|
|
|
|
Project __________________________________ |
|
|
|
|
Item ____________________________________ |
|
|
|
|
Quantity ________________________________ |
N8200 |
|
|
CSI Section 11400 |
|
|
|
Approved _______________________________ |
||
|
|
Date ____________________________________ |
||
Drop-In Self-Contained Frost Top |
|
|
||
|
|
|||
|
|
|
|
|
Models |
|
|
|
|
N8231 |
31” frost top |
N8273 |
73” frost top |
|
N8245 |
45” frost top |
N8287 |
87” frost top |
|
N8259 59” frost top
|
Standard Features |
|
|
|
• NSF certified |
|
• Polyurethane foam insulation |
|
• On/off switch |
|
• Raised stainless steel top with full |
|
perimeter drain trough and 1/2” drain |
|
• Environmentally friendly HFC-404A |
N8259 |
refrigerant |
• Stainless steel louver provided |
|
|
• Push-in perimeter gasket |
|
|
Options &
Accessories
•Single or double service flip-up sneezeguards
•Relocate compressor
•* 220V/50 cycle electrical system
*Inclusion of this option will alter electrical specifications of the unit.
Specifications
Top is one-piece, heavy-gauge stainless steel. Top has a drain trough and 2” (5.1cm) overhang around perimeter. Top is elevated 1.68” (2.5cm) above counter surface. Refrigeration lines are secured to the underside of the top and insulated with high-density, closed-cell polyurethane. Exterior housing is heavy-gauge galvanized steel.
Condensing unit is suspended below the frost top on a heavy-gauge steel frame. Condensing unit uses HFC-404a refrigerant. Unit has an ON/OFF toggle switch, an 8’ (2.4m) cord and NEMA 5-15 plug. Unit has (1) stainless steel louver provided for field installation; cutout dimensions are 12” x 23.5” (30.5cm x 59.7cm). A second opening at the rear of the cabinet must be provided at installation to allow for proper air circulation.
<![endif]>Top Frost N8200:
980 S. Isabella Rd. |
Phone: 800-733-8948 or 989-773-7981 |
|
|
Mt. Pleasant, Michigan 48858 |
www.delfield.com |
||
Fax: 800-669-0619 |
|||
|
|
||
|
|
|
Loading...