Delfield DC-MC2, DC-MC4, DC-MC5, DC-MC6 General Manual

		Project ___________________________________
		Item _____________________________________
	Concepts™ Serving Systems	Quantity _ ________________________________
		CSI Section 11400
	Self-Contained Mechanically Cooled Serving Counter	Approved _ _______________________________
		Date _____________________________________
	Models

•	DC-MC2	Self-contained mechanically cooled serving counter, fits two standard 12”x20” pans
•	DC-MC3	Self-contained mechanically cooled serving counter, fits three standard 12”x20” pans
•	DC-MC4	Self-contained mechanically cooled serving counter, fits four standard 12”x20” pans
•	DC-MC5	Self-contained mechanically cooled serving counter, fits five standard 12”x20” pans
•	DC-MC6	Self-contained mechanically cooled serving counter, fits six standard 12”x20” pans

	Standard Features
	• NSF-7 certified performance
	• Heavy duty stainless steel top
	• Reinforced			stainless steel front			and rear
		removable panels
	• Heavy duty base support structure
	• Standard on 6” legs
	• Integral V-stamp pan rest
	•	1” drain
	• Must be fixed hard wired
	• High		density		foamed in		place
		environmentally friendly,				Kyoto	Protocol
		Compliant, Non ODP (Ozone Depletion
		Potential), Non GWP (Global Warming
		Potential) polyurethane keeps energy costs
		low
	• Environmentally friendly R-404A refrigerant
DC-MC4	•	Thermostat for temperature control
	•	36” work height
	• One		year	parts	and	labor	standard
		warranty

Options &

Accessories

•Custom lengths available per inch

•Granite, Hanstone and Solid Surface top materials

•Laminated base panels

•Finished stainless steel or laminated end panels

•Décor panels

•Graphics packages

•FlexiShield® foodshields

•Signage with overstructures, lights and heatlamps

•Refrigerated base inserts

•Heated base inserts

•Dry storage base inserts

•Mechanical access doors

•Casters (stand alone units only)

•Kickplates (units with legs only)

•Adapter plates and bars

•Remote refrigeration (specify refrigerant)

•Tray slides

•34” work height

•220V/50 cycle*

*Inclusion of this option will alter electrical specifications of the unit

Specifications

Exterior body is constructed of 0.75” Melamine reinforced front and rear panels with 22 gauge stainless steel skin and 1” polyethylene horizontal rib supports. Horizontal brace on rear is constructed of 18 gauge galvanized steel. The exterior ends are unfinished.

Exterior top is constructed of 14 gauge stainless steel. Horizontal top supports on front and rear are constructed with 18 gauge galvanized steel. Top end supports are 12 gauge stainless steel.

Interior base bottom is constructed of 16 gauge galvanized steel. Vertical base support braces are 14 gauge galvanized steel.

The refrigerated cold pan is 9” (23cm) deep and constructed of stainless steel. The cold pan is separated from the exterior top by a thermal break. Copper refrigeration tubing is attached to the sides and bottom of the cold pan and is fully insulated with foamed in place environmentally friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential) polyurethane insulation. Cold pan

is equipped with a 1” (2.5cm) I.P.S. drain plumbed to the drain valve located behind the hinged louvered door. Temperatures of 33°F (1°C) to 41°F (5°C) are maintained with pans recessed 3” (7.6cm) at 86°F ambient room temperature. Pans by others.

Refrigeration system uses R-404A refrigerant and has a selfcontained 115 volt, 60 Hertz, single phase hermetically sealed condensing unit with adjustable cold pan pressure control.

Legs: Bases mounted on 6.12” adjustable legs.

	980 S. Isabella Rd.	Phone: [phone] or 989-773-7981	www.delfield.com
	Mt. Pleasant, Michigan 48858
		Fax: [phone]

<![if ! IE]>

<![endif]>Counter Serving Cooled Mechanically Contained-Self Systems: Serving Concepts™