Kenwood KDC-102UR User manual

KDC-364U KDC-264UB KDC-164UR

KDC-164UG KDC-121RY KDC-164UB KDC-102UR KDC-131Y

CD-RECEIVER

INSTRUCTION MANUAL

CD-RECEIVER

BEDIENUNGSANLEITUNG

CD-PECИBEP

ИHCTPУKЦИЯ ПO ЭKCПЛУATAЦИИ

CD-РЕСІВЕР

ІНСТРУКЦІЯ З ЕКСПЛУАТАЦІЇ

© 2014 JVC KENWOOD Corporation

B5A-0138-10 (EN/E2N)

Information on Disposal of Old Electrical and Electronic Equipment and Batteries (applicable for countries that have adopted separate waste collection systems)

Products and batteries with the symbol (crossed-out wheeled bin) cannot be disposed as household waste.

Old electrical and electronic equipment and batteries should be recycled at a facility capable of handling these items and their waste byproducts.

Contact your local authority for details in locating a recycle facility nearest to you. Proper recycling and waste disposal will help conserve resources whilst preventing detrimental effects on our health and the environment.

Notice: The sign “Pb” below the symbol for batteries indicates that this battery contains lead.

Entsorgung von gebrauchten elektrischen und elektronischen Geräten und Batterien (anzuwenden in Ländern mit einem separaten Sammelsystem für solche Geräte)

Das Symbol (durchgestrichene Mülltonne) auf dem Produkt oder seiner Verpackung weist darauf hin, dass dieses Produkt nicht als normaler Haushaltsabfall behandelt werden darf, sondern an einer Annahmestelle für das Recycling von elektrischen und elektronischen Geräten und batterien abgegeben werden muss.

Durch Ihren Beitrag zur korrekten Entsorgung dieses Produktes schützen Sie die Umwelt und die Gesundheit Ihrer Mitmenschen.

Unsachgemässe oder falsche Entsorgung gefährden Umwelt und Gesundheit. Weitere Informationen über das Recycling dieses Produktes erhalten Sie von Ihrer Gemeinde oder den kommunalen Entsorgungsbetrieben.

Achtung: Das Zeichen „Pb“ unter dem Symbol fur Batterien zeigt an, dass diese Batterie Blei enthalt.

For Israel

Declaration of Conformity with regard to the EMC Directive 2004/108/EC Declaration of Conformity with regard to the RoHS Directive 2011/65/EU Manufacturer:

JVC KENWOOD Corporation

3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, Japan

EU Representative:

JVCKENWOOD NEDERLAND B.V.

Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands

Konformitätserklärung in Bezug auf die EMC-Vorschrift 2004/108/EC Konformitätserklärung in Bezug auf die RoHS-Vorschrift 2011/65/EU Hersteller:

JVC KENWOOD Corporation

3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, Japan

EU-Vertreter:

JVCKENWOOD NEDERLAND B.V.

Amsterdamseweg 37, 1422 AC UITHOORN, Niederlande

Декларация соответствия относительно Директивы 2004/108/EC Электромагнитная совместимость

Декларация соответствия относительно Директивы 2011/65/EU об ограничении содержания вредных веществ Производитель:

ДжейВиСи КЕНВУД Корпорейшн

3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, Япония

Представительство в EC:

ДжейВиСиКЕНВУД Нидерланд Би.Ви. Amsterdamseweg 37, 1422 AC UITHOORN, Нидерланды

Декларація про відповідність вимогам Директиви EMC 2004/108/EC Декларація про відповідність вимогам Директиви RoHS 2011/65/EU Виробник:

JVC KENWOOD Corporation

3-12 Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, Japan

Представник у ЕС:

JVCKENWOOD NEDERLAND B.V.

Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands

i

The marking of products using lasers

The label is attached to the chassis/case and says that the component uses laser beams that have been classified as Class 1. It means that the unit is utilizing laser beams that are of a weaker class. There is no danger of hazardous radiation outside the unit.

Kennzeichnung von Geräten mit Laser-Abtastern

Das Etikett ist am Chassis/Gehäuse angebracht und besagt, dass sich die Komponente Laserstrahlen bedient, die als Laserstrahlen der Klasse 1 klassifiziert wurden. Dies weist darauf hin, dass sich das Gerät Laserstrahlen bedient, die einer schwächeren Klasse angehören. Das bedeutet, dass durch den sehr schwachen Laserstrahl keine Gefahr durch gefährliche Strahlungen außerhalb des Geräts besteht.

Маркировка изделий, использующих лазеры

К корпусу устройства прикреплена табличка, указывающая, что устройство использует лазерные лучи класса 1. Это означает, что в устройстве используются лазерные лучи слабой интенсивности. Они не представляют опасности и не распространяют опасную радиацию вне устройства.

Маркування виробів, обладнаних лазером

На каркас/корпус поміщається наклейка, в якій зазначається, що даний виріб випромінюєє лазерні промені Класу 1. Це означає, що даний апарат використовує лазерні промені слабшого класу. За межами даного апарату не існує небезпеки лазерного випромінювання.

For Turkey

Bu ürün 28300 sayılı Resmi Gazete’de yayımlanan Atik Elektrikli ve Elektronik Eşyalarin Kontrolü Yönetmeliğe uygun olarak üretilmiştir.

Eski Elektrik ve Elektronik Ekipmanların İmha Edilmesi Hakkında Bilgi (atık yan ürün toplama sistemlerini kullanan ülkeleri için uygulanabilir)

Sembollü (üzerinde çarpı işareti olan çöp kutusu) ürünler ev atıkları olarak

atılamaz.

Eski elektrik ve elektronik ekipmanlar, bu ürünleri ve ürün atıklarını geri dönüştürebilecek bir tesiste değerlendirilmelidir. Yaşadığınız bölgeye en yakın geri dönüşüm tesisinin yerini öğrenmek için yerel makamlara müracaat edin. Uygun geri dönüşüm ve atık imha yöntemi sağlığımız ve çevremiz üzerindeki zararlı etkileri önlerken kaynakların korunmasına da yardımcı olacaktır.

Дата изготовления (месяц/год) находится на этикетке устройства.

В соответствии с Законом Российской Федерации “О защите прав потребителей” срок службы (годности) данного товара “по истечении которого он может представлять опасность для жизни, здоровья потребителя, причинять вред его имуществу или окружающей среде” составляет семь (7) лет со дня производства. Этот срок является временем, в течение которого потребитель данного товара может безопасно им пользоваться при условии соблюдения инструкции по эксплуатации данного товара, проводя необходимое обслуживание, включающее замену расходных материалов и/или соответствующее ремонтное обеспечение в специализированном сервисном центре.

Дополнительные косметические материалы к данному товару, поставляемые вместе с ним, могут храниться в течение двух (2) лет со дня его производства.

Срок службы (годности), кроме срока хранения дополнительных косметических материалов, упомянутых в предыдущих двух пунктах, не затрагивает никаких других прав потребителя, в частности, гарантийного свидетельства KENWOOD, которое он может получить в соответствии с законом о правах потребителя или других законов, связанных с ним.

Декларація про Відповідність Вимогам Технічного Регламенту Обмеження Використання деяких Небезпечних Речовин в електричному та електронному обладнанні (затвердженого Постановою №1057 Кабінету Міністрів України)

Виріб відповідає вимогам Технічного Регламенту Обмеження Використання деяких Небезпечних Речовин в електричному та електронному обладнанні (ТР ОВНР).

Вміст небезпечних речовин у випадках, не обумовлених в Додатку №2 ТР ОВНР:

1.свинець(Pb) – не перевищує 0.1 % ваги речовини або в концентрації до 1000 частин на мільйон;

2.кадмій (Cd)– не перевищує 0.01 % ваги речовини або в концентрації до 100 частин на мільйон;

3.ртуть(Hg) – не перевищує 0.1 % ваги речовини або в концентрації до 1000 частин на мільйон;

4.шестивалентний хром (Cr 6+) – не перевищує 0.1 % ваги речовини або в концентрації до 1000 частин на мільйон;

5.полібромбіфеноли (PBB) – не перевищує 0.1% ваги речовини або в концентрації до 1000 частин на мільйон;

6.полібромдефенілові ефіри (PBDE) – не перевищує 0.1 % ваги речовини або в концентрації до 1000 частин на мільйон.

ii

CONTENTS

	BEFORE USE	2
	BASICS	3
	GETTING STARTED	4
	RADIO	5
	CD / USB / iPod / ANDROID	7
	AUX	9
	DISPLAY SETTINGS	9
	AUDIO SETTINGS	10
	TROUBLESHOOTING	11
	MORE INFORMATION	12
	SPECIFICATIONS	13
	INSTALLATION /
	CONNECTION	14

How to read this manual

•Operations are explained mainly using buttons on the faceplate of .

•[XX] indicates the selected items.

•( XX) indicates references are available on the stated page.

BEFORE USE

Warning

Do not operate any function that takes your attention away from safe driving.

Caution

Volume setting:

•Adjust the volume so that you can hear sounds outside the car to prevent accidents.

•Lower the volume before playing digital sources to avoid damaging the speakers by the sudden increase of the output level.

General:

•Avoid using the external device if it might hinder safe driving.

•Make sure all important data has been backed up. We shall bear no responsibility for any loss of recorded data.

•Never put or leave any metallic objects (such as coins or metal tools) inside the unit, to prevent a short circuit.

•If a disc error occurs due to condensation on the laser lens, eject the disc and wait for the moisture to evaporate.

Remote control (RC-406):

•Do not leave the remote control in hot places such as on the dashboard.

•The Lithium battery is in danger of explosion if replaced incorrectly. Replace it only with the same or equivalent type.

•The battery pack or batteries shall not be exposed to excessive heat such as sunshine, fire or the like.

•Keep the battery out of reach of children and in its original packaging when not in used. Dispose of used batteries promptly. If swallowed, contact a physician immediately.

Maintenance

Cleaning the unit: Wipe off dirt on the faceplate with a dry silicone or soft cloth.

Cleaning the connector: Detach the faceplate and clean the connector gently with a cotton swab, being careful not to damage the connector.

Handling discs:

•Do not touch the recording surface of the disc.

•Do not stick tape etc. on the disc, or use a disc with tape stuck on it.

•Do not use any accessories for the disc.

•Clean from the center of the disc and move outward.

•Clean the disc with a dry silicone or soft cloth. Do not use any solvents.

•When removing discs from this unit, pull them out horizontally.

•Remove burrs from the center hole and disc edge before inserting a disc.

Connector (on the reverse side of the faceplate)

2

BASICS
Faceplate	Display window	Attach	Remote control (RC-406) (supplied for		)
				Remote sensor (Do not
				expose to bright sunlight.)
Volume knob
(turn/press)	Loading slot	Detach
			* Not used	Pull out the
				insulation sheet
				when using for
				the first time.
			Remote control functions are not available for
		How to reset	/	/	/
			/	/	/
			.
Detach button			How to replace the battery

Your preset adjustments will also be erased.

To	On the faceplate		On the remote control
Turn on the power	Press	.	Press and hold SRC to turn off the power.
	• Press and hold to turn off the power.		( Pressing SRC does not turn on the power. )
Adjust the volume	Turn the volume knob.		Press	or	.

Press ATT during playback to attenuate the sound.

• Press again to cancel.

	Select a source	Press	repeatedly.	Press SRC repeatedly.
	Change the display	Press	repeatedly.	( not available )
	information	• Press and hold to scroll the current display information.

ENGLISH 3

GETTING STARTED

1Select the display language and cancel the demonstration

When you turn on the power (or after you reset the unit), the display shows: “SEL LANGUAGE” “PRESS” “VOLUME KNOB”

1Turn the volume knob to select [ENG] (English) or [RUS] (Russian), then press the knob.

[ENG] is selected for the initial setup.

Then, the display shows: “CANCEL DEMO” “PRESS” “VOLUME KNOB”.

2Press the volume knob.

[YES] is selected for the initial setup.

3Press the volume knob again.

“DEMO OFF” appears.

2Set the clock

1 Press the volume knob to enter [FUNCTION].

2 Turn the volume knob to select [CLOCK], then press the knob.

3 Turn the volume knob to select [CLOCK ADJUST], then press the knob.

4Turn the volume knob to make the settings, then press the knob.

Day Hour Minute

5 Turn the volume knob to select [CLOCK FORMAT], then press the knob. 6 Turn the volume knob to select [12H] or [24H], then press the knob. 7 Press and hold to exit.

To return to the previous setting item, press .

(For / / / /

/ ) While in clock display screen...

Press and hold to enter clock adjustment mode directly.

Then, perform step 4 to set the clock.

3Set the initial settings

1 Press to enter STANDBY.

2Press the volume knob to enter [FUNCTION].

For / , pressing AUD enter [AUDIO CONTROL] directly.

3Turn the volume knob to make a selection (see the following table), then press the knob.

4 Repeat step 3 until the desired item is selected or activated. 5 Press and hold to exit.

To return to the previous setting item, press .

										Default: XX
AUDIO CONTROL
	SWITCH	(Except for					/			)
	PREOUT	REAR/ SUB-W: Selects whether rear speakers or a subwoofer are
		connected to the line out terminals on the rear (through an external
		amplifier).
	SP SELECT	OFF/ 5/4/ 6 × 9/6/ OEM: Selects according to the speaker size (5 inches
		or 4 inches, 6×9 inches or 6 inches) or OEM speakers for optimum
		performance.
DISPLAY
	EASY MENU	(For			/				)
		ON: Both display and button illumination change to white color when
		entering [FUNCTION]. ; OFF: Both display and button illumination
		remain as [COLOR SELECT] color. (							9)

4

GETTING STARTED

TUNER SETTING

		PRESET TYPE				NORMAL: Memorizes one station for each preset button in each band (FM1/
						FM2/ FM3/ MW/ LW). ; MIX: Memorizes one station for each preset button,
						regardless of the selected band.
	SYSTEM
		KEY BEEP				ON: Activates the keypress tone. ; OFF: Deactivates.
		SOURCE SELECT
			BUILT-IN AUX			ON: Enables AUX in source selection. ; OFF: Disables. ( 9)
		P-OFF WAIT				Applicable only when the demonstration mode is turned off.
						Sets the duration when the unit will automatically turn off (while in standby
						mode) to save the battery.
						20M: 20 minutes ; 40M: 40 minutes ; 60M: 60 minutes ;
						WAIT TIME – – –: Cancels
		CD READ				1: Automatically distinguishes between audio file disc and music CD. ;
						2: Forces to play as a music CD. No sound can be heard if an audio file disc is
						played.
		F/W UPDATE
			UPDATE SYSTEM
				F/W UP xx.xx		YES: Starts upgrading the firmware. ; NO: Cancels (upgrading is not
						activated).
						For details on how to update the firmware, see: www.kenwood.com/cs/ce/
	CLOCK
		CLOCK DISPLAY				ON: The clock time is shown on the display even when the unit is turned off. ;
						OFF: Cancels.
	ENGLISH					Selected language is use as the display langauge for [FUNCTION] menu
						and Tag information (folder name, file name, song title, artist name, album
	РУССКИЙ
						name) if applicable.

RADIO

Search for a station

1 Press repeatedly to select TUNER.

2Press repeatedly (or press / on RC-406) to select FM1/ FM2/ FM3/ MW/ LW.

3Press S / T (or press S / on RC-406) to search for a station.

•To change the searching method for S / T: Press repeatedly.

AUTO1 : Automatically search for a station. AUTO2 : Search for a preset station. MANUAL : Manually search for a station.

•To store a station: Press and hold one of the number buttons (1 to 6).

•To select a stored station: Press one of the number buttons (1 to 6) (or press one of the number buttons (1 to 6) on RC-406).

Direct Access Tuning (using RC-406) (for )

1Press DIRECT to enter Direct Access Tuning.

“– – – • –” (for FM) or “– – – –” (for MW/ LW) appears on the display.

2 Press the number buttons to enter a frequency.

3Press to search for a station.

•To cancel, press or DIRECT.

•If no operation is done for 10 seconds after step 2, Direct Access Tuning is automatically canceled.

ENGLISH 5

RADIO

Other settings

1 Press the volume knob to enter [FUNCTION].

2Turn the volume knob to make a selection (see the following table), then press the knob.

3 Repeat step 2 until the desired item is selected or activated. 4 Press and hold to exit.

To return to the previous setting item, press .

Default: XX

TUNER SETTING

LOCAL SEEK* ON: Searches only stations with good reception. ; OFF: Cancels.

•Settings made are applicable only to the selected source/station. Once you change the source/station, you need to make the settings again.

AUTO	YES: Automatically starts memorizing 6 stations with good reception. ; NO: Cancels.
MEMORY	• Selectable only if [NORMAL] is selected for [PRESET TYPE]. ( 5)
MONO SET	ON: Improves the FM reception, but the stereo effect may be lost. ; OFF: Cancels.
NEWS SET	ON: The unit will temporarily switch to News Programme if available. ; OFF: Cancels.
REGIONAL	ON: Switches to another station only in the specific region using the “AF” control. ;
	OFF: Cancels.
AF SET	ON: Automatically searches for another station broadcasting the same program
	in the same Radio Data System network with better reception when the current
	reception is poor. ; OFF: Cancels.
TI*	ON: Allows the unit to temporarily switch to Traffic Information if available (“TI”
	lights up). ; OFF: Cancels.
PTY SEARCH	Press the volume knob to enter PTY language selection. Turn the volume knob to
	select the PTY language (ENGLISH/ FRENCH/ GERMAN), then press the knob.
	Selects the available Program Type (see the following), then, press S / T to
	start.

CLOCK

TIME SYNC	ON: Synchronizes the unit’s time to the Radio Data System station
	time. ; OFF: Cancels.

* Only for FM source.

•[LOCAL SEEK]/ [MONO SET]/ [NEWS SET]/ [REGIONAL]/ [AF SET]/ [TI]/ [PTY SEARCH] is selectable only when the band is FM1/ FM2/ FM3.

•Available Program Type:

SPEECH: NEWS, AFFAIRS, INFO (information), SPORT, EDUCATE, DRAMA, CULTURE, SCIENCE, VARIED, WEATHER, FINANCE, CHILDREN, SOCIAL, RELIGION, PHONE IN, TRAVEL, LEISURE, DOCUMENT

MUSIC: POP M (music), ROCK M (music), EASY M (music), LIGHT M (music), CLASSICS, OTHER M (music), JAZZ, COUNTRY, NATION M

(music), OLDIES, FOLK M (music)

The unit will search for the Program Type categorized under [SPEECH] or [MUSIC] if selected.

•If the volume is adjusted during reception of traffic information, alarm or news bulletin, the adjusted volume is memorized automatically. It will be applied the next time traffic information, alarm or news bulletin is turned on.

6

CD / USB / iPod / ANDROID

Start playback

The source changes automatically and playback starts.

M Eject disc

Label side

USB input terminal

USB

CA-U1EX (max.: 500 mA) (optional accessory)

iPod/iPhone

(for			/
		)

KCA-iP102 / KCA-iP103 (optional accessory)*1 or accessory cable of the iPod/iPhone*2

ANDROID*3

Micro USB 2.0 cable*2 (commercially available)

*1
	KCA-iP102 : 30-pin type, KCA-iP103 : Lightning type
*2	Do not leave the cable inside the car when not using.

To			On the faceplate						On the remote control
Playback / pause			Press			.			Press	.
Reverse / Fast-forward*4			Press and hold S / T.						Press and hold S /		.
Select a track/file			Press S / T.						Press S /	.
Select a folder*5			Press J / K.						Press	/	.
Repeat play*6			Press			repeatedly.

					TRACK REPEAT/ REPEAT OFF			: Audio CD
					FILE REPEAT/ FOLDER REPEAT/ REPEAT OFF : MP3/WMA/WAV file, iPod or
								ANDROID
					FILE REPEAT/ REPEAT OFF			: KME Light/ KMC file*7
Random play*6					Press	or	repeatedly.
					DISC RANDOM/ RANDOM OFF			: Audio CD
					FOLDER RANDOM/ RANDOM OFF : MP3/WMA/WAV file, KME Light/ KMC
								file, iPod or ANDROID
					Press and hold		or	to select ALL RANDOM.*8
Select control mode					While in iPod source, press and hold iPod.
(for				/	MODE ON : Control from the iPod*9
			)		MODE OFF : Control from the unit
					While in ANDROID source, ( 8, [ANDROID SETUP])
Select music drive					Press 5 repeatedly.
( 8, [MUSIC DRIVE])					The stored songs in the following start playback.
					• Selected internal or external memory of a smartphone (Mass Storage

Class).

• Selected drive of a multiple drives device.

ENGLISH 7

CD / USB / iPod / ANDROID

*3	When connecting an Android device, “Press [VIEW] to install KENWOOD MUSIC PLAY APP” is
	shown. Follow the instructions to install the application. You can also install the latest version
*4	of KENWOOD MUSIC PLAY application on your Android device before connecting. ( 12)
	For ANDROID: Applicable only when [BROWSE MODE] is selected. ( [ANDROID SETUP])
*5	For CD: Only for MP3/WMA files. This does not work for iPod/ ANDROID.
*6	For iPod/ ANDROID: Applicable only when [MODE OFF]/ [BROWSE MODE] is selected.
*7	KME Light : KENWOOD Music Editor Light, KMC : KENWOOD Music Control ( 12)
*8	For CD: Only for MP3/WMA files.
*9	You can still play/pause, file skip, fast-forward or reverse files from the unit.
Select a file from a folder/list
1	Press	.
2	Turn the volume knob to select a folder/list, then press the knob.
3	Turn the volume knob to select a file, then press the knob.

Quick Search

If you have many files, you can search through them quickly.

For USB (for KME Light/ KMC files):

Press S / T to search at a preset skip search ratio. ([SKIP SEARCH]) Press and hold S / T to search at a 10% ratio.

• Not applicable for CD and MP3/WMA/WAV files.

For iPod:

You can search for a file according to the first character.

Turn the volume knob quickly to enter character search. Turn the volume knob to select the character.

To search for a character other than A to Z and 0 to 9, enter only “*”.

Press S / T to move to the entry position.

• You can enter up to 3 characters.

Press the volume knob to start searching.

•To return to the root folder/ first file/ top menu, press 5.

•To return to the previous setting item, press .

•To cancel, press and hold .

•For iPod, applicable only when [MODE OFF] is selected. ( 7)

•For ANDROID, applicable only when [BROWSE MODE] is selected. ( [ANDROID SETUP])

Direct Music Search (using RC-406) (for )

1 Press DIRECT.

2 Press the number buttons to enter a track/file number. 3 Press to search for music.

•To cancel, press or DIRECT.

•Not available if Random Play is selected.

•Not applicable for iPod, ANDROID, KME Light/ KMC file.

Listen to TuneIn Radio/ TuneIn Radio Pro/ Aupeo

(for / )

While listening to TuneIn Radio, TuneIn Radio Pro or Aupeo, connect the iPod/iPhone to the USB input terminal of the unit.

• The unit will output the sound from these applications.

Other settings

1 Press the volume knob to enter [FUNCTION].

2Turn the volume knob to make a selection (see the following table), then press the knob.

3 Repeat step 2 until the desired item is selected or activated. 4 Press and hold to exit.

To return to the previous setting item, press .

Default: XX

ANDROID SETUP

BROWSE MODE: Control from the unit (using KENWOOD MUSIC PLAY application). ; HAND MODE: Control other media player applications from the Android device (without using KENWOOD MUSIC PLAY application). However, you can still play/pause and file skip from the unit.

USB

	MUSIC DRIVE	DRIVE CHANGE: The next drive ([DRIVE 1] to [DRIVE 5]) is selected
		automatically and playback starts.
		Repeat steps 1 to 3 to select the following drives.
	SKIP SEARCH	0.5%/ 1%/ 5%/ 10%: While listening to iPod, ANDROID or KME Light/
		KMC file, selects the skip search ratio over the total files.

8

AUX

Preparation:

Select [ON] for [BUILT-IN AUX]. ( 5)

Start listening

1 Connect a portable audio player (commercially available).

Auxiliary input jack

Portable audio player

3.5 mm stereo mini plug with “L” shaped connector (commercially available)

2 Press repeatedly to select AUX.

3 Turn on the portable audio player and start playback.

Set the AUX name

While listening to a portable audio player connected to the unit...

1 Press the volume knob to enter [FUNCTION].

2 Turn the volume knob to select [SYSTEM], then press the knob.

3 Turn the volume knob to select [AUX NAME SET], then press the knob.

4Turn the volume knob to make a selection, then press the knob.

AUX (default)/ DVD/ PORTABLE/ GAME/ VIDEO/ TV

5 Press and hold to exit.

To return to the previous setting item, press .

Muting upon the reception of a phone call

Connect the MUTE wire to your telephone using a commercial telephone accessory. ( 15)

When a call comes in, “CALL” appears. (The audio system pauses.)

• To continue listening to the audio system during a call, press . “CALL” disappears and the audio system resumes.

When the call ends, “CALL” disappears. (The audio system resumes.)

DISPLAY SETTINGS

1 Press the volume knob to enter [FUNCTION].

2 Turn the volume knob to select [DISPLAY], then press the knob.

3Turn the volume knob to make a selection (see the following table), then press the knob.

4Repeat step 3 until the desired item is selected/activated or follow the instructions stated on the selected item.

5 Press and hold

to exit.

To return to the previous setting item, press .

	Default: XX
COLOR	VARIABLE SCAN/ CUSTOM R/G/B/ preset colors*2: Selects your
SELECT*1	preferred key and display illumination color.

You can create your own color (when [CUSTOM R/G/B] or preset colors*2 is selected). The color you have created can stored in [CUSTOM R/G/B].

1Press and hold the volume knob to enter the detailed color adjustment.

2 Press S / T to select the color (R/ G/ B) to adjust.

3Turn the volume knob to adjust the level (0 — 9), then press the knob.

DIMMER			ON: Dims the display illumination (and button illumination*1). ;
			OFF: Cancels.
BRIGHTNESS			0 — 31: Selects your preferred brightness level for display illumination
			(and button illumination*1).
TEXT SCROLL			AUTO/ ONCE: Selects whether to scroll the display information
			automatically, or scroll only once. ; OFF: Cancels.
*1	For		/		.
*2	Preset colors: RED1/ RED2/ RED3/ PURPLE1/ PURPLE2/ PURPLE3/ PURPLE4/ BLUE1/
	BLUE2/ BLUE3/ SKYBLUE1/ SKYBLUE2/ LIGHTBLUE/ AQUA1/ AQUA2/ GREEN1/
	GREEN2/ GREEN3/ YELLOWGREEN1/ YELLOWGREEN2/ YELLOW/ ORANGE1/
	ORANGE2/ ORANGERED

ENGLISH 9

AUDIO SETTINGS

While listening to any source...

1 Press the volume knob to enter [FUNCTION].

2Turn the volume knob to select [AUDIO CONTROL], then press the knob.

For / , pressing AUD enter [AUDIO CONTROL] directly.

3Turn the volume knob to make a selection (see the following table), then press the knob.

4 Repeat step 3 until the desired item is selected or activated.

5Press and hold to exit.

(or using RC-406) (for )

1 Press AUD to enter [AUDIO CONTROL].

2 Press J/ K to make a selection, then press .

To return to the previous setting item, press .

			Default: XX
SUB-W LEVEL*		–15 to +15 (0)	Adjusts the subwoofer output level.
BASS LEVEL		–8 to +8 (+6)	Adjusts the level to memorize for each source. (Before
MID LEVEL		–8 to +8 (+5)	making an adjustment, select the source you want to
TRE LEVEL		–8 to +8 (0)	adjust.)
EQ PRO
	BASS ADJUST	BASS CTR FRQ	60/ 80/ 100/ 200 or 60HZ/ 80HZ/ 100HZ/ 200HZ:
			Selects the center frequency.
		BASS LEVEL	–8 to +8 (+6): Adjusts the level.
		BASS Q FACTOR	1.00/ 1.25/ 1.50/ 2.00: Adjusts the quality factor.
		BASS EXTEND	ON: Turns on the extended bass. ; OFF: Cancels.
	MID ADJUST	MID CTR FRQ	0.5K/ 1.0K/ 1.5K/ 2.5K or 0.5KHZ/ 1.0KHZ/ 1.5KHZ/
			2.5KHZ: Selects the center frequency.
		MID LEVEL	–8 to +8 (+5): Adjusts the level.
		MID Q FACTOR	0.75/ 1.00/ 1.25: Adjusts the quality factor.
	TRE ADJUST	TRE CTR FRQ	10.0K/ 12.5K/ 15.0K/ 17.5K or 10.0KHZ/ 12.5KHZ/
			15.0KHZ/ 17.5KHZ: Selects the center frequency.
		TRE LEVEL	–8 to +8 (0): Adjusts the level.

10

PRESET EQ	DRIVE EQ/ TOP40/ POWERFUL/ ROCK/ POPS/ EASY/ JAZZ/
	NATURAL/ USER: Selects a preset equalizer suitable to the music
	genre. (Select [USER] to use the customized settings.)
	[DRIVE EQ] is a preset equalizer that reduces noise outside the car or
	running noise of the tyres.
BASS BOOST	LV1/ LV2/ LV3 or LEVEL1/ LEVEL2/ LEVEL3: Selects your preferred
	bass boost level. ; OFF: Cancels.
LOUDNESS	LV1/ LV2 or LEVEL1/ LEVEL2: Selects your preferred low and high
	frequencies boost to produce a well-balanced sound at a low volume
	level. ; OFF: Cancels.
SUBWOOFER SET*	ON: Turns on the subwoofer output. ; OFF: Cancels.
LPF SUBWOOFER*	THROUGH: All signals are sent to the subwoofer. ; 85HZ/ 120HZ/
	160HZ: Audio signals with frequencies lower than 85 Hz/ 120 Hz/
	160 Hz are sent to the subwoofer.
SUB-W PHASE*	REVERSE (180°)/ NORMAL (0°): Selects the phase of the subwoofer
	output to be in line with the speaker output for optimum
	performance. (Selectable only if a setting other than [THROUGH] is
	selected for [LPF SUBWOOFER].)
HPF	(For		)
	THROUGH: All signals are sent to the speakers. ; 100HZ/ 120HZ/
	150HZ: Audio signals with frequencies higher than 100 Hz/ 120 Hz/
	150 Hz are sent to the speakers.
FADER	R15 to F15 (0): Adjusts the rear and front speaker output balance.
BALANCE	L15 to R15 (0): Adjusts the left and right speaker output balance.
VOLUME OFFSET	For AUX: –8 to +8 (0) ; For other sources: –8 to 0: Presets the volume
	adjustment level of each source. (Before adjustment, select the source
	you want to adjust.)
SOUND RECNSTR	ON: Creates realistic sound by compensating the high-frequency
(Sound	components and restoring the rise-time of the waveform that are lost
reconstruction)	in audio data compression. ; OFF: Cancels.

•[SUB-W LEVEL]/ [SUBWOOFER SET]/ [LPF SUBWOOFER]/ [SUB-W PHASE] is selectable only if [SWITCH PREOUT] is set to [SUB-W]. ( 4)

•[SUB-W LEVEL]/ [LPF SUBWOOFER]/ [SUB-W PHASE] is selectable only if

[SUBWOOFER SET] is set to [ON]. * Except for .

TROUBLESHOOTING

	Symptom		Remedy
		Sound cannot be heard.	• Adjust the volume to the optimum level.
			• Check the cords and connections.
		“MISWIRING CHECK WIRING	Turn the power off, then check to be sure the terminals
		THEN PWR ON” appears.	of the speaker wires are insulated properly. Turn the
			power on again.
	General
		appears.	Send the unit to the nearest service center.
		“PROTECTING SEND SERVICE”
		• Sound cannot be heard.	Clean the connectors. ( 2)
		• The unit does not turn on.
		• Information shown on the
		display is incorrect.
		The unit does not work at all.	Reset the unit. ( 3)
	Radio	• Radio reception is poor.	• Connect the antenna firmly.
		• Static noise while listening	• Pull the antenna out all the way.
		to the radio.
		Disc cannot be ejected.	Press and hold M to forcibly eject the disc. Be careful
			not to drop the disc when it is ejected. If this does not
			solve the problem, reset the unit. ( 3)
		Noise is generated.	Skip to another track or change the disc.
	iPod	Tracks do not play back as	Playback order is determined when files are recorded.
		you intended them to play.
	USB /
		“READING” keeps flashing.	Do not use too many hierarchical levels or folders.
	CD /
		Elapsed playing time is not	This is caused by how the tracks are recorded.
		correct.
		Correct characters are not	This unit can only display uppercase letters, numbers,
		displayed (e.g. album name).	and a limited number of symbols. Uppercase Cyrillic
			letters can also be displayed if [РУССКИЙ] is selected.
			( 5)

	Symptom		Remedy
		“NA FILE”	Make sure the disc contains supported audio files. ( 12)
		“NO DISC”	Insert a playable disc into the loading slot.
		“TOC ERROR”	Make sure the disc is clean and inserted properly.
		“PLEASE EJECT”	Reset the unit. If this does not solve the problem, consult
			your nearest service center.
	iPod	“READ ERROR”	Copy the files and folders onto the USB device again. If this
			does not solve the problem, reset the USB device or use
	/		another USB device.
	/USB
		“NO DEVICE”	Connect a USB device, and change the source to USB again.
	CD
		“COPY PRO”	A copy-protected file is played.
		“NA DEVICE”	Connect a supported USB device, and check the
			connections.
		“NO MUSIC”	Connect a USB device that contains playable audio files.
		“iPod ERROR”	•	Reconnect the iPod.
			•	Reset the iPod.
		• Sound cannot be heard	• Reconnect the Android device.
		during playback.	• If in [HAND MODE], launch any media player
	ANDROID	• Sound output only	•	application on the Android device and start playback.
		from the Android		Restart the Android device.
			•	If in [HAND MODE], relaunch the current media player
		device.		application or use another media player application.
			• If this does not solve the problem, the connected
				Android device is unable to route the audio signal to
				unit. ( 12)

ENGLISH 11

TROUBLESHOOTING

Symptom		Remedy
	Cannot playback at	• Make sure KENWOOD MUSIC
	[BROWSE MODE].	PLAY APP is installed on the
		Android device. ( 8)
		• Reconnect the Android device
		and make the appropriate
		setting in [ANDROID SETUP].
		( 8)
		• If this does not solve the
		problem, the connected
		Android device does not support
		[BROWSE MODE]. (	About
ANDROID		Android device)
	“NO DEVICE” or	• Switch off the developer options
	“READING” keeps	on the Android device.
	flashing.	• Reconnect the Android device.
		• If this does not solve the
		problem, the connected
		Android device does not support
		[BROWSE MODE]. (	About
		Android device)
	Playback is	Turn off the power saving mode
	intermittent or	on the Android device.
	sound skips.
	“ANDROID ERROR” /	• Reconnect the Android device.
	“NA DEVICE”	• Restart the Android device.

MORE INFORMATION

General

•This unit can only play the following CDs:

•Detailed information and notes about the playable audio files are stated in an online manual on the following web site: www.kenwood.com/cs/ce/audiofile/

Playable files

•Playable audio file: MP3 (.mp3), WMA (.wma)

•Playable disc media: CD-R/CD-RW/CD-ROM

•Playable disc file format: ISO 9660 Level 1/2, Joliet, Long file name.

•Playable USB device file system: FAT12, FAT16, FAT32 Even when audio files comply with the standards listed above, playback may be impossible depending on the types or conditions of media or device.

Unplayable discs

•Discs that are not round.

•Discs with coloring on the recording surface or discs that are dirty.

•Recordable/ReWritable discs that have not been finalized.

•8 cm CD. Attempting to insert using an adapter may cause malfunction.

About USB devices

•This unit can play MP3/WMA/WAV files stored on a USB mass storage class device.

•You cannot connect a USB device via a USB hub.

•Connecting a cable whose total length is longer than 5 m may result in abnormal playback.

•This unit cannot recognize a USB device whose rating is other than 5 V and exceeds 1 A.

About KENWOOD Music Editor Light and KENWOOD

Music Control

•This unit supports the PC application KENWOOD Music Editor Light and Android™ application KENWOOD Music Control.

•When you play audio files with song data added using the KENWOOD Music Editor Light or KENWOOD Music Control, you can search for audio files by Genres, Artists, Albums, Playlists, and Songs.

•KENWOOD Music Editor Light and KENWOOD Music Control are available on the following web site: www.kenwood.com/cs/ce/

About iPod/iPhone

Made for

-iPod touch (2nd, 3rd, 4th, and 5th generation)

-iPod classic

-iPod nano (3rd, 4th, 5th, 6th, and 7th generation)

-iPhone 3G, 3GS, 4, 4S, 5, 5S, 5C

•For the latest compatible list and software versions of iPhone/iPod, see: www.kenwood.com/cs/ce/ipod

•You cannot operate iPod if “KENWOOD” or “” is displayed on iPod.

About Android device

•This unit supports Android OS 4.1 and above.

•Some Android devices (with OS 4.1 and above) may not fully support Android Open Accessory (AOA) 2.0.

•If the Android device supports both mass storage class device and AOA 2.0, this unit always playback via AOA 2.0 as priority.

•For more information and the latest compatible list, see: www.kenwood.com/cs/ce/

12

SPECIFICATIONS

	FM	Frequency Range	87.5 MHz — 108.0 MHz (50 kHz space)
		Usable Sensitivity (S/N = 26 dB)	0.71 μV/75 Ω
		Quieting Sensitivity	2.0 μV/75 Ω
		(DIN S/N = 46 dB)
Tuner		Frequency Response (±3 dB)	30 Hz — 15 kHz
		Signal-to-Noise Ratio (MONO)	64 dB
		Stereo Separation (1 kHz)	40 dB
	MW Frequency Range		531 kHz — 1 611 kHz (9 kHz space)
		Usable Sensitivity (S/N = 20 dB)	28.2 μV
	LW	Frequency Range	153 kHz — 279 kHz (9 kHz space)
		Usable Sensitivity (S/N = 20 dB)	50 μV
	Laser Diode		GaAIAs
	Digital Filter (D/A)		8 times over sampling
	Spindle Speed		500 rpm — 200 rpm (CLV)
	Wow & Flutter		Below measurable limit
player
	Total Harmonic Distortion (1 kHz)		0.01 %
	Frequency Response (±1 dB)		20 Hz — 20 kHz
CD
	Signal-to-Noise Ratio (1 kHz)		105 dB
	Dynamic Range		90 dB
	Channel Separation		85 dB
	MP3 Decode		Compliant with MPEG-1/2 Audio Layer-3
	WMA Decode		Compliant with Windows Media Audio

		USB Standard	USB 1.1, USB 2.0
		File System	FAT12/ 16/ 32
	USB	Maximum Supply Current	DC 5 V			1 A
		MP3 Decode	Compliant with MPEG-1/2 Audio Layer-3
		WMA Decode	Compliant with Windows Media Audio
		WAV Decode	Linear-PCM
		Maximum Output Power	50 W × 4
		Full Bandwidth Power	22 W × 4 (at less than 1 % THD)
		Speaker Impedance	4 Ω — 8 Ω
	Audio	Tone Action	Bass				200 Hz ±8 dB
			Middle				2.5 kHz ±8 dB
			Treble				12.5 kHz ±8 dB
		Preout Level/Load (CD)	(Except for					)
			2 500 mV/10 kΩ
		Preout Impedance	≤ 600 Ω
	Auxiliary	Frequency Response (±3 dB)	20 Hz — 20 kHz
		Input Maximum Voltage	1 000 mV
		Input Impedance	30 kΩ
		Operating Voltage	14.4 V (10.5 V — 16 V allowable)
	General	Maximum Current Consumption	10 A
		Operational Temperature Range	0°C — +40°C
		Installation Size (W × H × D)	182 mm × 53 mm × 159 mm
		Weight	1.2 kg

Subject to change without notice.

ENGLISH 13

INSTALLATION / CONNECTION

Warning

•The unit can only be used with a 12 V DC power supply, negative ground.

•Disconnect the battery’s negative terminal before wiring and mounting.

•Do not connect Battery wire (yellow) and Ignition wire (red) to the car chassis or Ground wire (black) to prevent a short circuit.

•Insulate unconnected wires with vinyl tape to prevent a short circuit.

•Be sure to ground this unit to the car’s chassis again after installation.

Caution

•For safety’s sake, leave wiring and mounting to professionals. Consult the car audio dealer.

•Install this unit in the console of your vehicle. Do not touch the metal parts of this unit during and shortly after use of the unit. Metal parts such as the heat sink and enclosure become hot.

•Do not connect the [ wires of speakers to the car chassis or Ground wire (black), or connect them in parallel.

•Mount the unit at an angle of less than 30º.

•If your vehicle wiring harness does not have the ignition terminal, connect Ignition wire (red) to the terminal on the vehicle’s fuse box which provides 12 V DC power supply and is turned on and off by the ignition key.

•Keep all cables away from heat dissipate metal parts.

•After the unit is installed, check whether the brake lamps, blinkers, wipers, etc. on the car are working properly.

•If the fuse blows, first make sure the wires are not touching car’s chassis, then replace the old fuse with one that has the same rating.

Basic procedure

1Remove the key from the ignition switch, then disconnect the [ terminal of the car battery.

2Connect the wires properly.

See Wiring connection. ( 15)

3Install the unit to your car.

See Installing the unit (in-dash mounting).

4 Connect the [ terminal of the car battery.

5 Reset the unit. ( 3)

Installing the unit (in-dash mounting)

Do the required wiring. ( 15)

Hook on the top side

Orientate the trim plate as illustrated before fitting.

Dashboard of your car

Bend the appropriate tabs to hold the mounting sleeve firmly in place.

How to remove the unit 1 Detach the faceplate.

2Fit the catch pin on the extraction keys into the holes on both sides of the trim plate, then pull it out.

3Insert the extraction keys deeply into the slots on each side, then follow the arrows as shown on the right.

14

Wiring connection

When connecting to an external amplifier, connect its ground wire to the car’s chassis to avoid damaging the unit.

Antenna terminal

Connecting the ISO connectors on some VW/Audi or Opel (Vauxhall) automobiles

You may need to modify the wiring of the supplied wiring harness as illustrated below.

		Ignition wire
A7	(Red)	(Red)
Vehicle		Unit
A4	(Yellow)	Battery wire
		(Yellow)

	Default wiring
Pin		Color and function
A4	Yellow		: Battery
A5	Blue/White		: Power control
A7	Red		: Ignition (ACC)
A8	Black		: Earth (ground) connection
B1	Purple ]		: Rear speaker (right)
B2	Purple/black [
B3	Gray ]		: Front speaker (right)
B4	Gray/black [
B5	White ]		: Front speaker (left)
B6	White/black [
B7	Green ]		: Rear speaker (left)
B8	Green/black [

Yellow (Battery wire)

Red (Ignition wire)

Red (A7)

Yellow (A4)

ISO connectors

Rear/ Front/ Subwoofer output

* : Not available

Fuse (10 A)

If no connections are made, do not let the wire come out from the tab.

Light blue/yellow

(Steering remote control wire)

Blue/White

(Power control wire/ Antenna control wire)

Brown

(Mute control wire)

STEERING WHEEL

REMOTE INPUT

REMOTE CONT

ANT CONT

P. CONT

MUTE

To the steering wheel remote control adapter

To the power control terminal when using the optional power amplifier or to the antenna control terminal in the vehicle

To the terminal that is grounded when the

telephone rings or during conversation (9)

(To connect the Kenwood navigation system,

refer your navigations manual.)

Part list for
installation
(A) Faceplate
(B) Trim plate
(C) Mounting sleeve
(D) Wiring harness
(E) Extraction key
ENGLISH	15

INHALT

VOR DER INBETRIEBNAHME	2
GRUNDLAGEN	3
ERSTE SCHRITTE	4
RADIO	5
CD / USB / iPod / ANDROID	7
AUX	9
DISPLAY-EINSTELLUNGEN	9

AUDIOEINSTELLUNGEN 10

FEHLERSUCHE 11

WEITERE INFORMATIONEN 12

TECHNISCHE DATEN	13
EINBAU / ANSCHLUSS	14

Wie Sie diese Anleitung lesen

•Die Bedienung wird im Wesentlichen

anhand der Tasten auf der Frontblende des erläutert.

•[XX] zeigt die gewählten Punkte an.

•(XX) zeigt an, das Bezugsinformationen auf der angegebenen Seitennummer vorhanden sind.

VOR DER INBETRIEBNAHME

Warnung

Bedienen Sie keine Funktion, die Ihre Aufmerksamkeit vom Straßenverkehr ablenkt.

Vorsicht

Lautstärkeeinstellung:

•Stellen Sie die Lautstärke so ein, dass Sie immer noch Geräusche von außerhalb des Fahrzeugs hören können, um Unfälle zu vermeiden.

•Senken Sie die Lautstärke vor dem Abspielen digitaler Tonquellen, um Beschädigung der Lautsprecher durch plötzliche Tonspitzen zu vermeiden.

Allgemeines:

•Vermeiden Sie Verwendung des externen Geräts, wenn dieses das sichere Fahren behindern kann.

•Stellen Sie sicher, dass alle wichtigen Daten gesichert sind. Wir übernehmen keine Haftung für jeglichen Verlust aufgenommener Daten.

•Stellen Sie sicher, dass keine Metallgegenstände (wie etwa Münzen oder Werkzeuge) ins Innere des Geräts gelangen und Kurzschlüsse verursachen.

•Wenn ein Disc-Fehler durch Kondensationsbildung auf der Laserlinse auftritt, werfen Sie die Disc aus und warten Sie eine Zeit

lang, bis die Kondensation getrocknet ist.

Fernbedienung (RC-406):

•Lassen Sie die Fernbedienung nicht an heißen Orten wie beispielsweise auf dem Armaturenbrett liegen.

•Es besteht die Gefahr, dass die Lithiumbatterie explodiert, wenn sie verkehrt eingesetzt wird. Ersetzen sie sie ausschließlich durch eine des gleichen oder eines gleichwertigen Typs.

•Akkus oder Batterien dürfen keiner großen Hitze, wie beispielsweise Sonneneinstrahlung, Feuer oder Ähnlichem, ausgesetzt werden.

•Bewahren Sie Batterie bis zur Verwendung außerhalb der Reichweite von Kindern und in der Originalverpackung auf. Entsorgen Sie gebrauchte Batterien umgehend. Bei Verschlucken der Batterie sofort einen Arzt aufsuchen.

Wartung

Reinigung des Geräts: Wischen Sie die Frontblende mit einem trockenen Silikonlappen oder weichen Lappen sauber.

Reinigung des Steckverbinders: Die Frontblende abnehmen und den Anschluss sanft mit einem Wattetupfer oder Lappen reinigen, wobei darauf geachtet werden muss, die Anschlusskontakte nicht zu beschädigen.

Handhabung von Discs:
•	Berühren Sie nicht die Aufnahme-Oberfläche der Disc.
•	Kleben Sie keine Aufkleber oder ähnliches auf eine Disc. Verwenden Sie dem	Anschluss (an der Rückseite der
	entsprechend auch keine Discs, auf denen sich bereits ein Aufkleber befindet.	Frontblende)

•Verwenden Sie kein Zubehör für die Disc.

•Reinigen Sie CDs stets von der Mitte einer Disc nach außen hin.

•Reinigen Sie die Disc mit einem trockenen Silikonlappen oder weichen Lappen. Verwenden Sie keine Lösungsmittel.

•Ziehen Sie Discs beim Entfernen aus dem Gerät horizontal heraus.

•Entfernen Sie vor dem Einsetzen einer Disc die Grate vom Mittenloch und der Disc-Kante.

2