Easy-To-Use Surface RTD
Offers Flexible Surface
Measurement Solutions
SA1-RTD-B Series
Package of 3
ACCURACY |
IEC CLASS |
(±0.30ºC @ 0ºC) B |
SA1-RTD-B shown actual size.
U100 Ω Thin Film DIN Platinum Class “B”
(±0.12% at 0°C) Accuracy Standard
USilicone Adhesive Rated to 260°C (500°F)
UTemperature Range: -73 to 260°C
(-99 to 500°F) Continuous, 290°C (554°F) Short Term Operation When Installed with OMEGABOND® Air Set Cements
UStocked in 1 m (40") Lengths
U3 Wire Construction Standard, Color Code Per IEC-60751 and ASTM-E-1137
UResponse Time: Less than 0.9 sec (63% Response in Water Flowing at 3' Per Second); Less Than 2 Seconds On a Hot Plate
USold in Convenient 3-Packs
To Order Visit omega.com/sa1-rtd-b for Pricing and Details
Model Number* |
Resistance |
No. of Wires |
Wire Length |
SA1-RTD-B |
100.00 Ω ±0.12% @ 0ºC |
3 |
1 m (40") |
SA1-RTD-B-80 |
100.00 Ω ±0.12% @ 0ºC |
3 |
2 m (80") |
SA1-RTD-B-120 |
100.00 Ω ±0.12% @ 0ºC |
3 |
3 m (120") |
SA1-RTD-B-MTP |
100.00 Ω ±0.12% @ 0ºC |
3 |
1 m (40") with MTP connectors |
SA1-RTD-B-80-MTP |
100.00 Ω ±0.12% @ 0ºC |
3 |
2 m (80") with MTP connectors |
SA1-RTD-B-120-MTP |
100.00 Ω ±0.12% @ 0ºC |
3 |
3 m (120") with MTP connectors |
Options: For 2-wire styles insert “-2W” after “B” in the part number and subtract the cost per pack. For a standard size 3-pin connector, replace “-MTP” in the model number with “-OTP”, no additional cost. For an audio connector termination, replace “-MTP” with “-TA3F” for an
additional cost per pack. For lead wire longer than 120", change suffix to desired length and add cost per additional 12" per pack.
Ordering Examples: SA1-RTD-B-80-MTP, SA1-RTD sensor 80" long with MTP connectors, 3-pack.
SA1-RTD-B-TA3F, SA1-RTD sensor 40" long with TA3F connector.
C-75
Loading...