Samsung K4E170812D-F, K4E170812D-B, K4E170811D-F, K4E170811D-B, K4E160812D-F Datasheet

K4E170811D, K4E160811D

CMOS DRAMK4E170812D, K4E160812D

This is a family of 2,097,152 x 8 bit Extended Data Out CMOS DRAMs. Extended Data Out Mode offers high speed random access of

memory cells within the same row, so called Hyper Page Mode. Power supply voltage (+5.0V or +3.3V), refresh cycle (2K Ref. or 4K

Ref.), access time (-50 or -60), power consumption(Normal or Low power) and package type(SOJ or TSOP-II) are optional features of

this family. All of this family have CAS-before-RAS refresh, RAS-only refresh and Hidden refresh capabilities. Furthermore, Self-refresh

operation is available in L-version. This 2Mx8 EDO Mode DRAM family is fabricated using Samsung′s advanced CMOS process to real-

ize high band-width, low power consumption and high reliability. It may be used as graphic memory unit for microcomputer and personal

computer.

• Part Identification

- K4E170811D-B(F) (5V, 4K Ref.)

- K4E160811D-B(F) (5V, 2K Ref.)

- K4E170812D-B(F) (3.3V, 4K Ref.)

- K4E160812D-B(F) (3.3V, 2K Ref.)

• Extended Data Out Mode operation

(Fast page mode with Extended Data Out)

• CAS-before-RAS refresh capability

• RAS-only and Hidden refresh capability

• Self-refresh capability (L-ver only)

• Fast parallel test mode capability

• TTL(5V)/LVTTL(3.3V) compatible inputs and outputs

• Early Write or output enable controlled write

• JEDEC Standard pinout

• Available in Plastic SOJ and TSOP(II) packages

• Single +5V±10% power supply (5V product)

• Single +3.3V±0.3V power supply (3.3V product)

Control

Clocks

RAS

CAS

W

Vcc

Vss

DQ0

to

DQ7

A0-A11

(A0 - A10)*1

A0 - A8

(A0 - A9)*1

Memory Array

2,097,152 x8

Cells

SAMSUNG ELECTRONICS CO., LTD. reserves the right to

change products and specifications without notice.

2M x 8Bit CMOS Dynamic RAM with Extended Data Out

DESCRIPTION

FEATURES

FUNCTIONAL BLOCK DIAGRAM

• Refresh Cycles

Part

NO.

VCC

Refresh

cycle

Refresh period

Normal L-ver

K4E170811D 5V

4K 64ms

128ms

K4E170812D 3.3V

K4E160811D 5V

2K 32ms

K4E160812D 3.3V

• Performance Range

Speed

tRAC tCAC tRC tHPC

Remark

-50 50ns 13ns 84ns 20ns 5V/3.3V

-60 60ns 15ns 104ns 25ns 5V/3.3V

• Active Power Dissipation

Speed

3.3V 5V

4K 2K 4K 2K

-50 324 396 495 605

-60 288 360 440 550

Unit : mW

Sense Amps & I/O

Data out

Buffer

Data in

Buffer

OE

Note) *1 : 2K Refresh

Col. Address Buffer

Row Address Buffer

Refresh Counter

Refresh Control

Refresh Timer

Column Decoder

Row Decoder

VBB Generator

K4E170811D, K4E160811D

CMOS DRAMK4E170812D, K4E160812D

VCC

DQ0

DQ1

DQ2

DQ3

W

RAS

*A11(N.C)

A10

A0

A1

A2

A3

VCC

VSS

DQ7

DQ6

DQ5

DQ4

CAS

OE

A9

A8

A7

A6

A5

A4

VSS

1

2

3

4

5

6

7

8

9

10

11

12

13

14

28

27

26

25

24

23

22

21

20

19

18

17

16

15

PIN CONFIGURATION (Top Views)

Pin Name Pin Function

A0 - A11 Address Inputs (4K Product)

A0 - A10 Address Inputs (2K Product)

DQ0 - 7 Data In/Out

VSS Ground

RAS Row Address Strobe

CAS Column Address Strobe

W Read/Write Input

OE Data Output Enable

VCC

Power(+5V)

Power(+3.3V)

N.C No Connection (2K Ref. product)

VCC

DQ0

DQ1

DQ2

DQ3

W

RAS

*A11(N.C)

A10

A0

A1

A2

A3

VCC

VSS

DQ7

DQ6

DQ5

DQ4

CAS

OE

A9

A8

A7

A6

A5

A4

VSS

1

2

3

4

5

6

7

8

9

10

11

12

13

14

28

27

26

25

24

23

22

21

20

19

18

17

16

15

*A11 is N.C for K4E160811(2)D(5V/3.3V, 2K Ref. product)

B : 300mil 28 SOJ

F : 300mil 28 TSOP II

• K4E17(6)0811(2)D-B

• K4E17(6)0811(2)D-F

K4E170811D, K4E160811D

CMOS DRAMK4E170812D, K4E160812D

ABSOLUTE MAXIMUM RATINGS

* Permanent device damage may occur if "ABSOLUTE MAXIMUM RATINGS" are exceeded. Functional operation should be restricted

to the conditions as detailed in the operational sections of this data sheet. Exposure to absolute maximum rating conditions for

extended periods may affect device reliability.

Parameter Symbol

Rating

Units

3.3V 5V

Voltage on any pin relative to VSS VIN,VOUT -0.5 to +4.6 -1.0 to +7.0 V

Voltage on VCC supply relative to VSS VCC -0.5 to +4.6 -1.0 to +7.0 V

Storage Temperature Tstg -55 to +150 -55 to +150 °C

Power Dissipation PD 1 1 W

Short Circuit Output Current IOS Address 50 50 mA

RECOMMENDED OPERATING CONDITIONS (Voltage referenced to Vss, TA= 0 to 70°C)

*1 : VCC+1.3V/15ns(3.3V), VCC+2.0V/20ns(5V), Pulse width is measured at VCC

*2 : -1.3V/15ns(3.3V), -2.0V/20ns(5V), Pulse width is measured at VSS

Parameter Symbol

3.3V 5V

Units

Min Typ Max Min Typ Max

Supply Voltage VCC 3.0 3.3 3.6 4.5 5.0 5.5 V

Ground VSS 0 0 0 0 0 0 V

Input High Voltage VIH 2.0 -

VCC+0.3

*1

2.4 -

VCC+1.0

*1

V

Input Low Voltage VIL

-0.3

*2

- 0.8

-1.0

*2

- 0.8 V

DC AND OPERATING CHARACTERISTICS (Recommended operating conditions unless otherwise noted.)

Max Parameter Symbol Min Max Units

3.3V

Input Leakage Current (Any input 0≤VIN≤VIN+0.3V,

all other input pins not under test=0 Volt)

II(L) -5 5 uA

Output Leakage Current

(Data out is disabled, 0V≤VOUT≤VCC)

IO(L) -5 5 uA

Output High Voltage Level(IOH=-2mA) VOH 2.4 - V

Output Low Voltage Level(IOL=2mA) VOL - 0.4 V

5V

Input Leakage Current (Any input 0≤VIN≤VIN+0.5V,

all other input pins not under test=0 Volt)

II(L) -5 5 uA

Output Leakage Current

(Data out is disabled, 0V≤VOUT≤VCC)

IO(L) -5 5 uA

Output High Voltage Level(IOH=-5mA) VOH 2.4 - V

Output Low Voltage Level(IOL=4.2mA) VOL - 0.4 V

K4E170811D, K4E160811D

CMOS DRAMK4E170812D, K4E160812D

*Note :

ICC1, ICC3, ICC4 and ICC6 are dependent on output loading and cycle rates. Specified values are obtained with the output open.

ICC is specified as an average current. In ICC1, ICC3 and ICC6, address can be changed maximum once while RAS=VIL. In ICC4,

address can be changed maximum once within one Hyper page mode cycle time, tHPC.

DC AND OPERATING CHARACTERISTICS (Continued)

ICC1* : Operating Current (RAS and CAS cycling @tRC=min.)

ICC2 : Standby Current (RAS=CAS=W=VIH)

ICC3* : RAS-only Refresh Current (CAS=VIH, RAS cycling @tRC=min.)

ICC4* : Hyper Page Mode Current (RAS=VIL, CAS, Address cycling @tHPC=min.)

ICC5 : Standby Current (RAS=CAS=W=VCC-0.2V)

ICC6* : CAS-Before-RAS Refresh Current (RAS and CAS cycling @tRC=min.)

ICC7 : Battery back-up current, Average power supply current, Battery back-up mode

Input high voltage(VIH)=VCC-0.2V, Input low voltage(VIL)=0.2V, CAS=0.2V,

DQ=Don′t care, TRC=31.25us(4K/L-ver), 62.5us(2K/L-ver),

TRAS=TRASmin~300ns

ICCS : Self Refresh Current

RAS=CAS=VIL, W=OE=A0 ~ A11=VCC-0.2V or 0.2V,

DQ0 ~ DQ7=VCC-0.2V, 0.2V or Open

Symbol Power Speed

Max

Units

K4E170812D K4E160812D K4E170811D K4E160811D

ICC1 Don′t care

-50

-60

90

80

110

100

90

80

110

100

mA

mA

ICC2

Normal

L

Don′t care

1

1

1

1

2

1

2

1

mA

mA

ICC3 Don′t care

-50

-60

90

80

110

100

90

80

110

100

mA

mA

ICC4 Don′t care

-50

-60

80

70

90

80

80

70

90

80

mA

mA

ICC5

Normal

L

Don′t care

0.5

200

0.5

200

1

250

1

250

mA

uA

ICC6 Don′t care

-50

-60

90

80

110

100

90

80

110

100

mA

mA

ICC7 L Don′t care 250 250 300 300 uA

ICCS L Don′t care 200 200 250 250 uA

K4E170811D, K4E160811D

CMOS DRAMK4E170812D, K4E160812D

CAPACITANCE (TA=25°C, VCC=5V or 3.3V, f=1MHz)

Parameter Symbol Min Max Units

Input capacitance [A0 ~ A11] CIN1 - 5 pF

Input capacitance [RAS, CAS, W, OE] CIN2 - 7 pF

Output capacitance [DQ0 - DQ7] CDQ - 7 pF

Test condition (5V device) : VCC=5.0V±10%, Vih/Vil=2.4/0.8V, Voh/Vol=2.0/0.8V

Parameter Symbol

-50 -60

Units Notes

Min Max Min Max

Random read or write cycle time

tRC

84 104 ns

Read-modify-write cycle time

tRWC

116 140 ns

Access time from RAS

tRAC

50 60 ns 3,4,10

Access time from CAS

tCAC

13 15 ns 3,4,5

Access time from column address

tAA

25 30 ns 3,10

CAS to output in Low-Z

tCLZ

3 3 ns 3

Output buffer turn-off delay from CAS

tCEZ

3 13 3 15 ns 6,14

OE to output in Low-Z

tOLZ

3 3 ns 3

Transition time (rise and fall)

tT

2 50 2 50 ns 2

RAS precharge time

tRP

30 40 ns

RAS pulse width

tRAS

50 10K 60 10K ns

RAS hold time

tRSH

13 15 ns

CAS hold time

tCSH

38 45 ns

CAS pulse width

tCAS

8 10K 10 10K ns

RAS to CAS delay time

tRCD

20 37 20 45 ns 4

RAS to column address delay time

tRAD

15 25 15 30 ns 10

CAS to RAS precharge time

tCRP

5 5 ns

Row address set-up time

tASR

0 0 ns

Row address hold time

tRAH

10 10 ns

Column address set-up time

tASC

0 0 ns

Column address hold time

tCAH

8 10 ns

Column address to RAS lead time

tRAL

25 30 ns

Read command set-up time

tRCS

0 0 ns

Read command hold time referenced to CAS

tRCH

0 0 ns 8

Read command hold time referenced to RAS

tRRH

0 0 ns 8

Write command hold time

tWCH

10 10 ns

Write command pulse width

tWP

10 10 ns

Write command to RAS lead time

tRWL

13 15 ns

Write command to CAS lead time

tCWL

8 10 ns

AC CHARACTERISTICS (0°C≤TA≤70°C, See note 1,2)

Test condition (3.3V device) : VCC=3.3V±0.3V, Vih/Vil=2.0/0.8V, Voh/Vol=2.0/0.8V

K4E170811D, K4E160811D

CMOS DRAMK4E170812D, K4E160812D

AC CHARACTERISTICS (Continued)

Parameter Symbol

-50 -60

Units Notes

Min Max Min Max

Data set-up time

tDS

0 0 ns 9

Data hold time

tDH

8 10 ns 9

Refresh period (2K, Normal)

tREF

32 32 ms

Refresh period (4K, Normal)

tREF

64 64 ms

Refresh period (L-ver)

tREF

128 128 ms

Write command set-up time

tWCS

0 0 ns 7

CAS to W delay time

tCWD

30 34 ns 7

RAS to W delay time

tRWD

67 79 ns 7

Column address to W delay time

tAWD

42 49 ns 7

CAS precharge to W delay time

tCPWD

47 54 ns

CAS set-up time (CAS -before-RAS refresh)

tCSR

5 5 ns

CAS hold time (CAS -before-RAS refresh)

tCHR

10 10 ns

RAS to CAS precharge time

tRPC

5 5 ns

Access time from CAS precharge

tCPA

28 35 ns 3

Hyper Page cycle time

tHPC

20 25 ns 13

Hyper Page read-modify-write cycle time

tHPRWC

47 56 ns 13

CAS precharge time (Hyper Page cycle)

tCP

8 10 ns

RAS pulse width (Hyper Page cycle)

tRASP

50 200K 60 200K ns

RAS hold time from CAS precharge

tRHCP

30 35 ns

OE access time

tOEA

13 15 ns

OE to data delay

tOED

13 15 ns

Output buffer turn off delay time from OE

tOEZ

3 13 3 15 ns 6

OE command hold time

tOEH

13 15 ns

Write command set-up time (Test mode in)

tWTS

10 10 ns 11

Write command hold time (Test mode in)

tWTH

10 10 ns 11

W to RAS precharge time(C-B-R refresh)

tWRP

10 10 ns

W to RAS hold time(C-B-R refresh)

tWRH

10 10 ns

Output data hold time

tDOH

5 5 ns

Output buffer turn off delay from RAS

tREZ

3 13 3 15 ns 6,14

Output buffer turn off delay from W

tWEZ

3 13 3 15 ns 6

W to data delay

tWED

15 15 ns

OE to CAS hold time

tOCH

5 5 ns

CAS hold time to OE

tCHO

5 5 ns

OE precharge time

tOEP

5 5 ns

W pulse width (Hyper Page Cycle)

tWPE

5 5 ns

RAS pulse width (C-B-R self refresh)

tRASS

100 100 us 15,16,17

RAS precharge time (C-B-R self refresh)

tRPS

90 110 ns 15,16,17

CAS hold time (C-B-R self refresh)

tCHS

-50 -50 ns 15,16,17

K4E170811D, K4E160811D

CMOS DRAMK4E170812D, K4E160812D

TEST MODE CYCLE

Parameter Symbol

-50 -60

Units Note

Min Max Min Max

Random read or write cycle time

tRC

89 109 ns

Read-modify-write cycle time

tRWC

121 145 ns

Access time from RAS

tRAC

55 65 ns 3,4,10,12

Access time from CAS

tCAC

18 20 ns 3,4,5,12

Access time from column address

tAA

30 35 ns 3,10,12

RAS pulse width

tRAS

55 10K 65 10K ns

CAS pulse width

tCAS

13 10K 15 10K ns

RAS hold time

tRSH

18 20 ns

CAS hold time

tCSH

43 50 ns

Column address to RAS lead time

tRAL

30 35 ns

CAS to W delay time

tCWD

35 39 ns 7

RAS to W delay time

tRWD

72 84 ns 7

Column address to W delay time

tAWD

47 54 ns 7

CAS precharge to W delay time

tCPWD

52 59 ns

Hyper Page cycle time

tHPC

25 30 ns 13

Hyper Page read-modify-write cycle time

tHPRWC

53 61 ns 13

RAS pulse width (Hyper Page cycle)

tRASP

55 200K 65 200K ns

Access time from CAS precharge

tCPA

33 40 ns 3

OE access time

tOEA

18 20 ns

OE to data delay

tOED

18 20 ns

OE command hold time

tOEH

18 20 ns

( Note 11 )