Hobart DA2 User Manual
Item # ________________________________
Quantity _______________________________
C.S.I. Section 11400
D SERIES MEDIUM TEMPERATURE/
FOOD EQUIPMENT
STANDARD FEATURES
■ Stainless Steel Top Trim
■ Exterior Stainless Steel Door
■ DuraFinish Aluminum on exterior sides and
interior.
■ Stainless Steel interior floor
■ Condensing unit mounted on the top
■ Hot gas condensate removal
■ R134a Refrigerant in medium temperature
cabinets
■ R404a Refrigerant in frozen food cabinets
■ Solid Doors Field Rehingeable
■ Exterior, drum type thermometer is standard.
■ Easily Removable Door Gasket without the Use
of Tools
■ 120/601 Units have Ten Foot Cord and Plug
FROZEN FOOD REACH-INS
MODELS
❑ DA1 – Single Section Refrigerator
❑ DA2 – Two Section Refrigerator
❑ DA3 – Three Section Refrigerator
❑ DAF1 – Single Section Frozen Food Cabinet
❑ DAF2 – Two Section Frozen Food Cabinet
❑ DAF3 – Three Section Frozen Food Cabinet
ACCESSORIES:
❑ Heavy Duty Shelves
❑ Stainless Steel Shelves
❑ Pull Out Shelves
❑ CFP Pan File
❑ FF10 Food File
❑ HRW 18 Bakers File
❑ CP1 Pan File
❑ CUS Universal Slide
D SERIES MEDIUM TEMPERATURE/FROZEN FOOD REACH-INS
OPTIONS
❑ Half Height Hinged Solid Stainless Steel
❑ Full Height Hinged Glass (Refrigerator Only)
❑ Half Height Hinged Glass (Refrigerator Only)
R
❑ Casters
❑ Legs
Specifications, Details and Dimensions on Inside and Back.
Model DA2
701 S Ridge Avenue, Troy, OH 45374 • 937-332-3000 • 1-800-333-7447
D SERIES MEDIUM TEMPERATURE/
FROZEN FOOD REACH-INS
SELLING FEATURES
EASILY REMOVABLE GASKETS: Solid door gaskets are
easily removed without tools for cleaning or replacement,
eliminating the expense of a service call.
FIELD REHINGEABLE DOOR: Maximum flexibility for
layout changes.
WARRANTY: The D series cabinet warranty is for one
year. It includes parts, labor, and travel during normal
working hours in the Continental United States.
Exterior: Front housing and ends are DuraFinish .040
inch aluminum. Front frame is extruded thermal plastic
providing an efficient thermal break between cabinet
exterior and interior. Anti-condensate door perimeter
heater wires are not required on refrigerators. Exterior
top, back and bottom are galvanized steel. Doors, front
housing and trim are stainless steel.
Interior: Liner is crimped construction DuraFinish .032
inch aluminum with 3/8” radius bends. Door interior liners
are one-piece ABS thermoplastic. Liner bottom is .029
inch stainless steel.
REFRIGERATION SYSTEM: Unitized and located on top
of the cabinet consisting of:
FOOD EQUIPMENT
■ Condenser fan and fan motor.
■ Heavy duty condenser, copper and aluminum
designed to match motor compressor rating.
■ Evaporator Coil, epoxy coated, copper tube, aluminum
fin. Design sized to match motor compressor rating and
provide proper humidity conditions in the storage
compartment.
■ Evaporator fan and fan motor.
■ Removable, insulated coil housing.
■ Thermostatic Temperature Control.
■ Refrigeration inside cabinet is by fan circulated air
which is drawn up through vents in the ceiling, passed
through cooling coils, and returned to the cabinet
through a diffuser located along the sidewall on single
section units and the backwall on two and three section
units.
■ Motor-Compressor, high starting torque, hermetic,
rated as follows:
■ Refrigerators:
❑ 1 Section –
1
⁄4 h.p. and rated 1850 BTU at 90°F
ambient and 20°F evaporator
temperature.
❑ 2 Section –
1
⁄3 h.p. and rated 2400 BTU at 90°F
ambient and 20°F evaporator
temperature.
❑ 3 Section –
1
⁄3 h.p. and rated 2400 BTU at 90°F
ambient and 20°F evaporator
temperature.
■ Frozen Food:
❑ 1 Section –
1
⁄2 h.p. and rated 1650 BTU at 90°F
ambient and -15°F evaporator
temperature.
3
❑ 2 Section –
⁄4 h.p. and rated 3100 BTU at 90°F
ambient and -15°F evaporator
temperature.
❑ 3 Section – 1 h.p. and rated 4800 BTU at 90°F
ambient and -15°F evaporator
temperature.
Loading...