Shelleyglas |
TM |
|
|
Project ___________________________________ |
|
|
|
|
|
||
|
|
|
|
Item _____________________________________ |
|
by Del eld |
|
|
|
||
|
|
|
Quantity _ ________________________________ |
||
|
|
|
|
|
|
KHC-NU |
|
|
|
CSI Section 11400 |
|
|
|
|
Approved _ _______________________________ |
||
|
|
|
Date _____________________________________ |
||
Mobile Hot and Cold Combination Counters |
|
|
|||
|
|
||||
|
|
|
|
|
|
Models |
|
|
|
|
|
•KHC-50-NU |
One hot well, 26” x 21.62” cold pan |
•KHC-96-NU |
One hot well, 65” x 21.62” cold pan |
||
•KHC-60-NU |
One hot well, 26” x 21.62” cold pan |
•KH2C-96-NU |
Two hot wells, 52” x 21.62” cold pan |
||
•KHC-74-NU |
One hot well, 39” x 21.62” cold pan |
•KH3C-96-NU |
Three hot wells, 39” x 21.62” cold pan |
||
•KH2C-74-NU |
Two hot wells, 26” x 21.62” cold pan |
•KH4C-96-NU |
Four hot wells, 26” x 21.62” cold pan |
KH2C-74-NU
shown with option fold-down tray slide, folddown work shelf and flip-up sneezeguard
Standard Features |
|
• |
One year parts and 90 day labor |
|||
|
|
|
|
|
|
low |
• One piece, molded fiberglass pylon (base), fully |
|
standard warranty |
||||
• All corners and center sides |
reinforced with |
Options & |
||||
|
rounded corners, permanent color |
|
|
|
||
|
galvanized bracing, laminated into the |
Accessories |
||||
|
fiberglass |
|
|
|
|
|
• |
14-gauge tops |
|
|
|
• |
Tray slides and work shelf shelves |
• Standard on 5” polyurethane swivel casters |
• |
Line-up interlock device |
||||
• Easy to use stainless steel interlock system is |
• |
Food shields |
||||
|
standard on base and tray slides |
|
• |
12” (30.5cm) wide 18-gauge stainless |
||
• A maximum 10’ long cord and plug |
|
|
steel overshelf |
|||
• |
Enclosed bases |
|
|
|
• |
Incandescent light fixtures* |
• Top has one to four electrically heated, recessed |
• |
Radiant or bullet style heat lamps* |
||||
|
die-stamped stainless steel hot food warmers. |
• |
Open understorage with shelf |
|||
• Each warmer accommodates a 12” x 20” x 6” |
• |
120V/60Hz/1ø, 10 amp convenience |
||||
|
pan (pans supplied by others) |
|
|
|
outlet with breaker* |
|
• All body cutouts |
reinforced |
with |
14-gauge |
• |
Drains from food wells, plumbed to |
|
|
channel supports |
|
|
|
|
common valve |
• Insulated ice pan is 7” deep and constructed |
• |
Molded fiberglass trim strips |
||||
|
of 22-gauge stainless steel. Perforated false |
• |
6”(15cm) high adjustable stainless steel |
|||
|
bottom, and drain with valve is standard |
|
legs in lieu of casters |
|||
• Environmentally |
friendly, |
Kyoto |
Protocol |
* |
Inclusion of these options will alter the |
|
|
Compliant, Non ODP (Ozone Depletion |
|
electrical specifications of unit |
|||
|
Potential), Non GWP (Global Warming Potential) |
|
|
|||
|
polyurethane insulation keeps energy costs |
|
|
Specifications
Exterior Body is seamless, one-piece molded fiberglass, having perfectly smooth exterior surface with all corners fully rounded. The fiberglass reinforced polyester (F.R.P.) is molded with permanent color. Stress points are internally reinforced.
Exterior top is constructed of 14-gauge stainless steel, welded, ground and polished into one integral unit. Top is fabricated with square exterior corners. Top has one to four electrically heated, recessed, die-stamped stainless steel hot food warmers. Each warmer accommodates one 12.75” x 20.75” x 6” (32cm x 53cm x 15cm) pan.
Heated food warmers are constructed of die-stamped stainless steel. Each Heated food warmer is individually equipped with a heated element rated at 1000 watts for 120 volt or 208/230 volt, 60 hertz, single phase service and wired to an adjustable control switch and indicator light in the control panel. Heated food warmers are interwired to a 3 or 4-wire, grounded plug for 120 volt or 208/230 volt, 60 hertz, single phase electrical service. The maximum cord length is 10’. Unit has on/off switch mounted on the exterior.
Insulated ice pan is 7" (18cm) deep and constructed of 22-gauge stainless steel. A removable, perforated false bottom 1" (2.5cm) high, constructed of stainless steel is supplied. The ice pan is separated from the exterior top by a concealed breaker strip and fully insulated with foamed-in- place environmentally friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential) polyurethane insulation. Ice pan is equipped with a drain valve located at the bottom of the unit.
Casters: Unit is mounted on 5” (13cm) diameter swivel casters with non-marking polyurethane tires and plate brakes. Overall height of caster assembly is 6.00” (15cm).
980 S. Isabella Rd. |
Phone: 800-733-8948 or 989-773-7981 |
www.delfield.com |
|
Mt. Pleasant, Michigan 48858 |
|||
Fax: 800-669-0619 |
|||
|
|
||
|
|
|
Counters Combination Cold and Hot Mobile NU:-KHC