IntelliVue MX600
IntelliVue MX600 and MX700
Patient Monitor
Philips 865241, 865242 Technical Data Sheet
The Philips IntelliVue MX600
1
and MX700 patient
monitors offer a flexible and modular monitoring
solution, designed to suit a broad spectrum of needs.
The monitors can be connected to the Philips Multi-
Measurement Module (MMS) family with its
extensions, plug-in measurement modules and the
IntelliVue anesthetic gas modules to extend its
functionality with plug-and-play convenience.
Dedicated configurations are available for the
anesthesia, critical and cardiac, and neonatal care
environments. The integrated PC (iPC) allows access
to relevant patient information residing on the
hospital’s intranet.
Features
• Intuitive user interface.
• Simple menu hierarchy gives fast access to all basic
monitoring tasks.
• Screen layouts are easily adjustable, allowing
flexible display of measurement information.
• Previous/Next Screen function provides access to
the ten most recently used screens including the
last three modified screens.
• Temperature, height, and weight can be configured
either in metric or imperial units. Pressure
measurements can be displayed in kPa or mmHg.
Gases can be displayed in kPa or mmHg.
• Patient data management with tabular and graphic
trends, and high resolution trends to track changes
with beat-to-beat resolution.
1
Not available in all geographies, please check for availability.
2
• Drug, ventilation, hemodynamic, and oxygenation calculations.
• User or case-specific profiles enable rapid case turnover.
• Patented automatic alarm limits help clinicians provide care more
efficiently.
• Event Surveillance including Neonatal Event Review for automatic
detection of patient status deterioration.
• Bed-to-bed overview provides clinicians with an overview of all the
patient beds in their care.
• Choice of input devices: Touchscreen, trimknob, remote control,
trackball, mouse, keyboard or barcode reader.
• Capable of functioning in a wireless infrastructure.
• Graphical measurement window shows which measurements are
being measured by which device, making it easier to resolve
measurement label conflicts.
• Timers application allows you to set timers to notify you when a
specific time period has expired.
• Second independent display capability using the iPC.
• The iPC can host Windows applications and safely share the display
with the MX600 and MX700s’ realtime system or drive a second
display, independent of size and resolution. The content displayed on
the second display can be different from the content on the main
display of the MX600 and MX700 and can show either realtime vital
signs information, PC applications or both at the same time. A
separate isolated LAN interface allows access to the hospital’s
backbone independent of the MX600 and MX700. Six USB interfaces
provide connectivity to external computer devices, for example,
printers or input devices such as the touch interface of the selected
display
• Bedside information access using the iPC or Portal technology.
Intended Use
The IntelliVue MX600 and MX700 are intended to be used for
monitoring, recording, and alarming of multiple physiological
parameters of adults, pediatrics, and neonates in hospital environments
by trained health care professionals.
U.S. Federal Law restricts this device to sale by or on the order of a
physician.
Modularity
The monitor is available in a choice of models - MX600 and MX700 -
to suit different needs throughout the care environment. All the
models offer the same comprehensive range of measurements.
The monitor’s functionality can be extended by connecting Philips plug-
in modules, the multi-measurement module (MMS) family with
extensions, and anesthetic gas modules with plug-and-play convenience.
The monitors are available as standalone or networked solutions.
The monitors’ modular design allows new capabilities to be added in
the future as monitoring requirements change. This upgradability gives
the security of knowing that the monitor can be enhanced and updated
as practices and technologies advance, protecting long-term
investments.
Main Components
Display
The monitors have a color 15” LCD TFT display with a wide viewing
angle, providing high resolution waveform and data presentation.
The MX600 and MX700 integrate the display and the processing unit
into one device. One external slave display can be connected to a built-
in DVI-I port.
A second independent display can be connected via the iPC. Multiple
display resolutions including widescreen formats are supported on the
iPC.
Integrated PC (iPC)
The iPC is a fan-less, medical grade PC residing within the MX600 and
MX700 and as such designed for continuous operation in the patient
vicinity.
The iPC uses MS Windows 7 (or XP) as operating system and can host
respective applications. These applications can either be:
– Windows applications, such as Internet Explorer,
– Philips applications such as iSite clients or an application launch pad,
– Third party applications or
– Hospital owned and developed software.
The iPC is designed as an “open” PC and such can be serviced and
maintained by the hospital’s IT department as well as by Philips.
A separate isolated LAN interface allows access to the hospital’s
backbone independent of the MX600 and MX700.
The iPC can safely share the main display with the MX600 and MX700
(single display setup) and/or be used with a standard or a medical grade
display (dual display setup), either provided by Philips or another
manufacturer. The iPC supports displays with or without touch
operation.
The iPC has six USB 2.0 ports (five at the rear and one at the side of
the monitor) supporting High-Speed mode for computer peripherals
such as keyboard, mouse, barcode reader, touch display etc.
User Interface
The color graphical user interface is designed for fast and intuitive
operation, and ensures that clinicians quickly feel at ease using the
monitor.
SmartKeys with intuitive icons allow monitoring tasks to be performed
quickly and easily, directly on the monitor screen.
Waves and numerics are color-coded.
The MX600 and MX700 display up to six waves simultaneously. For 12-
lead ECG monitoring it can display 12 real-time ECG waves, with a
rhythm strip and all ST values.
3
Flexible screen layout allows optimal use of the available display space,
for example, waves can be overlapped or wave size can adjust
dynamically depending on the number of waves configured for the
space.
The Basic Help provides on-screen operating help, explaining INOP
and alarm messages.
Touchscreen Operation
The MX700 monitor is supplied as standard with a touchscreen display
with a resistive surface.
Trimknob Operation
The Trimknob is used to operate the MX600 monitor. The MX700 can
also be operated via the Trimknob.
Hardkeys
To guarantee immediate access to the functions Audio Off/Paused,
Alarms On/Off/Paused and Main Screen with the Trimknob operation,
hardkeys are located next to the Trimknob
Remote Control
The IntelliVue Remote Control 865244 provides
direct access to 5 hardkeys, a navigation knob and a
numeric keypad which can also be used for
alphanumeric entry. The hardkeys include
“Silence”, “Alarms Off / Pause Alarms”, “Back
Key”, “MainScreen”, and a “SmartKeys” key that
displays a block of configurable smart keys. The
remote control is connected to the MX600 and
MX700 monitors via USB interface or SRR
interface (wireless) and used for remote operation
of the monitor.
Input Devices
Supported input devices include USB-compatible
off-the-shelf computer accessories such as mouse,
keyboard, trackball or barcode reader. All input devices can be used
individually or in combination.
Mouse
Any specified USB mouse or trackball may be used for data entry.
Computer Keyboard
A computer keyboard can be connected to the monitor via a USB
connection and used for data entry.
Keyboard
If alpha or numeric data entry is required, for example to enter patient
demographics, for the MX700 a pop-up keyboard will automatically
appear on the screen. The MX600 requires a USB-compatible off-the-
shelf keyboard.
Barcode Reader
A USB barcode reader in “keyboard emulation mode” can be used via a
USB connection.
Multi-Measurement Module
The M3001A Multi-
Measurement Module
(MMS) can be
connected without
cables onto the side of
the Flexible Module
Rack (FMS). The MMS
can also be connected
to the monitor or FMS
with cables in order to
place it in patient vicinity. It sends measurement waves and numerics to
the monitor screen and generates alarms and INOPs. Patient
demographic details are stored in the MMS. Eight hours of patient
trends can be transferred to the monitor.
The MMS provides measurement data for Electrocardiogram (ECG)/
Arrhythmia, Respiration, Oxygen Saturation of Arterial Blood (SpO
2
),
Non-invasive Blood Pressure (NBP), and Invasive Pressure or
Temperature. It features 12-lead ECG capability, multi-lead arrhythmia,
and 12-lead ST analysis.
An MMS Extension can optionally be slotted onto the Multi-
Measurement Module to add:
• an additional Invasive Pressure and Temperature Measurement, a
third Invasive Pressure or Temperature Measurement (one at a time)
and optionally a Cardiac Output/Continuous Cardiac Output
measurement (M3012A)
, or
• an additional Invasive Pressure Measurement, a third Invasive Pressure
or Temperature Measurement (one at a time), an integrated
mainstream or sidestream CO
2
measurement and optionally a
Cardiac Output/Continuous Cardiac Output measurement
(M3014A), or
• an additional Invasive Pressure or Temperature measurement (one at
a time) and a Microstream® CO
2
1
measurement (M3015A), or
• a dual Invasive Pressure and Temperature measurement and a
Microstream® CO
2
1
measurement (M3015B).
1
Microstream is a registered trademark of Oridion Systems Ltd.
4
X2 Multi-Measurement Module
The M3002A X2
Multi-Measurement
Module can be
connected without
cables onto the side of
the Flexible Module
Rack (FMS). The X2
can also be connected
to the monitor or FMS
with cables in order to
place it in patient
vicinity. It sends
measurement waves
and numerics to the
monitor screen and generates alarms and INOPs. Up to 24 hours of
patient trends are stored in the X2, as well as patient demographic
details. Eight hours of patient trends can be transferred to the host
monitor.
The X2 provides measurement data for Electrocardiogram (ECG)/
Arrhythmia, Respiration, Oxygen Saturation of Arterial Blood (SpO
2
),
CO
2
, Non-Invasive Blood Pressure (NBP), and Invasive Pressure or
Temperature. It features 12-lead ECG capability, multi-lead arrhythmia,
and 12-lead ST analysis.
An MMS Extension can optionally be slotted onto the X2 to add:
• an additional Invasive Pressure and Temperature Measurement, a
third Invasive Pressure or Temperature Measurement (one at a time)
and optionally a Cardiac Output/Continuous Cardiac Output
measurement (M3012A)
, or
• an additional Invasive Pressure Measurement, a third Invasive Pressure
or Temperature Measurement (one at a time), an integrated
mainstream or sidestream CO
2
measurement and optionally a
Cardiac Output/Continuous Cardiac Output measurement
(M3014A), or
• an additional Invasive Pressure or Temperature measurement (one at
a time) and a Microstream® CO
2
1
measurement (M3015A), or
• a dual Invasive Pressure and Temperature measurement and a
Microstream® CO
2
1
measurement (M3015B).
The X2 can also be used as a stand-alone monitor.
Flexible Module Rack with Plug-In Modules
The Flexible Module Rack FMS-4 (865243) has four slots for plug-in
measurement modules. The optional Flexible Module Rack with MMS
mount gives the possibility to mount an MMS, X2 and MMS Extensions
onto the side of the Flexible Module Rack.
Individual plug-in measurement modules are available to measure:
– M1006B Invasive Blood Pressure
– M1011A Intravascular Oxygen Saturation Module (SO
2
)
– M1012A Cardiac Output/Continuous Cardiac Output
– M1014A Spirometry
– M1018A Transcutaneous Gas
– M1020B SpO
2
– M1021A Mixed Venous Oxygen Saturation (SvO
2
)
– M1027A Electroencephalograph (EEG)
– M1029A Temperature
– M1034A Bispectral Index (BIS
TM
)
2
Additional plug-in modules available are:
– M1116B Thermal Array Recorder
– M1032A VueLink Device Interface.
– 865115 EC10 IntelliBridge
1
Microstream is a registered trademark of Oridion Systems Ltd.
IntelliVue X2 Multi-Measurement Module
2
Bispectral Index and BIS are registered trademarks of Aspect Medical Systems, Inc.
Flexible Module Rack FMS-4
Optional Flexible Module Rack FMS-4 E04 with MMS Mount
5
IntelliVue Anesthetic Gas Modules
Versatile IntelliVue G1 and G5 gas modules measure the five most
commonly used anesthetic gases, as well as N
2
O and CO
2
. They all
provide inspiration and expiration values for display on Philips IntelliVue
patient monitors and the values required for MAC calculation in the
IntelliVue patient monitors. The IntelliVue G1 gas module measures the
single agent chosen by the clinician. The IntelliVue G5 features
automatic agent identification and mixed-agent measurement capability.
Advanced O
2
technology based on paramagnetic measurements is
optional with the G1 and included standard with the G5.
Additionally, the AGM (Anesthetic Gas Module) offers auto-ID and
single agent measurement capabilities.
Mounting
The standard mounting options enable flexible, space saving placement
of the monitors for an ergonomic work space.
Applications for Specific Care Settings
Anesthesia Features
•The IntelliVue G1 and G5 and the Anesthetic Gas Module (AGM)
measure the five most commonly used anesthetic gases, as well as
N
2
O and CO
2
.
•The BIS module assesses the level of consciousness in the OR,
providing a measure of the effect of anesthetic agents.
• VueLink provides an external device interfacing capability to
Anesthesia Machines and other external instruments which have a
serial RS-232 and/or analog output. It generates alarms and provides
up to two waves and six numerics, depending on the device.
•The IntelliBridge EC10 Module provides external device interface
capability to external devices at the bedside which have a serial RS-
232 and/or LAN output.
•The EEG module determines coma prognosis and extent of cerebral
insult. CSA information can be either permanently displayed on
specially designed screens or viewed in a separate window.
• Screens provide flexible viewing of patient information during
different procedures or phases of an anesthesia case.
• Respiratory Loops
The IntelliVue Patient monitor can generate three types of
respiratory loops and display one real-time loop and up to 6 stored
loops simultaneously. This assists in early detection of patient airway
problems (for example, atelectasis, bronchospasm) and ventilator
problems (for example, leaks and kinked tubes).
•The Spirometry Module provides airway pressure, volume and flow
measurements to monitor changes in respiratory status.
Critical and Cardiac Care Features
• The monitor performs multi-lead arrhythmia detection analysis on
the patient’s ECG waveform at the bedside. It analyzes for ventricular
arrhythmias, calculates heart rate, and generates alarms, including
asystole, bradycardia, and ventricular fibrillation.
•Up to 12leads of ST segment analysis can be performed on adult
patients at the bedside, measuring ST segment elevation and
depression and generating alarms and events. The user can trend ST
changes, set high and low alarm limits, and set both ST and isoelectric
measurement points. ST points can be set either relative to the J-
point or directly by selecting a numeric value.
• QT/QTc interval monitoring provides the measured QT interval,
the calculated heart-rate corrected QTc value and a
ΔQTc value,
which tracks variation in the QT interval in relation to a baseline
value.
•SO
2
and ScvO
2
measurements provide guidance for the treatment of
sepsis treatment protocols.
•The Parameter Histogram View of the Vital Signs Trend allows the
clinician to see, at a glance, the stability of the patient's condition for a
selected time period.
• ST Map application shows ST changes over time in two multi-axis
spider diagrams.
• 12-lead ECG data can be measured, using either the EASI placement
method with five standard electrodes or conventional electrode
placement with 10 electrodes.
1
12 real-time ECG waveforms can be displayed simultaneously on all
IntelliVue models.
• High performance pulse oximetry technologies perform accurately
even in cases with low perfusion.
• Choice of Microstream, sidestream and mainstream CO
2
monitoring
for high quality measurements with intubated and non-intubated
patients.
• Continuous cardiac output and advanced hemodynamic assessment
are provided using the PiCCO
TM
method without a pulmonary
catheter.
2
• Clinical calculations enable stored and manually entered data to be
used to perform hemodynamic, ventilation and oxygenation
calculations. Calculated data is displayed in both indexed and non-
indexed format.
• BIS monitoring provides sedation assessment in critical and cardiac
care environments.
• Spirometry measurements help to manage ventilator settings and
weaning.
Neonatal Monitoring Features
• Transcutaneous gas (TcGas) monitoring helps to optimize
respiratory therapy in neonates.
1
EASI-derived 12-lead ECGs and their measurements are approximations to
conventional 12-lead ECGs. As the 12-lead ECG derived with EASI is not exactly
identical to the 12-lead conventional ECG obtained from an electrocardiograph, it
should not be used for diagnostic purposes.
2
PiCCO
TM
is a trademark of Pulsion Medical Systems AG.
6
• Dual-Pulse Oximetry capability allows the clinician to measure pre
and post-ductal saturations.
• The Oxygen CardioRespiroGram (oxyCRG) screens provide a
simultaneous presentation of up to three High-Resolution Trends:
• beat-to-beat heart rate (btbHR)
• an oxygenation measurement trend (SpO
2
or tcpO
2
)
• compressed respiration rate.
• This customized display gives clinicians a convenient overview of the
neonatal patient’s most important vital signs, helping them to identify
significant events.
• Continuous oxyCRG recordings can be made at the bedside on the
M1116B Recorder.
•Dual SpO
2
measurement provides clinical support through
comparison and trending of the pulse oximetry values from two
distinct patient sites.
• Trended values can also be viewed in the form of a histogram. The
SpO
2
histograms can be trend histograms or real-time histograms
with 1-second samples.
• In Event Surveillance, in the NER group, you can run a Car Seat
Assessment Record (CAR). This is a special period of event
surveillance for neonates during a car seat test. During the CAR
period, a real-time SpO
2
histogram is also generated with 1-second
samples.
IntelliVue Applications
Clinical Decision Support
Clinicians are continuously drawing mental images from their
observations of patients’ vital signs. The IntelliVue’s clinical decision
support applications offer this dynamic “minds eye view” directly on
the monitoring screen display.
ProtocolWatch
ProtocolWatch allows clinicians to run clinical protocols that can
monitor developments in the patient’s condition. The SSC Sepsis
Protocol runs on the ProtocolWatch application and is used in
screening for severe sepsis and monitoring its treatment.
ST Map
ST Map provides a graphical display that can help clinicians to recognize
ST changes and their location in the heart more easily. ST Map collects
ST values created from the frontal (limb leads) and horizontal (chest
leads) plane into an integrated display. The maps are multi-axis
portraits of the patient’s ST segments as measured with the ST/AR
arrhythmia algorithm.
Horizon Display
Horizon trends provide clinicians with a graphical visualization tool that
allows the end user to detect at a glance the patients’ current clinical
status. By combining parameters together on the display, the clinician is
assisted in their cognitive process of pattern recognition.
Loops
Up to six loops of each type can be stored and compared to detect
respiratory changes more easily.
Screen Display Flexibility
Up to 20 different screens can be created per monitor, which means
that the clinician has the ability to have a screen created to match a
specific clinical scenario on which the data that matters is displayed.
This streamlines the information that needs to be processed and
interpreted to make the right decision at the right time.
Tr en d s
• A choice of four standard trend database configurations is provided,
designed to suit specific application areas. Patient data from up to
16 measurement numerics can be sampled every 12 seconds, one
minute, or five minutes, and stored for a period ranging from four to
48 hours.
• Tabular Trends (Vital Signs) show data for up to 16 measurement
numerics in tabular form. Tabular Trends can either be viewed in a
separate window or permanently displayed on specially designed
screens.
– Each NBP measurement generates a column in the Vital Signs trend
table. The values for the other measurements are added to provide
a complete vital signs set for the NBP measurement time.
•With Graphic Trends, up to three rows of measurement trends can
be displayed in graphic form, each combining up to three
measurements. Graphical Trends can either be viewed in a separate
window or permanently displayed on specially designed screens.
• Screen Trends permanently display trend data for periodic and
aperiodic parameters in graphical format on special screens. The
displayed time period can be set to 30 min, 1 h, 2 h or 4 h.
• High Resolution Trends allow the user to track fast-changing
measurement trends with beat-to-beat resolution (four samples/
second). The number of High Resolution Trends available for display
depends on the wave option purchased.
• Horizon Trends show the deviation from a stored baseline.
• Trended values can be viewed in the form of a histogram. The SpO
2
histograms can be Tren d H ist o g r a ms with 1-second samples.
• Navigation arrows provide easy access to the stored trends. Trend
data can be documented on a locally or remotely connected printer.
•With Event Surveillance, changes in patients’ condition are
automatically detected and an electronic record of data called an
Episode is stored. The Episode can store:
Loading...