GR-D320EK
Table of contents
Loading...
ENGLISH
GR-D320E/EK
LYT1526-001A
EN
Dear Customer,
Thank you for purchasing this digital
video camera. Before use, please
read the safety information and
precautions contained in the pages
2 – 5 and 11 to ensure safe use of
this product.
Please visit our Homepage on the World Wide Web for
Digital Video Camera:
For Accessories:
http://www.jvc.co.jp/english/cyber/
http://www.jvc.co.jp/english/accessory/
INSTRUCTIONS
DIGITAL VIDEO CAMERA
GETTING STARTED
8
VIDEO RECORDING &
PLAYBACK
18
ADVANCED FEATURES
23
REFERENCES
36
TERMS
To deactivate the demonstration,
set “DEMO MODE” to “OFF”.
(墌 pg. 23, 25)
43
2 EN
● Before recording important video, be sure to
make a trial recording.
Play back your trial recording to make sure the
video and audio have been recorded properly.
● We recommend cleaning your video heads
before use.
If you haven’t used your
camcorder for a while, the
heads may be dirty. We
recommend periodically
cleaning the video heads
with a cleaning cassette
(optional).
● Be sure to store your cassette tapes and
camcorder in the proper environment.
Video heads can become dirty more easily if your
cassette tapes and camcorder are stored in a
dusty area. Cassette tapes should be removed
from the camcorder and stored in cassette cases.
Store the camcorder in a bag or other container.
● Use SP (Standard) mode for important video
recordings.
LP (Long Play) mode lets you record 50% more
video than SP (Standard) mode, but you may
experience mosaic-like noise during playback
depending on the tape characteristics and the
usage environment.
So, for important recordings, we recommend
using SP mode.
● For safety and reliability.
It is recommended only genuine JVC batteries
and accessories are used in this camcorder.
● This product includes patented and other
proprietary technology and will operate only
with JVC Data Battery. Use the JVC
BNVF707U/VF714U/VF733U battery packs.
Using generic non-JVC batteries can cause
damage to the internal charging circuitry.
● Make sure you only use cassettes with the
Mini DV mark .
● Remember that this camcorder is intended for
private consumer use only.
Any commercial use without proper permission is
prohibited. (Even if you record an event such as a
show, performance or exhibition for personal
enjoyment, it is strongly recommended that you
obtain permission beforehand).
● DO NOT leave the unit
- in place of over 50°C (122°F)
- in place where humidity is extremely low (below
35%) or extremely high (80%).
- in direct sunlight.
- in a closed car in summer.
- near a heater.
● The LCD monitor is made with high-precision
technology. However, black spots or bright spots
of light (red, green or blue) may appear constantly
on the LCD monitor. These spots are not
recorded on the tape. This is not due to any
defect of the unit. (Effective dots: more than
99.99%)
● Do not leave the battery pack attached when the
camcorder is not in use and check the unit
regularly whether it is working or not.
READ THIS FIRST !
EN 3
SAFETY PRECAUTIONS
IMPORTANT (for owners in the U.K.)
Connection to the mains supply in the United
Kingdom.
DO NOT cut off the mains plug from this
equipment.
If the plug fitted is not suitable for the power
points in your home or the cable is too short to
reach a power point, then obtain an appropriate
safety approved extension lead or consult your
dealer.
BE SURE to replace the fuse only with an
identical approved type, as originally fitted,
and to replace the fuse cover.
If nonetheless the mains plug is cut off be sure to
remove the fuse and dispose of the plug
immediately, to avoid possible shock hazard by
inadvertent connection to the mains supply.
If this product is not supplied fitted with a mains
plug then follow the instructions given below:
DO NOT make any connection to the Larger
Terminal coded E or Green.
The wires in the mains lead are coloured in
accordance with the following code:
If these colours do not correspond with the
terminal identifications of your plug, connect as
follows:
Blue wire to terminal coded N (Neutral) or
coloured black.
Brown wire to terminal coded L (Live) or coloured
Red.
If in doubt — consult a competent electrician.
WARNING: TO PREVENT FIRE OR SHOCK
HAZARD, DO NOT EXPOSE THIS UNIT TO
RAIN OR MOISTURE.
CAUTIONS:
● To prevent shock, do not open the cabinet. No
user serviceable parts inside. Refer servicing to
qualified personnel.
● When you are not using the AC Adapter for a
long period of time, it is recommended that you
disconnect the power cord from AC outlet.
Blue to N (Neutral)
or Black
Brown to L (Live)
or Red
CAUTION:
To avoid electric
shock or damage to
the unit, first firmly
insert the small end
of the power cord into
the AC Adapter until it
is no longer wobbly,
and then plug the
larger end of the
power cord into an
AC outlet.
CAUTIONS:
● This camcorder is designed to be used with
PAL-type colour television signals. It cannot be
used for playback with a television of a different
standard. However, live recording and LCD
monitor/viewfinder playback are possible
anywhere.
● This product includes patented and other
proprietary technology and will operate only
with JVC Data Battery. Use the JVC
BN-VF707U/VF714U/VF733U battery packs
and, to recharge them or to supply power to the
camcorder from an AC outlet, use the provided
multi-voltage AC Adapter. (An appropriate
conversion adapter may be necessary to
accommodate different designs of AC outlets in
different countries.)
NOTES:
● The rating plate (serial number plate) and
safety caution are on the bottom and/or the
back of the main unit.
● The rating information and safety caution of the
AC Adapter are on its upper and lower sides.
4 EN
When the equipment is installed in a cabinet or on
a shelf, make sure that it has sufficient space on
all sides to allow for ventilation (10 cm or more on
both sides, on top and at the rear).
Do not block the ventilation holes.
(If the ventilation holes are blocked by a
newspaper, or cloth etc. the heat may not be able
to get out).
No naked flame sources, such as lighted candles,
should be placed on the apparatus.
When discarding batteries, environmental
problems must be considered and the local rules
or laws governing the disposal of these batteries
must be followed strictly.
The apparatus shall not be exposed to dripping or
splashing.
Do not use this equipment in a bathroom or
places with water.
Also do not place any containers filled with water
or liquids (such as cosmetics or medicines, flower
vases, potted plants, cups etc.) on top of this unit.
(If water or liquid is allowed to enter this
equipment, fire or electric shock may be caused).
Do not point the lens or the viewfinder directly into
the sun. This can cause eye injuries, as well as
lead to the malfunctioning of internal circuitry.
There is also a risk of fire or electric shock.
CAUTION!
The following notes concern possible physical
damage to the camcorder and to the user.
When carrying, be sure to always securely attach
and use the provided strap. Carrying or holding
the camcorder by the viewfinder and/or the LCD
monitor can result in dropping the unit, or in a
malfunction.
Take care not to get your finger caught in the
cassette holder cover. Do not let children operate
the camcorder, as they are particularly
susceptible to this type of injury.
Do not use a tripod on unsteady or unlevel
surfaces. It could tip over, causing serious
damage to the camcorder.
CAUTION!
Connecting cables (Audio/Video, S-Video, etc.) to
the camcorder and leaving it on top of the TV is
not recommended, as tripping on the cables will
cause the camcorder to fall, resulting in damage.
[European Union]
This symbol indicates that the electrical and electronic equipment should not be disposed as
general household waste at its end-of-life. Instead, the product should be handed over to the
applicable collection point for the recycling of electrical and electronic equipment for proper
treatment, recovery and recycling in accordance with your national legislation.
By disposing of this product correctly, you will help to conserve natural resources and will help
prevent potential negative effects on the environment and human health which could
otherwise be caused by inappropriate waste handling of this product. For more information
about collection point and recycling of this product, please contact your local municipal office,
your household waste disposal service or the shop where you purchased the product.
Penalties may be applicable for incorrect disposal of this waste, in accordance with national
legislation.
(Business users)
If you wish to dispose of this product, please visit our web page www.jvc-europe.com to
obtain information about the take-back of the product.
[Other Countries outside the European Union]
If you wish to dispose of this product, please do so in accordance with applicable national
legislation or other rules in your country for the treatment of old electrical and electronic
equipment.
Information for Users on Disposal of Old Equipment
EN 5
SOME DO’S AND DON’TS ON THE SAFE USE
OF EQUIPMENT
This equipment has been designed and
manufactured to meet international safety
standards but, like any electrical equipment,
care must be taken if you are to obtain the
best results and safety is to be assured.
DO read the operating instructions before you
attempt to use the equipment.
DO ensure that all electrical connections (including
the mains plug, extension leads and
interconnections between pieces of equipment) are
properly made and in accordance with the
manufacturer’s instructions. Switch off and withdraw
the mains plug when making or changing
connections.
DO consult your dealer if you are ever in doubt
about the installation, operation or safety of your
equipment.
DO be careful with glass panels or doors on
equipment.
DON’T continue to operate the equipment if you are
in any doubt about it working normally, or if it is
damaged in any way — switch off, withdraw the
mains plug and consult your dealer.
DON’T remove any fixed cover as this may expose
dangerous voltages.
DON’T leave equipment switched on when it is
unattended unless it is specifically stated that it is
designed for unattended operation or has a standby
mode. Switch off using the switch on the equipment
and make sure that your family knows how to do
this. Special arrangements may need to be made
for infirm or handicapped people.
DON’T use equipment such as personal stereos or
radios so that you are distracted from the
requirements of road safety. It is illegal to watch
television whilst driving.
DON’T listen to headphones at high volume, as
such use can permanently damage your hearing.
DON’T obstruct the ventilation of the equipment, for
example with curtains or soft furnishings.
Overheating will cause damage and shorten the life
of the equipment.
DON’T use makeshift stands and NEVER fix legs
with wood screws — to ensure complete safety
always fit the manufacturer’s approved stand or legs
with the fixings provided according to the
instructions.
DON’T allow electrical equipment to be exposed to
rain or moisture.
ABOVE ALL
● NEVER let anyone especially children push
anything into holes, slots or any other opening in
the case — this could result in a fatal electrical
shock;
● NEVER guess or take chances with electrical
equipment of any kind — it is better to be safe
than sorry!
6 EN
Wipe/Fader Effects
You can use the Wipe/Fader Effects to make
pro-style scene transitions. (墌 pg. 31)
Program AE, Effects and Special Effects
For example, “SPORTS” mode allows fast-
moving images to be captured one frame at a
time, for vivid, stable slow-motion. (墌 pg. 31)
Auto Button
You can change the recording mode between
manual setting to the standard mode setting
of the camcorder by pressing the AUTO
button. (墌 pg. 14)
Backlight Compensation
Simply pressing the BACKLIGHT button
brightens the image darkened by backlight.
(墌 pg. 29)
● You can also select a spot metering area so
that more precise exposure compensation
is available. (墌 pg. 29, Spot Exposure
Control)
Data Battery
You can check the battery status by simply
pressing the DATA button. (墌 pg. 13)
Major Features of this Camcorder
Fade in
Fade out
M
MAX TIMELEVEL
LCD
80min
FINDER
90min
100
%
50
0
BATTERY CONDITION
EN
7
CONTENTS
GETTING STARTED 8
Index................................................................. 8
Provided Accessories ..................................... 11
Power.............................................................. 12
Operation Mode.............................................. 14
Auto/Manual Mode ..................................... 14
Power-Linked Operation............................. 15
Language Settings..........................................15
Date/Time Settings ......................................... 15
Grip Adjustment.............................................. 15
Viewfinder Adjustment.................................... 16
Brightness Adjustment Of The Display........... 16
Tripod Mounting.............................................. 16
Loading/Unloading A Cassette....................... 17
VIDEO RECORDING & PLAYBACK 18
VIDEO RECORDING ........................................... 18
Basic Recording.............................................. 18
Tape Remaining Time ................................ 18
LCD Monitor And Viewfinder ...................... 18
Zooming...................................................... 19
Journalistic Shooting .................................. 19
Time Code .................................................. 19
Quick Review.............................................. 20
Recording From The Middle Of A Tape...... 20
VIDEO PLAYBACK ............................................. 21
Normal Playback............................................. 21
Still Playback .............................................. 21
Shuttle Search............................................ 21
Blank Search .............................................. 21
Playback Snapshot..................................... 21
Connections To A TV Or VCR........................ 22
ADVANCED FEATURES 23
MENUS FOR DETAILED ADJUSTMENT.................. 23
Changing The Menu Settings......................... 23
Recording Menus............................................ 24
Playback Menus ............................................. 26
FEATURES FOR RECORDING............................... 27
Wide Mode...................................................... 27
Night-Scope.................................................... 27
Snapshot (Record Still Image On Tape)......... 27
Manual Focus ................................................. 28
Exposure Control............................................ 28
Iris Lock .......................................................... 29
Backlight Compensation................................. 29
Spot Exposure Control.................................... 29
White Balance Adjustment.............................. 30
Manual White Balance Adjustment................. 30
Wipe Or Fader Effects .................................... 31
Program AE, Effects and Shutter Effects........31
EDITING............................................................ 33
Dubbing To A VCR ......................................... 33
Dubbing To A Video Unit Equipped With A DV
Connector (Digital Dubbing) ....................... 34
Connection To A Personal Computer............. 35
REFERENCES 36
TROUBLESHOOTING.......................................... 36
USER MAINTENANCE......................................... 39
CAUTIONS ........................................................40
SPECIFICATIONS................................................ 42
TERMS 43
8 EN
GETTING STARTED
Index
EN 9
GETTING STARTED
GETTING STARTED
Controls
A Rewind Button [
3
] (墌 pg. 21)
Left Button [ ] (墌 pg. 15)
Quick Review Button [QUICK REVIEW]
(墌 pg. 20)
B Set Button [SET] (墌 pg. 15)
Data Battery Button [DATA] (墌 pg. 13)
C Stop Button [8] (墌 pg. 21)
Backlight Compensation Button
[BACKLIGHT] (墌 pg. 29)
Down Button [ ] (墌 pg. 15)
D Play/Pause Button [4/9] (墌 pg. 21)
Manual Focus Button [FOCUS] (墌 pg. 28)
Up Button [ ] (墌 pg. 15)
E Wide 16:9 Button [16:9] (墌 pg. 27)
Blank Search Button [BLANK] (墌 pg. 21)
F Menu Button [MENU] (墌 pg. 23)
G Fast-Forward Button [
5
] (墌 pg. 21)
Right Button [ ] (墌 pg. 15)
Night Button [NIGHT] (墌 pg. 27)
H Dioptre Adjustment Control (墌 pg. 16)
I Auto Button [AUTO] (墌 pg. 14)
J Snapshot Button [SNAPSHOT] (墌 pg. 27)
K Power Zoom Lever [T/W] (墌 pg. 19)
Speaker Volume Control [VOL. +, –]
(墌 pg. 21)
L Battery Release Button [PUSH BATT.]
(墌 pg. 12)
M Recording Start/Stop Button (墌 pg. 18)
N Power Switch [REC, OFF, PLAY] (墌 pg. 14)
O Lock Button (墌 pg. 14)
P Cassette Open/Eject Switch [OPEN/EJECT]
(墌 pg. 17)
Connectors
The connectors are located beneath the covers.
Q Audio/Video Output Connector
[AV] (墌 pg. 22, 33)
R DC Input Connector [DC] (墌 pg. 12)
S Digital Video Connector [DV OUT] (i.LINK*)
(墌 pg. 34, 35)
* i.LINK refers to the IEEE1394-1995 industry
specification and extensions thereof. The logo
is used for products compliant with the i.LINK
standard.
Indicators
T POWER/CHARGE Lamp (墌 pg. 12, 18)
Other Parts
U LCD Monitor (墌 pg. 18)
V Viewfinder (墌 pg. 16)
W Battery Pack Mount (墌 pg. 13)
X Shoulder Strap Eyelet (墌 pg. 12)
Y Speaker (墌 pg. 21)
Z Grip Strap (墌 pg. 15)
a Lens
b Camera Sensor
(Be careful not to cover this area, a sensor
necessary for shooting is built-in here.)
c Stereo Microphone
d Stud Hole (墌 pg. 16)
e Tripod Mounting Socket (墌 pg. 16)
f Cassette Holder Cover (墌 pg. 17)
GETTING STARTED
10 EN
LCD Monitor/Viewfinder Indications
During Video Recording
a Auto/Manual Mode Indicator
A : Auto Mode
M : Manual Mode
B : Night-Scope Indicator (墌 pg. 27)
: Gain Up Mode (墌 pg. 24)
C Shutter Speed (墌 pg. 32)
D White Balance Indicator (墌 pg. 30)
E Effect Mode Indicator (墌 pg. 31)
F Program AE Mode Indicator (墌 pg. 32)
G SOUND 12BIT/16BIT: Sound Mode Indicator
(墌 pg. 24) (Appears for approx. 5 seconds
after turning on the camcorder).
H Battery Remaining Power Indicator
(墌 pg. 38)
I Approximate Zoom Ratio (墌 pg. 19)
J Zoom Indicator (墌 pg. 19)
K Digital Image Stabiliser (墌 pg. 24)
L Wide16:9 Mode Indicator (墌 pg. 27)
M Recording Speed Mode (SP/LP) (墌 pg. 24)
(Only LP Indicator is displayed)
N Tape Running Indicator (墌 pg. 18)
(Rotates while tape is running).
O Tape Remaining Time (墌 pg. 18)
P REC: (Appears during recording). (墌 pg. 18)
PAUSE: (Appears during Record-Standby
mode). (墌 pg. 18)
PHOTO: (Appears when taking snapshot).
(墌 pg. 27)
Q : Spot Exposure Control Indicator
(墌 pg. 29)
: Backlight Compensation Indicator
(墌 pg. 29)
: Iris Lock Indicator (墌 pg. 29)
±: Exposure Adjustment Indicator (墌 pg. 28)
R Wipe/Fader Mode Indicator (墌 pg. 31)
S Wind Cut Indicator (墌 pg. 25)
T Time Code (墌 pg. 25)
U Manual Focus Adjustment Indicator
(墌 pg. 28)
Brightness Control Indicator (LCD monitor/
Viewfinder) (墌 pg. 16)
V Date/Time (墌 pg. 15)
During Video Playback
a Battery Remaining Power Indicator
(墌 pg. 38)
B Blank Search Indicator (墌 pg. 21)
C Tape Speed (SP/LP) (墌 pg. 26)
(Only LP Indicator is displayed)
d Cassette Indicator
E 4: Playback
5
: Fast-Forward/Shuttle Search
3
: Rewind/Shuttle Search
9: Pause
F Date/Time (墌 pg. 15)
G VOLUME: Volume Level Indicator (墌 pg. 21)
BRIGHT: Brightness Control Indicator (LCD
monitor/Viewfinder) (墌 pg. 16)
H Time Code (墌 pg. 26)
I Sound Mode Indicator (墌 pg. 26)
4
5
6
1
2
3
9
0
p
8
B/W
1/50
q
w
e
t
y
u
i
o
r
7
10 x
a
s
1.1.2006
EXPOSURE
BRIGHT
1:15 PM
1.1.2006
15:29:03
12BIT
25min
VOLUME
1
9
2
5
4
3
6
8
7
BLANK SEARCH
PUSH "STOP" BUTTON
TO CANCEL
EN 11
GETTING STARTED
GETTING STARTED
Before Using This Camcorder
Make sure you only use cassettes with the Mini
DV mark .
This camcorder is designed exclusively for the
digital video cassette. Only cassettes marked
“ ” can be used with this unit.
Remember that this camcorder is not
compatible with other digital video formats.
Remember that this camcorder is intended for
private consumer use only.
Any commercial use without proper permission is
prohibited. (Even if you record an event such as a
show, performance or exhibition for personal
enjoyment, it is strongly recommended that you
obtain permission beforehand).
Before recording important video, be sure to
make a trial recording.
Play back your trial recording to make sure the
video and audio have been recorded properly.
We recommend cleaning your video heads
before use.
If you haven’t used your camcorder for a while, the
heads may be dirty. We recommend periodically
cleaning the video heads with a cleaning cassette
(optional).
Be sure to store your cassette tapes and
camcorder in the proper environment.
Video heads can become dirty more easily if your
cassette tapes and camcorder are stored in a dusty
area. Cassette tapes should be removed from the
camcorder and stored in cassette cases. Store the
camcorder in a bag or other container.
Use SP (Standard) mode for important video
recordings.
LP (Long Play) mode lets you record 50% more
video than SP (Standard) mode, but you may
experience mosaic-like noise during playback
depending on the tape characteristics and the
usage environment.
So, for important recordings, we recommend using
SP mode.
It is recommended that you use JVC brand
cassette tapes.
Your camcorder is compatible with all brands of
commercially available cassette tapes complying
with the MiniDV standard, but JVC brand cassette
tapes are designed and optimized to maximize the
performance of your camcorder.
Also read “CAUTIONS” on pages 40 – 41.
a AC Adapter AP-V17E or AP-V14E
b Power Cord (only for AP-V14E)
c Battery Pack BN-VF707U
d Audio/Video Cable(Ø3.5 mini-plug to RCA
plug)
e Shoulder Strap (墌 pg. 12 for attachment)
f Lens Cap (墌 pg. 12 for attachment)
NOTES:
● In order to maintain optimum performance of the
camcorder, provided cables may be equipped with
one or more core filter. If a cable has only one core
filter, the end that is closest to the filter should be
connected to the camcorder.
● Make sure to use the provided cables for
connections. Do not use any other cables.
Provided Accessories
OR
GETTING STARTED
12 EN
How To Attach The Lens Cap
To protect the lens, attach
the provided lens cap to the
camcorder as shown in the
illustration.
NOTE:
To confirm the lens cap is on
correctly make sure the cap is
flush to the camcorder.
How To Attach The Shoulder Strap
Follow the illustration.
1 Thread the strap through the eyelet.
2 Fold it back and thread it through the strap
guide and the buckle.
● To adjust the length of the strap, loosen and then
tighten the strap in the buckle.
3 Slide the strap guide fully towards the eyelet.
This camcorder’s 2-way power supply system
lets you choose the most appropriate source of
power. Do not use provided power supply units
with other equipment.
Charging The Battery Pack
1 Set the Power Switch to “OFF”.
2 With the arrow on the battery pack pointing
downward, push the battery pack slightly against
the battery pack mount a.
3 Slide down the battery pack until it locks in
place b.
4 Connect the AC Adapter to the camcorder.
5 Connect the Power Cord to the AC Adapter.
(AP-V14E only)
6 Plug the AC Adapter into an AC outlet. The
POWER/CHARGE lamp on the camcorder
blinks to indicate charging has star ted.
7 When the POWER/CHARGE lamp goes out,
charging is finished. Unplug the AC Adapter
from the AC outlet. Disconnect the AC Adapter
from the camcorder.
Place here during
shooting.
3
2
2
1
Strap guide
Buckle
Eyelet
Power
To D C
connector
To AC o utle t
Battery pack
Power
switch
Battery pack mount
POWER/
CHARG
E
lamp
PUSH
BATT.
Arrow
AC Adapter (ex. AP-V17E)
EN 13
GETTING STARTED
GETTING STARTED
To detach the battery pack
Slide the battery pack upward while pressing
PUSH BATT. to detach it.
* Provided
NOTES:
● It is recommended that only genuine JVC
batteries are used in this camcorder. Using
generic non-JVC batteries can cause damage
to the internal charging circuitry.
● If the protective cap is attached to the battery
pack, remove it first.
● During charging, the camcorder cannot be
operated.
● Charging is not possible if the wrong type of
battery is used.
● When charging the battery pack for the first time
or after a long storage period, the POWER/
CHARGE lamp may not light. In this case, remove
the battery pack from the camcorder, then try
charging again.
● If the battery operation time remains extremely
short even after having been fully charged, the
battery is worn out and needs to be replaced.
Please purchase a new one.
● Since the AC Adapter processes electricity
internally, it becomes warm during use. Be sure to
use it only in well-ventilated areas.
● Using the optional AA-VF7 Battery Charger, you
can charge the BN-VF707U/VF714U/VF733U
battery pack without the camcorder.
● After 5 minutes has elapsed in Record-Standby
mode with the cassette inserted, and no operation
is performed (
“T PAUSE” indicator may not
appear), the camcorder will automatically turn off
its power supplied from the AC adapter. In this
case, the battery charge starts if the battery is
attached to the camcorder.
Using The Battery Pack
Perform steps 2 – 3 in “Charging The Battery
Pack”.
Maximum continuous recording time
* Provided
NOTES:
● Recording time is reduced significantly under the
following conditions:
• Zoom or Record-Standby mode is engaged
repeatedly.
• The LCD monitor is used repeatedly.
• The playback mode is engaged repeatedly.
● Before extended use, it is recommended that you
prepare enough battery packs to cover 3 times the
planned shooting time.
A
TTENTION:
Before detaching the power source, make sure that
the camcorder’s power is turned off. Failure to do so
can result in a camcorder malfunction.
Data Battery System
You can check the remaining battery power and
the recordable time.
1) Make sure the battery is attached and the
Power Switch is set to “OFF”.
2) Open the LCD monitor fully.
3) Press DATA, and the batter y status screen
appears.
● It is displayed for 5 seconds if the button is
pressed and released quickly, and for 15
seconds if the button is pressed and hold for
several seconds.
● If “COMMUNICATION ERROR” appears
instead of the battery status even though you
tried to press DATA several times, there may
be a problem on the battery. In such a case,
consult your nearest JVC dealer.
Battery pack Charging time
BN-VF707U* Approx. 1 hr. 30 min.
BN-VF714U Approx. 2 hr. 40 min.
BN-VF733U Approx. 5 hr. 40 min.
Battery pack
LCD monitor
on
Viewfinder on
BN-VF707U* 1 hr. 30 min. 1 hr. 40 min.
BN-VF714U 3 hr. 3 hr. 25 min.
BN-VF733U 7hr. 8hr.
GETTING STARTED
14 EN
Using AC Power
Perform steps 4 – 6 in “Charging The Battery
Pack”.
NOTE:
The provided AC Adapter features automatic
voltage selection in the AC range from 110 V to
240 V.
About Batteries
DANGER! Do not attempt to take the batteries
apart, or expose them to flame or excessive
heat, as it may cause a fire or explosion.
WARNING! Do not allow the battery or its
terminals to come in contact with metals, as this
can result in a short circuit and possibly start a
fire.
To resume the original function of the
accurate battery power indication
If the battery power indication differs from the
actual operating time, fully charge the battery,
and then run it down. However this function may
not turn back if the battery was used for a long
period of time under extremely high/low
temperature condition or charged too many
times.
To turn on the camcorder, set the Power Switch
to any operation mode except “OFF” while
pressing down the Lock Button located on the
switch.
Choose the appropriate operation mode
according to your preference using the Power
Switch.
Auto/Manual Mode
Press AUTO button repeatedly to switch to auto/
manual recording mode. When manual mode is
selected, the indicator “M” appears on the LCD
monitor.
Auto Mode: A
You can record using no special effects or
manual adjustments.
Manual Mode: M
Manual recording is possible by setting various
functions.
Operation Mode
Power Switch Position
REC:
● Allows you to perform recording on the tape.
● Allows you to set various recording functions
using the Menus. (墌 pg. 23)
OFF:
Allows you to switch off the camcorder.
PLAY:
● Allows you to play back a recording on the
tape.
● Allows you to set various playback functions
using the Menus. (墌 pg. 23)
POWER/
CHARGE
lamp
Lock Button
MENU
AUTO
Loading...