RUGGED SOLID STATE TRANSDUCERS
WITH AMPLIFIED OUTPUTS |
|
SIVE! |
STANDARD AND METRIC MODELS |
EX |
|
|
CLU |
|
PX209 Series
able style.
0-15 to 0-300 psi-Standard Units 0-1 to 0-20 bar-Metric Units Gage, Absolute, and
Compound Ranges
Starts at
$215
PX209-100G5V, $215, shown actual size.
Based on proprietary solid state sensor technology originally used in aerospace applications.
Connector included.
Standard
Stainless Steel Fitting and Body
5-Point NIST-Traceable Calibration Included
Solid State Media Isolation (Suitable for Use with Many Industrial Liquids and Gases)
Broad TemperatureCompensated Range of -20 to 80°C
(-4 to 176ºF) Yields High Stability with Changing Temperatures
Electrical Isolation to 100 MΩ Ensures Long-
Term Reliability
Rugged High Shock and Vibration Design for Tough OEM Applications
100,000 Hr MTBF Typical
Based on proprietary sensor technology developed by OMEGA to meet the high reliability and accuracy demanded by aerospace applications, the PX209/PXM209 Series voltage and current output pressure transducer offers superior performance in non-corrosive applications, including: engine/powertrain testing, well monitoring, and ground and race water monitoring. The transducer uses a 4-active-arm bridge sensor
PX219-100G5V,
$215, shown
actual size. mini DIN style.
with a micro-machined diffused silicon diaphragm and proprietary thin-film media, plus dielectric isolation barriers.
This same core sensing element technology, which includes multiple types of signal conditioning and the ability to survive extremes of shock and vibration, provides a modular building block for OMEGA’s revolutionary family of pressure-sensing instruments.
SPECIFICATIONS
Voltage Output
Excitation: 24 Vdc @ 15 mA
5 Vdc Output: 7 to 35 Vdc
10 Vdc Output: 12 to 35 Vdc
Output: 0 to 5 Vdc or 0 to 10 Vdc, ±1.5% FSO, 3-wire
Zero Balance: 0 Vdc ±2% FSO
4 to 20 mA Output
Excitation: 24 Vdc (7 to 35 Vdc) reverse polarity protected
Output: 4 to 20 mA (2-wire) ±1% FSO
Zero Balance: 4 mA ±2% FSO
Max Loop Resistance:
50 x (supply voltage - 10) Ω
B-90
Common Specifications
Accuracy: 0.25% FS (including linearity, hysteresis and repeatability)
Operating Temperature:
-54 to 121°C (-65 to 250°F)
Compensated Temperature:
-20 to 80°C (-4 to 176°F)
Thermal Effects:
0.04% FS/°C (0.02% FS/°F)
Proof Pressure: 150%
Burst Pressure: 300% range max Response Time: 2 ms typical
Vibration Sensitivity: At 20 g peak sinusoidal vibration from
10 Hz to 2000 Hz (1⁄2" D.A.), the output shall not exceed 0.04% FS/g for 15 psi range to 0.005% FS/g for 100 psi and above
Natural Frequency: >35 kHz for 100 psi range
Gage Type: Diffused silicon strain gages
Wetted Parts: 316 SS, borosilicate glass, silicon nitride, epoxy
Pressure Port: See dimensional drawing on page B-150
Electrical Connections:
PX209/PXM209: 1 m (36") shielded 4-conductor cable
PX219/PXM219: DIN 40050 plug connector supplied
Weight: 128 g (4.5 oz)
OUTPUT VOLTAGE TRANSDUCERS PRESSURE
B
STANDARD MODELS |
|
|
|
|
AVAILABLE FOR FAST DELIVERY! |
|
|||
|
To Order (Specify Model Number) |
|
|
|
|
|
|
||
|
psi |
bar |
CABLE STYLE |
PRICE |
|
CONN. STYLE |
PRICE |
COMPATIBLE METERS* |
|
|
GAGE PRESSURE RANGES (psig) WITH 0 TO 5 Vdc OUTPUT |
|
|
|
|
||||
|
0 to 15 |
0 to 1.0 |
PX209-015G5V |
$215 |
|
PX219-015G5V |
$215 |
DPi8, DP41-E, DP25B-E |
|
|
0 to 30 |
0 to 2.1 |
PX209-030G5V |
215 |
|
PX219-030G5V |
215 |
DPi8, DP41-E, DP25B-E |
|
|
|
||||||||
|
0 to 60 |
0 to 4.1 |
PX209-060G5V |
215 |
|
PX219-060G5V |
215 |
DPi8, DP41-E, DP25B-E |
|
|
0 to 100 |
0 to 6.9 |
PX209-100G5V |
215 |
|
PX219-100G5V |
215 |
DPi8, DP41-E, DP25B-E |
|
|
0 to 200 |
0 to 13.8 |
PX209-200G5V |
215 |
|
PX219-200G5V |
215 |
DPi8, DP41-E, DP25B-E |
|
|
0 to 300 |
0 to 20.7 |
PX209-300G5V |
215 |
|
PX219-300G5V |
215 |
DPi8, DP41-E, DP25B-E |
|
|
ABSOLUTE PRESSURE RANGES (psia) WITH 0 TO 5 Vdc OUTPUT |
|
|
|
|||||
|
0 to 15 |
0 to 1.0 |
PX209-015A5V |
$235 |
|
PX219-015A5V |
$235 |
DPi8, DP41-E, DP25B-E |
|
|
|
|
|
|
|
|
|
|
|
|
0 to 30 |
0 to 2.1 |
PX209-030A5V |
235 |
|
PX219-030A5V |
235 |
DPi8, DP41-E, DP25B-E |
|
|
0 to 60 |
0 to 4.1 |
PX209-060A5V |
235 |
|
PX219-060A5V |
235 |
DPi8, DP41-E, DP25B-E |
|
|
0 to 100 |
0 to 6.9 |
PX209-100A5V |
235 |
|
PX219-100A5V |
235 |
DPi8, DP41-E, DP25B-E |
|
|
0 to 200 |
0 to 13.8 |
PX209-200A5V |
235 |
|
PX219-200A5V |
235 |
DPi8, DP41-E, DP25B-E |
|
|
0 to 300 |
0 to 20.7 |
PX209-300A5V |
235 |
|
PX219-300A5V |
235 |
DPi8, DP41-E, DP25B-E |
|
|
VACUUM AND COMPOUND RANGES WITH 0 TO 5 Vdc OUTPUT |
|
|
|
|||||
|
-14.7 to 0 |
-1 to 0 |
PX209-30VAC5V |
$235 |
|
PX219-30VAC5V |
$235 |
DPi8, DP41-E, DP25B-E |
|
|
-14.7 to 15 |
-1 to 1.0 |
PX209-30V15G5V |
235 |
|
PX219-30V15G5V |
235 |
DPi8, DP41-E, DP25B-E |
|
|
-14.7 to 45 |
-1 to 3.1 |
PX209-30V45G5V |
235 |
|
PX219-30V45G5V |
235 |
DPi8, DP41-E, DP25B-E |
|
|
-14.7 to 85 |
-1 to 5.9 |
PX209-30V85G5V |
235 |
|
PX219-30V85G5V |
235 |
DPi8, DP41-E, DP25B-E |
|
|
-14.7 to 135 |
-1 to 9.3 |
PX209-30V135G5V |
235 |
|
PX219-30V135G5V |
235 |
DPi8, DP41-E, DP25B-E |
|
|
|
|
|
|
|
|
|
|
|
Comes complete with 5-point NIST calibration certificate.
See pages B-149 and B-150 for PX209 units with 4 to 20 mA output.
Note: To order 0 to 10 Vdc output, replace “5V” suffix with “10V” (no extra charge).
Ordering Example: PX219-015G5V, 0 to 5 Vdc output transducer for gage pressure with a 0 to 15 psia range, PS-4G snubber for gasses and TX4-100 shielded wire, $215 + 12.75 + 35.00 = $262.75.
STANDARD ACCESSORIES
MODEL |
|
PRICE |
DESCRIPTION |
|
PS-4G |
|
$12.75 |
1⁄4 NPT pressure |
|
|
|
|
|
snubber for |
|
|
|
|
gaseous media |
PS-4E |
|
12.75 |
1⁄4 NPT pressure |
|
|
|
|
|
snubber for water |
|
|
|
|
and light oils |
PS-4D |
|
12.75 |
1⁄4 NPT pressure |
|
|
|
|
|
snubber for |
|
|
|
|
dense liquids |
|
|
|
|
(motor oil) |
TX4-100 |
|
35.00 |
30 m (100') of |
|
|
|
|
|
4-conductor |
|
|
|
|
shielded wire |
METRIC ACCESSORIES |
||||
MODEL |
|
PRICE |
DESCRIPTION |
|
PS-4G-MG |
|
$12.75 |
G1⁄4 pressure |
|
|
|
|
|
snubber for |
|
|
|
|
gaseous media |
PS-4E-MG |
|
12.75 |
G1⁄4 pressure |
|
|
|
|
|
snubber for water |
|
|
|
|
and light oils |
PS-4D-MG |
|
12.75 |
G1⁄4 pressure |
|
|
|
|
|
snubber for |
|
|
|
|
dense liquids |
|
|
|
|
(motor oil) |
TX4-100 |
|
35.00 |
30 m (100') of |
|
|
|
|
|
4-conductor |
|
|
|
|
shielded wire |
Order a snubber to protect your pressure transducer!
PS-4G, $12.75, shown smaller than actual size.
METRIC MODELS AVAILABLE FOR FAST DELIVERY!
To Order (Specify PXM209 for Cable or PXM219 for DIN Connector)
bar |
psi |
CABLE STYLE |
PRICE |
CONN. STYLE |
PRICE |
COMPATIBLE METERS* |
GAGE |
PRESSURE RANGES (bar) WITH 0 to 10 |
Vdc OUTPUT |
|
|
||
0 to 1.0 |
0 to 15 |
PXM209-001G10V |
$215 |
PXM219-001G10V |
$215 |
DPi8, DP41-E, DP25B-E |
0 to 1.6 |
0 to 23 |
PXM209-1.60G10V |
215 |
PXM219-1.60G10V |
215 |
DPi8, DP41-E, DP25B-E |
0 to 2.5 |
0 to 36 |
PXM209-2.50G10V |
215 |
PXM219-2.50G10V |
215 |
DPi8, DP41-E, DP25B-E |
0 to 4.0 |
0 to 58 |
PXM209-004G10V |
215 |
PXM219-004G10V |
215 |
DPi8, DP41-E, DP25B-E |
0 to 6.0 |
0 to 87 |
PXM209-006G10V |
215 |
PXM219-006G10V |
215 |
DPi8, DP41-E, DP25B-E |
0 to 10.0 |
0 to 145 |
PXM209-010G10V |
215 |
PXM219-010G10V |
215 |
DPi8, DP41-E, DP25B-E |
0 to 16.0 |
0 to 232 |
PXM209-016G10V |
215 |
PXM219-016G10V |
215 |
DPi8, DP41-E, DP25B-E |
0 to 20.0 |
0 to 290 |
PXM209-020G10V |
215 |
PXM219-020G10V |
215 |
DPi8, DP41-E, DP25B-E |
ABSOLUTE PRESSURE RANGES (bar) WITH 0 to 10 Vdc OUTPUT |
|
|
||||
0 to 1.0 |
0 to 15 |
PXM209-001A10V |
$235 |
PXM219-001A10V |
$235 |
DPi8, DP41-E, DP25B-E |
0 to 1.6 |
0 to 23 |
PXM209-1.60A10V |
235 |
PXM219-1.60A10V |
235 |
DPi8, DP41-E, DP25B-E |
0 to 2.5 |
0 to 36 |
PXM209-2.50A10V |
235 |
PXM219-2.50A10V |
235 |
DPi8, DP41-E, DP25B-E |
0 to 4.0 |
0 to 58 |
PXM209-004A10V |
235 |
PXM219-004A10V |
235 |
DPi8, DP41-E, DP25B-E |
0 to 6.0 |
0 to 87 |
PXM209-006A10V |
235 |
PXM219-006A10V |
235 |
DPi8, DP41-E, DP25B-E |
0 to 10.0 |
0 to 145 |
PXM209-010A10V |
235 |
PXM219-010A10V |
235 |
DPi8, DP41-E, DP25B-E |
0 to 16.0 |
0 to 232 |
PXM209-016A10V |
235 |
PXM219-016A10V |
235 |
DPi8, DP41-E, DP25B-E |
0 to 20.0 |
0 to 290 |
PXM209-020A10V |
235 |
PXM219-020A10V |
235 |
DPi8, DP41-E, DP25B-E |
VACUUM AND COMPOUND RANGES (bar) WITH 0 to 10 Vdc OUTPUT |
|
|||||
VAC to 0 |
VAC to 0 |
PXM209-VAC000G10V |
$235 |
PXM219-VAC000G10V |
$235 |
DPi8, DP41-E, DP25B-E |
VAC to 1 |
VAC to 15 |
PXM209-VAC001G10V |
235 |
PXM219-VAC001G10V |
235 |
DPi8, DP41-E, DP25B-E |
VAC to 3 |
VAC to 45 |
PXM209-VAC003G10V |
235 |
PXM219-VAC003G10V |
235 |
DPi8, DP41-E, DP25B-E |
VAC to 6 |
VAC to 87 |
PXM209-VAC006G10V |
235 |
PXM219-VAC006G10V |
235 |
DPi8, DP41-E, DP25B-E |
VAC to 9 |
VAC to 131 |
PXM209-VAC009G10V |
235 |
PXM219-VAC009G10V |
235 |
DPi8, DP41-E, DP25B-E |
|
|
|
|
|
|
|
Comes complete with 5-point calibration. |
* See section D for compatible meters. |
Note: The voltage output versions of the vacuum and compound sensors generate 0 Vdc at vacuum and 5Vdc or 10 Vdc at full scale.
Ordering Example: PXM219-001G10V, 0 to 10 Vdc output transducer for gage pressure with
a 0 to 1 bar range, PS-4G-MG snubber and TX4-100 shielded wire, $215 + 12.75 + 35 = $262.75.
B-92