Loading...
RSLogix 5000
FuzzyDesigner
Installation Guide
Important User Information
Solid state equipment has operational characteristics differing from those of electromechanical equipment. Safety Guidelines for the Application, Installation and Maintenance of Solid State Controls (publication SGI-1.1 available from your local Rockwell Automation sales office or online at http://literature.rockwellautomation.com) describes some important differences between solid state equipment and hard-wired electromechanical devices. Because of this difference, and also because of the wide variety of uses for solid state equipment, all persons responsible for applying this equipment must satisfy themselves that each intended application of this equipment is acceptable. In no event will Rockwell Automation, Inc. be responsible or liable for indirect or consequential damages resulting from the use or application of this equipment.
The examples and diagrams in this manual are included solely for illustrative purposes. Because of the many variables and requirements associated with any particular installation, Rockwell Automation, Inc. cannot assume responsibility or liability for actual use based on the examples and diagrams.
No patent liability is assumed by Rockwell Automation, Inc. with respect to use of information, circuits, equipment, or software described in this manual.
Reproduction of the contents of this manual, in whole or in part, without written permission of Rockwell Automation, Inc., is prohibited.
Throughout this manual, when necessary, we use notes to make you aware of safety considerations.
|
WARNING |
|
Identifies information about practices or circumstances that can cause an explosion in a |
||
|
|
|
|
|
|
|
|
|
|
|
hazardous environment, which may lead to personal injury or death, property damage, or |
|
|
|
|
|
economic loss. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Identifies information that is critical for successful application and understanding of the |
|
IMPORTANT |
|
|||
|
|
product. |
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ATTENTION |
|
Identifies information about practices or circumstances that can lead to personal injury or |
||
|
|
|
|
|
|
|
|
|
|
|
death, property damage, or economic loss. Attentions help you to identify a hazard, avoid a |
|
|
|
|
|
hazard and recognize the consequences. |
|
|
|
|
|
|
SHOCK HAZARD
Labels may be located on or inside the equipment, for example, a drive or motor, to alert people that dangerous voltage may be present.
BURN HAZARD
Labels may be located on or inside the equipment, for example, a drive or motor, to alert people that surfaces may be at dangerous temperatures.
RSLogix 5000 FuzzyDesigner version 16.00 Installation Guide
System Requirements
To use RSLogix 5000 FuzzyDesigner version 16.00, you need:
•Intel Pentium (or compatible) 90 MHz or higher, 64 MB of RAM.
•one of the following operating systems: Microsoft Windows 2000, Windows XP, Windows Server 2003.
•Microsoft .NET Framework 1.1.
•Microsoft .NET Framework 1.1 Service Pack 1 (SP1).
Contents of the installation CD
•FuzzyDesigner CD browser: autorun.exe
•FuzzyDesigner setup: ENU\FuzzyDesigner\Setup.exe
•FactoryTalk Activation Tool: ENU\FactoryTalk
•Microsoft Windows .NET Framework1.1: dotNet\dotnetfx.exe
•Microsoft Windows .NET Framework 1.1 Service Pack 1: dotNet\NDP1.1sp1-KB867460-X86.exe
Publication LOGIX-IN001A-EN-P - May 2007
Loading...