KX-TGE260
PNQW3881ZA TT1113WK0
Printed in Malaysia
Connections
Base unit
1
Connect the AC adaptor to the unit by pressing the plug firmly.
2
Fasten the cord by hooking it.
3
Connect the AC adaptor to the power outlet.
4
Connect the telephone line cord to the unit, then to the single-line telephone jack (RJ11C) until you hear a click.
5
A DSL/ADSL filter (not supplied) is required if you have a DSL/ADSL service.
Note:
L
Use only the supplied Panasonic AC adaptor PNLV226.
1
4
5
3
4
2
Charger
1
Connect the AC adaptor to the power outlet.
1
Model No. KX-TGE260/KX-TGE262/KX-TGE263
KX-TGE264/KX-TG454SK/KX-TGE270
KX-TGE272/KX-TGE273/KX-TGE274
KX-TGE275/KX-TG465SK
Quick Guide
– 2 –
Battery installation/Battery charging
Charge for about 7 hours.
Note:
L USE ONLY rechargeable Ni-MH batteries AAA (R03) size
().
L Do NOT use Alkaline/Manganese/Ni-Cd batteries.
L Confirm correct polarities (S, T).
L Follow the directions on the display to set up the unit.
L Confirm “Charging” is displayed
()
.
Operating tips
Soft keys
By pressing a soft key, you can select the feature
shown directly above it on the display. Pay attention
to the display to see what functions the soft keys are
assigned during operation.
Navigator key
− {^}, {V}, {<}, or {>}: Scroll through various lists
and items.
− v (Volume: {^} or {V}): Adjust the receiver or
speaker volume while talking.
− {<} k: View the phonebook entry.
− {>} REDIAL: View the redial list.
− {V} CID (Caller ID): View the caller list.
Date and time (Handset)
1 {MENU}(1)1
2 Enter the current month, date, and year. s {OK}
3 Enter the current hour and minute (12-hour clock format).
4 *: Select “AM” or “PM”. s {SAVE} s {OFF}
1
2
1
2
{V}
{^}
{<}
{>}
– 3 –
Recording your greeting message for the answering system
for the landline (Handset)
If you use a pre-recorded greeting message, you do not need to record your own greeting
message.
1 {MENU}(3)2 s {r}: “Yes” s {SELECT}
2 After a beep sounds, hold the handset about 20 cm (8 inches) away and speak clearly into
the microphone (2 minutes max.).
3 Press {STOP} to stop recording. s {OFF}
Link to cell
You can connect your base unit and cellular phone using Bluetooth
®
wireless technology, so that
you can make or answer cellular calls using your phone system. For more details, please visit our
Web site: http://www.panasonic.com/link2cell
L Locate your cellular phone near the base unit. If the cellular phone is too close to the base unit
during a cellular call, you may hear noise. For best performance, we recommend placing the
cellular phone between 0.6 m to 3 m (2 feet to 10 feet) away from the base unit.
1 Cell line
2 Cell phone service providers
Trademarks
L The Bluetooth
®
word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.,
and any use of such marks by Panasonic Corporation is under license.
L All other trademarks identified herein are the property of their respective owners.
1
2
Loading...