kx-tgf380
PNQW4262ZA TT1114WK0 (E)
Printed in China
Connections
1 Connect the AC adaptor to the unit by pressing the plug firmly.
2 Connect the telephone line cord to the unit until you hear a click.
3 Fasten the AC adaptor cord and the telephone line cord by hooking it.
4 Connect the AC adaptor to the power outlet.
5 Connect the telephone line cord to the single-line telephone jack (RJ11C) until you hear a click.
6 A DSL/ADSL filter (not supplied) is required if you have a DSL/ADSL service.
7 Connect the corded handset cord to the corded handset and the base unit until you hear a click.
Note:
LUse only the supplied Panasonic AC adaptor PNLV226.
1 Connect the AC adaptor to the power outlet.
Base unit
7
7
1
4 6
5
1
2
3 3
3
Charger
1
Model No. KX-TGF380/KX-TGF382/KX-TGF383
Quick Guide
TGF38x(en)_QG.fm Page 1 Thursday, November 27, 2014 2:25 PM
– 2 –
Handset battery installation/Handset battery charging
Charge for about 7 hours.
Note:
LUSE ONLY rechargeable Ni-MH batteries AAA (R03) size (1).
LDo NOT use alkaline/manganese/Ni-Cd batteries.
LConfirm correct polarities (S, T).
LFollow the directions on the display to set up the unit.
LConfirm “Charging” is displayed (2).
Operating tips
Soft keys
By pressing a soft key, you can select the feature shown directly above it on the display. Pay attention to the
display to see what functions the soft keys are assigned during operation.
Navigator key
Handset:
− {^}, {V}, {<}, or {>}: Scroll through various lists and items.
− VOL. (Volume: {^} or {V}): Adjust the receiver or speaker volume while talking.
− {<} k: View the phonebook entry.
− {>} REDIAL: View the redial list.
− {V} CID (Caller ID): View the caller list.
Base unit:
− {^}, {V}, {7}, or {8}: Scroll through various lists and items.
− VOL. (Volume: {^} or {V}): Adjust the receiver or speaker volume while talking.
− {7}/{8}: Repeat/skip messages during playback.
Handset Base unit
1
2
{V}
{^}
{<}{>}
{V}
{^}
{7}
{8}
TGF38x(en)_QG.fm Page 2 Thursday, November 27, 2014 2:25 PM
– 3 –
Date and time (Handset/Base unit)
1 {MENU}(1)1
2 Enter the current month, date, and year. s {OK}
3 Enter the current hour and minute (12-hour clock format).
4 Proceed with the operation for your unit.
Handset: *: Select “AM” or “PM”. s {SAVE}
Base unit: {AM/PM}: Select “AM” or “PM”. s {SAVE}
5 Proceed with the operation for your unit.
Handset: {OFF}
Base unit: {EXIT}
Recording your greeting message of the answering system for the
landline (Handset/Base unit)
You can record your own greeting message instead of using a pre-recorded greeting message.
1 {MENU}(3)2 s {r}: “Yes” s {SELECT}
2 After a beep sounds, speak clearly about 20 cm (8 inches) away from the microphone (2 minutes max.).
3 Press {STOP} to stop recording.
4 Proceed with the operation for your unit.
Handset: {OFF}
Base unit: {EXIT}
Link to cell
You can connect your base unit and cellular phone using Bluetooth
®
wireless technology, so that you can
make or answer cellular calls using your phone system. For more details, please visit our Web site:
www.panasonic.com/link2cell
LLocate your cellular phone near the base unit. If the cellular phone is too close to the base unit during a
cellular call, you may hear noise. For best performance, we recommend placing the cellular phone
between 0.6 m to 3 m (2 feet to 10 feet) away from the base unit.
1 Cell line
2 Cell phone service providers
Trademarks
LThe Bluetooth
®
word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any
use of such marks by Panasonic Corporation is under license.
LAll other trademarks identified herein are the property of their respective owners.
1
2
TGF38x(en)_QG.fm Page 3 Thursday, November 27, 2014 2:25 PM
Loading...