Panasonic kx-tgf372 Operation Manual

0 (0)

TGF37x_QG(en).fm Page 1 Friday, November 28, 2014 3:02 PM

Model No. KX-TGF372/KX-TGF373

KX-TGF374/KX-TGF375

KX-TG585SK

Quick Guide

Connections

Base unit

1 Connect the AC adaptor to the unit by pressing the plug firmly. 2 Fasten the cord by hooking it.

3 Connect the AC adaptor to the power outlet.

4Connect the telephone line cord to the unit, then to the single-line telephone jack (RJ11C) until you hear a click. 5 A DSL/ADSL filter (not supplied) is required if you have a DSL/ADSL service.

Note:

L Use only the supplied Panasonic AC adaptor PNLV226.

1

2

 

4

4

 

5

3

Charger

1 Connect the AC adaptor to the power outlet.

1

 

Printed in Malaysia

 

 

PNQW4253ZA TT1114MG0

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Panasonic kx-tgf372 Operation Manual

TGF37x_QG(en).fm Page 2 Friday, November 28, 2014 3:02 PM

Battery installation/Battery charging

Charge for about 7 hours.

2

1

Note:

L USE ONLY rechargeable Ni-MH batteries AAA (R03) size (1).

L Do NOT use alkaline/manganese/Ni-Cd batteries.

L Confirm correct polarities (S, T).

L Follow the directions on the display to set up the unit.

L Confirm Chargingis displayed (2).

Operating tips

Soft keys

By pressing a soft key, you can select the feature shown directly above it on the display. Pay attention to the display to see what functions the soft keys are assigned during operation.

Navigator key Handset:

{^}, {V}, {<}, or {>}: Scroll through various lists and items.

VOL. (Volume: {^} or {V}): Adjust the receiver or speaker volume while talking.

{<} k: View the phonebook entry.

{>} REDIAL: View the redial list.

{V} CID (Caller ID): View the caller list.

Base unit:

{^}, {V}, {7}, or {8}: Scroll through various lists and items.

VOL. (Volume: {^} or {V}): Adjust the speaker volume while talking.

{7}/{8}: Repeat/skip messages during playback.

Handset

Base unit

{^}

{<} {>}

{^}

{7} {8}

{V}

{V}

– 2 –

TGF37x_QG(en).fm Page 3 Friday, November 28, 2014 3:02 PM

Date and time (Handset)

1{MENU}(1)1

2Enter the current month, date, and year. s{OK}

3Enter the current hour and minute (12-hour clock format).

4*: Select AMor PM. s{SAVE} s{OFF}

Recording your greeting message of the answering system for the landline (Handset)

You can record your own greeting message instead of using a pre-recorded greeting message.

1{MENU}(3)2 s{r}: Yess{SELECT}

2After a beep sounds, hold the handset about 20 cm (8 inches) away and speak clearly into the microphone (2 minutes max.).

3Press {STOP} to stop recording. s{OFF}

Link to cell

You can connect your base unit and cellular phone using Bluetooth® wireless technology, so that you can make or answer cellular calls using your phone system. For more details, please visit our Web site: www.panasonic.com/link2cell

L Locate your cellular phone near the base unit. If the cellular phone is too close to the base unit during a cellular call, you may hear noise. For best performance, we recommend placing the cellular phone between 0.6 m to 3 m (2 feet to 10 feet) away from the base unit.

1

2

1Cell line

2Cell phone service providers

Trademarks

L The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by Panasonic Corporation is under license.

L All other trademarks identified herein are the property of their respective owners.

– 3 –

Loading...
+ 7 hidden pages