Kenwood KMM-202, KMM-102 Manual

0 (0)

KMM-202

KMM-102

DIGITAL MEDIA RECEIVER

INSTRUCTION MANUAL

“Made for iPod,” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod, or iPhone, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod or iPhone may affect wireless performance.

iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries.

Lightning is a trademark of Apple Inc.

Android is trademark of Google Inc.

Pandora, the Pandora logo, and the Pandora trade dress are trademarks or registered trademarks of Pandora Media, Inc., used with permission.

© 2015 JVC KENWOOD Corporation

B5A-0896-00 (MN)

CONTENTS

BEFORE USE

2

BASICS

3

 

 

GETTING STARTED

4

1Select the display language and cancel the demonstration

2 Set the clock and date

3 Set the initial settings

RADIO

 

5

USB / iPod / ANDROID

 

7

 

 

 

 

 

Pandora® (for

 

 

)

9

 

 

 

 

 

 

 

AUX

 

10

 

 

 

 

 

AUDIO SETTINGS

 

11

 

 

 

 

 

DISPLAY SETTINGS

 

12

 

 

 

 

 

TROUBLESHOOTING

 

12

 

 

 

 

 

REFERENCES

 

14

Maintenance

 

 

More information

 

 

 

 

 

 

 

INSTALLATION /

 

 

CONNECTION

 

15

 

 

 

 

 

SPECIFICATIONS

 

18

BEFORE USE

IMPORTANT

To ensure proper use, please read through this manual before using this product. It is especially important that you read and observe Warning and Caution in this manual.

Please keep the manual in a safe and accessible place for future reference.

Warning

Do not operate any function that takes your attention away from safe driving.

Caution

Volume setting:

Adjust the volume so that you can hear sounds outside the car to prevent accidents.

Lower the volume before playing digital sources to avoid damaging the speakers by the sudden increase of the output level.

General:

Avoid using the external device if it might hinder safe driving.

Make sure all important data has been backed up. We shall bear no responsibility for any loss of recorded data.

Never put or leave any metallic objects (such as coins or metal tools) inside the unit to prevent a short circuit.

Depending on the types of cars, the antenna will automatically extend when you turn on the unit with the antenna control wire connected ( 17). Turn off the unit or change the source to STANDBY when parking at a low ceiling area.

Remote control (RC-406):

Do not leave the remote control in hot places such as on the dashboard.

The Lithium battery is in danger of explosion if replaced incorrectly. Replace it only with the same or equivalent type.

The battery pack or batteries shall not be exposed to excessive heat such as sunshine, fire or the like.

Keep the battery out of reach of children and in its original packaging when not in used. Dispose of used batteries promptly. If swallowed, contact a physician immediately.

How to read this manual

Operations are explained mainly using buttons on the faceplate of .

English indications are used for the purpose of explanation. You can select the display language from the [FUNCTION] menu. ( 5)

[XX] indicates the selected items.

( XX) indicates references are available on the stated page.

2

Kenwood KMM-202, KMM-102 Manual

BASICS

 

 

Faceplate

 

Remote control (RC-406)

Volume knob

Display window

Remote sensor (Do not expose

to bright sunlight.)

 

 

 

 

Pull out the

 

 

insulation sheet

 

 

when using for the

 

 

first time.

Detach button

* Not used

Attach

Detach

How to reset

How to replace the battery

Your preset adjustments will be erased except stored radio stations.

To

On the faceplate

On the remote control

 

Turn on the power

Press

.

Press and hold SRC to turn off the power.

 

• Press and hold to turn off the power.

( Pressing SRC does not turn on the power. )

 

 

 

 

 

Adjust the volume

Turn the volume knob.

Press

or

.

 

 

 

 

 

 

Press ATT during playback to attenuate the sound.

• Press again to cancel.

Select a source

Press

repeatedly.

Press SRC repeatedly.

Change the display information

Press DISP repeatedly. ( 15)

( Not available )

 

 

 

 

ENGLISH 3

GETTING STARTED

1Select the display language and cancel the demonstration

When you turn on the power (or after you reset the unit), the display shows: “SEL LANGUAGE” “PRESS” “VOLUME KNOB”

1Turn the volume knob to select [ENG] (English) or [TUR] (Turkish), then press the knob.

[ENG] is selected for the initial setup.

Then, the display shows: “CANCEL DEMO” “PRESS” “VOLUME KNOB”.

2Press the volume knob.

[YES] is selected for the initial setup.

3Press the volume knob again.

“DEMO OFF” appears.

2Set the clock and date

1 Press the volume knob to enter [FUNCTION].

2 Turn the volume knob to select [CLOCK], then press the knob.

To adjust the clock

3 Turn the volume knob to select [CLOCK ADJUST], then press the knob.

4Turn the volume knob to make the settings, then press the knob.

Hour Minute

5 Turn the volume knob to select [CLOCK FORMAT], then press the knob. 6 Turn the volume knob to select [12H] or [24H], then press the knob.

To set the date

7Turn the volume knob to select [DATE FORMAT], then press the knob.

8Turn the volume knob to select [DD/MM/YY] or [MM/DD/YY], then press the knob.

9 Turn the volume knob to select [DATE SET], then press the knob.

10Turn the volume knob to make the settings, then press the knob.

Day Month Year or Month Day Year

11Press and hold to exit.

To return to the previous setting item, press .

3Set the initial settings

1 Press repeatedly to enter STANDBY.

2Press the volume knob to enter [FUNCTION].

• Pressing AUD enters [AUDIO CONTROL] directly.

3Turn the volume knob to select an item (see the following table), then press the knob.

4 Repeat step 3 until the desired item is selected or activated. 5 Press and hold to exit.

To return to the previous setting item, press .

 

 

Default: XX

AUDIO CONTROL

 

 

SWITCH

REAR/ SUB-W: Selects whether rear speakers or a subwoofer are

 

PREOUT

connected to the line out terminals on the rear (through an external

 

 

amplifier).

 

 

 

 

SP SELECT

OFF/ 5/4/ 6 × 9/6/ OEM: Selects according to the speaker size

 

 

(5 inches or 4 inches, 6×9 inches or 6 inches) or OEM speakers for

 

 

optimum performance.

 

 

 

4

GETTING STARTED

 

RADIO

TUNER SETTING

 

PRESET TYPE

NORMAL: Memorizes one station for each preset button in each band

 

 

 

 

( 5, RADIO). ; MIX: Memorizes one station for each preset button,

 

 

 

 

regardless of the selected band.

 

 

 

 

 

 

 

SYSTEM

 

 

 

 

 

 

 

 

 

 

 

KEY BEEP

ON: Activates the keypress tone. ; OFF: Deactivates.

 

 

 

 

 

 

 

 

TDF ALARM

ON: Activates the alarm if you forget to detach the faceplate when ACC

 

 

 

 

is set to OFF. ; OFF: Deactivates.

 

 

 

 

 

 

 

 

SOURCE SELECT

 

 

 

 

 

 

 

 

 

 

 

 

PANDORA SRC

(For

 

)

 

 

 

 

 

 

 

ON: Enables PANDORA in source selection. ; OFF: Disables. ( 9)

 

 

 

 

 

 

 

 

 

BUILT-IN AUX

ON: Enables AUX in source selection. ; OFF: Disables. ( 10)

 

 

 

 

 

 

 

 

F/W UPDATE

 

 

 

 

 

 

 

 

 

 

 

 

UPDATE SYSTEM

 

 

 

 

 

 

 

 

 

 

 

 

 

F/W UP xx.xx

YES: Starts upgrading the firmware. ; NO: Cancels (upgrading is not

 

 

 

 

activated).

 

 

 

 

 

For details on how to update the firmware, see:

 

 

 

 

www.kenwood.com/cs/ce/

CLOCK

 

 

 

 

 

 

 

 

 

CLOCK DISPLAY

ON: The clock time is shown on the display even when the unit is

 

 

 

 

turned off. ; OFF: Cancels.

 

 

 

 

 

 

 

ENGLISH

Select the display language for [FUNCTION] menu and music

 

 

 

 

information if applicable.

 

 

 

 

TURKCE

By default, [ENGLISH] is selected.

 

Supported band: FM1/ FM2/ FM3/ AM/ SW1/ SW2

Search for a station

1 Press repeatedly to select TUNER.

2Press repeatedly (or presson RC-406) to select the band.

3Press (or press on RC-406) to search for a station.

To change the searching method for : Press repeatedly.

AUTO1 : Automatically search for a station. AUTO2 : Search for a preset station. MANUAL : Manually search for a station.

To store a station: Press and hold one of the number buttons (1 to 6).

To select a stored station: Press one of the number buttons (1 to 6) (or press one of the number buttons (1 to 6) on RC-406).

Direct Access Tuning (using RC-406)

1 Press DIRECT to enter Direct Access Tuning.

2 Press the number buttons to enter a frequency.

3Press to search for a station.

To cancel, press or DIRECT.

If no operation is done for 10 seconds after step 2, Direct Access Tuning is automatically canceled.

ENGLISH 5

RADIO

Other settings

1 Press the volume knob to enter [FUNCTION].

2Turn the volume knob to select an item (see the following table), then press the knob.

3 Repeat step 2 until the desired item is selected or activated. 4 Press and hold to exit.

To return to the previous setting item, press .

Default: XX

TUNER SETTING

 

LOCAL SEEK

ON: Searches only AM/ SW1/ SW2 stations with good reception. ; OFF: Cancels.

 

 

• Settings made are applicable only to the selected source/station. Once you change the

 

 

 

source/station, you need to make the settings again.

 

AUTO

YES: Automatically starts memorizing 6 stations with good reception. ; NO: Cancels.

 

MEMORY

Selectable only if [NORMAL] is selected for [PRESET TYPE]. ( 5)

 

 

 

 

MONO SET

ON: Improves the FM reception, but the stereo effect may be lost. ; OFF: Cancels.

 

 

 

 

NEWS SET

ON: The unit will temporarily switch to News Programme if available. ; OFF: Cancels.

 

 

 

 

REGIONAL

ON: Switches to another station only in the specific region using the “AF” control. ;

 

 

OFF: Cancels.

 

AF SET

ON: Automatically searches for another station broadcasting the same program in the same

 

 

Radio Data System network with better reception when the current reception is poor. ;

 

 

OFF: Cancels.

 

 

 

 

TI

ON: Allows the unit to temporarily switch to Traffic Information if available (“TI” lights up). ;

 

 

OFF: Cancels.

 

PTY SEARCH

1

Press the volume knob to enter PTY language selection.

 

 

2

Turn the volume knob to select the PTY language (ENGLISH/ FRENCH/ GERMAN), then

 

 

3

press the knob.

 

 

Turn the volume knob to select the available Program Type (see the following).

 

 

4

Press S / T to start searching.

CLOCK

TIME SYNC

ON: Synchronizes the unit’s time to the Radio Data

 

System station time. ; OFF: Cancels.

Available Program Type

SPEECH : NEWS, AFFAIRS, INFO (information), SPORT, EDUCATE,

DRAMA, CULTURE, SCIENCE, VARIED, WEATHER, FINANCE, CHILDREN, SOCIAL, RELIGION, PHONE IN, TRAVEL, LEISURE, DOCUMENT

MUSIC : POP M (music), ROCK M (music), EASY M (music),

LIGHT M (music), CLASSICS, OTHER M (music), JAZZ, COUNTRY, NATION M (music), OLDIES, FOLK M (music)

The unit will search for the Program Type categorized under [SPEECH] or [MUSIC] if selected.

[MONO SET]/ [NEWS SET]/ [REGIONAL]/ [AF SET]/ [TI]/

[PTY SEARCH] is selectable only when the band is FM1/ FM2/ FM3.

If the volume is adjusted during reception of traffic information, alarm or news bulletin, the adjusted volume is memorized automatically. It will be applied the next time traffic information, alarm or news bulletin is turned on.

6

USB / iPod / ANDROID

Start playback

The source changes automatically and playback starts.

USB input terminal

USB

CA-U1EX (max.: 500 mA) (optional accessory)

iPod/iPhone (for )

KCA-iP102 / KCA-iP103 (optional accessory)*1 or accessory cable of the iPod/iPhone*2

ANDROID*3

Micro USB 2.0 cable*2 (commercially available)

*1

 

 

 

 

 

 

 

 

KCA-iP102 : 30-pin type, KCA-iP103 : Lightning type

*2

Do not leave the cable inside the car when not using.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

To

 

 

 

On the faceplate

 

 

 

 

 

 

 

On the remote control

 

 

 

 

 

 

 

 

 

 

 

 

Playback / pause

Press

.

 

 

 

 

 

 

 

 

 

Press

.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Reverse / Fast-forward*4

Press and hold S / T.

 

 

 

 

 

Press and hold S /

.

Select a track/file

Press S / T.

 

 

 

 

 

 

 

Press S /

.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Select a folder*5

Press J / K.

 

 

 

 

 

 

 

Press

/

 

 

.

Repeat play*6

Press

repeatedly.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

FILE REPEAT/ FOLDER REPEAT/ ALL REPEAT : MP3/WMA/WAV/FLAC file

 

 

 

 

FILE REPEAT/ FOLDER REPEAT/ REPEAT OFF : iPod or ANDROID

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Random play*6

Press

repeatedly.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

FOLDER RANDOM/ RANDOM OFF : MP3/WMA/WAV/FLAC file, iPod or

 

 

 

 

 

 

 

 

 

 

 

 

 

ANDROID

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Press and hold

to select ALL RANDOM.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

*3

When connecting an Android device, “Press [VIEW] to install KENWOOD MUSIC PLAY APP” is shown. Follow the instructions

 

to install the application. You can also install the latest version of KENWOOD MUSIC PLAY application on your Android device

*4

before connecting. ( 14)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

For ANDROID: Applicable only when [BROWSE MODE] is selected. (

8)

 

 

 

 

 

 

 

 

 

 

*5

Only for MP3/WMA/WAV/FLAC files. This does not work for iPod/ ANDROID.

 

 

 

 

*6

For iPod/ ANDROID: Applicable only when [MODE OFF]/ [BROWSE MODE] is selected. ( 8)

 

 

 

 

ENGLISH 7

USB / iPod / ANDROID

Select control mode

While in iPod source, press 5 repeatedly.

MODE ON : Control iPod using the iPod itself. However, you can still play/pause, file skip, fast-forward or reverse from this unit.

MODE OFF : Control iPod from this unit.

While in ANDROID source, press 5 repeatedly.

BROWSE MODE : Control Android device from this unit via KENWOOD MUSIC PLAY application installed in the Android device.

HAND MODE : Control Android device using the Android device itself via other media player applications installed in the Android device. However, you can still play/ pause and file skip from this unit.

Select music drive

Press 5 repeatedly.

Stored songs in the following drive will be played back.

Selected internal or external memory of a smartphone (Mass Storage Class).

Selected drive of a multiple drives device.

Select a file from a folder/list

1

Press

.

2

Turn the volume knob to select a folder/list, then press the knob.

3

Turn the volume knob to select a file, then press the knob.

 

 

 

 

 

Quick Search

 

 

If you have many files, you can search through them quickly.

 

 

Turn the volume knob quickly to browse through the list quickly.

Not applicable for iPod.

(or)

Press S / T to search at a preset skip search ratio. (9, [SKIP SEARCH])

• Pressing and holding S / T searches at a 10% ratio.

– Not applicable for MP3/WMA/WAV/FLAC files.

Alphabet Search (applicable only for iPod)

You can search for a file according to the first character.

Turn the volume knob quickly to enter character search.

Turn the volume knob to select the character.

To search for a character other than A to Z and 0 to 9, enter only “*”. Press S / T to move to the entry position.

• You can enter up to 3 characters.

Press the volume knob to start searching.

To return to the root folder/ first file/ top menu, press 5.

To return to the previous setting item, press .

To cancel, press and hold .

For iPod, applicable only when [MODE OFF] is selected.

For ANDROID, applicable only when [BROWSE MODE] is selected.

8

USB / iPod / ANDROID

Direct Music Search (using RC-406)

1 Press DIRECT.

2 Press the number buttons to enter a file number. 3 Press to search for music.

To cancel, press or DIRECT.

Not available if Random Play is selected.

Not applicable for iPod and ANDROID.

Listen to TuneIn Radio/ TuneIn Radio Pro/ Aupeo

(for )

Pandora® (for )

Preparation:

Install the latest version of the Pandora application on your device (iPhone/ iPod touch), then create an account and log in to Pandora.

• Select [ON] for [PANDORA SRC]. ( 5)

Start listening

1 Open the Pandora application on your device.

2Connect your device to the USB input terminal.

USB input terminal

While listening to TuneIn Radio, TuneIn Radio Pro or Aupeo, connect the iPod/iPhone to the USB input terminal of the unit.

• The unit will output the sound from these applications.

 

 

 

KCA-iP102 / KCA-iP103 (optional accessory)*1 or

 

 

 

 

 

accessory cable of the iPod/iPhone*2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Other settings

 

 

 

 

 

The source changes to PANDORA and broadcast starts.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1 Press the volume knob to enter [FUNCTION].

 

 

To

 

 

 

On the faceplate

 

On the remote control

 

 

 

 

 

 

 

 

2 Turn the volume knob to select an item (see the following

Playback / pause

Press

.

 

Press

.

 

 

table), then press the knob.

 

 

 

 

3 Repeat step 2 until the desired item is selected or activated.

Skip a track

Press T.

 

 

Press

.

 

4 Press and hold

to exit.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Thumbs up or thumbs

Press J / K.

 

Press

/

.

To return to the previous setting item, press

.

 

 

 

down*3

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Default: XX

*1

KCA-iP102 : 30-pin type, KCA-iP103 : Lightning type

 

 

 

 

USB

 

 

 

 

*2

Do not leave the cable inside the car when not using.

 

 

 

 

 

 

 

 

*3

If thumbs down is selected, the current track is skipped.

 

 

 

 

 

MUSIC DRIVE

DRIVE CHANGE: The next drive ([DRIVE 1] to [DRIVE 5]) is

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

selected automatically and playback starts.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Repeat steps 1 to 3 to select the following drives.

 

 

 

 

 

 

 

 

 

 

 

 

SKIP SEARCH

0.5%/ 1%/ 5%/ 10%: While listening to iPod or ANDROID,

 

 

 

 

 

 

 

 

 

 

 

 

selects the skip search ratio over the total files.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ENGLISH 9

Pandora® (for

 

 

 

)

 

AUX

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Preparation:

 

 

 

 

 

 

 

 

Create and save a new station

 

 

 

 

 

 

 

 

Select [ON] for [BUILT-IN AUX]. ( 5)

1

Press

.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Start listening

2

Turn the volume knob to select [NEW STATION], then press the knob.

 

3

Turn the volume knob to select [FROM TRACK] or [FROM ARTIST], then press the knob.

 

1 Connect a portable audio player (commercially

 

A new station is created based on the current song or artist.

 

4

 

 

available).

 

 

 

 

 

 

 

 

Press and hold one of the number buttons (1 to 5) to store.

 

 

 

 

 

 

 

 

 

 

 

 

Auxiliary input jack

To select a stored station, press one of the number buttons (1 to 5).

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Portable audio

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Search for a registered station

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

player

1

Press

.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2

Turn the volume knob to select an item, then press the knob.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

[BY DATE]: According to the registered date

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3

[A-Z]: Alphabetical order

 

 

 

 

3.5 mm stereo mini plug with “L” shaped

Turn the volume knob to select the desired station, then press the knob.

 

 

connector (commercially available)

To cancel, press and hold

.

 

2 Press

repeatedly to select AUX.

 

 

(or using RC-406)

 

 

 

3 Turn on the portable audio player and start playback.

 

 

 

 

 

Press J/ K to search for a station, then press .

Set the AUX name

Bookmark current song information

Press and hold the volume knob.

“BOOKMARKED” appears and the information is stored to your device. The bookmark is available on your Pandora account but not on this unit.

Delete a station

While listening to PANDORA...

1 Press the volume knob to enter [FUNCTION].

2 Turn the volume knob to select [SYSTEM], then press the knob.

3 Turn the volume knob to select [STATION DEL], then press the knob.

4 Turn the volume knob to select [A-Z] or [BY DATE], then press the knob.

5 Turn the volume knob to select the desired station to delete, then press the knob. 6 Turn the volume knob to select [YES], then press the knob.

7 Press and hold to exit.

To return to the previous setting item, press .

While listening to a portable audio player connected to the unit...

1 Press the volume knob to enter [FUNCTION].

2Turn the volume knob to select [SYSTEM], then press the knob.

3Turn the volume knob to select [AUX NAME SET], then press the knob.

4Turn the volume knob to select an item, then press the knob.

AUX (default)/ DVD/ PORTABLE/ GAME/ VIDEO/ TV

5 Press and hold to exit.

To return to the previous setting item, press .

10

AUDIO SETTINGS

While listening to any source...

1 Press AUD to enter [AUDIO CONTROL] directly.

2Turn the volume knob to select an item (see the following table), then press the knob.

3 Repeat step 2 until the desired item is selected or activated. 4 Press and hold to exit.

(or using RC-406)

1 Press AUD to enter [AUDIO CONTROL].

2 Press J/ K to select an item, then press .

To return to the previous setting item, press .

 

 

Default: XX

SUB-W LEVEL

–15 to +15 (0)

Adjusts the subwoofer output level.

 

 

 

BASS LEVEL

–8 to +8 (+2)

Adjusts the level to memorize for each source. (Before

 

 

 

 

MID LEVEL

–8 to +8 (+1)

making an adjustment, select the source you want to

 

 

adjust.)

TRE LEVEL

–8 to +8 (+1)

 

EQ PRO (This setting is stored to [USER].)

 

BASS ADJUST

BASS CTR FRQ

60/ 80/ 100/ 200: Selects the center frequency.

 

 

 

 

 

 

BASS LEVEL

–8 to +8 (+2): Adjusts the level.

 

 

 

 

 

 

BASS Q FACTOR

1.00/ 1.25/ 1.50/ 2.00: Adjusts the quality factor.

 

 

 

 

 

 

BASS EXTEND

ON: Turns on the extended bass. ; OFF: Cancels.

 

 

 

 

 

MID ADJUST

MID CTR FRQ

0.5K/ 1.0K/ 1.5K/ 2.5K: Selects the center frequency.

 

 

 

 

 

 

MID LEVEL

–8 to +8 (+1): Adjusts the level.

 

 

 

 

 

 

MID Q FACTOR

0.75/ 1.00/ 1.25: Adjusts the quality factor.

 

 

 

 

 

TRE ADJUST

TRE CTR FRQ

10.0K/ 12.5K/ 15.0K/ 17.5K: Selects the center frequency.

 

 

 

 

 

 

TRE LEVEL

–8 to +8 (+1): Adjusts the level.

 

 

 

 

PRESET EQ

DRIVE EQ/ TOP40/ POWERFUL/ ROCK/ POPS/ EASY/ JAZZ/

 

NATURAL/ USER: Selects a preset equalizer suitable to the music

 

genre. (Select [USER] to use the settings made in [EQ PRO].)

 

[DRIVE EQ] is a preset equalizer that reduces noise outside the car or

 

running noise of the tyres.

 

 

BASS BOOST

LV1/ LV2/ LV3: Selects your preferred bass boost level. ;

 

OFF: Cancels.

 

 

LOUDNESS

LV1/ LV2: Selects your preferred low and high frequencies boost to

 

produce a well-balanced sound at a low volume level. ; OFF: Cancels.

SUBWOOFER SET

ON: Turns on the subwoofer output. ; OFF: Cancels.

 

 

LPF SUBWOOFER

THROUGH: All signals are sent to the subwoofer. ; 85HZ/ 120HZ/

 

160HZ: Audio signals with frequencies lower than 85 Hz/ 120 Hz/

 

160 Hz are sent to the subwoofer.

SUB-W PHASE

REVERSE (180°)/ NORMAL (0°): Selects the phase of the subwoofer

 

output to be in line with the speaker output for optimum

 

performance. (Selectable only if a setting other than [THROUGH] is

 

selected for [LPF SUBWOOFER].)

 

 

FADER

R15 to F15 (0): Adjusts the rear and front speaker output balance.

BALANCE

L15 to R15 (0): Adjusts the left and right speaker output balance.

 

 

VOLUME OFFSET

For AUX: –8 to +8 (0) ; For other sources: –8 to 0: Preset the initial

 

volume level of each source. (Before adjustment, select the source

 

you want to adjust.)

 

 

SOUND RECNSTR

ON: Creates realistic sound by compensating the high-frequency

(Sound

components and restoring the rise-time of the waveform that are

reconstruction)

lost in audio data compression. ; OFF: Cancels.

[SUB-W LEVEL]/ [SUBWOOFER SET]/ [LPF SUBWOOFER]/ [SUB-W PHASE] is selectable only if [SWITCH PREOUT] is set to [SUB-W]. ( 4)

[SUB-W LEVEL]/ [LPF SUBWOOFER]/ [SUB-W PHASE] is selectable only if [SUBWOOFER SET] is set to [ON].

ENGLISH 11

Loading...
+ 25 hidden pages