press to change the quality of the audio
to best suit your hearing (page 34).
3
Quick reference guide - telephone base
Getting started
IN USE indicator
On when the telephone is in
use, or when the answering
system is answering an
incoming call.
On when a handset is
being registered.
Flashes when there is an
incoming call or when a
handset is being deregistered.
Flashes when another
telephone is in use on the
same line.
LOCATOR
While the phone is idle, press
to page all handsets (page 38).
FLASH
During a call, press to
answer an incoming call
when you receive a call
waiting alert (page 35).
CANCEL
While using menus, press to
cancel an operation, back
up to the previous menu or
exit the menu display.
q/CID
Press when the phone
is idle to display the call
history (page 54).
Press to scroll down while
in menus and lists.
While entering numbers or
letters, press to move the
cursor to the left.
MENU/SELECT
Press to show the menu. While
in the menu, press to confirm
or save an entry or setting.
p/DIR
Press when the phone is idle to
display the directory (page 48).
Press to scroll up while in menus
and lists.
While entering or modifying
names, press to move the cursor
to the right.
INTERCOM
While the phone is idle, press
to initiate an intercom call
(page 39).
/ANSWER ON
Press to turn the built-in answering system
on or off (page 60).
/PLAY/STOP
Press to start or stop message playback
(page 62).
Flashes when there are new messages or
memos in the answering system.
X/DELETE
Press to delete the message currently
playing. When in idle mode, press twice to
delete all old messages (page 63).
/REPEAT
Press to repeat the message; press twice
to play the previous message (page 63).
/SKIP
Press to skip the message (page 62).
pq/VOLUME
During message playback, press to adjust
the listening volume (page 62).
While in idle mode, press to adjust the
base ringer volume (page 61).
REDIAL/PAUSE
Press to access the last 20 numbers dialed
(page 33).
While predialing or entering numbers into
your directory, press and hold to insert a
dialing pause (page 45).
MUTE
Press to turn off the microphone; press again
to resume your conversation (page 35).
SPEAKER
Press to switch between speakerphone and
corded handset (page 30).
TONE
If you have pulse dialing, press
during a call to switch to tone
dialing temporarily (page 37).
4
See pages 7-8
for easy instructions.
You must install and
charge the battery before
using the telephone.
STOP!
Installation
Install the telephone base close to a telephone jack and a power outlet not
controlled by a wall switch. The telephone base can be placed on a flat surface
or vertically mounted on the wall (see page 9). For optimum range and better
reception, place the telephone base in a central and open location.
If you subscribe to high-speed Internet service (DSL - digital subscriber line)
through your telephone line, you must install a DSL filter between the
telephone line cord and the telephone wall jack (see the following page). The
filter prevents noise and caller ID problems caused by DSL interference. Please
contact your DSL service provider for more information about DSL filters.
Your product may be shipped with a protective sticker covering the handset
or telephone base display - remove it before use.
For customer service or product information, visit our website at
www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial
1 (866) 288-4268.
Avoid placing the telephone base too close to:
Communication devices such as television sets, VCRs, or other
cordless telephones.
Excessive heat sources.
Noise sources such as a window with traffic outside, motors, microwave
ovens, refrigerators, or fluorescent lighting.
Excessive dust sources such as a workshop or garage.
Excessive moisture.
Extremely low temperature.
Mechanical vibration or shock such as on top of the washing machine
or workbench.
•
•
•
•
•
•
•
Getting started
5
Getting started
IMPORTANT INFORMATION
1. Use only the power adapter(s) supplied with this product. To order a replacement
power adapter, visit our website at www.telephones.att.com or call
1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.
2. The power adapters are intended to be correctly oriented in a vertical or floor
mount position. The prongs are not designed to hold the plug in place if it is
plugged into a ceiling, under-the-table or cabinet outlet.
PRESS TO RELEASE
PRESS TO RELEASE
Telephone base installation
Install the telephone base as shown below.
The telephone base is ready for tabletop use. If you want to change to wall
mounting, see page 9 for details.
Plug the small end
of the AC power
adapter into the
power jack on
the bottom of the
telephone base.
•
Plug one end of
the telephone
line cord into the
telephone jack on
the bottom of the
telephone base.
•
Place the cords into
the channels.
•
Plug the other
end of the
telephone line
cord into a
telephone jack or
a DSL filter.
•
Plug the other
end of the coiled
handset cord into
the jack at the left
of the telephone
base.
•
Raise the
antenna.
•
Plug the large end of
the AC power adapter
into a power outlet
not controlled by a
wall switch.
•
If you have DSL high-speed
Internet service, a DSL filter
(not included) is required.
NOTE: This telephone provides minimal functionality during a power outage. When AC
power is not available, many telephone features do not function. The telephone uses power
from the telephone line to enable you to make and answer calls using only the corded
handset and dial pad keys. However, when more than one telephone on the same line is
being used simultaneously, there might not be sufficient power to operate your telephone in
the event of a power failure.
6
Getting started
Charger installation
Install the charger as shown below.
Plug the power adapter into an electrical outlet
not controlled by a wall switch.
IMPORTANT INFORMATION
1. Use only the power adapter(s) supplied with this product. To order a replacement
power adapter, visit our website at www.telephones.att.com or call
1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.
2. The power adapters are intended to be correctly oriented in a vertical or floor
mount position. The prongs are not designed to hold the plug in place if it is
plugged into a ceiling, under-the-table or cabinet outlet.
7
Battery indicators Battery status Action
The screen is blank or
shows Place in charger and
(flashing).
Battery has no or very
little charge. The handset
cannot be used.
Charge without interruption until
the screen shows Low battery or
HANDSET X (at least 30 minutes).
The screen shows
Low battery and (flashing).
Battery has enough charge
to be used for a short time.
Charge without interruption until
the screen shows HANDSET X
(at least 30 minutes).
The screen shows
HANDSET X.
Battery is charged. To keep the battery charged,
place it in the handset charger
when not in use.
Battery installation and charging
Install the cordless handset battery as shown below. Once you have installed
the battery, the screen indicates the battery status (see table below). If
necessary, place the handset in the handset charger to charge the battery.
For best performance, keep the handset in the handset charger when not in
use. The battery is fully charged after 16 hours of continuous charging. See
the table on page 91 for battery operating times.
If the screen shows Place in charger and flashes, you need to charge the
handset without interruption for at least 30 minutes to give the handset
enough charge to use the telephone for a short time. The following table
summarizes the battery charge indicators and actions to take.
Step 1
Plug the battery
connector securely
into the socket inside
the handset battery
compartment, matching
the color-coded label.
Insert the supplied
battery with the label
THIS SIDE UP facing up
as indicated.
Step 2
Align the cover flat
against the battery
compartment, then
slide it upwards until
it clicks into place.
NOTE: If you are on a phone call in low battery mode, you hear four short beeps
every minute.
Getting started
8
Battery installation and charging
Step 3
Charge the handset by placing it face forward in the
charger. The CHARGE light on the top of the handset is on
during charging.
IMPORTANT INFORMATION
1. Use only the supplied rechargeable battery or replacement battery (model BT166342).
To order, visit our website at www.telephones.att.com or call
1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.
2. If you do not use the handset for a long time, disconnect and remove the battery
to prevent possible leakage.
CHARGE light
Getting started
SET DATE
--/--/--
SET TIME
--:-- --
After you install your telephone or power returns following
a power outage, the handset will prompt you to set the date
and time. For instructions, see Set date/time on page 15. To
skip setting the date and time, press OFF/CLEAR.
9
Installation options
The telephone base comes with the mounting bracket set for tabletop use.
If you want to mount your telephone on a wall, swivel the mounting bracket
down so the telephone can connect with a standard dual-stud telephone wall
mounting plate. If you do not have this mounting plate, you can purchase
one from many hardware or consumer electronics retailers. You might need a
professional to install the mounting plate.
Tabletop to wall mount installation
To install the telephone base in the wall mount position, make sure that you
first unplug all cords connected to the telephone base.
1. Press in as the arrows indicate. The bracket will detach from the telephone
base. Swivel it down into wall mount position, making sure it clicks into place.
PRESS TO RELEASE
PRESS TO RELEASE
Table mount Wall mount
Side view
Getting started
10
Installation options
Getting started
3. Connect the telephone line cord
and power adapter cord to the jacks
on the bottom of the telephone
base. Bundle the telephone cord
and power adapter cord, and secure
them with twist ties. Plug the power
adapter and telephone line into the
wall outlets.
4. Place the bundled telephone
line cord and power adapter
cord into the cavity under the
telephone base as shown below.
Align the mounting studs on the
telephone outlet plate with the
mounting holes on the bracket.
2. Remove the handset tab from the telephone base. Rotate and replace it
to hold the corded handset securely in place when the telephone base is
mounted on the wall.
11
Installation options
Wall mount to tabletop installation
To change the telephone base from the wall mount position to tabletop position:
1. Remove the telephone base from the wall.
2. Untie the bundled telephone cord and power adapter cord. Make sure
that you unplug the power adapter and telephone line cord from the wall
outlets before you begin.
3. Push as indicated by arrows in the illustration until the bracket is released,
and then swivel it upward until it clicks into the tabletop position.
Table mount
Wall mount
Side view
Getting started
12
Installation options
4. Connect the telephone line cord and power adapter cord to the jacks on
the bottom of the telephone base. Plug the power adapter and telephone
line into the wall outlets.
PRESS TO RELEASE
PRESS TO RELEASE
5. Remove the handset tab from the telephone base. Rotate and replace for
tabletop use.
Getting started
13
Handset settings
Menu settings
You can use the handset menu to change settings. Refer to page 24 to
change the telephone base settings.
1. Press
MENU/SELECT when in idle mode (when the phone is
not in use) to enter the main menu.
2. Press
qCID or pDIR to scroll to the feature to be changed.
When scrolling through the menu, the > symbol indicates
the selected menu item.
3. Press
MENU/SELECT to confirm the highlighted item.
NOTE: Press OFF/CLEAR to cancel an operation, back up to the previous menu or exit
the menu display. Press and hold OFF/CLEAR to return to idle mode.
Ringer volume
You can set the ringer volume level (1-6) to one of six levels or turn the
ringer off. When the ringer is off, appears on the screen.
1. Press MENU/SELECT in idle mode to enter the main menu.
2. Use
qCID or pDIR to scroll to >Ringers.
3. Press
MENU/SELECT twice to select >Ringer volume.
4. Press
qCID or pDIR to sample each volume level.
5. Press MENU/SELECT to save your preference. There is a
confirmation tone and the screen returns to the main menu.
Press OFF/CLEAR to cancel.
NOTE: The handset ringer volume also determines the ringer volume for
intercom calls (page 39). If the ringer volume is set to off, that handset is
silenced for all incoming calls.
Ringer tone
You can choose one of 10 ringer tones.
1. Press
MENU/SELECT in idle mode to enter the main menu.
2. Use
qCID or pDIR to scroll to >Ringers, then press
MENU/SELECT.
3. Press
qCID or pDIR to scroll to >Ringer tone, then press
MENU/SELECT.
4. Press
qCID or pDIR to sample each ringer tone.
5.
Press MENU/SELECT to save your preference and return to
the main menu. Press OFF/CLEAR to cancel.
NOTE: If you turn off the ringer volume, you do not hear ringer tone samples.
>
Ringer volume
Ringer tone
RINGER VOLUME
RINGER TONE
>
Tone 1
>
Ringer tone
Ringer volume
Telephone settings
>
Ringers
Settings
>
Answering sys
Directory
14
Handset settings
LCD language
You can select the language used for all handset screen displays.
1. Press
MENU/SELECT in idle mode to enter the main menu.
2.
Use qCID or pDIR to scroll to >Settings.
3. Press
MENU/SELECT twice to select >LCD language.
4. Press
qCID or pDIR to highlight English, Français or
Español.
5. Press
MENU/SELECT to save your preference and return to
the main menu. Press OFF/CLEAR to cancel.
Voicemail (visual message waiting) indicator
If you subscribe to a voicemail service offered by your
telephone service provider, this feature provides a visual
indication on the handset screen when you have new
voicemail messages.
New voicemail and appear on the handset screen.
NOTES:
1. This feature does not indicate new messages recorded on your phone’s built-in answering system.
2. For more information about the difference between your answering system and voicemail,
see page 59.
Clear voicemail indication
Use this feature when the telephone indicates there is new voicemail but
there is none. For example, when you have accessed your voicemail while
away from home. This feature only turns off the displayed New voicemail
and ; it does not delete your voicemail messages. As long as you have
new voicemail messages, your telephone service provider continues to send
the signal to turn on the indicators.
To manually turn off the new voicemail indicators on
the handset:
1. Press
MENU/SELECT when in idle mode to enter the
main menu.
2. Use
qCID or pDIR to scroll to >Settings, then press
MENU/SELECT.
3.
Use qCID or pDIR to scroll to >Clr voicemail, then press
MENU/SELECT. The screen shows Turn off indicator?
4. Press MENU/SELECT again to turn the voicemail indication
off. There is a confirmation tone. Press OFF/CLEAR to cancel.
>
LCD language
Clr voicemail
LCD LANGUAGE
>
English
Telephone settings
Turn off
indicator?
>
Clr voicemail
Key tone
HANDSET 1
New voicemail
10:21
AM
2/11
15
Handset settings
NOTES:
1. Your telephone service provider voicemail might alert you to new messages with a stutter
(broken) dial tone. Contact your telephone service provider for more details.
2. For information about using your voicemail service, contact your telephone service provider
for assistance.
Key tone
The handset is set to beep with each key press. If you turn off the key tone,
there are no beeps when you press keys.
1. Press
MENU/SELECT in idle mode to enter the main menu.
2. Use
qCID or pDIR to scroll to >Settings, then press
MENU/SELECT.
3.
Use qCID or pDIR to scroll to >Key tone, then press
MENU/SELECT.
4. Press qCID or pDIR to highlight On or Off.
5. Press MENU/SELECT to save your preference and return to
the main menu. Press OFF/CLEAR to cancel.
Set date/time
The answering system announces the day and time of each message prior
to playing it. Before using the answering system, set the date and time as
follows. If you subscribe to caller ID service, the day, month and time are
set automatically with each incoming call. The year must be set so that the
day of the week can be calculated from the caller ID information. You can
turn off the date and time settings of the caller ID service and use your
own settings for each incoming call (see the Use caller ID to automatically
set date and time section on the following page).
After a power failure, handset registration or deregistration, the system reminds
you to set the date and time for backup before entering the idle mode.
Follow the steps below to set the month, day, year and time on the handset.
1. When the handset is in idle mode, press
MENU/SELECT to
enter the main menu.
2. Press
qCID or pDIR to scroll to >Settings, then press
MENU/SELECT.
3.
Press qCID or pDIR to scroll to >Set date/time.
4.
Press MENU/SELECT twice to select >Date & time.
5. Press qCID or pDIR to select the month then press
MENU/SELECT, or enter the number using the dial pad keys.
>
Date & time
CID time sync
Telephone settings
>Set
date/time
Home area code
>
Key tone
Set date/time
KEY TONE
>
On
16
Handset settings
6. Press qCID or pDIR to select the day then press
MENU/SELECT, or enter the number using the dial pad keys.
7. Press qCID or pDIR to select the year then press
MENU/SELECT, or enter the number using the dial pad keys,
then press MENU/SELECT to confirm.
8. Press qCID or pDIR to select the hour then press
MENU/SELECT, or enter the number using the dial pad keys.
9. Press qCID or pDIR to select the minute then press
MENU/SELECT, or enter the number using the dial pad keys.
10. Press qCID or pDIR to select AM or PM, then press
MENU/SELECT to confirm. There is a confirmation tone.
Press OFF/CLEAR to cancel.
NOTE: If the clock is not set when a message is recorded, the system announces, “Time and
day not set,” before it plays the message.
Use caller ID to automatically set date and time
You can choose if the date and time are automatically set by incoming
caller ID. The default setting is On.
1. When the handset is in idle mode, press
MENU/SELECT to
enter the main menu.
2. Press
qCID or pDIR to scroll to >Settings, then press
MENU/SELECT.
3.
Press qCID or pDIR to scroll to >Set date/time, then
press MENU/SELECT.
4.
Press qCID or pDIR to scroll to >CID time sync, then
press MENU/SELECT.
5. Press qCID or pDIR to select On or Off, then press
MENU/SELECT to confirm. There is a confirmation tone.
SET DATE
--/--/--
SET TIME
--:-- --
CID TIME SYNC
>
On
Date & time
>CID time sync
>
Settings
Website
Telephone settings
17
Handset settings
Home area code
If you dial seven digits to make a local call (no area code required), enter
your area code into the telephone as the home area code. When you receive
a call from within your home area code, the caller ID history only displays the
seven digits of the telephone number.
This feature makes it easy for you to place a call from the caller ID log. If you
dial 10 digits to make a local phone call, do not use this home area code
feature. If you do, you cannot place local calls from your caller ID log, as they
will have only seven digits.
To set the home area code on a cordless handset:
1. Press
MENU/SELECT in the idle mode to enter the main menu.
2.
Use qCID or pDIR to scroll to >Settings, then press
MENU/SELECT.
3.
Use qCID or pDIR to scroll to >Home area code, then
press MENU/SELECT.
4. Use the dial pad keys to enter a three-digit home area
code. Press MUTE/DELETE to delete a digit while entering,
or press and hold MUTE/DELETE to delete all digits.
5. Press
MENU/SELECT to save and return to the main menu.
There is a confirmation tone. Press OFF/CLEAR to cancel.
NOTE: If, in the future, your telephone service provider requires you to
dial 10 digits to make a local call (area code plus telephone number), you need to delete
your home area code and dial out locally from the call log. With the home area code
displayed, press and hold X/DELETE until the digits are deleted, and then press
MENU/SELECT. The home area code is now restored to its default setting of _ _ _(empty).
Dial mode
The dial mode is preset to tone dialing. If you have pulse (rotary) service, you
must change the dial mode to pulse dialing before using the telephone.
To set the dial mode on a cordless handset:
1. Press
MENU/SELECT in the idle mode to enter the main menu.
2.
Use qCID or pDIR to scroll to >Settings, then press
MENU/SELECT.
3.
Use qCID or pDIR to scroll to >Dial mode, then press
MENU/SELECT.
4.
Use qCID or pDIR to scroll to >Tone or >Pulse, then press
MENU/SELECT. There is a confirmation tone. Press
OFF/CLEAR to cancel.
>
Home area code
Dial mode
HOME AREA CODE
___
>Settings
Website
DIAL MODE
>Tone
Telephone settings
>
Dial mode
-End of list-
18
Handset settings
Website
Use this feature to view the AT&T website address.
1. Press
MENU/SELECT in idle mode to enter the main menu.
2. Use
qCID or pDIR to scroll to >Website, then press
MENU/SELECT.
3. P
ress OFF/CLEAR to cancel.
Telephone settings
>
Website
Settings
www.telephones.
att.com
19
Answering system settings (handset only)
Use the answering system menu of any system handset to set or change
the outgoing announcement, call screening, number of rings, remote access
and message alert tone settings.
1. When the handset is in idle mode, press
MENU/SELECT to
enter the main menu.
2. Press
qCID or pDIR to scroll to >Answering sys, then
press MENU/SELECT.
Announcement
Your outgoing announcement plays when calls are answered by the
answering system.
The telephone has a default outgoing announcement, “Hello. Please leave a
message after the tone.” You can use this announcement, or record your own
announcement.
You can record an announcement up to 90 seconds. The system does not
record any announcement shorter than two seconds.
To play your current outgoing announcement:
1. When the handset is in idle mode, press MENU/SELECT to
enter the main menu.
2. Press
qCID or pDIR to scroll to >Answering sys, then
press MENU/SELECT.
3. Press
MENU/SELECT again to select >Announcement. The
system announces, “To play, press 2. To record, press 7.”
4. Press 2 to play the current announcement.
To record a new outgoing announcement:
1. When the handset is in idle mode, press
MENU/SELECT to
enter the main menu.
2. Press
qCID or pDIR to scroll to >Answering sys, then
press MENU/SELECT.
3. Press MENU/SELECT again to select >Announcement. The
system announces, “To play, press 2. To record, press 7.”
4. Press 7 to record an announcement. The system announces,
“Record after the tone. Press 5 when you are done.”
5. Facing the handset, record your announcement and press 5
to end recording. Your recorded announcement plays.
To listen to the recorded announcement again, press 2 after
playback is completed.
>
Announcement
Delete all old
2-Play 3-Delete
5-Stop 7-Record
Record annc...
5-Stop
Play messages
>Answering sys
Play messages
>
Answering sys
Telephone settings
20
Answering system settings (handset only)
To delete your outgoing announcement:
1.
When the handset is in idle mode, press MENU/SELECT to enter the
main menu.
2. Press
qCID or pDIR to scroll to >Answering sys, then press
MENU/SELECT.
3. Press MENU/SELECT again to select >Announcement. The
system announces, “To play, press 2. To record, press 7.”
4. Press 3 to delete your recorded announcement.
When your announcement is deleted, the system answers calls with the
default announcement described on the previous page.
Answer on/off
Unless you change it, the answering system is on and ready to record
messages. You can turn the answering system off, but if you do so, the
answering system does not answer calls and record incoming messages.
To turn the answering system on or off from a cordless handset:
1. When the handset is in idle mode, press
MENU/SELECT to
enter the main menu.
2. Press
qCID or pDIR to scroll to >Answering sys, then
press MENU/SELECT.
3. Press qCID or pDIR to scroll to >Answer ON/OFF, then
press MENU/SELECT.
4. Press qCID or pDIR to highlight On or Off, then press
MENU/SELECT to confirm. You hear a confirmation tone. Press
OFF/CLEAR to cancel.
If the answering system is on, the handset screen shows
ANS ON.
NOTES:
If the answering system is off and there is an incoming call, the system answers after 10 rings and
announces, “Please enter your remote access code.” For more information about remote access
codes, see page 66.
If you change any answering system settings, the system automatically turns on and will answer
incoming calls.
1.
2.
>
Answer ON/OFF
Ans sys setup
ANSWER ON/OFF
>On
Play messages
>
Answering sys
Telephone settings
>
Announcement
Delete all old
21
Answering system settings (handset only)
Call screening
Use this feature to choose whether incoming messages can be heard over
the telephone base speaker when they are being recorded. If you turn call
screening on, you hear the incoming message. While monitoring an incoming
message, you can answer the call by pressing PHONE/FLASH or /SPEAKER
on the handset.
To change the setting:
1. When the handset is in idle mode, press
MENU/SELECT to
enter the main menu.
2. Press
qCID or pDIR to scroll to >Answering sys, then
press MENU/SELECT.
3. Press
qCID or pDIR to scroll to >Ans sys setup.
4.
Press MENU/SELECT twice to select >Call screening.
5. Press qCID or pDIR to choose On or Off.
6. Press
MENU/SELECT to confirm your setting and you hear a
confirmation tone. Press OFF/CLEAR to cancel.
NOTE: For more information on call screening, see page 61.
Number of rings
You can set the answering system to answer an incoming call after two, four,
or six rings. You can also select toll saver, which is explained below. Unless you
change it, the answering system answers an incoming call after four rings.
To set the number of rings:
1. When the handset is in idle mode, press
MENU/SELECT to enter the main
menu.
2. Press
qCID or pDIR to scroll to >Answering sys, then press MENU/SELECT.
3. Press
qCID or pDIR to scroll to >Ans sys setup, then press MENU/SELECT.
4.
Press qCID or pDIR to scroll to ># of rings, then press MENU/SELECT.
5. Press qCID or pDIR to scroll and choose among 2, 4, 6 or
Toll saver.
Toll saver - the answering system answers a call after
two rings if you have new messages, and after four
rings when there are no new messages. This feature
allows you to check for new messages and avoid
paying long distance charges when calling from out of
your local area.
•
>
# of rings
Remote code
# OF RINGS
>2
Telephone settings
>
Call screening
# of rings
>
Ans sys setup
-End of list-
CALL SCREENING
>On
Play messages
>
Answering sys
6. Press MENU/SELECT to confirm your setting and you hear a confirmation
tone. Press OFF/CLEAR to cancel.
NOTE: If you subscribe to voicemail service through your telephone service provider, see
Answering system and voicemail on page 59.
Remote access code
To access your answering system remotely from any touch-tone phone, you
need to enter a two-digit number (00-99). Unless you change it, the remote
access code is 19.
To change the remote access code:
1. When the handset is in idle mode, press
MENU/SELECT to
enter the main menu.
2. Press
qCID or pDIR to scroll to >Answering sys, then
press MENU/SELECT.
3. Press
qCID or pDIR to scroll to >Ans sys setup, then
press MENU/SELECT.
4.
Press qCID or pDIR to scroll to >Remote code, then
press MENU/SELECT.
5.
Use the dial pad to enter a two-digit number. Use
MUTE/DELETE to backspace and delete a digit.
6. Press MENU/SELECT to confirm your setting and you hear a
confirmation tone. Press OFF/CLEAR to cancel.
Answering system settings (handset only)
Telephone settings
>
Remote code
Msg alert tone
>
Ans sys setup
-End of list-
Play messages
>
Answering sys
REMOTE CODE
19
22
23
Answering system settings (handset only)
Message alert tone
When the message alert tone is set to ON, and there is at least one new
message, the telephone base beeps every 10 seconds. Unless you change it,
the message alert tone is set to off.
There is no audible alert at the handset.
To change the setting:
1. When the handset is in idle mode, press
MENU/SELECT to
enter the main menu.
2. Press
qCID or pDIR to scroll to >Answering sys, then
press MENU/SELECT.
3. Press
qCID or pDIR to scroll to >Ans sys setup, then
press MENU/SELECT.
4.
Press qCID or pDIR to scroll to >Msg alert tone, then
press MENU/SELECT.
5. Press
qCID or pDIR to choose On or Off.
6. Press
MENU/SELECT to confirm your setting and you hear a
confirmation tone. Press OFF/CLEAR to cancel.
NOTES:
1. The message alert tone beeps only if all the conditions below are met:
- Answering system is on.
- Message alert tone setting is on.
- There are new messages.
2. To temporarily turn off the message alert tone, see page 61.
>
Msg alert tone
-End of list-
MSG ALERT TONE
>On
>
Ans sys setup
-End of list-
Play messages
>
Answering sys
Telephone settings
24
Telephone base settings
Menu settings
You can use the base menu to change settings. Refer to page 13 to change
the handset settings.
1. Press
MENU/SELECT when in idle mode (when the
phone is not in use) to enter the main menu.
2. Press
q/CID or p/DIR to scroll to the feature to be
changed. When scrolling through the menu, the
> symbol indicates the selected menu item.
3. Press
MENU/SELECT to confirm.
NOTE: To cancel an operation, back up to the previous menu or exit the menu display,
press and hold CANCEL to return to idle mode.
Ringer volume
You can set the ringer volume level (1-6) to one of six
levels or turn the ringer off. When the ringer is off,
appears on the telephone base screen.
1. Press MENU/SELECT in idle mode to enter the
main menu.
2. Use
q/CID or p/DIR to scroll to >Ringers, then
press MENU/SELECT.
3.
Press MENU/SELECT again to select >Ringer volume.
4. Press
q/CID or p/DIR to sample each volume level.
5. Press MENU/SELECT to save your preference. There is
a confirmation tone and the screen returns to the main
menu. Press CANCEL to exit.
-OR-
Press pq/VOLUME on the telephone base in idle mode
to change the ringer volume.
NOTE: The telephone base ringer volume also determines the
ringer volume for intercom calls (page 39). If the ringer volume is set to off, that base ringer is
silenced for all incoming and intercom calls.
Telephone settings
>
Ringers
Settings
>
Ringer volume
Ringer tone
RINGER VOLUME
RINGER VOLUME
Ringer off
>
Play messages
Answering sys
Loading...