DIGITAL VIDEO CAMERA
GR-D93
GR-D73
GR-D33
Please visit our Homepage on the World Wide Web for Digital Video Camera:
http://www.jvc.co.jp/english/cyber/
For Accessories:
http://www.jvc.co.jp/english/accessory/
The camcorder illustrations appearing in this instruction manual are of the GR-D93.
The D.S.C. (Digital Still Camera) features are available on GR-D93 and GR-D73.
INSTRUCTIONS
Dear Customer,
Thank you for purchasing this digital video camera. Before use, please read the safety information and precautions contained in the pages 2 – 3 to ensure safe use of this product.
ENGLISH
GETTING STARTED 5
VIDEO RECORDING & PLAYBACK 11
DIGITAL STILL CAMERA (D.S.C.) RECORDING & PLAYBACK (GR-D93/D73
only) 18
ADVANCED FEATURES 25
REFERENCES 38
TERMS 54
For Customer Use:
Enter below the Model No. and Serial No. which is located on the bottom of the camcorder. Retain this information for future reference.
Model No.
Serial No.
To deactivate the demonstration, set “DEMO MODE” to “OFF”.
( pg. 25, 27)
LYT1196-001C EN
2 EN
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
NOTES:
●The rating plate (serial number plate) and safety caution are on the bottom and/or the back of the main unit.
●The rating information and safty caution of the AC Adapter are on its upper and lower sides.
CAUTIONS:
●This camcorder is designed to be used with NTSC-type color television signals. It cannot be used for playback with a television of a different standard. However, live recording and LCD monitor/viewfinder playback are possible anywhere.
●Use the JVC BN-V408U/V416U/V428U battery packs and, to recharge them or supply power to the camcorder from an AC outlet, use the provided multi-voltage AC Adapter. (An appropriate conversion adapter may be necessary to accommodate different designs of AC outlets in different countries.)
Caution on Replaceable lithium battery
The battery used in this device may present a fire or chemical burn hazard if mistreated.
Do not recharge, disassemble, heat above 100°C (212°F) or incinerate.
Replace battery with Panasonic (Matsushita Electric), Sanyo, Sony or Maxell CR2025.
Danger of explosion or Risk of fire if the battery is incorrectly replaced.
●Dispose of used battery promptly.
●Keep away from children.
●Do not disassemble and do not dispose of in fire.
This product has a fluorescent lamp that contains a small amount of mercury. Disposal of these materials may be regulated in your community due to environmental considerations.
For disposal or recycling information please contact your local authorities, or the Electronics Industries Alliance:
<http://www.eiae.org>
When the equipment is installed in a cabinet or on a shelf, make sure that it has sufficient space on all sides to allow for ventilation (10 cm (3-15/16") or more on both sides, on top and at the rear).
Do not block the ventilation holes.
(If the ventilation holes are blocked by a newspaper, or cloth etc. the heat may not be able to get out.)
No naked flame sources, such as lighted candles, should be placed on the apparatus.
When discarding batteries, environmental problems must be considered and the local rules or laws governing the disposal of these batteries must be followed strictly.
The apparatus shall not be exposed to dripping or splashing.
Do not use this equipment in a bathroom or places with water.
Also do not place any containers filled with water or liquids (such as cosmetics or medicines, flower vases, potted plants, cups etc.) on top of this unit.
(If water or liquid is allowed to enter this equipment, fire or electric shock may be caused.)
Do not point the lens or the viewfinder directly into the sun. This can cause eye injuries, as well as lead to the malfunctioning of internal circuitry. There is also a risk of fire or electric shock.
CAUTION!
The following notes concern possible physical damage to the camcorder and to the user.
When carrying, be sure to always securely attach and use the provided strap. Carrying or holding the camcorder by the viewfinder and/or the LCD monitor can result in dropping the unit, or in a malfunction.
Take care not to get your finger caught in the cassette holder cover. Do not let children operate the camcorder, as they are particularly susceptible to this type of injury.
Do not use a tripod on unsteady or unlevel surfaces. It could tip over, causing serious damage to the camcorder.
CAUTION!
Connecting cables (Audio/Video, S-Video, etc.) to the camcorder and leaving it on top of the TV is not recommended, as tripping on the cables will cause the camcorder to fall, resulting in damage.
EN 3
1.Read these instructions.
2.Keep these instructions.
3.Heed all warnings.
4.Follow all instructions.
5.Do not use this apparatus near water.
6.Clean only with dry cloth.
7.Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8.Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9.Only use attachments/accessories specified by the manufacturer.
10.Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over.
11.Unplug this apparatus during lightning storms or when unused for long periods of time.
12.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
This camcorder is designed exclusively for the digital video cassette, SD Memory Card and MultiMediaCard. Only cassettes marked “” and memory cards* marked
“ ” or “ ” can be used with this unit.
Before recording an important scene…
…make sure you only use cassettes with the Mini DV mark .
…make sure you only use memory cards* with the mark or .
…remember that this camcorder is not compatible with other digital video formats.
…remember that this camcorder is intended for private consumer use only. Any commercial use without proper permission is prohibited. (Even if you record an event such as a show, performance or exhibition for personal enjoyment, it is strongly recommended that you obtain permission beforehand.)
*Memory cards can be used with GR-D93 and GR-D73 only.
GETTING STARTED |
5 |
Provided Accessories .................................................... |
5 |
Power ............................................................................. |
6 |
Grip Adjustment ............................................................. |
7 |
Operation Mode ............................................................. |
8 |
Date/Time Settings ........................................................ |
8 |
Viewfinder Adjustment ................................................... |
9 |
Brightness Adjustment Of The Display .......................... |
9 |
Tripod Mounting ............................................................. |
9 |
Loading/Unloading A Cassette .................................... |
10 |
Loading/Unloading A Memory Card (GR-D93/73 only) ...... |
10 |
VIDEO RECORDING & PLAYBACK |
11 |
VIDEO RECORDING ........................................................ |
11 |
Basic Recording ........................................................... |
11 |
LCD Monitor And Viewfinder ........................................ |
12 |
Tape Remaining Time .................................................. |
12 |
Zooming ....................................................................... |
12 |
Journalistic Shooting .................................................... |
13 |
Self Recording ............................................................. |
13 |
Time Code ................................................................... |
13 |
Recording From The Middle Of A Tape ....................... |
13 |
VIDEO PLAYBACK ........................................................... |
14 |
Normal Playback .......................................................... |
14 |
Still Playback ................................................................ |
14 |
Shuttle Search ............................................................. |
14 |
Blank Search ................................................................ |
14 |
Playback Using The Remote Control (GR-D93/73 only) .. |
15 |
Connections To A TV Or VCR ..................................... |
17 |
DIGITAL STILL CAMERA (D.S.C.) RECORDING & |
|
PLAYBACK (GR-D93/D73 only) |
18 |
D.S.C. RECORDING (GR-D93/D73 only) .......................... |
18 |
Basic Shooting (D.S.C. Snapshot) ............................... |
18 |
Dubbing Still Images Recorded On A Tape To A Memory |
|
Card ......................................................................... |
19 |
D.S.C. PLAYBACK (GR-D93/D73 only) ............................ |
20 |
Normal Playback Of Images ........................................ |
20 |
Auto Playback Of Images ............................................ |
20 |
Index Playback Of Files ............................................... |
20 |
Viewing File Information ............................................... |
21 |
Removing On-Screen Display ...................................... |
21 |
ADDITIONAL FEATURES FOR D.S.C. (GR-D93/D73 only) ... |
22 |
Protecting Files ............................................................ |
22 |
Deleting Files ............................................................... |
22 |
Setting Print Information (DPOF Setting) ..................... |
23 |
Resetting The File Name ............................................. |
24 |
Initializing A Memory Card ........................................... |
24 |
ADVANCED FEATURES |
25 |
MENUS FOR DETAILED ADJUSTMENT .............................. |
25 |
Changing The Menu Settings ...................................... |
25 |
Recording Menus ........................................................ |
26 |
Playback Menus .......................................................... |
28 |
FEATURES FOR RECORDING ........................................... |
29 |
White LED Light .......................................................... |
29 |
Night Alive ................................................................... |
29 |
Wipe Or Fader Effects ................................................. |
30 |
Program AE With Special Effects ................................ |
30 |
Snapshot (For Video Recording) ................................. |
31 |
Auto Focus .................................................................. |
31 |
Manual Focus .............................................................. |
32 |
Exposure Control ......................................................... |
32 |
Iris Lock ....................................................................... |
32 |
Backlight Compensation .............................................. |
33 |
White Balance Adjustment .......................................... |
33 |
Manual White Balance Adjustment ............................. |
33 |
EDITING ........................................................................ |
34 |
Dubbing To Or From A VCR ....................................... |
34 |
Dubbing To A Video Unit Equipped With A DV Connector |
|
(Digital Dubbing) ...................................................... |
35 |
Connection To A Personal Computer .......................... |
36 |
Audio Dubbing (GR-D93/73 only) ................................ |
37 |
Insert Editing (GR-D93/73 only) .................................. |
37 |
REFERENCES |
38 |
ADDITIONAL INFORMATION ........................................... |
38 |
TROUBLESHOOTING ....................................................... |
40 |
CAUTIONS ..................................................................... |
45 |
USER MAINTENANCE ...................................................... |
48 |
SPECIFICATIONS ............................................................ |
49 |
INDEX ........................................................................... |
50 |
TERMS |
54 |
GETTING STARTED EN 5
Provided Accessories |
How To Attach The Lens Cap |
|
To protect the lens, attach the provided lens cap to the |
||
|
||
|
camcorder as shown in the illustration. |
|
|
NOTE: |
|
or |
To confirm the lens cap is on correctly make sure the cap is |
|
|
flush to the camcorder. |
Push.
9 |
6 |
0 |
|
||
2 |
4 |
3 |
w |
5 |
e |
T
W
aAC Adapter AP-V14U or AP-V15U
bBattery Pack BN-V408U-B
cAudio/Video Cable (ø3.5 mini-plug to RCA plug)
dCore Filter (for USB Cable (provided with GR-D93/73 only) and optional S-Video Cable. pg. 6 for attachment)
eShoulder Strap (See the right column for attachment)
fCD-ROM
gMemory Card 8 MB (GR-D93/73 only) (Already inserted in the camcorder)
hRemote Control Unit RM-V718U (GR-D93/73 only)
iLithium Battery CR2025* (GR-D93/73 only) (for remote control unit)
jUSB Cable (GR-D93/73 only)
kLens Cap (See the right column for attachment)
*A lithium battery is pre-installed in the Remote Control Unit at time of shipment (with insulation sheet). To use the Remote Control Unit, remove the insulation sheet.
NOTES:
●In order to maintain optimum performance of the camcorder, provided cables may be equipped with one or more core filter. If a cable has only one core filter, the end that is closest to the filter should be connected to the camcorder.
●Make sure to use the provided cables for connections. Do not use any other cables.
Place here during shooting.
Follow the illustration.
1
2 Fold it back and thread it through the strap guide and the buckle.
●To adjust the length of the strap, loosen and then tighten the strap in the buckle.
3 Slide the strap guide fully towards the eyelet.
Strap guide
2
Buckle
3
1
Eyelet
6 EN GETTING STARTED
Attach the core filters to the cables. The core filter reduces interference.
1 Release the stoppers on both ends of the core filter.
Stopper
2 Run the cable through the core filter, leaving approx. 3 cm of cable between the cable plug and the core filter. Wind the cable once around the outside of the core filter as shown in the illustration.
● Wind the cable so that it is not slack.
3 cm
Wind once.
3 Close the core filter until it clicks shut.
NOTES:
●Take care not to damage the cable.
●When connecting a cable, attach the end with the core filter to the camcorder.
Power Switch
POWER/CHARGE lamp
Lock Button
Battery pack mount
Arrow
To DC connector
Mark |
Battery pack |
|
BATT.RELEASE |
AC Adapter
To AC outlet
This camcorder’s 2-way power supply system lets you choose the most appropriate source of power. Do not use provided power supply units with other equipment.
1 With the arrow on the battery pack pointing upward, push the battery pack slightly against the battery pack mount a.
2 Slide up the battery pack until it locks in place b.
3 Set the Power Switch to “OFF (CHARGE)”.
4
5 Plug the AC Adapter into an AC outlet. The POWER/ CHARGE lamp on the camcorder blinks to indicate charging has started.
6 When the POWER/CHARGE lamp goes out, charging is finished. Unplug the AC Adapter from the AC outlet. Disconnect the AC Adapter from the camcorder.
To detach the battery pack
Slide the battery pack down slightly while sliding BATT. RELEASE to detach it.
Battery pack |
Charging time |
|
|
BN-V408U* |
Approx. 1 hr. 30 min. |
|
|
BN-V416U |
Approx. 3 hr. |
|
|
BN-V428U |
Approx. 5 hr. |
|
|
* Provided |
|
NOTES:
●If the protective cap is attached to the battery pack, remove it first.
●During charging, the camcorder cannot be operated.
●Charging is not possible if the wrong type of battery is used.
GETTING STARTED EN 7
● When charging the battery pack for the first time or after a |
The Benefits Of |
|
long storage period, the POWER/CHARGE lamp may not |
Lithium-Ion Batteries |
|
light. In this case, remove the battery pack from the |
Lithium-ion battery packs |
|
camcorder, then try charging again. |
are small but have a large |
|
● If the battery operation time remains extremely short even |
||
power capacity. However, |
||
after having been fully charged, the battery is worn out and |
||
when one is exposed to |
||
needs to be replaced. Please purchase a new one. |
||
cold temperatures (below |
||
● For other notes, pg. 38. |
||
10°C/50°F), its usage time |
||
|
Using The Battery Pack |
|
becomes shorter and it |
Lithium-ion is vulnerable in |
|||
Perform steps 1 – 2 in “Charging The Battery Pack”. |
may cease to function. If |
|||||
this happens, place the |
colder temperatures. |
|||||
Maximum continuous recording time |
battery pack in your pocket |
|
||||
or other warm, protected |
|
|||||
● GR-D73/33 |
|
|
|
|||
|
|
place for a short time, then |
|
|||
|
|
|
|
|
||
|
Battery pack |
LCD monitor on |
Viewfinder on |
re-attach it to the camcorder. As long as the battery pack |
||
BN-V408U* |
1 hr. 10 min. |
1 hr. 40 min. |
itself is not cold, it should not affect performance. |
|||
(If you’re using a heating pad, make sure the battery pack |
||||||
|
|
|
|
|||
BN-V416U |
2 hr. 20 min. |
3 hr. 15 min. |
does not come in direct contact with it.) |
|||
BN-V428U |
4 hr. 10 min. |
5 hr. 50 min. |
For other notes, pg. 38. |
|||
● GR-D93 |
|
|
Grip Adjustment |
|
||
|
Battery pack |
LCD monitor on |
Viewfinder on |
|
||
|
1 Adjust the velcro strip. |
|
||||
BN-V408U* |
1 hr. 5 min. |
1 hr. 35 min. |
|
|||
BN-V416U |
2 hr. 15 min. |
3 hr. 5 min. |
2 Pass your right hand through the loop and grasp the |
|||
grip. |
|
|||||
|
|
|
|
|
||
BN-V428U |
4 hr. |
5 hr. 30 min. |
3 Adjust your thumb and fingers through the grip to |
|||
|
|
|
|
|||
* Provided |
|
|
easily operate the Recording Start/Stop Button, Power |
|||
NOTES: |
|
|
Switch and Power Zoom Lever. Be sure to fasten the |
|||
|
|
velcro strip to your preference. |
||||
● Recording time is reduced significantly under the following |
||||||
|
|
|||||
conditions: |
|
|
|
|
||
• |
Zoom or Record-Standby mode is engaged repeatedly. |
|
|
|||
• |
The LCD monitor is used repeatedly. |
|
|
|
||
• |
The playback mode is engaged repeatedly. |
|
|
|||
• |
The White LED Light is used. |
|
|
|
● Before extended use, it is recommended that you prepare enough battery packs to cover 3 times the planned shooting time.
ATTENTION:
Before detaching the power source, make sure that the camcorder’s power is turned off. Failure to do so can result in a camcorder malfunction.
GETTING STARTED
Connect the AC Adapter to the camcorder as shown in the illustration on page 6.
NOTES:
●The provided AC Adapter features automatic voltage selection in the AC range from 110 V to 240 V.
●Do not allow the DC terminals of the AC Adapter to come in contact with metals, as this can result in a short circuit and cause malfunction.
●For other notes, pg. 38.
DANGER! Do not attempt to take the batteries apart, or expose them to flame or excessive heat, as it may cause a fire or explosion.
WARNING! Do not allow the battery or its terminals to come in contact with metals, as this can result in a short circuit and possibly start a fire.
8 EN GETTING STARTED
To turn on the camcorder, set the Power Switch to any operation mode except “OFF (CHARGE)” while pressing down the Lock Button located on the switch.
POWER/CHARGE lamp
Power Switch
Lock Button
MMENU/VOL.
VIDEO/MEMORY (GR-D93/73 only)
Choose the appropriate operation mode according to your preference using the Power Switch and VIDEO/ MEMORY Switch (GR-D93/73 only).
Power Switch Position
A (Full Auto Recording):
Allows you to record using NO special effects or manual adjustments. Suitable for standard recording. The “A” indicator appears on the display.
M (Manual Recording):
Allows you to set various recording functions using the Menus. ( pg. 25)
If you want more creative capabilities than Full Auto Recording, try this mode.
There is no indication on the display.
OFF:
Allows you to switch off the camcorder.
PLAY:
●Allows you to play back a recording on the tape.
●Allows you to display a still image stored in the memory card or to transfer a still image stored in the memory card to a PC. (GR-D93/73 only)
●Allows you to set various playback functions using the Menus. ( pg. 25)
VIDEO/MEMORY Switch Position (GR-D93/73 only)
VIDEO:
Allows you to record on a tape or play back a tape. If
“REC SELECT” is set to “ |
|
/ |
|
” ( pg. 28), still |
images are recorded both on the tape and the memory card.
MEMORY:
●Allows you to record in a memory card or access data stored in a memory card.
●When the Power Switch is set to “A” or “M”, the currently selected image size appears.
When the Power Switch is set to “A” or “M”, you can also turn on/off the camcorder by opening/closing the LCD monitor or pulling out/pushing in the viewfinder.
INFORMATION:
The following explanations in this manual supposes the use of LCD monitor in your operation. If you want to use the viewfinder, close the LCD monitor and pull out the viewfinder fully.
The date/time is recorded onto the tape at all times, but its display can be turned on or off during playback.
( pg. 25, 28)
1 Set the Power Switch to “M” while pressing down the Lock Button located on the switch.
2 Open the LCD monitor fully. ( pg. 12)
3 Press the MMENU/VOL. Wheel in. The Menu Screen appears.
4 Rotate the MMENU/VOL. |
|
|
|
|
|
|
CAMERA DISPLAY |
|
|||
Wheel to select “n”, and press it. |
BR I GHT |
|
|||
ON SCREEN – LCD / T V |
|||||
The CAMERA DISPLAY Menu |
DATE / T I ME – AUTO |
|
|||
T I ME |
CODE – OFF |
|
|||
appears. |
CLOCK |
|
DEC |
2 5'0 4 |
|
ADJ . |
|
5 : 3 0 PM |
|||
5 Rotate the MMENU/VOL. |
|
|
|
|
|
Wheel to select “CLOCK ADJ.”, |
RETURN |
|
|||
and press it. The parameter for |
|
|
|
|
|
“Month” is highlighted. |
|
|
|
|
|
6 Rotate the MMENU/VOL. |
|
|
|
||
|
CAMERA DISPLAY |
|
|||
Wheel to input the month, and |
|
|
|
|
|
|
|
|
|
||
press it. Repeat to input the day, |
CLOCK |
|
DEC |
2 5'0 4 |
|
year, hour and minute. |
ADJ . |
|
5 : 3 0 PM |
||
|
|
|
|
||
7 Rotate the MMENU/VOL. |
|
|
|
|
|
Wheel to select “BRETURN”, and |
RETURN |
|
|||
press it twice. The Menu Screen closes. |
|
|
|
|
NOTE:
Even if you select “CLOCK ADJ.”, if the parameter is not highlighted, the camcorder’s internal clock continues to operate. Once you move the highlight bar to the first date/ time parameter (month), the clock stops. When you finish setting the minute and press the MMENU/VOL. Wheel in, the date and time begin operation from the date and time you have just set.
GETTING STARTED EN 9
1 Set the Power Switch to “A” or “M” while pressing down the Lock Button located on the switch.
2 Make sure the LCD monitor is closed and locked. Pull out the viewfinder fully and adjust it manually for best viewability.
3 Turn the Diopter Adjustment Control until the indications in the viewfinder are clearly focused.
PAUSE
Diopter Adjustment Control
CAUTION:
When retracting the viewfinder, take care not to pinch your fingers.
1 Set the Power Switch to “M” or “PLAY” while pressing down the Lock Button located on the switch.
2 Open the LCD monitor fully. ( pg. 12)
3 Press the MMENU/VOL.
Wheel in. The Menu Screen appears.
4 Rotate the MMENU/VOL. Wheel to select “n”, and press it. The CAMERA DISPLAY Menu appears.
MMENU/VOL.
BRIGHT
5 Rotate the MMENU/VOL.
Wheel to select “BRIGHT”, and press it. The Menu Screen closes and the brightness control indicator appears.
6 Rotate the MMENU/VOL. Wheel until the appropriate brightness is reached.
7 Press the MMENU/VOL. Wheel in.
●It is also possible to adjust the brightness of the viewfinder by pulling out the viewfinder, setting “PRIORITY” in the SYSTEM Menu to “FINDER” ( pg. 25, 27) and adjusting as described above.
To attach the camcorder to a tripod, align the direction stud and screw to the mounting socket and stud hole on the camcorder. Then tighten the screw clockwise.
● Some tripods are not equipped with studs.
CAUTION:
When attaching the camcorder to a tripod, extend its legs to
stabilize the camcorder. It is not advised to use small sized tripods. This may cause damage to the unit by falling over.
GETTING STARTED
10 EN GETTING STARTED
The camcorder needs to be powered up to load or eject a cassette.
OPEN/EJECT
Cassette holder cover
PUSH HERE
|
Make sure the |
Cassette holder |
window side is |
facing out. |
Erase protection tab
1 Slide and hold OPEN/EJECT in the direction of the arrow, then pull the cassette holder cover open until it locks. The cassette holder opens automatically.
● Do not touch internal components.
2 Insert or remove a tape and press “PUSH HERE” to close the cassette holder.
●Be sure to press only the section labeled “PUSH HERE” to close the cassette holder; touching other parts may cause your finger to get caught in the cassette holder, resulting in injury or product damage.
●Once the cassette holder is closed, it recedes automatically. Wait until it recedes completely before closing the cassette holder cover.
●When the battery pack’s charge is low, you may not be able to close the cassette holder cover. Do not apply force. Replace the battery pack with a fully charged one or use AC power before continuing.
3 Close the cassette holder cover firmly until it locks into place.
Approximate recording time
Tape |
|
Recording mode |
|
|
|
|
|
|
SP |
|
LP |
|
|
|
|
30 min. |
30 min. |
|
45 min. |
|
|
|
|
60 min. |
60 min. |
|
90 min. |
|
|
|
|
80 min. |
80 min. |
|
120 min. |
|
|
|
|
To switch the recording mode, refer to pages 25 and 26.
To protect valuable recordings
Slide the erase protection tab on the back of the tape in the direction of “SAVE”. This prevents the tape from being recorded over. To record on this tape, slide the tab back to “REC” before loading it.
For other notes, pg. 38.
The provided memory card is already inserted in the camcorder at the time of purchase.
Card Cover (MEMORY CARD)
Memory card
Label
Clipped edge
Write/erase protection tab
1 Make sure the camcorder’s power is off.
2 Open the LCD monitor ( pg. 12), then open the card cover (MEMORY CARD).
3 To load a memory card, firmly insert it with its clipped edge first.
To unload a memory card, push it once. After the memory card comes out of the camcorder, pull it out.
● Do not touch the terminal on the reverse side of the label.
4 Close the card cover.
To protect valuable files (available only for SD Memory Card)
Slide the write/erase protection tab on the side of the memory card in the direction of “LOCK”. This prevents the memory card from being recorded over. To record on this memory card, slide the tab back to the position opposite to “LOCK” before loading it.
NOTES:
● Be sure to use only SD Memory Cards marked “ ” or MultiMediaCards marked “”.
●Some brands of memory cards are not compatible with this camcorder. Before purchasing a memory card, consult its manufacturer or dealer.
●Before using a new memory card, it is necessary to FORMAT the card. ( pg. 24)
ATTENTION:
Do not insert or remove the memory card while the camcorder is turned on, as this may cause the memory card to be corrupted or cause the camcorder to become unable to recognize whether or not the card is installed.
NOTE:
Before continuing, perform the procedures listed below:
●Power ( pg. 6)
●Loading A Cassette ( pg. 10)
Push.
POWER/CHARGE lamp |
Power Zoom Lever |
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Power Switch
Lock Button
Recording Start/Stop Button
1 Remove the lens cap.
2 Open the LCD monitor fully. ( pg. 12)
3 Set the VIDEO/MEMORY Switch to “VIDEO”. (GR-D93/73 only)
4 Set the Power Switch to “A” or “M” while pressing down the Lock Button located on the switch.
●The POWER/CHARGE lamp lights and the camcorder enters the Record-Standby mode. “PAUSE” is displayed.
●To record in LP (Long Play) mode, pg. 25, 26.
5 To start recording, press the Recording Start/Stop Button. The “T REC” appears on the display while recording is in progress.
6 To stop recording, press the Recording Start/Stop Button again. The camcorder re-enters the RecordStandby mode.
NOTES:
●The image will not appear simultaneously on the LCD monitor and the viewfinder.
●If the Record-Standby mode continues for 5 minutes, the camcorder’s power shuts off automatically. To turn the camcorder on again, push back and pull out the viewfinder again or close and re-open the LCD monitor.
●LCD monitor/viewfinder indications:
• |
When power is supplied from a battery: the “ |
” |
|
battery indicator is displayed. ( pg. 43) |
|
• |
When power is supplied from an AC outlet: the “ |
” |
|
battery indicator does not appear. |
|
●When a blank portion is left between recorded scenes on the tape, the time code is interrupted and errors may occur when editing the tape. To avoid this, refer to “Recording From The Middle Of A Tape” ( pg. 13).
●To turn the beep sounds off, pg. 25, 27.
●For other notes, pg. 38.
12 EN VIDEO RECORDING |
|
LCD Monitor And Viewfinder |
Zooming |
While using the LCD monitor:
Make sure the viewfinder is pushed back in. Press the Monitor Opening Button and open the LCD monitor fully. It can rotate 270° (90° downward, 180° upward).
While using the viewfinder:
Make sure the LCD monitor is closed and locked. Pull out the viewfinder fully.
●Be sure to pull out the viewfinder until you hear a click, otherwise it may be pushed back in during use.
Produces the zoom in/out effect, or an instantaneous change in image magnification.
Zoom In
Slide the Power Zoom Lever towards “T”.
Zoom Out
Slide the Power Zoom Lever towards “W”.
●The further you slide the Power Zoom Lever, the quicker the zoom action.
Zoom in (T: Telephoto)
1 xW |
T |
|
|
|
|
1 0 xW |
T |
|
|
|
|
20xW |
T |
|
|
|
|
40xW |
T |
Monitor Opening Button
NOTES:
●The image will not appear simultaneously on the LCD monitor and the viewfinder. When the viewfinder is pulled out while the LCD monitor is opened, you can select which one to use. Set “PRIORITY” to the desired mode in SYSTEM Menu. ( pg. 25, 27)
●Colored bright spots may appear all over the LCD monitor or the viewfinder. However, this is not a malfunction.
( pg. 42)
Approximate tape remaining time appears on the display. “– h – – m” means the camcorder is calculating the remaining time. When the remaining time reaches
2 minutes, the indication starts blinking.
0h 25 m
– h– – m 1 h 0 m 0 h 5 9 m 0 h 3 m
(Now calculating)
0 h 0 m 0 h 1 m 0 h 2 m
Zoom out (W: Wide angle)
1 0 x WT
Digital zoom zone
16X (10X for GR-D93) (optical) zoom zone
Approximate zoom ratio
NOTES:
●Focusing may become unstable during Zooming. In this case, set the zoom while in Record-Standby, lock the focus by using the manual focus ( pg. 32), then zoom in or out in Record mode.
●Zooming is possible to a maximum of 700X, or it can be switched to 16X (10X for GR-D93) magnification using the optical zoom. ( pg. 26)
●Zoom magnification of over 16X (10X for GR-D93) is done through Digital image processing, and is therefore called Digital Zoom.
●During Digital zoom, the quality of image may suffer.
●Digital zoom cannot be used when the VIDEO/MEMORY Switch is set to “MEMORY”. (GR-D93/73 only)
●Macro shooting (as close as approx. 5 cm (2") to the subject) is possible when the Power Zoom Lever is set all the way to “W”. Also see “TELE MACRO” in MANUAL Menu on page 26.
(Blinking) (Blinking) (Blinking)
|
VIDEO RECORDING |
EN 13 |
|
|
|
Journalistic Shooting |
Recording From The Middle Of A Tape |
In some situations, different shooting angles may provide more dramatic results. Hold the camcorder in the desired position and tilt the LCD monitor in the most convenient direction. It can rotate 270° (90° downward, 180° upward).
Open the LCD monitor and tilt
it upward to 180° so that it faces forward, then point the lens toward yourself and start
recording. Self Recording
During recording, a time code is recorded on the tape. This code is to confirm the location of the recorded scene on the tape during playback.
Display
Minutes
Seconds
Frames*
(30 frames = 1 second)
12 : 34 : 24
* Frames are not displayed during recording.
If recording starts from a blank portion, the time code begins counting from “00:00:00” (minute:second:frame). If recording starts from the end of a previously recorded scene, the time code continues from the last time code number.
If during recording a blank portion is left partway through the tape, the time code is interrupted. When recording is resumed, the time code starts counting up again from “00:00:00”. This means the camcorder may record the same time codes as those existing in a previously recorded scene. To prevent this, perform “Recording From The Middle Of A Tape” (See the right column) in the following cases;
●When shooting again after playing back a recorded tape.
●When power shuts off during shooting.
●When a tape is removed and re-inserted during shooting.
●When shooting using a partially recorded tape.
●When shooting on a blank portion located partway through the tape.
●When shooting again after shooting a scene then opening/ closing the cassette holder cover.
1)Play back a tape or use Blank Search ( pg. 14) to find the spot at which you want to start recording, then engage the Still Playback mode. ( pg. 14)
2)Set the Power Switch to “A” or “M” while pressing down the Lock Button located on the switch, then start recording.
NOTES:
●The time code cannot be reset.
●During fast-forwarding and rewinding, the time code indication does not move smoothly.
●The time code is displayed only when “TIME CODE” is set to “ON”. ( pg. 27)
When a blank portion is recorded on a tape
Time code |
Time code |
Time code |
00:00:00 |
05:43:21 |
00:00:00 |
Tape |
Already |
Blank |
|
Newly recorded |
PLAYBACK& |
||
recorded scene |
|
scene |
|
||||
|
|
|
|
|
|
|
|
Shooting start |
Shooting stop |
|
Shooting start |
RECORDING |
|||
point |
|
point |
|
|
point |
||
|
|
|
|
||||
Proper recording |
|
|
|
|
VIDEO |
||
Time code |
Time code |
Time code |
|||||
00:00:00 |
05:43:21 |
05:44:00 |
|
||||
|
|
|
|
|
|
||
Tape |
Already |
New |
|
Latest scene |
|
||
recorded scene |
scene |
|
|
||||
|
|
|
|
||||
|
|
|
|
|
|
|
|
Shooting start |
Shooting start |
|
Shooting start |
|
|||
point |
|
point |
|
|
point |
|
MMENU/VOL. |
Shuttle Search |
|
BLANK SEARCH |
|
Allows high-speed search in either direction during video |
|
playback. |
|
1) During playback, press 5 for forward search, or |
|
3 for reverse search. |
|
2) To resume normal playback, press 4/9. |
|
● During playback, press and hold 5 or 3. The search |
|
continues as long as you hold the button. Once you release |
|
the button, normal playback resumes. |
|
● A slight mosaic effect appears on the display during Shuttle |
|
Search. This is not a malfunction. |
Power Switch
Lock Button
VIDEO/MEMORY (GR-D93/73 only)
8
4/9
3
Speaker |
5 |
|
1 Load a cassette. ( pg. 10)
2 Set the VIDEO/MEMORY Switch to “VIDEO”. (GR-D93/73 only)
3 Set the Power Switch to “PLAY” while pressing down the Lock Button located on the switch.
4 To start playback, press 4/9.
5 To stop playback, press 8.
●During Stop mode, press 3 to rewind, or 5 to fastforward the tape.
To control the speaker volume
Rotate the MMENU/VOL. Wheel towards “+” to turn up the volume, or towards “–” to turn down the volume.
NOTES:
ATTENTION:
During Shuttle Search, parts of the picture may not be clearly visible, particularly on the left side of the screen.
Blank Search
Helps you find where you should start recording in the middle of a tape to avoid time code interruption.
( pg. 13)
1 Load a cassette. ( pg. 10)
2 Set the VIDEO/MEMORY Switch to “VIDEO”. (GR-D93/73 only)
3 Set the Power Switch to “PLAY” while pressing down the Lock Button located on the switch.
4 During Stop mode, press BLANK SEARCH.
●The “BLANK SEARCH” indication appears and the camcorder automatically starts reverse or forward search, then stops at the spot which is about 3 seconds of tape before the beginning of the detected blank portion.
●To cancel Blank Search midway, press 8.
NOTES:
●Before starting Blank Search, if the current position is at a blank portion, the camcorder searches in the reverse direction. If the current position is at a recorded portion, the camcorder searches in the forward direction.
●Blank Search does not work if “USE CLEANING CASSETTE” has appeared with the tape.
●If the beginning or end of the tape is reached during Blank Search, the camcorder stops automatically.
●A blank portion which is shorter than 5 seconds of tape may not be detected.
●The detected blank portion may be located between recorded scenes. Before you start recording, make sure there is no recorded scene after the blank portion.
●The playback picture can be viewed in the LCD monitor, viewfinder or on a connected TV. ( pg. 17)
●For other notes, pg. 39.
Pauses during video playback.
1)Press 4/9 during playback.
2)To resume normal playback, press 4/9 again.
●If still playback continues for more than about 3 minutes, the camcorder’s Stop mode is automatically engaged.
●When 4/9 is pressed, the image may not pause immediately while the camcorder stabilizes the still image.
VIDEO PLAYBACK EN 15
The Full-Function Remote Control Unit can operate this camcorder from a distance as well as the basic operations (Playback, Stop, Pause, Fast-Forward and Rewind) of your VCR. It also makes additional playback functions possible. ( pg. 16)
The remote control uses one lithium battery (CR2025).
1 Pull out the battery holder by inserting a pointed instrument into the slot.
2 Insert the battery in the holder, and be sure to have the “+” mark visible.
3 Slide the holder back in until you hear a click.
2 3 1
1
Slot
When using the remote control, be sure to point it at the remote sensor. The transmitted beam’s approximate effective distance for indoor use is 5 m (16 ft).
NOTE:
The transmitted beam may not be effective or may cause incorrect operation when the remote sensor
is directly exposed to sunlight or powerful lighting.
T
W
A Infrared beam transmitting window |
|
|
|
|
The following buttons are available only when the |
|
|
||
camcorder’s Power Switch is set to “PLAY”. |
|
|
||
.....................................B AUDIO Button |
( pg. 25, |
28) |
PLAYBACK& |
|
Left Button ................................................ |
( pg. |
16) |
||
C PAUSE Button* .......................................... |
( pg. |
16) |
|
|
Up Button .................................................. |
( pg. |
16) |
|
|
D SLOW Rewind Button ................................ |
( pg. |
16) |
|
|
E REW Button* ....................................... |
( pg. 14, |
20) |
|
|
F INSERT Button .......................................... |
( pg. |
37) |
RECORDING |
|
G STOP Button* |
( pg. 14, |
20) |
||
|
||||
Down Button ............................................. |
( pg. |
16) |
|
|
H SHIFT Button ............................................ |
( pg. |
16) |
|
|
I EFFECT ON/OFF Button .......................... |
( pg. |
16) |
|
|
J EFFECT Button ........................................ |
( pg. |
16) |
VIDEO |
|
L FF Button* ........................................... |
( pg. 14, |
20) |
||
K SLOW Forward Button............................... |
( pg. |
16) |
|
|
Right Button .............................................. |
( pg. |
16) |
|
|
M PLAY Button* ....................................... |
( pg. 14, |
20) |
|
|
N A. DUB Button ........................................... |
( pg. |
37) |
|
|
O DISPLAY Button ................................. |
( pg. 17, |
34) |
|
The following buttons are available when the camcorder’s Power Switch is set to “A” or “M”.
aS.SHOT (Snapshot) Button*
bSTART/STOP Button*
c Zoom (T/W) Buttons** ........................ |
( pg. 12, 16) |
*Functions the same as each corresponding button on the camcorder. ( pg. 51)
**Functions when the camcorder’s Power Switch is set to “PLAY” as well.
16 EN VIDEO PLAYBACK
|
|
Up Button |
SLOW Rewind |
|
or PAUSE |
|
SLOW Forward |
|
Button |
|
Button |
Left Button |
|
Right Button |
Down Button |
|
PLAY |
|
|
|
or STOP |
T |
Zoom Buttons |
|
||
|
W |
|
|
|
|
SHIFT |
|
|
Allows slow-speed search in either direction during video playback.
During normal video playback, press SLOW (YI or IU) more than approx. 2 seconds.
●After approx. 5 minutes (1 minute for GR-D93) (approx. 20 seconds with an 80-minute cassette) in Slow Rewind or approx. 5 minutes in Slow Forward, normal playback resumes.
●To pause Slow-Motion playback, press PAUSE (9).
●To stop Slow-Motion playback, press PLAY (U).
NOTES:
●You can also engage Slow-Motion Playback from Still Playback by pressing SLOW (YI or IU) more than approx. 2 seconds.
●During Slow-Motion Playback, due to digital image processing, the picture may take on a mosaic effect.
●After SLOW (YI or IU) is pressed and held, the still image may be displayed for a few seconds, followed by a blue screen for a few seconds. This is not a malfunction.
●There may be a small margin between the slow-motion playback start point you chose and the actual start point for Slow-Motion Playback.
●During Slow-Motion Playback, there will be disturbances in video and the picture may seem unstable, especially with steady images. This is not a malfunction.
Allows frame-by-frame search during video playback.
During normal or still playback, press SLOW (IU) repeatedly for forward or SLOW (YI) repeatedly for reverse. Each time SLOW (YI or IU) is pressed, the frame is played back.
Magnifies the recorded image up to 44X (70X for GR-D93) at any time during video playback and D.S.C. playback.
1) Press PLAY (U) to start video playback. Or perform normal playback of images.
2) At the point you want to zoom in, press the Zoom Button (T).
● To zoom out, press the Zoom Button (W).
3) You can move the image on the screen
around to find a particular portion of the picture. While holding down SHIFT, press L (Left), F (Right), U (Up) and E (Down).
● To end zoom, press and hold W until magnification returns to normal. Or, press STOP (8) and then press PLAY (U) during video playback.
NOTES:
●Zoom can also be used during slow-motion and still playback.
●Due to digital image processing, the quality of the image may suffer.
Allows you to add creative effects to the video playback image.
The effects that can be used during playback are CLASSIC FILM, MONOTONE, SEPIA and STROBE. The effects work the same in playback as they did in recording. ( pg. 30)
CLASSIC FILM: Gives recorded scenes a strobe effect.
MONOTONE: Like classic black and white films, your footage is shot in B/W. Used together with the Cinema mode, it enhances the “classic film” effect.
SEPIA: Recorded scenes have a brownish tint like old photos. Combine this with the Cinema mode for a classic look.
STROBE: Your recording looks like a series of
consecutive snapshots. |
|
1) To start playback, |
EFFECT |
press PLAY (U). |
|
2) Press EFFECT. |
EFFECT ON/OFF |
The PLAYBACK |
|
EFFECT Select Menu |
|
appears. |
|
3) Press EFFECT |
T |
repeatedly to move |
W |
|
|
the highlight bar to the |
|
desired effect. |
|
●The selected function is activated and after 2 seconds the menu disappears.
●To deactivate the selected effect, press EFFECT ON/OFF. To reactivate the selected effect press EFFECT ON/OFF again.
●To change the selected effect, repeat from step 2 above.
VIDEO PLAYBACK EN 17
These are some basic types of connections. When making the connections, refer also to your VCR and TV instruction manuals.
To AV |
To S |
Audio/Video |
S-Video cable |
cable |
(optional) |
(provided) |
|
1 Make sure all units are turned off.
2 Connect the camcorder to a TV or VCR as shown in the illustration.
If using a VCR, go to step 3.
If not, go to step 4.
3 Connect the VCR output to the TV input, referring to your VCR’s instruction manual.
4
5 Set the VCR to its AUX input mode, and set the TV to its VIDEO mode.
To choose whether or not the following displays appear on the connected TV
●Date/Time
Set “DATE/TIME” to “AUTO”, “ON” or “OFF”. ( pg. 25, 28) Or, press DISPLAY on the remote control (provided with GR-D93/73 only) to turn on/off the date indication.
●Time Code
Set “TIME CODE” to “ON” or “OFF”. ( pg. 25, 28)
●Indications other than date/time and time code Set “ON SCREEN” to “OFF”, “LCD” or “LCD/TV”. ( pg. 25, 28)
NOTES:
1 2 3 4
VCR
TV |
A White to AUDIO L IN*
B Red to AUDIO R IN*
C Yellow to VIDEO IN**
D To S-VIDEO IN***
*Not required for watching still images only.
**Connect when your TV/VCR has only A/V input connectors.
***Connect when your TV/VCR has S-VIDEO IN and A/V input connectors. In this case, it is not necessary to connect the yellow video cable.
●It is recommended to use the AC Adapter as the power supply instead of the battery pack. ( pg. 7)
●To monitor the picture and sound from the camcorder without inserting a tape or memory card*, set the camcorder’s Power Switch to “A” or “M”, then set your TV to the appropriate input mode.
*GR-D93/73 only
●Make sure you adjust the TV sound volume to its minimum level to avoid a sudden burst of sound when the camcorder is turned on.
●If you have a TV or speakers that are not specially shielded, do not place the speakers adjacent to the TV as interference will occur in the camcorder playback picture.
●When a cable is connected to the AV connector, the sound is not heard from the speaker.
VIDEO RECORDING & PLAYBACK