Panasonic AN7510, AN7523, AN7522, AN7513S, AN7513 Datasheet

New

BTL Audio Power IC AN7510/7520 Series

■ Overview

The AN7510/7520 series is a 0.5W to 3W BTL audio power amplifier IC. Equipped with a standby function and mute or DC volume circuit, the series includes a lineup of single and dual output models. With simplified set design due to minimum external components, this IC has a wide variety of applications.

■ Features

•Operating power sourcs voltage: 3.0V to 13.5V.

•Built-in standby function.

•Built-in mute or DC volume circuit.

■ Specifications

	Parameters	Output	Vcc	Load	Standby	Mute	Volume	Package
Product		power		resistance
name
	AN7510S	0.5W×2ch	5V	16Ω				SOP-16pin
	AN7511S	0.5W×1ch	5V	16Ω				SOP-8pin
	AN7512S	0.5W×2ch	5V	16Ω				SOP-16pin
	AN7513S	0.5W×1ch	5V	16Ω				SOP-8pin
	AN7510	1.0W×2ch	5V	8Ω				HDIP-16pin
	AN7511	1.0W×1ch	5V	8Ω				DIP-8pin
	AN7512	1.0W×2ch	5V	8Ω				HDIP-16pin
	AN7513	1.0W×1ch	5V	8Ω				DIP-8pin
*	AN7520	3.0W×2ch	8V	8Ω				HSIP-12pin
*	AN7521	3.0W×1ch	8V	8Ω				HSIP-9pin
	AN7522	3.0W×2ch	8V	8Ω				HSIP-12pin
	AN7523	3.0W×1ch	8V	8Ω				HSIP-9pin

*: Planned

■Applications

●TVs ● Audio equipment ● Personal computers ● Active speakers

¶ The products and specifications are subject to change without any notice. Please ask for the latest product standards to guarantee the satisfaction of your product requirements.

Matsushita Electronics Corporation

1 Kotari Yakemachi, Nagaokakyo, Kyoto, 617-8520 Japan	Tel. [phone]	http://www.mec.panasonic.co.jp
		New publication, effective from Jan. 13 1999.

AN7510, AN7510S	AN7510											Unit : mm
Dual 0.5,1W BTL Audio Power Amplifier Circuit								6.35±0.3		4.7±0.25			±0.25
											1.06±0.25		3.05
						1				16		0.5±0.1
			27.4±0.3		21.6±0.3	2				15				1.2±0.25
						3				14
						4				13
						5				12
						6				11
■ Features				1.7		7				10			5.08±0.1	2.54±2.54
										3.80±0.3
						8				9
								17		1.5±0.1
• AN7510: Vcc=5V,Output=1W(8Ω)						φ2.1
• AN7510S:Vcc=5V,Output=0.5W(16Ω)											0.5±0.1
• Built-in Standby function.			0 to 6								0.45+0.1–0.05
• Built-in Mute circuits.
			7.62±0.25
							HDIP016-P-0300
■ Applications	AN7510S											Unit : mm
• TVs, Audio equipment, Personal computers,Active speakers
	16	15	14	13	12		11	10	9
	1	2	3	4		5	6	7	8	0.1±0.1					0.2–0.05	0.9±0.250.9±0.25	2.05±0.2
	(0.4) 0.4±0.25					1.27								+0.1
			10.09±0.3							(0.4)	5.5±0.3
											7.6±0.3
■ Block Diagram								SOP016-P-0300

				N.C.	N.C.	N.C.	N.C.
				1	7	9	16
	12		Ripple				2
VCC			Rejection					Standby
			Circuit
	Attenuator			Attenuator
ch.1 Output	13						11	ch.2 Output
			Thermal
	28dB		Shutdown				28dB
ch.1 Output	15	Attenuator					8	ch.2 Output
			control
GND	14						10	GND
(ch.1 Output)	28dB						28dB	(ch.2 Output)
	3	4	5	6
	Input	GND	Mute	Input
	ch.1			ch.2

AN7510,7510S

■ Pin Descriptions

Pin No.	Function	Pin No.	Function
1	N.C	9	N.C
2	Standby	10	GND(Output ch2)
3	ch1 Input	11	ch2 Output(+)
4	GND(Input)	12	Vcc
5	Mute	13	ch1 Output(+)
6	ch2 Input	14	GND(Output ch1)
7	N.C	15	ch1 Output(-)
8	ch2 Output(-)	16	N.C

■ Absolute Maximum Ratings

	Parameter	Symbol		Ratio	Unit	Note
	Storage temperature	Tstg	AN7510	-55 to +150	ºC	1
			AN7510S	-55 to +125
	Operating ambient temperature	Topr		-25 to +70	ºC	1
	Supply voltage	Vcc		14	V	2
	Supply current	Icc		2.0	A
	Power dissipation	PD	AN7510	1127	mW	Ta=70ºC
			AN7510S	236

Note1) Ta=25ºC except storage temperature and operating ambient temperature.

Note2) At no-signal.

■ Operating Supply Voltage Range

	Operating supply voltage range	Vcc		3.5V to 13.5V

AN7510,7510S

■ Electrical Characteristics (Vcc=5.0V,RL=8Ω,freq=1kHz,Ta=25ºC±2 ºC)

	Parameter	Symbol	Condition	min.	typ.	max.	Unit	Note
	Quiescent current	ICQ	VIN=0mV	–	50	100	mA
	Standby current	ISTB	VIN=0mV	–	1	10	µA
	Output noise voltage	VNO	Rg=10kΩ	–	0.14	0.4	mVrms	1
	Voltage gain	GV	PO=0.25W	32	34	36	dB
	Total harmonic distortion	THD	PO=0.25W	–	0.05	0.5	%
	Maximum power output	PO	THD=10%	0.8	1.1	–	W
	Ripple rejection ratio	RR	Rg=10kΩ	30	50	–	dB	1
			Vr=1Vrms,fr=120Hz
	Output offset voltage	Voff	Rg=10kΩ	-300	0	300	mV
	Muting effect	MT	PO=0.25W	70	86	–	dB	1
	Channel balance	CB	PO=0.25W	-1	0	1	dB
	Channel crosstalk	CT	PO=0.25W	55	65	–	dB

Note1) For this measurement,use the filter <Bandwidth:15Hz to 30kHz(12dB/octave)>

■ Application Circuit

		Out1				Out2
		8Ω		VCC		8Ω
16	15	14	13	12	11	10	9

1	2		3	4	5		6	7	8
	10µF	68kΩ	270kΩ	10kΩ	1.0µF	47kΩ	100kΩ	10kΩ

Standby	VIN1	Mute	VIN2

AN7510,7510S

■ Characteristic Curve(AN7510)
				PO - VCC
	8
	7
(W)	6
	5
O
P					ch.2		ch.1
Power
	4
							freq=1kHz
							THD=10%
Output	3
							RL=8Ω
							400Hz HPF
	2						30kHz LPF
							2-ch Input
	1						Rg=10kΩ
							VSTB=5V
	0						VMUTE=0V
	0	2	4	6	8	10	12	14

Supply Voltage VCC (V)

PO,THD - VIN

	10			100
			PO(ch.1),PO(ch.2)
					(%)
(W)	1			10	THD
O					Harmonic Distortion
Output Power P	0.1		VCC=5V	1
		THD(10kHz)	freq=1kHz
			RL=8Ω
			400Hz HPF
	0.01		30kHz LPF	0.1
			2-ch Input		Total
		THD(1kHz)	Rg=10kΩ
			VSTB=5V
			VMUTE=0V
	0.001			0.01
	1	10	100	1000

Input Voltage VIN (mVrms)

■ Package Power Dissipation

	2000
	1800	1
(mW)	1600
	1400
D	1200
P
Dissipation	1000
	800	2
Power	600	3
	400
	200
	0
	0	25	50	75	100	125	150
		Ambient Temperature				Ta (°C)
	1) AN7510:Rthj-a=71°C/W,PD=1761mW(25°C)
	2) AN7510S:Rthj-a=127°C/W,PD=787mW(25°C)
			Glass epoxy PCB(75mm×75mm×t0.8mm)
	3) AN7510S:Rthj-a=233°C/W,PD=429mW(25°C)

■ Printed Board Circuit Layout

ch.2 Out−
ch.2 Out+
ch.1 Out+
ch.1 Out−
VCC	16	15	14	13	12	11	10	9	TAB
GND
	1	2	3	4	5	6	7	8	TAB
									GND(Input)
									VIN(ch.2)
									Mute/Volume
									VIN(ch.1)
									Standby

AN7511, AN7511S					AN7511					Unit : mm
0.5,1W BTL Audio Power Amplifier Circuit										0.9		1.0
						1		8
					9.2±0.2
										0.5	2.54	1.5
											1.3
						4		5
										0.3±0.26
■ Features							6.4±0.2			3.89±0.2
								3.35±0.2
• AN7511: Vcc=5V,Output=1W(8Ω)
• AN7511S:Vcc=5V,Output=0.5W(16Ω)
• Built-in Standby function.								0.3		+0.1
							7.62±0.3			–0.05
• Built-in Mute circuits.					0˚ to 15˚
							DIP008-P-0300
■ Applications					AN7511S					Unit : mm
• TVs, Audio equipment, Personal computers,Active speakers							5.01±0.20
						8	5
								4.30±0.20 6.40±0.20		(1.05)
										.
										0 5
										1 0
										. .
										0 0
										+ –
										5
										1
										0
										0 to 10
										0.50±0.20
						1	4
									1.45±0.10 1.75max.
					(0.60)		1.27	+0.10	±0.10
								0.40 –0.05	0.10
							0.10
							SEATING PLANE
■ Block Diagram							SOP008-P-0225C
VCC	5			Ripple	1
				Rejection		Standby
				Circuit
		Attenuator
Output	6
				Thermal
		28dB		Shutdown
Output	8		Attenuator
				control
GND Output	7	28dB
		2	3	4
		Input	GND	Mute

AN7511,7511S

■ Pin Descriptions

Pin No.	Function
1	Standby
2	ch1 Input
3	GND(Input)
4	Mute
5	Vcc
6	ch1 Output(+)
7	GND(Output1)
8	ch1 Output(-)

■ Absolute Maximum Ratings

	Parameter	Symbol		Ratio	Unit	Note
	Storage temperature	Tstg		-55 to +150	ºC	1
	Operating ambient temperature	Topr		-25 to +70	ºC	1
	Supply voltage	Vcc		14	V	2
	Supply current	Icc		1.0	A
	Power dissipation	PD	AN7511	541	mW	Ta=70ºC
			AN7511S	245

Note1) Ta=25ºC except storage temperature and operating ambient temperature.

Note2) At no-signal.

■ Operating Supply Voltage Range

	Operating supply voltage range	Vcc		3.5V to 13.5V

AN7511,7511S

■ Electrical Characteristics (Vcc=5.0V,RL=8Ω,freq=1kHz,Ta=25ºC±2 ºC)

	Parameter	Symbol	Condition	min.	typ.	max.	Unit	Note
	Quiescent current	ICQ	VIN=0mV	–	30	60	mA
	Standby current	ISTB	VIN=0mV	–	1	10	µA
	Output noise voltage	VNO	Rg=10kΩ	–	0.14	0.4	mVrms	1
	Voltage gain	GV	PO=0.25W	32	34	36	dB
	Total harmonic distortion	THD	PO=0.25W	–	0.05	0.5	%
	Maximum power output	PO	THD=10%	0.8	1.1	–	W
	Ripple rejection ratio	RR	Rg=10kΩ	30	50	–	dB	1
			Vr=1Vrms,fr=120Hz
	Output offset voltage	Voff	Rg=10kΩ	-300	0	300	mV
	Muting effect	MT	PO=0.25W	70	86	–	dB	1

Note1) For this measurement,use the filter <Bandwidth:15Hz to 30kHz(12dB/octave)>

■ Application Circuit

	Out1
	8Ω		VCC
8	7	6	5

	1	2	3		4
10µF	68kΩ	270kΩ	10kΩ	1.0µF	47kΩ	100kΩ
	Standby	VIN1			Mute