Kenwood KDC-118, KDC-MP168U, KDC-168U, KDC-268U Instruction Manual [es]

KDC-268U KDC-118 KDC-168U KDC-MP168U KDC-138U

CD-RECEIVER

INSTRUCTION MANUAL

AMPLI-TUNER LECTEUR DE CD

MODE D’EMPLOI

REPRODUCTOR DE DISCOS COMPACTOS RECEPTOR DE FM/AM

MANUAL DE INSTRUCCIONES

For your records

Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you

call upon your Kenwood dealer for information or service on the product.

Model KDC-268U/ KDC-168U/ KDC-138U/ KDC-118/ KDC-MP168U Serial number

US Residents Only

Register Online

Register your Kenwood product at http://www.kenwood.com/usa/

© 2016 JVC KENWOOD Corporation

B5A-1329-00 (KN)

CONTENTS

BEFORE USE	2
BASICS	3
GETTING STARTED	4

1Select the display language and cancel the demonstration

2 Set the clock and date

3 Set the initial settings

RADIO					5
CD/USB/iPod/ANDROID					7
Pandora®					10
(for		/		)
iHeartRadio®					11
(for		/		)
AUX					12
AUDIO SETTINGS					13
DISPLAY SETTINGS					14
TROUBLESHOOTING					15
REFERENCES					17
Maintenance
More information
INSTALLATION/
CONNECTION					20
SPECIFICATIONS					22

BEFORE USE

IMPORTANT

•To ensure proper use, please read through this manual before using this product. It is especially important that you read and observe Warning and Caution in this manual.

•Please keep the manual in a safe and accessible place for future reference.

WARNING

•Do not operate any function that takes your attention away from safe driving.

•Do not ingest the battery, Chemical Burn Hazard

The remote control supplied with this product contains a coin/button cell battery.

If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries away from children.

If the battery compartment does not close securely, stop using the product and keep it away from children.

If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.

Caution

Volume setting:

•Adjust the volume so that you can hear sounds outside the car to prevent accidents.

•Lower the volume before playing digital sources to avoid damaging the speakers by the sudden increase of the output level.

General:

•Avoid using the external device if it might hinder safe driving.

•Make sure all important data has been backed up. We shall bear no responsibility for any loss of recorded data.

•Never put or leave any metallic objects (such as coins or metal tools) inside the unit, to prevent a short circuit.

•If a disc error occurs due to condensation on the laser lens, eject the disc and wait for the moisture to evaporate.

•Depending on the types of cars, the antenna will automatically extend when you turn on the unit with the antenna control wire connected ( 21). Turn off the unit or change the source to STANDBY when parking at a low ceiling area.

Remote control (RC-406):

•Do not leave the remote control in hot places such as on the dashboard.

•The Lithium battery is in danger of explosion if replaced incorrectly. Replace it only with the same or equivalent type.

•The battery pack or batteries shall not be exposed to excessive heat such as sunshine, fire or the like.

How to read this manual

•Operations are explained mainly using buttons on the faceplate of .

•English indications are used for the purpose of explanation. You can select the display language from the [FUNCTION] menu. ( 5)

•[XX] indicates the selected items.

•( XX) indicates references are available on the stated page.

2ENGLISH

BASICS

Faceplate		Remote control (RC-406)
	Loading slot	Display window
		Remote sensor (Do not
	Volume knob	expose to bright sunlight.)
		Pull out the
		insulation sheet
		when using for
		the first time.

	Detach button		: Flashes when the unit enters searching status.	* Not used
Attach	Detach	How to reset		How to replace the battery
			Your preset adjustments will be
			erased except stored radio stations.
To		On the faceplate		On the remote control
Turn on the power		Press	.	Press and hold SRC to turn off the power.
		• Press and hold to turn off the power.		( Pressing SRC does not turn on the power. )

Adjust the volume	Turn the volume knob.		Press	or	.
			• Press and hold		to continuously increase
			the volume to 15.
			Press ATT during playback to attenuate the sound.
			• Press again to cancel.
Select a source	Press	repeatedly.	Press SRC repeatedly.
Change the display information*	Press DISP repeatedly. ( 19)		( Not available )

* : You can also turn off the display information by pressing DISP repeatedly.

ENGLISH 3

GETTING STARTED

1Select the display language and cancel the demonstration

When you turn on the power (or after you reset the unit), the display shows: “SEL LANGUAGE” “PRESS” “VOLUME KNOB”

1Turn the volume knob to select [ENG] (English) or [SPA] (Spanish), then press the knob.

[ENG] is selected for the initial setup.

Then, the display shows: “CANCEL DEMO” “PRESS” “VOLUME KNOB”.

2Press the volume knob.

[YES] is selected for the initial setup.

3Press the volume knob again.

“DEMO OFF” appears.

2Set the clock and date

1 Press the volume knob to enter [FUNCTION].

2 Turn the volume knob to select [CLOCK], then press the knob.

To adjust the clock

3Turn the volume knob to select [CLOCK ADJUST], then press the knob.

4Turn the volume knob to make the settings, then press the knob.

Hour Minute

5Turn the volume knob to select [CLOCK FORMAT], then press the knob.

6Turn the volume knob to select [12H] or [24H], then press the knob.

To set the date

7 Turn the volume knob to select [DATE FORMAT], then press the knob.

8 Turn the volume knob to select [DD/MM/YY] or [MM/DD/YY], then press the knob. 9 Turn the volume knob to select [DATE SET], then press the knob.

10Turn the volume knob to make the settings, then press the knob.

Day Month Year or Month Day Year

11Press and hold to exit.

To return to the previous setting item, press .

3Set the initial settings

1 Press repeatedly to enter STANDBY.

2 Press the volume knob to enter [FUNCTION].

3Turn the volume knob to select an item (see the following table), then press the knob.

4 Repeat step 3 until the desired item is selected or activated. 5 Press and hold to exit.

To return to the previous setting item, press .

			Default: XX
AUDIO CONTROL
SWITCH PREOUT	REAR/SUBWOOFER or REAR/SUB-W: Selects whether rear speakers or a subwoofer are
	connected to the line out terminals on the rear (through an external amplifier). ( 21)
SP SELECT	OFF/ 5/4/ 6 × 9/6/ OEM: Selects according to the speaker size (5 inches or 4 inches,
	6×9 inches or 6 inches) or OEM speakers for optimum performance.
DISPLAY
EASY MENU	(For		)
	When entering [FUNCTION]...
	ON: ZONE 1 illumination changes to white color. ;
	OFF: ZONE 1 illumination remains as [COLOR SELECT] color. ( 15)

•ZONE 2 illumination changes to white color when you enter [FUNCTION], irregardless of the [EASY MENU] setting.

•Refer to the illustration on page 14 for ZONE identification.

4ENGLISH

GETTING STARTED

RADIO

TUNER SETTING

PRESET TYPE		NORMAL: Memorizes one station for each preset button in each band
		(FM1/FM2/FM3/AM). ; MIX: Memorizes one station for each preset
		button, regardless of the selected band.
SYSTEM
KEY BEEP		ON: Activates the keypress tone. ; OFF: Deactivates.
SOURCE SELECT
	PANDORA SRC	(For		/		)
		ON: Enables PANDORA in source selection. ; OFF: Disables. ( 10)
	IHEART SRC	(For		/		)
		ON: Enables IHEARTRADIO in source selection. ; OFF: Disables. ( 11)
	BUILT-IN AUX	ON: Enables AUX in source selection. ; OFF: Disables. ( 12)
CD READ		1: Automatically distinguishes between audio file disc and music CD. ;
		2: Forces to play as a music CD. No sound can be heard if an audio file disc
		is played.

F/W UPDATE (except for )

UPDATE SYSTEM

		F/W UP xxxx	YES: Starts upgrading the firmware. ; NO: Cancels (upgrading is not
			activated).
			For details on how to update the firmware, visit
			<www.kenwood.com/cs/ce/>.
	CLOCK
	CLOCK DISPLAY		ON: The clock time is shown on the display even when the unit is turned
			off. ; OFF: Cancels.
	ENGLISH		Select the display language for [FUNCTION] menu and music information
			if applicable.
	ESPANOL
			By default, [ENGLISH] is selected.

Search for a station

1 Press repeatedly to select TUNER.

2Press repeatedly (or press / on the remote control) to select FM1/FM2/FM3/AM.

3Press S/ T(or press S/ on the remote control) to search for a station.

•To change the searching method for S/ T: Press repeatedly.

AUTO1 : Automatically search for a station. AUTO2 : Search for a preset station. MANUAL : Manually search for a station.

•To store a station: Press and hold one of the number buttons (1 to 6).

•To select a stored station: Press one of the number buttons (1 to 6) (or press one of the number buttons (1 to 6) on the remote control).

Direct Access Tuning (using the remote control)

1 Press DIRECT to enter Direct Access Tuning.

2 Press the number buttons to enter a frequency.

3Press to search for a station.

•To cancel, press or DIRECT.

•If no operation is done for 10 seconds after step 2, Direct Access Tuning is automatically canceled.

ENGLISH 5

RADIO

Other settings

1 Press the volume knob to enter [FUNCTION].

2Turn the volume knob to select an item (see the following table), then press the knob.

3 Repeat step 2 until the desired item is selected or activated. 4 Press and hold to exit.

To return to the previous setting item, press .

							Default: XX
TUNER SETTING
AUTO	YES: Automatically starts memorizing 6 stations with good reception. ; NO: Cancels.
MEMORY	• Selectable only if [NORMAL] is selected for [PRESET TYPE]. ( 5)
MONO SET	ON: Improves the FM reception, but the stereo effect may be lost. ; OFF: Cancels.
NEWS SET	(For					)
	ON: The unit will temporarily switch to News Programme if available. ; OFF: Cancels.
REGIONAL	(For					)
	ON: Switches to another station only in the specific region using the “AF” control. ;
	OFF: Cancels.
AF SET	(For					)
	ON: Automatically searches for another station broadcasting the same program in the
	same Radio Data System network with better reception when the current reception is
	poor. ; OFF: Cancels.
TI	(For			/			)
	ON: Allows the unit to temporarily switch to Traffic Information if available (“TI” lights
	up). ; OFF: Cancels.

PTY SEARCH (For / )

Select the available Program Type (see the following), then, press S / T to start.

CLOCK

TIME SYNC (For / )

ON: Synchronizes the unit’s time to the Radio Broadcast Data System/Radio Data System station time. ; OFF: Cancels.

Available Program Type for [PTY SEARCH]

(For			)
SPEECH :		NEWS, INFORM (information), SPORTS, TALK, LANGUAGE,

REL TALK (religious talk), PERSNLTY (personality), PUBLIC,

COLLEGE, HABL ESP (spanish talk), WEATHER

MUSIC : ROCK, CLS ROCK (classic rock), ADLT HIT (adult hits),

SOFT RCK (softrock), TOP 40, COUNTRY, OLDIES, SOFT,

NOSTALGA (nostalgia), JAZZ, CLASSICL (classical), R & B (rhythm and blues), SOFT R&B (soft rhythm and blues), REL MUSC (religious music), MUSC ESP (spanish music),

HIP HOP

(For )

SPEECH : NEWS, AFFAIRS, INFO (information), SPORT, EDUCATE, DRAMA, CULTURE, SCIENCE, VARIED, WEATHER, FINANCE, CHILDREN, SOCIAL, RELIGION, PHONE IN, TRAVEL, LEISURE,

DOCUMENT

MUSIC : POP M (music), ROCK M (music), EASY M (music), LIGHT M (music), CLASSICS, OTHER M (music), JAZZ, COUNTRY, NATION M (music), OLDIES, FOLK M (music)

The unit will search for the Program Type categorized under

[SPEECH] or [MUSIC] if selected.

•[MONO SET]/[NEWS SET]/[REGIONAL]/[AF SET]/[TI]/[PTY SEARCH] is selectable only when the band is FM1/FM2/FM3.

•If the volume is adjusted during reception of traffic information or news bulletin, the adjusted volume is memorized automatically. It will be applied the next time traffic information or news bulletin is turned on.

6ENGLISH

CD/USB/iPod/ANDROID

Start playback

The source changes automatically and playback starts.

CD

MEject disc

Label side

USB input terminal

USB

CA-U1EX (max.: 500 mA) (optional accessory)

iPod/iPhone

KCA-iP102/KCA-iP103 (optional accessory)*1 or accessory of the iPod/ iPhone*2

ANDROID*3

Micro USB 2.0 cable*2 (commercially available)

Selectable sources:

CD/USB/iPod/ANDROID

/

:

/

: CD/USB/ANDROID

:

CD

• To directly select USB/iPod/ANDROID source, press iPod USB or APP USB.

To

On the faceplate

On the remote control

Playback/pause

Press

.

Press

.

Reverse/Fast-forward*4

Press and hold S / T.

Press and hold S /

.

Select a track/file

Press S / T.

Press S /

.

Select a folder*5

Press J / K.

Press

/

.

*1

KCA-iP102 : 30-pin type, KCA-iP103 : Lightning type

*2

Do not leave the cable inside the car when not using.

*3

When connecting an Android device, “Press [VIEW] to install KENWOOD MUSIC PLAY APP” is shown. Follow the instructions

to install the application. You can also install the latest version of KENWOOD MUSIC PLAY application on your Android device

*4

before connecting. For more information, visit <www.kenwood.com/cs/ce/>.

For ANDROID: Applicable only when [BROWSE MODE] is selected. (

8)

*5

For CD: Only for MP3/WMA files. This does not work for iPod/ANDROID.

ENGLISH 7

CD/USB/iPod/ANDROID

To		On the faceplate
Repeat play*6		Press	repeatedly.
		TRACK REPEAT/ALL REPEAT: Audio CD
		FILE REPEAT/FOLDER REPEAT/ALL REPEAT: MP3/WMA/
		WAV/FLAC file
		FILE REPEAT/FOLDER REPEAT/REPEAT OFF: iPod or
		ANDROID
Random play*6		Press	repeatedly.
		DISC RANDOM/RANDOM OFF: Audio CD
		FOLDER RANDOM/RANDOM OFF: MP3/WMA/WAV/FLAC
		file, iPod or ANDROID
		Press and hold		to select ALL RANDOM.*7
*6	For iPod/ANDROID: Applicable only when [MODE OFF]/[BROWSE MODE] is selected.
*7	For CD: Only for MP3/WMA files.

Select control mode

While in iPod source, press iPod USB repeatedly.

MODE ON : Control iPod using the iPod itself. However, you can still play/ pause, file skip, fast-forward or reverse from this unit.

MODE OFF : Control iPod from this unit.

While in ANDROID source, press iPod USB or APP USB repeatedly.

BROWSE MODE : Control Android device from this unit via KENWOOD MUSIC PLAY application installed in the Android device.

HAND MODE : Control Android device using the Android device itself via other media player applications installed in the Android device. However, you can still play/pause and file skip from this unit.

Select a file from a folder/list

For iPod/ANDROID, applicable only when [MODE OFF]/[BROWSE MODE] is selected.

1	Press	.
2	Turn the volume knob to select a folder/list, then press the knob.
3	Turn the volume knob to select a file, then press the knob.
	Quick Search (applicable only for CD, USB and ANDROID source)
	If you have many files, you can search through them quickly.
	Turn the volume knob quickly to browse through the list quickly.
	Skip Search (applicable only for iPod and ANDROID source)
	Press S / T to search at a preset skip search ratio. ( 9, [SKIP
	SEARCH])
	• Pressing and holding S / T searches at a 10% ratio.
	Alphabet search (applicable only for iPod and ANDROID source)
	You can search for a file according to the first character.

For iPod source

1 Turn the volume knob quickly to enter character search.

2Turn the volume knob to select the character.

•Select “*” to search for a character other than A to Z, 0 to 9.

3 Press S / T to move to the entry position.

•You can enter up to 3 characters.

4 Press the volume knob to start searching.

For ANDROID source

1 Press J / K to enter character search.

2Turn the volume knob to select the character. ^A^: Upper case letters (A to Z)

_A_: Lower case letters (a to z) -0-: Numbers (0 to 9)

***: Character other than A to Z, 0 to 9

3 Press the volume knob to start searching.

8ENGLISH

CD/USB/iPod/ANDROID

•To return to the root folder/first file/top menu, press 5.

•To return to the previous setting item, press .

•To cancel, press and hold .

Direct Music Search (using the remote control)

1 Press DIRECT.

2 Press the number buttons to enter a track/file number. 3 Press to search for music.

•To cancel, press or DIRECT.

•Not available if Random Play is selected.

•Not applicable for iPod and ANDROID source.

Select music drive (except for )

While in USB source, press iPod USB or APP USB repeatedly.

Stored songs in the following drive will be played back.

•Selected internal or external memory of a smartphone (Mass Storage Class).

•Selected drive of a multiple drives device.

Listen to TuneIn Radio/TuneIn Radio Pro/Aupeo

(for / )

While listening to TuneIn Radio, TuneIn Radio Pro or Aupeo, connect the iPod/iPhone to the USB input terminal of the unit.

• The unit will output the sound from these applications.

Other settings

1 Press the volume knob to enter [FUNCTION].

2Turn the volume knob to select an item (see the following table), then press the knob.

3 Repeat step 2 until the desired item is selected or activated. 4 Press and hold to exit.

To return to the previous setting item, press .

	Default: XX
USB
MUSIC DRIVE	DRIVE CHANGE: The next drive ([DRIVE 1] to [DRIVE 5]) is selected
	automatically and playback starts.
	Repeat steps 1 to 3 to select the following drives.
SKIP SEARCH	0.5%/1%/5%/10%: While listening to iPod or ANDROID source, selects
	the skip search ratio over the total files.

ENGLISH 9

Pandora® (for / )

Preparation:

Install the latest version of the Pandora application on your device (iPhone/iPod touch), then create an account and log in to Pandora.

• Select [ON] for [PANDORA SRC] in [SOURCE SELECT]. ( 5)

Start listening

1 Open the Pandora application on your device.

2Connect your device to the USB input terminal.

USB input terminal

KCA-iP102/KCA-iP103 (optional accessory)*1 or accessory of the iPod/iPhone*2

	The source changes to PANDORA and broadcast starts.
To		On the faceplate		On the remote control
Playback/pause		Press	.	Press		.
Skip a track		Press T.		Press		.
Thumbs up or thumbs		Press J / K.		Press	/	.
down*3
*1	KCA-iP102 : 30-pin type, KCA-iP103 : Lightning type
*2	Do not leave the cable inside the car when not using.
*3	If thumbs down is selected, the current track is skipped.

Create and save a new station

1	Press	.
2	Turn the volume knob to select [NEW STATION], then press the knob.

3Turn the volume knob to select [FROM ARTIST] or [FROM TRACK], then press the knob.

A new station is created based on the artist or current song.

4 Press and hold one of the number buttons (1 to 5) to store.

To select a stored station: Press one of the number buttons (1 to 5).

Search for a registered station

1 Press .

2Turn the volume knob to select an item, then press the knob.

[BY DATE]: According to the registered date [A-Z]: By alphabetical order

3Turn the volume knob (or press J/ K on the remote control) to select the desired station.

4Press the volume knob (press on the remote control) to confirm.

To cancel, press and hold .

Bookmark current song information

Press and hold the volume knob.

“BOOKMARKED” appears and the information is stored to your device.

•The bookmark is available on your Pandora account but not on this unit.

10 ENGLISH

Pandora® (for / )

Delete a station

While listening to PANDORA...

1 Press

.

2Turn the volume knob to select [STATION DEL], then press the knob.

3Turn the volume knob to select [BY DATE] or [A-Z], then press the knob.

4Turn the volume knob to select the desired station to delete, then press the knob.

5Turn the volume knob to select [YES], then press the knob.

6 Press and hold to exit.

iHeartRadio® (for / )

Preparation:

Install the latest version of iHeart Link for KENWOOD application on your device (iPhone/ iPod touch), then create an account and log in to iHeartRadio.

• Select [ON] for [IHEART SRC] in [SOURCE SELECT]. ( 5)

Start listening

1 Open the iHeart Link application on your device.

2Connect your device to the USB input terminal.

USB input terminal

To return to the previous setting item, press	.	KCA-iP102/KCA-iP103 (optional accessory)*1
		or accessory of the iPod/iPhone*2

3Press repeatedly to select IHEARTRADIO.

Broadcast starts automatically.

To	On the faceplate		On the remote control
Playback/pause	Press	.	Press	.
Skip a track for custom station	Press T.		Press	.
Thumbs up or thumbs down*3 for	Press J / K.		( Not available )
custom station
Create a new/custom station	Press 1.		( Not available )
Add to favorite stations for live	Press 2.		( Not available )
station
Scan for live station	Press 3.		( Not available )

*1 *2 *3

KCA-iP102 : 30-pin type, KCA-iP103 : Lightning type Do not leave the cable inside the car when not using. If thumbs down is selected, the current track is skipped.

ENGLISH 11

iHeartRadio® (for / )

Search for a station

1	Press	.
2	Turn the volume knob to select a category, then press the knob.

3Turn the volume knob (or press J/ K on the remote control) to select the desired station.

4Press the volume knob (or press on the remote control) to confirm.

When a city list appears, you can skip cities in alphabetical order.

To cancel, press and hold

.

AUX

Preparation:

Select [ON] for [BUILT-IN AUX] in [SOURCE SELECT]. ( 5)

Start listening

1 Connect a portable audio player (commercially available).

Auxiliary input jack

Portable audio player

Skip cities by alphabetical order

While a city list appears during search...

1 Turn the volume knob quickly to enter character search.

2Turn the volume knob or press S / T to select the character to be searched for.

3 Press J/ K to move to the previous/next page.

4 Press the volume knob to start searching.

To cancel, press and hold .

Delete a station

While listening to IHEARTRADIO...

1	Press the volume knob to enter [FUNCTION].
2	Turn the volume knob to select [SYSTEM], then press the knob.
3	Turn the volume knob to select [STATION DEL], then press the knob.
4	Turn the volume knob to select [LIVE] or [CUSTOM], then press the knob.
5	Turn the volume knob to select the desired station to delete, then press
6	the knob.
	Turn the volume knob to select [YES], then press the knob.
7	Press and hold	to exit.

To return to the previous setting item, press .

3.5 mm (1/8") stereo mini plug with “L” shaped connector (commercially available)

2 Press repeatedly to select AUX.

3 Turn on the portable audio player and start playback.

Set the AUX name

While listening to a portable audio player connected to the unit...

1 Press the volume knob to enter [FUNCTION].

2 Turn the volume knob to select [SYSTEM], then press the knob.

3Turn the volume knob to select [AUX NAME SET], then press the knob.

4Turn the volume knob to select an item, then press the knob.

AUX (default)/DVD/PORTABLE/GAME/VIDEO/TV

5 Press and hold

to exit.

To return to the previous setting item, press .

12 ENGLISH

AUDIO SETTINGS

While listening to any source...

1Press the volume knob to enter [FUNCTION].

For : Press AUD to enter [AUDIO CONTROL] directly.

2Turn the volume knob to select an item (see the following table), then press the knob.

3 Repeat step 2 until the desired item is selected or activated. 4 Press and hold to exit.

To return to the previous setting item, press .

(or using the remote control)

1 Press AUD to enter [AUDIO CONTROL].

2 Press J/ K to select an item, then press .

			Default: XX
	AUDIO CONTROL
	SUB-W LEVEL	–15 to +15 (0)	Adjusts the subwoofer output level.
	BASS LEVEL	–8 to +8 (+2)	Adjusts the level to memorize for each source. (Before
	MID LEVEL	–8 to +8 (+1)	making an adjustment, select the source you want
			to adjust.)
	TRE LEVEL	–8 to +8 (+1)

EQ PRO (This setting is stored to [USER].)

	BASS ADJUST	BASS CTR FRQ	60HZ/80HZ/100HZ/200HZ or 60/80/100/200:
			Selects the center frequency.
		BASS LEVEL	–8 to +8 (+2): Adjusts the level.
		BASS Q FACTOR	1.00/1.25/1.50/2.00: Adjusts the quality factor.
		BASS EXTEND	ON: Turns on the extended bass. ; OFF: Cancels.
	MID ADJUST	MID CTR FRQ	0.5KHZ/1.0KHZ/1.5KHZ/2.5KHZ: Selects the
			center frequency.
		MID LEVEL	–8 to +8 (+1): Adjusts the level.
		MID Q FACTOR	0.75/1.00/1.25: Adjusts the quality factor.
	TRE ADJUST	TRE CTR FRQ	10.0KHZ/12.5KHZ/15.0KHZ/17.5KHZ: Selects the
			center frequency.
		TRE LEVEL	–8 to +8 (+1): Adjusts the level.
PRESET EQ		DRIVE EQ/TOP40/POWERFUL/ROCK/POPS/EASY/JAZZ/NATURAL/
		USER: Selects a preset equalizer suitable to the music genre. (Select
		[USER] to use the settings made in [EQ PRO].)
		[DRIVE EQ] is a preset equalizer that reduces noise outside the car or
		running noise of the tyres.
BASS BOOST		LEVEL1/LEVEL2/LEVEL3 or LV1/LV2/LV3: Selects your preferred bass
		boost level. ; OFF: Cancels.
LOUDNESS		LEVEL1/LEVEL2 or LV1/LV2: Selects your preferred low and high
		frequencies boost to produce a well-balanced sound at a low volume
		level. ; OFF: Cancels.
SUBWOOFER SET		ON: Turns on the subwoofer output. ; OFF: Cancels.

ENGLISH 13

AUDIO SETTINGS

LPF SUBWOOFER	THROUGH: All signals are sent to the subwoofer. ;
	85HZ/120HZ/160HZ: Audio signals with frequencies lower than
	85 Hz/120 Hz/160 Hz are sent to the subwoofer.
SUB-W PHASE	REVERSE (180°)/NORMAL (0°): Selects the phase of the subwoofer
	output to be in line with the speaker output for optimum performance.
	(Selectable only if a setting other than [THROUGH] is selected for
	[LPF SUBWOOFER].)
FADER	R15 to F15 (0): Adjusts the rear and front speaker output balance.
BALANCE	L15 to R15 (0): Adjusts the left and right speaker output balance.
VOLUME OFFSET	For AUX: –8 to +8 (0) ; For other sources: –8 to 0: Preset the initial
	volume level of each source. (Before adjustment, select the source you
	want to adjust.)
SOUND RECNSTR	ON: Creates realistic sound by compensating the high-frequency
(Sound	components and restoring the rise-time of the waveform that are lost
reconstruction)	in audio data compression. ; OFF: Cancels.

•[SUB-W LEVEL]/[SUBWOOFER SET]/[LPF SUBWOOFER]/[SUB-W PHASE] is selectable only if [SWITCH PREOUT] is set to [SUBWOOFER] or [SUB-W]. ( 4)

•[SUB-W LEVEL]/[LPF SUBWOOFER]/[SUB-W PHASE] is selectable only if [SUBWOOFER SET] is set to [ON]. ( 13)

DISPLAY SETTINGS

(For )

(For / /

)

(For

)

Set the dimmer

Press and hold DISP (DIMMER) to turn on or off the dimmer.

•If you have set [DIMMER TIME] ( 15), it will be canceled once you press and hold this button.

Other settings

1 Press the volume knob to enter [FUNCTION].

2 Turn the volume knob to select an item ( 15), then press the knob.

3Repeat step 2 until the desired item is selected/activated or follow the instructions stated on the selected item.

4 Press and hold

to exit.

To return to the previous setting item, press .

14 ENGLISH

DISPLAY SETTINGS

Default: XX

DISPLAY

COLOR SELECT

(For

)

Select color for ALL ZONE, ZONE 1 and ZONE 2 separately.

	1	Select a zone. (See illustration on page 14.)
	2	Select a color for the selected zone.
		VARIABLE SCAN/CUSTOM R/G/B/preset colors*
	To make your own color, select [CUSTOM R/G/B]. The color you have
	made will be stored in [CUSTOM R/G/B].
	1	Press the volume knob to enter the detailed color adjustment.
	2	Press S/ Tto select the color (R/G/B) to adjust.
	3	Turn the volume knob to adjust the level (0 to 9), then press the
		knob.
DIMMER	Dim the illumination.
	ON: Dimmer is turned on. ; OFF: Cancels.
	DIMMER TIME: Set the dimmer on and off time.
	1	Turn the volume knob to adjust the [ON] time, then press the
	2	knob.
		Turn the volume knob to adjust the [OFF] time, then press the
		knob.
	(Default: [ON]: PM6:00 or 6:00PM; [OFF]: AM6:00 or 6:00AM)
BRIGHTNESS	1 Select a zone. (See illustration on page 14.)
	2	0 — 31: Select your preferred brightness level for the selected
		zone.
TEXT SCROLL	AUTO/ONCE: Select whether to scroll the display information
	automatically, or scroll only once. ; OFF: Cancels.

*Preset colors: RED1/RED2/RED3/PURPLE1/PURPLE2/PURPLE3/PURPLE4/BLUE1/ BLUE2/BLUE3/SKYBLUE1/SKYBLUE2/LIGHTBLUE/AQUA1/AQUA2/GREEN1/ GREEN2/GREEN3/YELLOWGREEN1/YELLOWGREEN2/YELLOW/ORANGE1/ ORANGE2/ORANGERED

TROUBLESHOOTING

Symptom		Remedy
	Sound cannot be heard.	• Adjust the volume to the optimum level.
		• Check the cords and connections.
	“MISWIRING CHECK WIRING	Turn the power off, then check to be sure the terminals of
	THEN PWR ON” appears.	the speaker wires are insulated properly. Turn the power
General		on again.
	appears.	Send the unit to the nearest service center.
	“PROTECTING SEND SERVICE”
	• Sound cannot be heard.	Clean the connectors. (	17)
	• The unit does not turn on.
	• Information shown on the
	display is incorrect.
	The unit does not work at all.	Reset the unit. ( 3)
Radio	• Radio reception is poor.	Connect the antenna firmly.
	• Static noise while listening
	to the radio.
	Disc cannot be ejected.	Press and hold Mto forcibly eject the disc. Be careful not
		to drop the disc when it is ejected. If this does not solve the
		problem, reset the unit. (	3)
	Noise is generated.	Skip to another track or change the disc.
	Tracks do not play back as	Playback order is determined when files are recorded.
CD/USB/iPod	you intended them to play.
	correct.	Do not use too many hierarchical levels or folders.
	“READING” keeps flashing.
	Elapsed playing time is not	This is caused by how the tracks are recorded.
	Correct characters are not	• This unit can only display uppercase letters, numbers,
	displayed (e.g. album name).	and a limited number of symbols.
		• Depending on the display language you have selected
		( 5), some characters may not be displayed correctly.
	“NA FILE”	Make sure the disc contains supported audio files. ( 18)
	“NO DISC”	Insert a playable disc into the loading slot.

ENGLISH 15

TROUBLESHOOTING

	Symptom			Remedy
		“TOC ERROR”		Make sure the disc is clean and inserted properly.
		“PLEASE EJECT”		Reset the unit. If this does not solve the problem, consult
				your nearest service center.
		“READ ERROR”		Copy the files and folders onto the USB device again. If this
	CD/USB/iPod			does not solve the problem, reset the USB device or use
				another USB device.
		“NO DEVICE”		Connect a USB device, and change the source to USB again.
		“COPY PRO”		A copy-protected file is played.
		“NA DEVICE”		Connect a supported USB device, and check the
				connections.
		“NO MUSIC”		Connect a USB device that contains playable audio files.
		“iPod ERROR”		•	Reconnect the iPod.
				•	Reset the iPod.
		•	Sound cannot	• Reconnect the Android device.
			be heard during	• If in [HAND MODE], launch any media player application
			playback.		on the Android device and start playback.
		•	Sound output only	• If in [HAND MODE], relaunch the current media player
			from the Android		application or use another media player application.
			device.	• Restart the Android device.
				• If this does not solve the problem, the connected Android
	ANDROID				device is unable to route the audio signal to unit. ( 18)
		Cannot playback at		• Make sure KENWOOD MUSIC PLAY APP is installed on the
		[BROWSE MODE].			Android device. ( 7)
				• Reconnect the Android device and select the appropriate
					control mode.
				• If this does not solve the problem, the connected Android
					device does not support [BROWSE MODE]. (	18)
		“NO DEVICE” or		• Switch off the developer options on the Android device.
		“READING” keeps		• Reconnect the Android device.
		flashing.		• If this does not solve the problem, the connected Android
					device does not support [BROWSE MODE]. (	18)

Symptom		Remedy
ANDROID	Playback is intermittent	Turn off the power saving mode on the Android device.
	or sound skips.
	“ANDROID ERROR”/	• Reconnect the Android device.
	“NA DEVICE”	• Restart the Android device.
	“ADD ERROR”	New station creation is unsuccessful.
	“CHECK DEVICE”	Check the Pandora application on your device.
	“NO SKIPS”	The skip limit has been reached.
	“NO STATIONS”	No stations are found.
Pandora	“STATION LIMIT”	The number of registered stations has reached its limit.
		Retry after deleting unnecessary stations from your device.
	“CONNECT ERROR”	Communication is unstable.
	“RATING ERROR”	Registration of thumbs up/thumbs down has failed due to
		insufficient network connectivity.
	“THUMBS N/A”	Registration of thumbs up/thumbs down is not allowed.
	“LICENSE ERROR”	You try to access from a country which Pandora is not
		deliverable.
	iHeartRadio station	If “Explicit Content” in [Account Settings] is checked in
	cannot be selected.	the web version of iHeartRADIO, custom stations become
		unavailable.
	“CANNOT CREATE”	Custom station name creation is unsuccessful.
iHeartRadio	“CANNOT SAVE”	Addition to the favorite category failed.
	“NO SKIPS”	The skip limit has been reached. Retry later.
	“DISCONNECTED”	Check the connection to the device.
	“NO STATIONS”	No stations are found.
	“NOT CONNECTED”	Link to the application is impossible.
	“IHEARTLINK UP”	Make sure you have installed the latest version of the iHeart
		Link for KENWOOD application on your device.

16 ENGLISH

Connector (on the reverse side of the faceplate)

TROUBLESHOOTING

	Symptom		Remedy
		“PLEASE LOGIN”	You haven’t log in. Log in again.
	iHeartRadio	“STATION NOT AVAILABLE”	Broadcast from the station is over.
		“STATION NOT SELECTED”	No station is selected.
		“STREAM ERROR”	Broadcast data is interrupted.
		“THUMB FAILED”	Registration of Thumbs Up/Down has failed.
		“TIMED OUT”	The request has resulted in time-out.

Muting upon the reception of a phone call

Connect the MUTE wire to your telephone using a commercial telephone accessory. ( 21)

When a call comes in, “CALL” appears. (The audio system pauses.)

• To continue listening to the audio system during a call, press . “CALL” disappears and the audio system resumes.

When the call ends, “CALL” disappears. (The audio system resumes.)

REFERENCES

Maintenance

Cleaning the unit

Wipe off dirt on the faceplate with a dry silicone or soft cloth.

Cleaning the connector

Detach the faceplate and clean the connector gently with a cotton swab, being careful not to damage the connector.

Handling discs

•Do not touch the recording surface of the disc.

•Do not stick tape etc. on the disc, or use a disc with tape stuck on it.

•Do not use any accessories for the disc.

•Clean from the center of the disc and move outward.

•Clean the disc with a dry silicone or soft cloth. Do not use any solvents.

•When removing discs from this unit, pull them out horizontally.

•Remove burrs from the center hole and disc edge before inserting a disc.

More information

For: – Latest firmware updates and latest compatible item list

– Any other latest information Visit <www.kenwood.com/cs/ce/>.

General

•This unit can only play the following CDs:

•For detailed information and notes about the playable audio files, visit <www.kenwood.com/cs/ce/audiofile/>.

ENGLISH 17

REFERENCES

Playable files

•Playable audio file:

For disc: MP3 (.mp3), WMA (.wma)

For USB mass storage class device: MP3 (.mp3), WMA (.wma), WAV (.wav), FLAC (.flac)

•Playable disc media: CD-R/CD-RW/CD-ROM

•Playable disc file format: ISO 9660 Level 1/2, Joliet, Long file name

•Playable USB device file system: FAT12, FAT16, FAT32

Even when audio files comply with the standards listed above, playback may be impossible depending on the types or conditions of media or device.

Unplayable discs

•Discs that are not round.

•Discs with coloring on the recording surface or discs that are dirty.

•Recordable/ReWritable discs that have not been finalized.

•8 cm CD. Attempting to insert using an adapter may cause malfunction.

About USB devices

•You cannot connect a USB device via a USB hub.

•Connecting a cable whose total length is longer than 5 m may result in abnormal playback.

•This unit cannot recognize a USB device whose rating is other than 5 V and exceeds 1 A.

About iPod/iPhone

Made for

–iPod touch (2nd, 3rd, 4th, 5th, and 6th generation)

–iPod classic

–iPod nano (3rd, 4th, 5th, 6th, and 7th generation)

–iPhone 3G, 3GS, 4, 4S, 5, 5S, 5C, 6, 6 Plus, 6S, 6S Plus, SE

•You cannot operate iPod if “KENWOOD” or “” is displayed on iPod.

•Depending on the version of the operating system of the iPod/iPhone, some functions may not operate on this unit.

About Android device

•This unit supports Android OS 4.1 and above.

•Some Android devices (with OS 4.1 and above) may not fully support Android Open Accessory (AOA) 2.0.

•If the Android device supports both mass storage class device and AOA 2.0, this unit always playback via AOA 2.0 as priority.

About Pandora

•Pandora is only available in certain countries.

For more information, visit <http://www.pandora.com/legal>.

•Because Pandora is a third-party service, the specifications are subject to change without prior notice. Accordingly, compatibility may be impaired, or some or all of the services may become unavailable.

•Some functions of Pandora cannot be operated from this unit.

•For issues using the application, please contact Pandora at [e-mail].

About iHeartRadio

•iHeartRadio® is a third-party service, therefore the specifications are subject to change without prior notice. Accordingly, compatibility may be impaired or some or all of the services may become unavailable.

•Some iHeartRadio® functionality cannot be operated from this unit.

18 ENGLISH

REFERENCES

Change the display information

Each time you press DISP, the display information changes.

• If the information is unavailable or not recorded, “NO TEXT”, “NO INFO”, or other information (eg. station name, playing time) appears.

Display information

Source name

/

/

/

STANDBY

Source name (Date/Clock)

Source name

(*)

Clock

(back to the beginning)

TUNER

Frequency (Date/Clock)

Frequency

(*)

Clock

(back to the beginning)

(For FM Radio Broadcast Data System stations only)

(For FM Radio Data System stations only)

Station name (Date/Clock)

Radio text (Date/Clock)

Radio text+ (R.TEXT+)

Station name

(*)

Radio text Radio text+

Title/Artist Frequency

Title (Artist)

Title (Date/Clock)

Frequency (Date/Clock)

(back to the

Clock (back to the beginning)

beginning)

CD or USB

(For CD-DA)

(For CD-DA)

Track title (Artist)

Track title (Disc name) Track title (Date/Clock)

Playing

Disc name/Artist

(*)

Track title/Artist

Playing time

Clock

(back to

time (Date/Clock)

(back to the beginning)

the beginning)

(For MP3/WMA/WAV/FLAC files)

(For MP3/WMA/WAV/FLAC files)

Track title (Artist)

Track title (Album title)

Track title (Date/Clock)

File

Track title/Artist

(*)

Album title/artist

Folder name

File name

name (Folder name) File name (Date/Clock)

Playing time (Date/Clock)

Playing time

Clock

(back to the beginning)

(back to the beginning)

iPod or ANDROID

When [MODE OFF]/[BROWSE MODE] is selected. (

8)

When [MODE OFF]/[BROWSE MODE] is selected. (

8)

Track title (Artist)

Track title (Album name)

Track title (Date/Clock)

Track title/Artist

(*)

Album title/Artist

Playing time

Clock

(back to

Playing time (Date/Clock)

(back to the beginning)

the beginning)

PANDORA

Station name (Date/Clock)

Shared/Radio station (Date/Clock)

Track title

Station name

(*)

Shared/Radio station

Track title

Artist

Album title

(Artist) Track title (Album title)

Track title (Date/Clock) Playing time

Playing time

Clock

(back to the beginning)

(Date/Clock) (back to the beginning)

IHEARTRADIO

Station name (Date/Clock)

Track title (Artist)

Track title (Date/Clock)

Station name

(*)

Track title/Artist Clock (back to the beginning)

(back to the beginning)

AUX

Source name (Date/Clock)

Source name

(*)

Clock

(back to the beginning)

* Only for : Turn off the display information.

ENGLISH 19

INSTALLATION/CONNECTION

Warning

•The unit can only be used with a 12 V DC power supply, negative ground.

•Disconnect the battery’s negative terminal before wiring and mounting.

•Do not connect Battery wire (yellow) and Ignition wire (red) to the car chassis or Ground wire (black) to prevent a short circuit.

•Insulate unconnected wires with vinyl tape to prevent a short circuit.

•Be sure to ground this unit to the car’s chassis again after installation.

Caution

•For safety’s sake, leave wiring and mounting to professionals. Consult the car audio dealer.

•Install this unit in the console of your vehicle. Do not touch the metal parts of this unit during and shortly after use of the unit. Metal parts such as the heat sink and enclosure become hot.

•Do not connect the [ wires of speakers to the car chassis or Ground wire (black), or connect them in parallel.

•Mount the unit at an angle of less than 30º.

•If your vehicle wiring harness does not have the ignition terminal, connect Ignition wire (red) to the terminal on the vehicle’s fuse box which provides 12 V DC power supply and is turned on and off by the ignition key.

•Keep all cables away from heat dissipate metal parts.

•After the unit is installed, check whether the brake lamps, blinkers, wipers, etc. on the car are working properly.

•If the fuse blows, first make sure the wires are not touching car’s chassis, then replace the old fuse with one that has the same rating.

Basic procedure

1Remove the key from the ignition switch, then disconnect the [ terminal of the car battery.

2Connect the wires properly.

See Wiring connection. ( 21)

3Install the unit to your car.

See Installing the unit (in-dash mounting).

4 Connect the [ terminal of the car battery.

5 Reset the unit. ( 3)

Installing the unit (in-dash mounting)

Hook on the top side

Orientate the trim plate as illustrated before fitting.

Do the required wiring.

( 21)

Dashboard of your car

Bend the appropriate tabs to hold the mounting sleeve firmly in place.

When installing without the mounting sleeve

1 Remove the mounting sleeve and trim plate from the unit.

2 Align the holes in the unit (on both sides) with the vehicle mounting bracket and secure the unit with screws (supplied/commercially available).

Use only the specified screws. Using wrong screws might damage the unit.

How to remove the unit

1 Detach the faceplate.

2 Fit the catch pin on the extraction keys into the holes on both sides of the trim plate, then pull it out.

3 Insert the extraction keys deeply into the slots on each side, then follow the arrows as shown on the illustration.

20 ENGLISH

Wiring connection

IMPORTANT: We recommend installing the unit with a commercially available custom wiring harness specific for your car and leave this job to professionals for your safety. Consult your car audio dealer.

When connecting to an external amplifier, connect its ground wire to the car’s chassis to avoid damaging the unit.

Front output

Rear/subwoofer output

Rear/subwoofer output

Fuse (10 A)

Antenna terminal

White

To front speaker (left)	White/Black
	Gray
To front speaker (right)	Gray/Black
	Green
To rear speaker (left)	Green/Black
	Purple

If no connections are made, do not let the wire come out from the tab.

Brown

(Mute control wire)

To the terminal that is grounded when the telephone rings or during conversation

( 17)

(To connect the Kenwood navigation system, refer your navigation manual.)

	To rear speaker (right)	Purple/Black
	Ignition switch		Blue/White
	Car fuse box		(Power control wire/
		Red	Antenna control wire)
		(Ignition wire)
		Yellow	Light blue/yellow
	Car fuse box	(Battery wire)	(Steering remote
		Black (Ground wire)	control wire)

To the power control terminal when using the optional power amplifier or to the antenna control terminal in the vehicle

To the steering wheel remote control adapter

To the metallic body or chassis of the car Battery

Part list for installation

(A)Faceplate

(B)Trim plate

(C)Mounting sleeve

(D)Wiring harness

(E)Extraction key

(F)Screws (supplied for )

ENGLISH 21